[PATCH] ata: pata_at91.c bugfix for high master clock
Sergey Matyukevich
geomatsi at gmail.com
Sat Dec 11 14:16:45 EST 2010
Hello Igor,
On Fri, 10 Dec 2010 23:03:50 +0300
Igor Plyatov <plyatov at gmail.com> wrote:
> The AT91SAM9 microcontrollers with master clock higher then 105 MHz
> and PIO0, have overflow of the NCS_RD_PULSE value in the MSB. This
> lead to "NCS_RD_PULSE" pulse longer then "NRD_CYCLE" pulse and
> pata_at91 driver does detect ATA device.
>
> Signed-off-by: Igor Plyatov <plyatov at gmail.com>
> ---
> drivers/ata/pata_at91.c | 11 +++++++++--
> 1 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
> index 0da0dcc..2e189be 100644
> --- a/drivers/ata/pata_at91.c
> +++ b/drivers/ata/pata_at91.c
> @@ -33,12 +33,14 @@
>
>
> #define DRV_NAME "pata_at91"
> -#define DRV_VERSION "0.1"
> +#define DRV_VERSION "0.2"
>
> #define CF_IDE_OFFSET 0x00c00000
> #define CF_ALT_IDE_OFFSET 0x00e00000
> #define CF_IDE_RES_SIZE 0x08
>
> +#define NCS_RD_PULSE_LIMIT 0x3f /* maximal value for pulse
> bitfields */ +
> struct at91_ide_info {
> unsigned long mode;
> unsigned int cs;
> @@ -50,7 +52,7 @@ struct at91_ide_info {
> };
>
> static const struct ata_timing initial_timing =
> - {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
> + {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 0, 600, 0};
>
> static unsigned long calc_mck_cycles(unsigned long ns, unsigned long
> mck_hz) {
> @@ -109,6 +111,11 @@ static void set_smc_timing(struct device *dev,
> /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX)
> timings */ ncs_read_setup = 1;
> ncs_read_pulse = read_cycle - 2;
> + if (ncs_read_pulse > NCS_RD_PULSE_LIMIT) {
> + ncs_read_pulse = NCS_RD_PULSE_LIMIT;
> + dev_dbg(dev, "ncs_read_pulse limited to maximal
arguably 'dev_warn' would be more useful in this case
> value %lu\n",
> + ncs_read_pulse);
> + }
>
> /* Write timings same as read timings */
> write_cycle = read_cycle;
Thanks for the fix.
Acked-by: Sergey Matyukevich <geomatsi at gmail.com>
Best regards,
Sergey
More information about the linux-arm-kernel
mailing list