[PATCHv3 4/4] mc13xxx: Add i2c and spi drivers to Kconfig and Makefile

[Uwe Kleine-König]

On Mon, Dec 20, 2010 at 02:50:55PM +1100, Marc Reilly wrote:
> Signed-off-by: Marc Reilly <marc at cpdesign.com.au>
> ---
>  drivers/mfd/Kconfig  |   22 ++++++++++++++--------
>  drivers/mfd/Makefile |    2 ++
>  2 files changed, 16 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3a1493b..6980cf2 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -424,20 +424,26 @@ config MFD_PCF50633
>  	  facilities, and registers devices for the various functions
>  	  so that function-specific drivers can bind to them.
>  
> -config MFD_MC13783
> -	tristate
> -
this needs at least a note in the commit log.  And $(git grep
MFD_MC13783 drivers) shows that you don't want to remove that yet.

>  config MFD_MC13XXX
> -	tristate "Support Freescale MC13783 and MC13892"
> -	depends on SPI_MASTER
> +	tristate "Support Freescale MC13XXX"
Hmm, I'd prefer to have the supported numbers.  Consider FSL releasing
an MC13991.  Then it's unclear if MFD_MC13XXX supports it.

> +	depends on SPI_MASTER || I2C
>  	select MFD_CORE
> -	select MFD_MC13783
>  	help
>  	  Support for the Freescale (Atlas) PMIC and audio CODECs
>  	  MC13783 and MC13892.
> -	  This driver provides common support for accessing  the device,
> +	  This driver provides common support for accessing the device,
>  	  additional drivers must be enabled in order to use the
> -	  functionality of the device.
> +	  functionality of these devices.
> +
> +config MFD_MC13XXX_SPI
> +	tristate "Support for MC13XXX via SPI"
> +	depends on SPI_MASTER
> +	select MFD_MC13XXX
> +
> +config MFD_MC13XXX_I2C
> +	tristate "Support for MC13XXX via I2C"
and only mc13892 can do i2c, so writing MC13XXX doesn't make sense here.

> +	depends on I2C
> +	select MFD_MC13XXX
Hmm, that means that MFD_MC13XXX alone doesn't do anything useful,
right?  IMHO either do:

	config MFD_MC13XXX_SPI
		tristate

	config MFD_MC13XXX_I2C
		tristate

	config MFD_MC13XXX
		tristate "..."
		select MFD_MC13XXX_SPI if SPI_MASTER
		select MFD_MC13XXX_I2C if I2C
		...

or

	config MFD_MC13XXX
		tristate
		...

	config MFD_MC13XXX_SPI
		tristate "..."
		select MFD_MC13XXX
		...
	config MFD_MC13XXX_I2C
		tristate "..."
		select MFD_MC13XXX
		...

>  config PCF50633_ADC
>  	tristate "Support for NXP PCF50633 ADC"
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index f54b365..b7d774f 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -42,6 +42,8 @@ obj-$(CONFIG_TWL4030_CODEC)	+= twl4030-codec.o
>  obj-$(CONFIG_TWL6030_PWM)	+= twl6030-pwm.o
>  
>  obj-$(CONFIG_MFD_MC13XXX)	+= mc13xxx-core.o
> +obj-$(CONFIG_MFD_MC13XXX_SPI)	+= mc13xxx-spi.o
> +obj-$(CONFIG_MFD_MC13XXX_I2C)	+= mc13xxx-i2c.o
>  
>  obj-$(CONFIG_MFD_CORE)		+= mfd-core.o

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |