[PATCH v3 01/15] ARM: mxs: Add core definitions
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Tue Dec 7 15:18:16 EST 2010
On Wed, Dec 08, 2010 at 12:31:52AM +0800, Shawn Guo wrote:
> Add core definitions for MXS-based SoC MX23 and MX28.
>
> Signed-off-by: Shawn Guo <shawn.guo at freescale.com>
> ---
> Changes for v3:
> - Update MXS_IO_P2V definition and comment to get them matched
> - Sort mx23 base address definitions by offset
> - Remove mx28 reserved IRQ definitions
> - Remove unnecessary dummy definitions for cpu_is_mx23() and cpu_is_mx28()
>
> Changes for v2:
> - Remove MXS_IO_P2V_MODULE from hardware.h which is not needed
> - Simplify MXS_IO_P2V_MODULE definition in hardware.h
> - Remove unnecessary inclusion protection from hardware.h
> - Change cpu_is_mx23/mx28() implementation in mxs.h to use machine_is_xxx
>
> arch/arm/mach-mxs/include/mach/hardware.h | 55 +++++++++
> arch/arm/mach-mxs/include/mach/irqs.h | 32 +++++
> arch/arm/mach-mxs/include/mach/memory.h | 24 ++++
> arch/arm/mach-mxs/include/mach/mx23.h | 147 ++++++++++++++++++++++
> arch/arm/mach-mxs/include/mach/mx28.h | 190 +++++++++++++++++++++++++++++
> arch/arm/mach-mxs/include/mach/mxs.h | 34 +++++
> 6 files changed, 482 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-mxs/include/mach/hardware.h
> create mode 100644 arch/arm/mach-mxs/include/mach/irqs.h
> create mode 100644 arch/arm/mach-mxs/include/mach/memory.h
> create mode 100644 arch/arm/mach-mxs/include/mach/mx23.h
> create mode 100644 arch/arm/mach-mxs/include/mach/mx28.h
> create mode 100644 arch/arm/mach-mxs/include/mach/mxs.h
>
> diff --git a/arch/arm/mach-mxs/include/mach/hardware.h b/arch/arm/mach-mxs/include/mach/hardware.h
> new file mode 100644
> index 0000000..d73f149
> --- /dev/null
> +++ b/arch/arm/mach-mxs/include/mach/hardware.h
> @@ -0,0 +1,55 @@
> +/*
> + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
> + * Copyright 2008 Juergen Beisert, kernel at pengutronix.de
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#ifndef __MACH_MXS_HARDWARE_H__
> +#define __MACH_MXS_HARDWARE_H__
> +
> +#include <asm/sizes.h>
> +
> +#ifdef __ASSEMBLER__
> +#define IOMEM(addr) (addr)
> +#else
> +#define IOMEM(addr) ((void __force __iomem *)(addr))
> +#endif
> +
> +/*
> + * It maps the whole address space to [0xf4000000, 0xf5ffffff].
The maximal address that can occur is 0xf50fffff
> + *
> + * OCRAM 0x00000000+0x020000 -> 0xf4000000+0x020000
> + * IO 0x80000000+0x100000 -> 0xf5000000+0x100000
> + */
> +#define MXS_IO_P2V(x) (0xf4000000 + \
> + (((x) & 0x80000000) >> 7) + \
> + (((x) & 0x000fffff)))
> +
> +
> +#define MXS_IO_ADDRESS(x) IOMEM(MXS_IO_P2V(x))
> +
> +#include <mach/mx23.h>
> +#include <mach/mx28.h>
> +#include <mach/mxs.h>
> +
> +#define mxs_map_entry(soc, name, _type) { \
> + .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
> + .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \
> + .length = soc ## _ ## name ## _SIZE, \
> + .type = _type, \
> +}
> +
> +#endif /* __MACH_MXS_HARDWARE_H__ */
> diff --git a/arch/arm/mach-mxs/include/mach/irqs.h b/arch/arm/mach-mxs/include/mach/irqs.h
> new file mode 100644
> index 0000000..f771039
> --- /dev/null
> +++ b/arch/arm/mach-mxs/include/mach/irqs.h
> @@ -0,0 +1,32 @@
> +/*
> + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
> + */
> +
> +/*
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __MACH_MXS_IRQS_H__
> +#define __MACH_MXS_IRQS_H__
> +
> +#define MXS_INTERNAL_IRQS 128
> +
> +#define MXS_GPIO_IRQ_START MXS_INTERNAL_IRQS
> +
> +/* the maximum for MXS-based */
> +#define MXS_GPIO_IRQS (32 * 5)
> +
> +/*
> + * The next 16 interrupts are for board specific purposes. Since
> + * the kernel can only run on one machine at a time, we can re-use
> + * these. If you need more, increase MXS_BOARD_IRQS, but keep it
> + * within sensible limits.
> + */
> +#define MXS_BOARD_IRQ_START (MXS_GPIO_IRQ_START + MXS_GPIO_IRQS)
> +#define MXS_BOARD_IRQS 16
> +
> +#define NR_IRQS (MXS_BOARD_IRQ_START + MXS_BOARD_IRQS)
> +
> +#endif /* __MACH_MXS_IRQS_H__ */
> diff --git a/arch/arm/mach-mxs/include/mach/memory.h b/arch/arm/mach-mxs/include/mach/memory.h
> new file mode 100644
> index 0000000..b5420a5
> --- /dev/null
> +++ b/arch/arm/mach-mxs/include/mach/memory.h
> @@ -0,0 +1,24 @@
> +/*
> + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> + */
> +
> +#ifndef __MACH_MXS_MEMORY_H__
> +#define __MACH_MXS_MEMORY_H__
> +
> +#define PHYS_OFFSET UL(0x40000000)
> +
> +#endif /* __MACH_MXS_MEMORY_H__ */
> diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h
> new file mode 100644
> index 0000000..2033ed4
> --- /dev/null
> +++ b/arch/arm/mach-mxs/include/mach/mx23.h
> @@ -0,0 +1,147 @@
> +/*
> + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> + */
> +
> +#ifndef __MACH_MX23_H__
> +#define __MACH_MX23_H__
> +
> +#ifndef __ASSEMBLER__
> +#include <linux/io.h>
> +#endif
You don't need this, do you?
#inclusion of hardware.h would be OK, then you could remove the
#includes of mx23.h and mx28.h in there.
(Believe me, this is better, mxc already made me headaches because of
that.)
> +/*
> + * OCRAM
> + */
> +#define MX23_OCRAM_BASE_ADDR 0x00000000
> +#define MX23_OCRAM_SIZE SZ_32K
> +
> +/*
> + * IO
> + */
> +#define MX23_IO_BASE_ADDR 0x80000000
> +#define MX23_IO_SIZE SZ_1M
> +
> +#define MX23_ICOLL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x000000)
> +#define MX23_APBH_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x004000)
> +#define MX23_BCH_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00a000)
> +#define MX23_GPMI_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00c000)
> +#define MX23_SSP1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x010000)
> +#define MX23_PINCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x018000)
> +#define MX23_DIGCTL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x01c000)
> +#define MX23_ETM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x020000)
> +#define MX23_APBX_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x024000)
> +#define MX23_DCP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x028000)
> +#define MX23_PXP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02a000)
> +#define MX23_OCOTP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02c000)
> +#define MX23_AXI_AHB0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02e000)
> +#define MX23_LCDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x030000)
> +#define MX23_SSP2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x034000)
> +#define MX23_TVENC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x038000)
> +#define MX23_CLKCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x040000)
> +#define MX23_SAIF0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x042000)
> +#define MX23_POWER_BASE_ADDR (MX23_IO_BASE_ADDR + 0x044000)
> +#define MX23_SAIF1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x046000)
> +#define MX23_AUDIOOUT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x048000)
> +#define MX23_AUDIOIN_BASE_ADDR (MX23_IO_BASE_ADDR + 0x04c000)
> +#define MX23_LRADC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x050000)
> +#define MX23_SPDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x054000)
> +#define MX23_I2C0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000)
> +#define MX23_RTC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x05c000)
> +#define MX23_PWM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x064000)
> +#define MX23_TIMROT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x068000)
> +#define MX23_AUART1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06c000)
> +#define MX23_AUART2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06e000)
> +#define MX23_DUART_BASE_ADDR (MX23_IO_BASE_ADDR + 0x070000)
> +#define MX23_USBPHY_BASE_ADDR (MX23_IO_BASE_ADDR + 0x07c000)
> +#define MX23_USBCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x080000)
> +#define MX23_DRAM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x0e0000)
> +
> +#define MX23_IO_P2V(x) MXS_IO_P2V(x)
> +#define MX23_IO_ADDRESS(x) IOMEM(MX23_IO_P2V(x))
> +
> +/*
> + * IRQ
> + */
> +#define MX23_INT_DUART 0
> +#define MX23_INT_COMMS_RX 1
> +#define MX23_INT_COMMS_TX 1
> +#define MX23_INT_SSP2_ERROR 2
> +#define MX23_INT_VDD5V 3
> +#define MX23_INT_HEADPHONE_SHORT 4
> +#define MX23_INT_DAC_DMA 5
> +#define MX23_INT_DAC_ERROR 6
> +#define MX23_INT_ADC_DMA 7
> +#define MX23_INT_ADC_ERROR 8
> +#define MX23_INT_SPDIF_DMA 9
> +#define MX23_INT_SAIF2_DMA 9
> +#define MX23_INT_SPDIF_ERROR 10
> +#define MX23_INT_SAIF1_IRQ 10
> +#define MX23_INT_SAIF2_IRQ 10
> +#define MX23_INT_USB_CTRL 11
> +#define MX23_INT_USB_WAKEUP 12
> +#define MX23_INT_GPMI_DMA 13
> +#define MX23_INT_SSP1_DMA 14
> +#define MX23_INT_SSP_ERROR 15
> +#define MX23_INT_GPIO0 16
> +#define MX23_INT_GPIO1 17
> +#define MX23_INT_GPIO2 18
> +#define MX23_INT_SAIF1_DMA 19
> +#define MX23_INT_SSP2_DMA 20
> +#define MX23_INT_ECC8_IRQ 21
> +#define MX23_INT_RTC_ALARM 22
> +#define MX23_INT_UARTAPP_TX_DMA 23
> +#define MX23_INT_UARTAPP_INTERNAL 24
> +#define MX23_INT_UARTAPP_RX_DMA 25
> +#define MX23_INT_I2C_DMA 26
> +#define MX23_INT_I2C_ERROR 27
> +#define MX23_INT_TIMER0 28
> +#define MX23_INT_TIMER1 29
> +#define MX23_INT_TIMER2 30
> +#define MX23_INT_TIMER3 31
> +#define MX23_INT_BATT_BRNOUT 32
> +#define MX23_INT_VDDD_BRNOUT 33
> +#define MX23_INT_VDDIO_BRNOUT 34
> +#define MX23_INT_VDD18_BRNOUT 35
> +#define MX23_INT_TOUCH_DETECT 36
> +#define MX23_INT_LRADC_CH0 37
> +#define MX23_INT_LRADC_CH1 38
> +#define MX23_INT_LRADC_CH2 39
> +#define MX23_INT_LRADC_CH3 40
> +#define MX23_INT_LRADC_CH4 41
> +#define MX23_INT_LRADC_CH5 42
> +#define MX23_INT_LRADC_CH6 43
> +#define MX23_INT_LRADC_CH7 44
> +#define MX23_INT_LCDIF_DMA 45
> +#define MX23_INT_LCDIF_ERROR 46
> +#define MX23_INT_DIGCTL_DEBUG_TRAP 47
> +#define MX23_INT_RTC_1MSEC 48
> +#define MX23_INT_DRI_DMA 49
> +#define MX23_INT_DRI_ATTENTION 50
> +#define MX23_INT_GPMI_ATTENTION 51
> +#define MX23_INT_IR 52
> +#define MX23_INT_DCP_VMI 53
> +#define MX23_INT_DCP 54
> +#define MX23_INT_BCH 56
> +#define MX23_INT_PXP 57
> +#define MX23_INT_UARTAPP2_TX_DMA 58
> +#define MX23_INT_UARTAPP2_INTERNAL 59
> +#define MX23_INT_UARTAPP2_RX_DMA 60
> +#define MX23_INT_VDAC_DETECT 61
> +#define MX23_INT_VDD5V_DROOP 64
> +#define MX23_INT_DCDC4P2_BO 65
> +
> +#endif /* __MACH_MX23_H__ */
> diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h
> new file mode 100644
> index 0000000..be1c2a4
> --- /dev/null
> +++ b/arch/arm/mach-mxs/include/mach/mx28.h
> @@ -0,0 +1,190 @@
> +/*
> + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> + */
> +
> +#ifndef __MACH_MX28_H__
> +#define __MACH_MX28_H__
> +
> +#ifndef __ASSEMBLER__
> +#include <linux/io.h>
> +#endif
ditto
> +
> +/*
> + * OCRAM
> + */
> +#define MX28_OCRAM_BASE_ADDR 0x00000000
> +#define MX28_OCRAM_SIZE SZ_128K
> +
> +/*
> + * IO
> + */
> +#define MX28_IO_BASE_ADDR 0x80000000
> +#define MX28_IO_SIZE SZ_1M
> +
> +#define MX28_ICOLL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x000000)
> +#define MX28_HSADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x002000)
> +#define MX28_APBH_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x004000)
> +#define MX28_PERFMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x006000)
> +#define MX28_BCH_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00a000)
> +#define MX28_GPMI_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00c000)
> +#define MX28_SSP0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x010000)
> +#define MX28_SSP1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x012000)
> +#define MX28_SSP2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x014000)
> +#define MX28_SSP3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x016000)
> +#define MX28_PINCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x018000)
> +#define MX28_DIGCTL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x01c000)
> +#define MX28_ETM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x022000)
> +#define MX28_APBX_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x024000)
> +#define MX28_DCP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x028000)
> +#define MX28_PXP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02a000)
> +#define MX28_OCOTP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02c000)
> +#define MX28_AXI_AHB0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02e000)
> +#define MX28_LCDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x030000)
> +#define MX28_CAN0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x032000)
> +#define MX28_CAN1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x034000)
> +#define MX28_SIMDBG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c000)
> +#define MX28_SIMGPMISEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c200)
> +#define MX28_SIMSSPSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c300)
> +#define MX28_SIMMEMSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c400)
> +#define MX28_GPIOMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c500)
> +#define MX28_SIMENET_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c700)
> +#define MX28_ARMJTAG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c800)
> +#define MX28_CLKCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x040000)
> +#define MX28_SAIF0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x042000)
> +#define MX28_POWER_BASE_ADDR (MX28_IO_BASE_ADDR + 0x044000)
> +#define MX28_SAIF1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x046000)
> +#define MX28_LRADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x050000)
> +#define MX28_SPDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x054000)
> +#define MX28_RTC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x056000)
> +#define MX28_I2C0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x058000)
> +#define MX28_I2C1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x05a000)
> +#define MX28_PWM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x064000)
> +#define MX28_TIMROT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x068000)
> +#define MX28_AUART0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06a000)
> +#define MX28_AUART1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06c000)
> +#define MX28_AUART2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06e000)
> +#define MX28_AUART3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x070000)
> +#define MX28_AUART4_BASE_ADDR (MX28_IO_BASE_ADDR + 0x072000)
> +#define MX28_DUART_BASE_ADDR (MX28_IO_BASE_ADDR + 0x074000)
> +#define MX28_USBPHY0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07C000)
> +#define MX28_USBPHY1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07e000)
> +#define MX28_USBCTRL0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x080000)
> +#define MX28_USBCTRL1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x090000)
> +#define MX28_DFLPT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0c0000)
> +#define MX28_DRAM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0e0000)
> +#define MX28_ENET_MAC0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f0000)
> +#define MX28_ENET_MAC1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f4000)
> +
> +#define MX28_IO_P2V(x) MXS_IO_P2V(x)
> +#define MX28_IO_ADDRESS(x) IOMEM(MX28_IO_P2V(x))
> +
> +/*
> + * IRQ
> + */
> +#define MX28_INT_BATT_BRNOUT 0
> +#define MX28_INT_VDDD_BRNOUT 1
> +#define MX28_INT_VDDIO_BRNOUT 2
> +#define MX28_INT_VDDA_BRNOUT 3
> +#define MX28_INT_VDD5V_DROOP 4
> +#define MX28_INT_DCDC4P2_BRNOUT 5
> +#define MX28_INT_VDD5V 6
> +#define MX28_INT_CAN0 8
> +#define MX28_INT_CAN1 9
> +#define MX28_INT_LRADC_TOUCH 10
> +#define MX28_INT_HSADC 13
> +#define MX28_INT_IRADC_THRESH0 14
> +#define MX28_INT_IRADC_THRESH1 15
> +#define MX28_INT_LRADC_CH0 16
> +#define MX28_INT_LRADC_CH1 17
> +#define MX28_INT_LRADC_CH2 18
> +#define MX28_INT_LRADC_CH3 19
> +#define MX28_INT_LRADC_CH4 20
> +#define MX28_INT_LRADC_CH5 21
> +#define MX28_INT_LRADC_CH6 22
> +#define MX28_INT_LRADC_CH7 23
> +#define MX28_INT_LRADC_BUTTON0 24
> +#define MX28_INT_LRADC_BUTTON1 25
> +#define MX28_INT_PERFMON 27
> +#define MX28_INT_RTC_1MSEC 28
> +#define MX28_INT_RTC_ALARM 29
> +#define MX28_INT_COMMS 31
> +#define MX28_INT_EMI_ERR 32
> +#define MX28_INT_LCDIF 38
> +#define MX28_INT_PXP 39
> +#define MX28_INT_BCH 41
> +#define MX28_INT_GPMI 42
> +#define MX28_INT_SPDIF_ERROR 45
> +#define MX28_INT_DUART 47
> +#define MX28_INT_TIMER0 48
> +#define MX28_INT_TIMER1 49
> +#define MX28_INT_TIMER2 50
> +#define MX28_INT_TIMER3 51
> +#define MX28_INT_DCP_VMI 52
> +#define MX28_INT_DCP 53
> +#define MX28_INT_DCP_SECURE 54
> +#define MX28_INT_SAIF1 58
> +#define MX28_INT_SAIF0 59
> +#define MX28_INT_SPDIF_DMA 66
> +#define MX28_INT_I2C0_DMA 68
> +#define MX28_INT_I2C1_DMA 69
> +#define MX28_INT_AUART0_RX_DMA 70
> +#define MX28_INT_AUART0_TX_DMA 71
> +#define MX28_INT_AUART1_RX_DMA 72
> +#define MX28_INT_AUART1_TX_DMA 73
> +#define MX28_INT_AUART2_RX_DMA 74
> +#define MX28_INT_AUART2_TX_DMA 75
> +#define MX28_INT_AUART3_RX_DMA 76
> +#define MX28_INT_AUART3_TX_DMA 77
> +#define MX28_INT_AUART4_RX_DMA 78
> +#define MX28_INT_AUART4_TX_DMA 79
> +#define MX28_INT_SAIF0_DMA 80
> +#define MX28_INT_SAIF1_DMA 81
> +#define MX28_INT_SSP0_DMA 82
> +#define MX28_INT_SSP1_DMA 83
> +#define MX28_INT_SSP2_DMA 84
> +#define MX28_INT_SSP3_DMA 85
> +#define MX28_INT_LCDIF_DMA 86
> +#define MX28_INT_HSADC_DMA 87
> +#define MX28_INT_GPMI_DMA 88
> +#define MX28_INT_DIGCTL_DEBUG_TRAP 89
> +#define MX28_INT_USB1 92
> +#define MX28_INT_USB0 93
> +#define MX28_INT_USB1_WAKEUP 94
> +#define MX28_INT_USB0_WAKEUP 95
> +#define MX28_INT_SSP0 96
> +#define MX28_INT_SSP1 97
> +#define MX28_INT_SSP2 98
> +#define MX28_INT_SSP3 99
> +#define MX28_INT_ENET_SWI 100
> +#define MX28_INT_ENET_MAC0 101
> +#define MX28_INT_ENET_MAC1 102
> +#define MX28_INT_ENET_MAC0_1588 103
> +#define MX28_INT_ENET_MAC1_1588 104
> +#define MX28_INT_I2C1_ERROR 110
> +#define MX28_INT_I2C0_ERROR 111
> +#define MX28_INT_AUART0 112
> +#define MX28_INT_AUART1 113
> +#define MX28_INT_AUART2 114
> +#define MX28_INT_AUART3 115
> +#define MX28_INT_AUART4 116
> +#define MX28_INT_GPIO4 123
> +#define MX28_INT_GPIO3 124
> +#define MX28_INT_GPIO2 125
> +#define MX28_INT_GPIO1 126
> +#define MX28_INT_GPIO0 127
> +
> +#endif /* __MACH_MX28_H__ */
> diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
> new file mode 100644
> index 0000000..13e06ae
> --- /dev/null
> +++ b/arch/arm/mach-mxs/include/mach/mxs.h
> @@ -0,0 +1,34 @@
> +/*
> + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> + */
> +
> +#ifndef __MACH_MXS_H__
> +#define __MACH_MXS_H__
> +
> +#include <asm/mach-types.h>
> +
> +#define MXS_SET_ADDR 0x4
> +#define MXS_CLR_ADDR 0x8
> +#define MXS_TOG_ADDR 0xc
> +
> +/*
> + * MXS CPU types
> + */
> +# define cpu_is_mx23() (machine_is_mx23evk())
> +# define cpu_is_mx28() (machine_is_mx28evk())
> +
> +#endif /* __MACH_MXS_H__ */
> --
> 1.7.1
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
More information about the linux-arm-kernel
mailing list