[PATCH 3/6] omap3: igepv2: Don't call gpio_set_value right aftergpio_direction_output

[Tony Lindgren]

From: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

gpio_direction_output() has a value argument, there's no need to call
gpio_set_value() explicitly right after.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Acked-by: Enric Balletbo i Serra <eballetbo at gmail.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
 arch/arm/mach-omap2/board-igep0020.c |   20 ++++++++------------
 1 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 3bee9a1..77e2db7 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -377,24 +377,21 @@ static void __init igep2_leds_init(void)
 static inline void igep2_leds_init(void)
 {
 	if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
+	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 0) == 0))
 		gpio_export(IGEP2_GPIO_LED0_RED, 0);
-		gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
-	} else
+	else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
 
 	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
+	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 0) == 0))
 		gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
-		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
-	} else
+	else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
 
 	if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
+	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 0) == 0))
 		gpio_export(IGEP2_GPIO_LED1_RED, 0);
-		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
-	} else
+	else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
 
 }
@@ -426,10 +423,9 @@ static int igep2_twl_gpio_setup(struct device *dev,
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
 #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
 	if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)
-	    && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) {
+	    && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 0) == 0))
 		gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
-		gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0);
-	} else
+	else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n");
 #else
 	igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;