[PATCH v9 6/6] davinci: USB1.1 support for Omapl138-Hawkboard

[Sergei Shtylyov]

Hello.

On 06-12-2010 14:12, Nori, Sekhar wrote:

>>   arch/arm/mach-davinci/board-omapl138-hawk.c |   38 ++++++++++++++++++++------
>>   1 files changed, 29 insertions(+), 9 deletions(-)

>> diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c
>> b/arch/arm/mach-davinci/board-omapl138-hawk.c
>> index da51136..8fc78f2 100644
>> --- a/arch/arm/mach-davinci/board-omapl138-hawk.c
>> +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
[...]
>> @@ -165,13 +165,23 @@ static __init void omapl138_hawk_mmc_init(void)
>>        if (ret<  0) {
>>                pr_warning("%s: can not open GPIO %d\n",
>>                        __func__, DA850_HAWK_MMCSD_WP_PIN);
>> -             return;
>> +             goto exp_setup_wp_fail;
>>        }
>>
>>        ret = da8xx_register_mmcsd0(&da850_mmc_config);
>> -     if (ret)
>> +     if (ret) {
>>                pr_warning("%s: MMC/SD0 registration failed: %d\n",
>>                        __func__, ret);
>> +             goto exp_setup_mmcsd_fail;
>> +     }
>> +             return;

> This return has extra indentation.

>> +
>> +exp_setup_mmcsd_fail:
>> +     gpio_free(DA850_HAWK_MMCSD_WP_PIN);
>> +exp_setup_wp_fail:
>> +     gpio_free(DA850_HAWK_MMCSD_CD_PIN);
>> +exp_setup_cd_fail:
>> +             return;

> This one too.

    Moreover, it's not needed at all.

> Other than that, it all looks good to me.

    Except those 'exp_setup_'prefixes which I'm not sure where are coming from...

> Thanks,
> Sekhar

WBR, Sergei