[PATCH v2 0/2] OMAP: I2C and UART device name cleanup

Benoit Cousson b-cousson at ti.com
Thu Dec 9 09:24:15 EST 2010


Hi All,

In order to enforce a little bit of consistency in the omap devices name,
the convention for omap devices name will be now omap_xxx. All the drivers
adapted to hwmod will be named like that during the on-going adaptations.

The I2C and UART drivers are already adapted to hwmod but with
the originals name.

Rename i2c and uart using this convention:
i2c_omap -> omap_i2c
omap-hsuart -> omap_uart

Tested on OMAP4 ES2 on Panda / sdp4430. Some more validation will be needed on OMAP2 & 3.

This series is based on Kevin's pm-hwmod-i2c branch and is available here:
git://gitorious.org/omap-pm/linux.git for_2.6.38/device_name

Regards,
Benoit


v1
    http://www.spinics.net/lists/linux-omap/msg41474.html
    
    Merge previous patch #1 and #2 as suggested by Kevin to change the driver name 
    at the same time with the device name in the clockdev.


Benoit Cousson (2):
  I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c
  OMAP: serial: Change device name: omap-hsuart -> omap_uart

 arch/arm/mach-omap1/clock_data.c              |    6 +++---
 arch/arm/mach-omap2/clock2420_data.c          |    8 ++++----
 arch/arm/mach-omap2/clock2430_data.c          |    8 ++++----
 arch/arm/mach-omap2/clock3xxx_data.c          |   12 ++++++------
 arch/arm/mach-omap2/clock44xx_data.c          |   16 ++++++++--------
 arch/arm/plat-omap/i2c.c                      |    2 +-
 arch/arm/plat-omap/include/plat/omap-serial.h |    2 +-
 drivers/i2c/busses/i2c-omap.c                 |    4 ++--
 8 files changed, 29 insertions(+), 29 deletions(-)




More information about the linux-arm-kernel mailing list