[PATCH 1/7] OMAP3: remove unused code from the ASM sleep code
jean.pihet at newoldbits.com
jean.pihet at newoldbits.com
Sat Dec 18 10:44:41 EST 2010
From: Jean Pihet <j-pihet at ti.com>
Remove unused code:
- macros,
- variables,
- unused semaphore locking API. This API shall be added back
when needed,
- infinite loops for debug.
Tested on N900 and Beagleboard with full RET and OFF modes,
using cpuidle and suspend.
Signed-off-by: Jean Pihet <j-pihet at ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
Reviewed-by: Nishanth Menon <nm at ti.com>
Tested-by: Nishanth Menon<nm at ti.com>
---
arch/arm/mach-omap2/pm.h | 1 -
arch/arm/mach-omap2/sleep34xx.S | 58 ++++-----------------------------------
2 files changed, 6 insertions(+), 53 deletions(-)
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index aff39d0..e458b2a 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -80,7 +80,6 @@ extern void save_secure_ram_context(u32 *addr);
extern void omap3_save_scratchpad_contents(void);
extern unsigned int omap24xx_idle_loop_suspend_sz;
-extern unsigned int omap34xx_suspend_sz;
extern unsigned int save_secure_ram_context_sz;
extern unsigned int omap24xx_cpu_suspend_sz;
extern unsigned int omap34xx_cpu_suspend_sz;
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index d2eda01..2191576 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -35,11 +35,7 @@
#define SDRC_SCRATCHPAD_SEM_V 0xfa00291c
-#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \
- OMAP3430_PM_PREPWSTST)
#define PM_PREPWSTST_CORE_P 0x48306AE8
-#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \
- OMAP3430_PM_PREPWSTST)
#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL
#define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
#define CM_IDLEST_CKGEN_V OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
@@ -62,36 +58,10 @@
#define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
- .text
-/* Function to acquire the semaphore in scratchpad */
-ENTRY(lock_scratchpad_sem)
- stmfd sp!, {lr} @ save registers on stack
-wait_sem:
- mov r0,#1
- ldr r1, sdrc_scratchpad_sem
-wait_loop:
- ldr r2, [r1] @ load the lock value
- cmp r2, r0 @ is the lock free ?
- beq wait_loop @ not free...
- swp r2, r0, [r1] @ semaphore free so lock it and proceed
- cmp r2, r0 @ did we succeed ?
- beq wait_sem @ no - try again
- ldmfd sp!, {pc} @ restore regs and return
-sdrc_scratchpad_sem:
- .word SDRC_SCRATCHPAD_SEM_V
-ENTRY(lock_scratchpad_sem_sz)
- .word . - lock_scratchpad_sem
-
- .text
-/* Function to release the scratchpad semaphore */
-ENTRY(unlock_scratchpad_sem)
- stmfd sp!, {lr} @ save registers on stack
- ldr r3, sdrc_scratchpad_sem
- mov r2,#0
- str r2,[r3]
- ldmfd sp!, {pc} @ restore regs and return
-ENTRY(unlock_scratchpad_sem_sz)
- .word . - unlock_scratchpad_sem
+
+/*
+ * API functions
+ */
.text
/* Function call to get the restore pointer for resume from OFF */
@@ -178,8 +148,7 @@ ENTRY(es3_sdrc_fix_sz)
/* Function to call rom code to save secure ram context */
ENTRY(save_secure_ram_context)
stmfd sp!, {r1-r12, lr} @ save registers on stack
-save_secure_ram_debug:
- /* b save_secure_ram_debug */ @ enable to debug save code
+
adr r3, api_params @ r3 points to parameters
str r0, [r3,#0x4] @ r0 has sdram address
ldr r12, high_mask
@@ -219,8 +188,7 @@ ENTRY(save_secure_ram_context_sz)
*/
ENTRY(omap34xx_cpu_suspend)
stmfd sp!, {r0-r12, lr} @ save registers on stack
-loop:
- /*b loop*/ @Enable to debug by stepping through code
+
/* r0 contains restore pointer in sdram */
/* r1 contains information about saving context */
ldr r4, sdrc_power @ read the SDRC_POWER register
@@ -252,7 +220,6 @@ loop:
ldmfd sp!, {r0-r12, pc} @ restore regs and return
restore_es3:
- /*b restore_es3*/ @ Enable to debug restore code
ldr r5, pm_prepwstst_core_p
ldr r4, [r5]
and r4, r4, #0x3
@@ -272,7 +239,6 @@ copy_to_sram:
b restore
restore_3630:
- /*b restore_es3630*/ @ Enable to debug restore code
ldr r1, pm_prepwstst_core_p
ldr r2, [r1]
and r2, r2, #0x3
@@ -284,7 +250,6 @@ restore_3630:
str r2, [r1]
/* Fall thru for the remaining logic */
restore:
- /* b restore*/ @ Enable to debug restore code
/* Check what was the reason for mpu reset and store the reason in r9*/
/* 1 - Only L1 and logic lost */
/* 2 - Only L2 lost - In this case, we wont be here */
@@ -493,7 +458,6 @@ usettbr0:
ldmfd sp!, {r0-r12, pc} @ restore regs and return
save_context_wfi:
- /*b save_context_wfi*/ @ enable to debug save code
mov r8, r0 /* Store SDRAM address in r8 */
mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register
mov r4, #0x1 @ Number of parameters for restore call
@@ -672,12 +636,8 @@ sdrc_dlla_status:
.word SDRC_DLLA_STATUS_V
sdrc_dlla_ctrl:
.word SDRC_DLLA_CTRL_V
-pm_prepwstst_core:
- .word PM_PREPWSTST_CORE_V
pm_prepwstst_core_p:
.word PM_PREPWSTST_CORE_P
-pm_prepwstst_mpu:
- .word PM_PREPWSTST_MPU_V
pm_pwstctrl_mpu:
.word PM_PWSTCTRL_MPU_P
scratchpad_base:
@@ -686,12 +646,6 @@ sram_base:
.word SRAM_BASE_P + 0x8000
sdrc_power:
.word SDRC_POWER_V
-clk_stabilize_delay:
- .word 0x000001FF
-assoc_mask:
- .word 0x3ff
-numset_mask:
- .word 0x7fff
ttbrbit_mask:
.word 0xFFFFC000
table_index_mask:
--
1.7.2.3
More information about the linux-arm-kernel
mailing list