September 2010 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Sep 1 00:08:01 EDT 2010
Ending: Thu Sep 30 23:27:21 EDT 2010
Messages: 2863

• [PATCH 9/9] ARM: Add SWP/SWPB emulation for ARMv7 processors (v5)   Olof Johansson
• [PATCH 28/74] Incrementing the ecc_pos array to contain 128 char   Vipin Kumar
• [PATCH 21/74] ST SPEAr : Added keyboard support   rajeev
• [PATCH 21/74] ST SPEAr : Added keyboard support   rajeev
• [PATCH 03/24] arm: mm: add proc info for ScorpionMP   Shilimkar, Santosh
• [PATCH] serial: samsung: fix device name   Darius Augulis
• [PATCH 0/2] s3c: mach-real6410 missing fixes   Darius Augulis
• [PATCH 21/74] ST SPEAr : Added keyboard support   Dmitry Torokhov
• rmk "outage" until September   Russell King - ARM Linux
• [PATCH 21/74] ST SPEAr : Added keyboard support   viresh kumar
• ARM: LPC32XX: Various minor fixes and updates   Russell King - ARM Linux
• [PATCH 00/13] ARM: S5P64X0: Add new S5P6450 Support   Kukjin Kim
• [PATCH 01/13] ARM: S5P: Moves initial map for merging S5P64X0   Kukjin Kim
• [PATCH 02/13] ARM: S5P64X0: Update Kconfig and Makefile   Kukjin Kim
• [PATCH 03/13] ARM: S5P64X0: Add S5P64X0(S5P6440 and S5P6450) initialization support   Kukjin Kim
• [PATCH 04/13] ARM: S5P64X0: Update Clock for S5P6440 and S5P6450   Kukjin Kim
• [PATCH 05/13] ARM: S5P64X0: Update IRQ support   Kukjin Kim
• [PATCH 06/13] ARM: S5P64X0: Update Timer support   Kukjin Kim
• [PATCH 07/13] ARM: S5P64X0: Update Audio support   Kukjin Kim
• [PATCH 08/13] ARM: S5P64X0: Move DMA support for S5P64X0   Kukjin Kim
• [PATCH 09/13] ARM: S5P64X0: Add S5P6450 I2C support   Kukjin Kim
• [PATCH 10/13] ARM: S5P64X0: Move GPIO support files for merge S5P64X0   Kukjin Kim
• [PATCH 11/13] ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board file   Kukjin Kim
• [PATCH 12/13] ARM: S5P64X0: Add UART serial support for S5P6450   Kukjin Kim
• [PATCH 13/13] ARM: s5p64x0_defconfig: Update for support S5P6440 and S5P6450   Kukjin Kim
• ptrace(PTRACE_PEEKUSER, ..., PT_TEXT_ADDR, ...)   Russell King - ARM Linux
• [PATCH 08/13] PXA: Colibri: Toradex Colibri PXA270 CF support   Russell King - ARM Linux
• PCI master abort with USB3.0 card   Pratyush Anand
• [PATCH 0/3] Allow late mdesc detection, v4   Russell King - ARM Linux
• [PATCH 2/2] set packet size limit for the mv643xx csum offloading   saeed bishara
• Request for holding Ryan's patch set for SPEAr   Russell King - ARM Linux
• [PATCH 2/2] set packet size limit for the mv643xx csum offloading   Lennert Buytenhek
• PCI master abort with USB3.0 card   Pratyush Anand
• AT91 UDC softirq problem   Russell King - ARM Linux
• ptrace(PTRACE_PEEKUSER, ..., PT_TEXT_ADDR, ...)   Simon Richter
• [PATCH v3] ux500: add ab8500-regulators machine specific data   Sundar Iyer
• [PATCH] arm: fix pci_set_consistent_dma_mask for dmabounce devices   Russell King - ARM Linux
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Russell King - ARM Linux
• [PATCH 2/7] wire up sys_time_change_notify() on ARM   Russell King - ARM Linux
• [PATCH v2] MAX8952 PMIC Driver Initial Release   Mark Brown
• [PATCH] ARM: Mark CPU_32v6K as depended on CPU_V7   Russell King - ARM Linux
• [PATCH 01/13] ARM: S5P: Moves initial map for merging S5P64X0   Kyungmin Park
• [PATCH v2] MAX8952 PMIC Driver Initial Release   Kukjin Kim
• A serial patchs that support FSL's eSDHC   Richard Zhu
• [PATCH 1/9] sdhci-1: add host's own set_power func to support the controller that used it's own power mechanism   Richard Zhu
• [PATCH 2/9] sdhci-2: add host's own get_ro func to support the controller that used it's own WP mechanism   Richard Zhu
• [PATCH 02/13] ARM: S5P64X0: Update Kconfig and Makefile   Kyungmin Park
• [PATCH 3/9] sdhci-3:add the NONSTANDARD_HOST_CTL quirk to support FSl eSDHC   Richard Zhu
• [PATCH 4/9] sdhci-4:add make_blksz api to support FSl eSDHC   Richard Zhu
• [PATCH 5/9] sdhci-5:add the 32BIT_CMD_TRANS_COMBINATION quirk to support FSl eSDHC   Richard Zhu
• [PATCH 6/9] esdhc-2 mxc: Modify the MSL codes when upstreaming fsl esdhc driver   Richard Zhu
• [PATCH v2] MAX8952 PMIC Driver Initial Release   Mark Brown
• [PATCH 7/9] esdhc-3 mx51: Modify the MSL codes when upstreaming fsl esdhc driver   Richard Zhu
• [PATCH 8/9] esdhc-4 esdhc: fsl esdhc driver based on platform sdhci api   Richard Zhu
• [PATCH 9/9] esdhc-5 mx51: enable fsl esdhc driver   Richard Zhu
• [PATCH] oprofile, x86: fix init_sysfs error handling   Ingo Molnar
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Uwe Kleine-König
• [PATCH 11/13] ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board file   Kyungmin Park
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Russell King - ARM Linux
• [PATCH 02/19] ARM: sa1111: move __sa1111_probe() to .devinit.text   Uwe Kleine-König
• [PATCH v2] MAX8952 PMIC Driver Initial Release   Kukjin Kim
• [PATCH v2] MAX8952 PMIC Driver Initial Release   Kyungmin Park
• A serial patchs that support FSL's eSDHC   Wolfram Sang
• [PATCH v2] MAX8952 PMIC Driver Initial Release   Kukjin Kim
• [PATCH v2] MAX8952 PMIC Driver Initial Release   Kyungmin Park
• [PATCH 28/74] Incrementing the ecc_pos array to contain 128 char   Artem Bityutskiy
• [PATCH 28/74] Incrementing the ecc_pos array to contain 128 char   Vipin Kumar
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] MAX8952 PMIC Driver Initial Release   Mark Brown
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Jean-Christophe PLAGNIOL-VILLARD
• mmc over SPI on DM6467 based board. card not detected.   Martin Guy
• [PATCH 00/13] ARM: S5P64X0: Add new S5P6450 Support   Ben Dooks
• [PATCH] ARM: perf: fix event validation   Will Deacon
• [PATCH 08/13] PXA: Colibri: Toradex Colibri PXA270 CF support   Marek Vasut
• [PATCH] oprofile, x86: fix init_sysfs() function stub   Robert Richter
• [PATCH] oprofile, x86: fix init_sysfs() function stub   Robert Richter
• [PATCH] ARM: perf: fix event validation   Jamie Iles
• [PATCH] oprofile, x86: fix init_sysfs error handling   Robert Richter
• [PATCH] ARM: Implement cpu_v7_reset.   Linus Walleij
• [PATCH] ARM: ux500 specific L2 cache code   Linus Walleij
• invalid address returned by usb_alloc_coherent on dockstar   MacLaren, James M
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Uwe Kleine-König
• [PATCH] amba_clcd: Check min clock limits based on selected mode   wellsk40 at gmail.com
• ARM926EJ-S TLB lockdown   Johannes Stezenbach
• PrimeCell generic DMA v10   Linus Walleij
• [PATCH 1/6] ARM: add PrimeCell generic DMA to PL022 v10   Linus Walleij
• [PATCH 2/6] ARM: add PrimeCell generic DMA to PL011 v10   Linus Walleij
• [PATCH 3/6] ARM: add PrimeCell generic DMA to MMCI/PL180 v10   Linus Walleij
• [PATCH 4/6] ARM: config U300 PL180 PL011 PL022 for DMA v10   Linus Walleij
• [PATCH 5/6] ARM: config Ux500 PL011 PL022 PL180 for DMA v10   Linus Walleij
• [PATCH 6/6] ARM: config RealViews PL011 PL022 for DMA v10   Linus Walleij
• [PATCH 6/6] ARM: config RealViews PL011 PL022 for DMA v10   Linus Walleij
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Uwe Kleine-König
• question about arch/arm/mach-h720x/include/mach/irqs.h   Julia Lawall
• question about arch/arm/mach-iop13xx/include/mach/pci.h   Julia Lawall
• [PATCH] ep93xx: move clock initialization earlier   Mika Westerberg
• [PATCH 5/9] sdhci-5:add the 32BIT_CMD_TRANS_COMBINATION quirk to support FSl eSDHC   Michał Mirosław
• [PATCH v3] ux500: add ab8500-regulators machine specific data   Mark Brown
• [PATCH 1/2] msm: Install the Google-Android gpio driver.   H Hartley Sweeten
• ARM926EJ-S TLB lockdown   Linus Walleij
• [RFC/PATCH 3/6] mmc: add general runtime PM support   Ohad Ben-Cohen
• [PATCH] ep93xx: move clock initialization earlier   Ryan Mallon
• [PATCH 1/2] msm: Install the Google-Android gpio driver.   Daniel Walker
• [PATCH] ARM: Implement cpu_v7_reset.   Stephen Boyd
• [PATCH 28/74] Incrementing the ecc_pos array to contain 128 char   Ryan Mallon
• [PATCH v5 0/7] native wl1271 support on ZOOM   Ohad Ben-Cohen
• [PATCH v5 1/7] wireless: wl1271: make wl12xx.h common to both spi and sdio   Ohad Ben-Cohen
• [PATCH v5 2/7] wireless: wl1271: support return value for the set power func   Ohad Ben-Cohen
• [PATCH v5 3/7] wireless: wl12xx: add platform data passing support   Ohad Ben-Cohen
• [PATCH v5 4/7] wireless: wl1271: take irq info from private board data   Ohad Ben-Cohen
• [PATCH v5 5/7] wireless: wl1271: make ref_clock configurable by board   Ohad Ben-Cohen
• [PATCH v5 6/7] omap: zoom: add fixed regulator device for wlan   Ohad Ben-Cohen
• [PATCH v5 7/7] omap: zoom: add mmc3/wl1271 device support   Ohad Ben-Cohen
• [PATCH 1/2] msm: Install the Google-Android gpio driver.   Ryan Mallon
• [PATCH 28/74] Incrementing the ecc_pos array to contain 128 char   Kevin Cernekee
• [PATCH] ARM: Add SMP and UP macros for inline assembly   Tony Lindgren
• [GIT PULL] Tegra fixes for 2.6.36   Erik Gilling
• [PATCH 0/9] [ARM] tegra: Additional core support for Tegra2 SOCs   Erik Gilling
• [PATCH v4] spi: add spi_tegra driver   Erik Gilling
• [PATCH v4] spi: add spi_tegra driver   Erik Gilling
• [PATCH 28/74] Incrementing the ecc_pos array to contain 128 char   Ryan Mallon
• [PATCH 27/74] ST SPEAr : NAND interface driver for spear platforms   Linus Walleij
• [PATCH 44/74] ST SPEAr : FSMC (Flexible Static Memory Controller) NOR interface driver   Linus Walleij
• [PATCH 28/74] Incrementing the ecc_pos array to contain 128 char   Artem Bityutskiy
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Russell King - ARM Linux
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Russell King - ARM Linux
• [PATCH] ARM: pxa3xx: fix build error when CONFIG_MTD_PARTITIONS is not defined   Artem Bityutskiy
• [PATCH] ARM: Implement cpu_v7_reset.   Russell King - ARM Linux
• [PATCH 28/74] Incrementing the ecc_pos array to contain 128 char   Artem Bityutskiy
• [PATCH] msm: Featurize gpiomux.   Gregory Bean
• [PATCH] msm: Featurize gpiomux.   Daniel Walker
• [PATCH 28/74] Incrementing the ecc_pos array to contain 128 char   Ryan Mallon
• [PATCH 1/2 v2] msm: Install the Google-Android gpio driver.   Gregory Bean
• [PATCH 2/2 v2] msm: gpio: Add gpiomux calls to request and free.   Gregory Bean
• [PATCH 28/74] Incrementing the ecc_pos array to contain 128 char   Ryan Mallon
• [PATCH 1/2 v2] msm: Install the Google-Android gpio driver.   Daniel Walker
• [PATCH 0/2] s3c: mach-real6410 missing fixes   Kukjin Kim
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Tony Lindgren
• [PATCH] msm: Featurize gpiomux.   Gregory Bean
• [PATCH 08/13] ARM: S5P64X0: Move DMA support for S5P64X0   Jassi Brar
• [PATCH 12/13] ARM: S5P64X0: Add UART serial support for S5P6450   Kyungmin Park
• [PATCH 07/13] ARM: S5P64X0: Update Audio support   Jassi Brar
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Paul Mundt
• [PATCH] arm: fix pci_set_consistent_dma_mask for dmabounce devices   FUJITA Tomonori
• [PATCH] [ARM] twd: Allow twd rescaling to match cpu frequency   Colin Cross
• [PATCH 4/6] ARM: Do not call test_for_ipi or test_for_ltrirq on UP systems   Tony Lindgren
• [PATCH] ARM: Implement cpu_v7_reset.   Uwe Kleine-König
• imx.c : dte mode and modem control   Olivier Barthel
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Uwe Kleine-König
• [PATCH] arm: fix pci_set_consistent_dma_mask for dmabounce devices   Richard Cochran
• [PATCH] ARM: omap1/nokia770: mark some functions __init   Uwe Kleine-König
• [PATCH 28/74] Incrementing the ecc_pos array to contain 128 char   Brian Norris
• [PATCH 1/3] plat-nomadik: MTU timer   Jonas Aaberg
• [PATCH 2/3] plat-nomadik: Added suspend/resume support for MTU timer.   Jonas Aaberg
• [PATCH 3/3] mach-ux500: Added nomadik mtu timer suspend/resume hooks.   Jonas Aaberg
• [PATCH 07/13] ARM: S5P64X0: Update Audio support   Kukjin Kim
• [PATCH 08/13] ARM: S5P64X0: Move DMA support for S5P64X0   Kukjin Kim
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Jason Wang
• [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU   Jason Wang
• [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions   Jason Wang
• [PATCH 3/6] mx5: add support to dynamically register spi_imx devices (imx51 3ds)   Jason Wang
• [PATCH 4/6] mx5/iomux: add iomux definitions for eCSPI2 on the imx51_3ds board   Jason Wang
• [PATCH 5/6] mx51_3ds: add eCSPI2 support on the imx51_3ds board   Jason Wang
• [PATCH 6/6] mx51_3ds: add SPI NOR flash in the board init stage   Jason Wang
• [PATCH 11/13] ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board file   Kukjin Kim
• [PATCH 1/5] ARM: omap/fb: move omap_init_fb to .init.text   Uwe Kleine-König
• [PATCH 2/5] ARM: omap/fb: move omapfb_reserve_sram to .init.text   Uwe Kleine-König
• [PATCH 3/5] ARM: omap/fb: move get_fbmem_region() to .init.text   Uwe Kleine-König
• [PATCH 4/5] ARM: omap: move omap_get_config et al. to .init.text   Uwe Kleine-König
• [PATCH 5/5] wip: ARM: omap: move omap_board_config_kernel to .init.data   Uwe Kleine-König
• [PATCH 27/74] ST SPEAr : NAND interface driver for spear platforms   Armando Visconti
• [PATCH 02/13] ARM: S5P64X0: Update Kconfig and Makefile   Kukjin Kim
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Uwe Kleine-König
• [PATCH] ARM: perf: fix event validation   Will Deacon
• [PATCH] ARM: Implement cpu_v7_reset.   Mika Westerberg
• [PATCH] ARM: Implement cpu_v7_reset.   Russell King - ARM Linux
• [PATCH] ARM: Implement cpu_v7_reset.   Russell King - ARM Linux
• [RFC] [PATCH] arm & sh: factorised duplicated clkdev.c   Russell King - ARM Linux
• [PATCH 0/9] [ARM] tegra: Additional core support for Tegra2 SOCs   Russell King - ARM Linux
• [PATCH 08/74] ST SPEAr1300: Adding default config file   Russell King - ARM Linux
• [PATCH 27/74] ST SPEAr : NAND interface driver for spear platforms   Armando Visconti
• [PATCH] ARM: Implement cpu_v7_reset.   Mika Westerberg
• [PATCH/RFCv4 0/6] The Contiguous Memory Allocator framework   KAMEZAWA Hiroyuki
• [PATCH 04/74] ST SPEAr13XX: Adding machine specific header files   Russell King - ARM Linux
• [PATCH 05/74] ST SPEAr13XX: Adding machine specific src files   Russell King - ARM Linux
• [PATCH 10/74] ST SPEAr: Adding support for CLCD on SPEAr3xx/6xx   Russell King - ARM Linux
• [PATCH 14/74] ST SPEAr: Adding PLGPIO driver for spear platform   Russell King - ARM Linux
• [PATCH 32/74] ST SPEAr: Adding clk_set_rate support   Russell King - ARM Linux
• [PATCH 28/74] Incrementing the ecc_pos array to contain 128 char   Artem Bityutskiy
• [PATCH 31/74] ST SPEAr: Adding support for SSP PL022   Russell King - ARM Linux
• [PATCH 35/74] ST SPEAr: Enabling clocks before amba device registeration   Russell King - ARM Linux
• [PATCH 38/74] ST SPEAr3xx: Rearranging declarations in clock.c file   Russell King - ARM Linux
• A serial patchs that support FSL's eSDHC   Zhu Richard-R65037
• [PATCH 40/74] ST SPEAr 13xx : Adding support for SPEAr1310   Russell King - ARM Linux
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Jason Wang
• [PATCH 0/9] [ARM] tegra: Additional core support for Tegra2 SOCs   Erik Gilling
• [PATCH 00/13] ARM: S5P64X0: Add new S5P6450 Support   Kukjin Kim
• [PATCH 45/74] SPEAr : SEV Send event to secondary CPUs   Russell King - ARM Linux
• [PATCH 48/74] GIC: Added dummy handlers for Power Management Suspend Resume   Russell King - ARM Linux
• [PATCH 49/74] SPEAr CPU freq: Adding support for CPU Freq framework   Russell King - ARM Linux
• [PATCH 1/2 v2] msm: Install the Google-Android gpio driver.   Ben Dooks
• [PATCH 16/19] ARM: nomadik: register nmk_gpio_driver using platform_driver_probe   Linus Walleij
• [PATCH] ARM: Implement cpu_v7_reset.   Russell King - ARM Linux
• [PATCH 45/74] SPEAr : SEV Send event to secondary CPUs   Will Deacon
• [PATCH] sdhci-s3c: support non-standard clock setting for c210   Kukjin Kim
• [PATCH 16/19] ARM: nomadik: register nmk_gpio_driver using platform_driver_probe   Uwe Kleine-König
• [PATCH 4/5] DMA: Add functions to preallocate DMA memory dor devices   Russell King - ARM Linux
• [PATCH 1/3] h1940: use gpiolib for latch access   Russell King - ARM Linux
• [PATCH 1/4] ARM: hw-breakpoint: add mechanism for hooking into prefetch aborts   Russell King - ARM Linux
• [PATCH] sdhci-s3c: support non-standard clock setting for c210   Kukjin Kim
• [PATCH] sdhci-s3c: support non-standard clock setting for c210   Kyungmin Park
• [PATCH] sdhci-s3c: support non-standard clock setting for c210   Jaehoon Chung
• [PATCH 45/74] SPEAr : SEV Send event to secondary CPUs   Shilimkar, Santosh
• [PATCH 09/24] msm: MSM8X60 RUMI3 board support   Russell King - ARM Linux
• [PATCH 10/24] msm: irq: rename existing entry-macro to entry-macro-vic   Russell King - ARM Linux
• [PATCH 14/24] msm: add hotplug stub functions   Russell King - ARM Linux
• [PATCH 20/24] msm: MSM8X60 simulator board support   Russell King - ARM Linux
• [PATCH 27/74] ST SPEAr : NAND interface driver for spear platforms   Linus Walleij
• [PATCH 3/3 v2] dmaengine: Add Freescale i.MX SDMA support   Russell King - ARM Linux
• [PATCH] ep93xx: move clock initialization earlier   Russell King - ARM Linux
• defconfig reduction script   Linus Walleij
• [PATCH] ARM: Implement cpu_v7_reset.   Mika Westerberg
• defconfig reduction script   Uwe Kleine-König
• [PATCH] ARM: Implement cpu_v7_reset.   Russell King - ARM Linux
• [PATCH 27/74] ST SPEAr : NAND interface driver for spear platforms   Armando Visconti
• [RFC] [PATCH v2] arm & sh: factorised duplicated clkdev.c   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] [PATCH v2] arm & sh: factorised duplicated clkdev.c   Russell King - ARM Linux
• [PATCH 45/74] SPEAr : SEV Send event to secondary CPUs   Russell King - ARM Linux
• [RFC] [PATCH v2] arm & sh: factorised duplicated clkdev.c   Uwe Kleine-König
• [PATCH] ARM: Implement cpu_v7_reset.   Per Fransson
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Russell King - ARM Linux
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Russell King - ARM Linux
• [PATCH V3] arm & sh: factorised duplicated clkdev.c   Jean-Christophe PLAGNIOL-VILLARD
• memblock_is_region_reserved() issue   Russell King - ARM Linux
• [RFC] [PATCH v2] arm & sh: factorised duplicated clkdev.c   Russell King - ARM Linux
• [PATCH] ARM: Implement cpu_v7_reset.   Mika Westerberg
• [PATCH] ARM: nomadik: move nmk_gpio_probe to .devinit.text   Uwe Kleine-König
• [RFC] [PATCH v2] arm & sh: factorised duplicated clkdev.c   Uwe Kleine-König
• [PATCH 3/3] dmaengine: Add Freescale i.MX SDMA support   Russell King - ARM Linux
• [PATCH 1/5] U6/U6715 ARM architecture files   Russell King - ARM Linux
• mmc over SPI on DM6467 based board. card not detected.   Jassi Brar
• Colibri PXA320 Power management question   Mark Brown
• [PATCH v4] spi: add spi_tegra driver   Grant Likely
• ARM926EJ-S TLB lockdown   Johannes Stezenbach
• [PATCH v2] ep93xx: move clock initialization earlier   Mika Westerberg
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Uwe Kleine-König
• Colibri PXA320 Power management question   Mike Rapoport
• [PATCH 1/6] ARM: mx51: clean up mx51 header   Uwe Kleine-König
• [PATCH 2/6] ARM: mx51: fix naming of spi related defines   Uwe Kleine-König
• [PATCH 3/6] ARM: imx: change the way spi-imx devices are registered   Uwe Kleine-König
• [PATCH 4/6] ARM: mx51: Add spi clock and spi_imx device registration   Uwe Kleine-König
• [PATCH 5/6] spi-imx: Add i.MX51 support   Uwe Kleine-König
• [PATCH 6/6] ARM: mx5/mx51_babbage: Add spi support   Uwe Kleine-König
• [PATCH 16/19] ARM: nomadik: register nmk_gpio_driver using platform_driver_probe   Russell King - ARM Linux
• [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU   Uwe Kleine-König
• [PATCH] ARM: nomadik: move nmk_gpio_probe to .devinit.text   Rabin Vincent
• [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions   Uwe Kleine-König
• [PATCH 3/6] mx5: add support to dynamically register spi_imx devices (imx51 3ds)   Uwe Kleine-König
• [PATCH 5/6] mx51_3ds: add eCSPI2 support on the imx51_3ds board   Uwe Kleine-König
• [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU   Lothar Waßmann
• (Patch #6347) ARM: nomadik: move nmk_gpio_probe to .devinit.text   Uwe Kleine-König
• [PATCH 2/6] ARM: Use SMP and UP macros for cacheflush   Tony Lindgren
• Colibri PXA320 Power management question   Mark Brown
• [PATCH 72/74] SPEAr13xx: Replace defconfigs with single unfied defconfig   Russell King - ARM Linux
• Colibri PXA320 Power management question   Mike Rapoport
• [PATCH 45/74] SPEAr : SEV Send event to secondary CPUs   Russell King - ARM Linux
• [PATCH 2/3] plat-nomadik: Added suspend/resume support for MTU timer.   Russell King - ARM Linux
• [PATCH 3/3] mach-ux500: Added nomadik mtu timer suspend/resume hooks.   Russell King - ARM Linux
• [PATCH] amba_clcd: Check min clock limits based on selected mode   Russell King - ARM Linux
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Tony Lindgren
• [PATCH 1/6] ARM: Add inline function smp_on_up() for early init testing   Tony Lindgren
• [PATCH 2/6] ARM: Use SMP and UP macros for cacheflush   Tony Lindgren
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Tony Lindgren
• [PATCH 4/6] ARM: Do not call test_for_ipi or test_for_ltrirq on UP systems   Tony Lindgren
• Samsung Linux project management status page...?   Tim Bird
• [PATCH 5/6] ARM: Don't set TLB ops broadcasting on UP ARMv7   Tony Lindgren
• [PATCH 6/6] omap: Fix SMP on UP interrupt handling for multi-omap   Tony Lindgren
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Russell King - ARM Linux
• [PATCH 4/4] omap: Fix SMP on UP interrupt handling for multi-omap   Tony Lindgren
• [PATCH 07/74] ST SPEAr13XX: Added compilation support in arch/arm/   Jean-Christophe PLAGNIOL-VILLARD
• invalid address returned by usb_alloc_coherent on dockstar   Russell King - ARM Linux
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Tony Lindgren
• [PATCH 14/24] msm: add hotplug stub functions   Daniel Walker
• [PATCH 5/6] ARM: Don't set TLB ops broadcasting on UP ARMv7   Russell King - ARM Linux
• [PATCH 9/9] ARM: Add SWP/SWPB emulation for ARMv7 processors (v5)   Leif Lindholm
• [PATCH 1/6] ARM: Add inline function smp_on_up() for early init testing   Russell King - ARM Linux
• [PATCH v2] davinci: Initial support for MityDSP-L138/MityARM-1808   Kevin Hilman
• [PATCH 14/24] msm: add hotplug stub functions   Russell King - ARM Linux
• [PATCH 0/6] ARM: Add inline function smp_on_up() for early init testing   Tony Lindgren
• [PATCH 9/9] ARM: Add SWP/SWPB emulation for ARMv7 processors (v5)   Olof Johansson
• [PATCH 5/6] ARM: Don't set TLB ops broadcasting on UP ARMv7   Tony Lindgren
• [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU   Baruch Siach
• [PATCH 1/6] ARM: Add inline function smp_on_up() for early init testing   Tony Lindgren
• [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU   Uwe Kleine-König
• [PATCH v3] davinci: Initial support for MityDSP-L138/MityARM-1808   Michael Williamson
• [PATCH 5/6] ARM: Don't set TLB ops broadcasting on UP ARMv7   Russell King - ARM Linux
• [PATCH v3] davinci: Initial support for MityDSP-L138/MityARM-1808   Sergei Shtylyov
• [PATCH v3] davinci: Initial support for MityDSP-L138/MityARM-1808   Kevin Hilman
• [PATCH 5/6] ARM: Don't set TLB ops broadcasting on UP ARMv7   Tony Lindgren
• [PATCH v3] davinci: Initial support for MityDSP-L138/MityARM-1808   Kevin Hilman
• [PATCH 5/6] ARM: Don't set TLB ops broadcasting on UP ARMv7   Russell King - ARM Linux
• [PATCH 20/24] msm: MSM8X60 simulator board support   David Brown
• invalid address returned by usb_alloc_coherent on dockstar   MacLaren, James M
• [PATCH 20/24] msm: MSM8X60 simulator board support   Russell King - ARM Linux
• invalid address returned by usb_alloc_coherent on dockstar   Russell King - ARM Linux
• [PATCH 31/74] ST SPEAr: Adding support for SSP PL022   Linus Walleij
• [PATCH 1/6] ARM: Add inline function smp_cpu() for early init testing   Tony Lindgren
• [PATCH 6/6] omap: Fix SMP on UP interrupt handling for multi-omap   Tony Lindgren
• [PATCH 2/3] plat-nomadik: Added suspend/resume support for MTU timer.   Linus Walleij
• [PATCH 2/3] plat-nomadik: Added suspend/resume support for MTU timer.   Linus Walleij
• [PATCH 1/2 v2] msm: Install the Google-Android gpio driver.   Gregory Bean
• [PATCH 2/3] plat-nomadik: Added suspend/resume support for MTU timer.   Linus Walleij
• [PATCH] arm mach-at91 use choice keyword for board type selection in Kconfig   Paul Chavent
• [PATCH 4/5] [ARM] Auto calculate ZRELADDR and provide option for exceptions   Russell King - ARM Linux
• [PATCH 4/5] [ARM] Auto calculate ZRELADDR and provide option for exceptions   Russell King - ARM Linux
• invalid address returned by usb_alloc_coherent on dockstar   Martin Fuzzey
• [PATCH] [ARM] tegra: Add i2c support   Colin Cross
• [PATCH] [ARM] tegra: Add i2c support   Colin Cross
• [PATCH] [ARM] tegra: Add i2c support   Colin Cross
• [PATCH] [ARM] tegra: Add i2c support   Colin Cross
• [PATCH] [ARM] tegra: Add i2c support   Colin Cross
• [PATCH 14/24] msm: add hotplug stub functions   Daniel Walker
• [PATCH 14/24] msm: add hotplug stub functions   Daniel Walker
• [PATCH] arm mach-at91 use choice keyword for board type selection in Kconfig   Jean-Christophe PLAGNIOL-VILLARD
• invalid address returned by usb_alloc_coherent on dockstar   MacLaren, James M
• [PATCH] ARM: SAMSUNG: Removed redunt zreladdr in Makefile.boot   Kukjin Kim
• [PATCH v2 1/2] msm: i2c: Add msm_qup_i2c.h   Kenneth Heitke
• [PATCH v2] ep93xx: move clock initialization earlier   H Hartley Sweeten
• [PATCH v2 1/2] msm: i2c: Add msm_qup_i2c.h   Kenneth Heitke
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Tony Lindgren
• [PATCH 1/6] ARM: Add inline function smp_cpu() for early init testing   Tony Lindgren
• [PATCH] Fix smp_on_up detection   Tony Lindgren
• [PATCH] regulators: add support max8952 regulator   Kukjin Kim
• [PATCH] regulators: add support max8952 regulator   Kukjin Kim
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Tony Lindgren
• [PATCH 08/74] ST SPEAr1300: Adding default config file   Nicolas Pitre
• [PATCH 1/6] ARM: Add inline function smp_cpu() for early init testing   Tony Lindgren
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Jason Wang
• [PATCH 14/74] ST SPEAr: Adding PLGPIO driver for spear platform   viresh kumar
• [PATCH 31/74] ST SPEAr: Adding support for SSP PL022   viresh kumar
• [PATCH 38/74] ST SPEAr3xx: Rearranging declarations in clock.c file   viresh kumar
• [PATCH 40/74] ST SPEAr 13xx : Adding support for SPEAr1310   viresh kumar
• [PATCH 72/74] SPEAr13xx: Replace defconfigs with single unfied defconfig   viresh kumar
• [PATCH 31/74] ST SPEAr: Adding support for SSP PL022   viresh kumar
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Bryan Wu
• [PATCH 5/5] ARM: pxa168: aspenite: add board support for keypad   Mark F. Brown
• [PATCH] Serial: Samsung: Fix uart clock init order   shaju.abraham at linaro.org
• [PATCH 4/6] ARM: mx51: Add spi clock and spi_imx device registration   Jason Wang
• [PATCH 52/74] ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms   Sundar
• [PATCH] ARM: Implement cpu_v7_reset.   Mika Westerberg
• [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU   Jason Wang
• [PATCH 49/74] SPEAr CPU freq: Adding support for CPU Freq framework   deepaksi
• [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions   Jason Wang
• [PATCH 3/6] mx5: add support to dynamically register spi_imx devices (imx51 3ds)   Jason Wang
• [PATCH 5/6] mx51_3ds: add eCSPI2 support on the imx51_3ds board   Jason Wang
• [PATCH 48/74] GIC: Added dummy handlers for Power Management Suspend Resume   deepaksi
• [PATCH 05/74] ST SPEAr13XX: Adding machine specific src files   Shiraz Hashim
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Amit Kucheria
• [PATCH 04/74] ST SPEAr13XX: Adding machine specific header files   Shiraz Hashim
• [PATCH 27/74] ST SPEAr : NAND interface driver for spear platforms   Vipin Kumar
• [PATCH 14/24] msm: add hotplug stub functions   Russell King - ARM Linux
• [PATCH 08/74] ST SPEAr1300: Adding default config file   Russell King - ARM Linux
• [PATCH 48/74] GIC: Added dummy handlers for Power Management Suspend Resume   Russell King - ARM Linux
• [PATCH] ARM: SAMSUNG: Removed redunt zreladdr in Makefile.boot   Russell King - ARM Linux
• [PATCH 08/74] ST SPEAr1300: Adding default config file   viresh kumar
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Russell King - ARM Linux
• [PATCH 4/5] [ARM] Auto calculate ZRELADDR and provide option for exceptions   Uwe Kleine-König
• [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU   Uwe Kleine-König
• [PATCH] ARM: PL330: Accept revisions of the dmac   Jassi Brar
• [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU   Lothar Waßmann
• [PATCH 1/6] ARM: Add inline function smp_cpu() for early init testing   Will Deacon
• [PATCH 1/6] ARM: Add inline function smp_cpu() for early init testing   Russell King - ARM Linux
• [PATCH 1/6] ARM: Add inline function smp_cpu() for early init testing   Will Deacon
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Russell King - ARM Linux
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Russell King - ARM Linux
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Robert Schwebel
• [PATCH] regulators: add support max8952 regulator   Mark Brown
• [PATCH 4/5] [ARM] Auto calculate ZRELADDR and provide option for exceptions   Uwe Kleine-König
• [PATCH 1/7] ARM: specify ZRELADDR for ARCH_TEGRA   Uwe Kleine-König
• [PATCH 2/7] [RFC] ARM: shmobile: remove unneeded hack to calculate zreladdr   Uwe Kleine-König
• [PATCH 3/7] ARM: specify ZRELADDR for ARCH_H720X   Uwe Kleine-König
• [PATCH 4/7] ARM: specify ZRELADDR for ARCH_LPC32XX   Uwe Kleine-König
• [PATCH 5/7] ARM: don't expose CONFIG_ZRELADDR to the users   Uwe Kleine-König
• [PATCH 6/7] ARM: fix ordering of defaults for config ZRELADDR   Uwe Kleine-König
• [PATCH 7/7] ARM: removed unused zreladdr specifications in all Makefile.boot files   Uwe Kleine-König
• [PATCH V3] arm & sh: factorised duplicated clkdev.c   Magnus Damm
• [PATCH/RFCv4 0/6] The Contiguous Memory Allocator framework   KAMEZAWA Hiroyuki
• [PATCH V3] arm & sh: factorised duplicated clkdev.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 27/74] ST SPEAr : NAND interface driver for spear platforms   Sebastian RASMUSSEN
• [PATCH 27/74] ST SPEAr : NAND interface driver for spear platforms   Alessandro Rubini
• [PATCH 2/3] plat-nomadik: Added suspend/resume support for MTU timer.   Alessandro Rubini
• lazy disabling and idle states   Thomas Gleixner
• [PATCH 2/6] ARM: Use SMP and UP macros for cacheflush   Shilimkar, Santosh
• [PATCH 4/6] ARM: Do not call test_for_ipi or test_for_ltrirq on UP systems   Shilimkar, Santosh
• [PATCH 0/2] ARM: factorise CPU hotplug code   Sundar Iyer
• [PATCH 1/2] ARM: Generalize all CPU Hotplug code across platforms   Sundar Iyer
• [PATCH 2/2] ux500: Add CPU hotplug support   Sundar Iyer
• imx.c : dte mode and modem control   Wolfram Sang
• [PATCH 6/6] omap: Fix SMP on UP interrupt handling for multi-omap   Shilimkar, Santosh
• [PATCH 1/6] ARM: Add inline function smp_on_up() for early init testing   Shilimkar, Santosh
• [PATCH 1/6] ARM: Add inline function smp_cpu() for early init testing   Shilimkar, Santosh
• [PATCH 6/6] omap: Fix SMP on UP interrupt handling for multi-omap   Shilimkar, Santosh
• [PATCH 1/6] ARM: Add inline function smp_cpu() for early init testing   Will Deacon
• [PATCH 1/6] ARM: Add inline function smp_cpu() for early init testing   Shilimkar, Santosh
• [PATCH] AT91: SAM9G45 - add a separate clock entry for every single TC block   Fabian Godehardt
• [PATCH] AT91: SAM9G45 - add a separate clock entry for every single TC block   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] AT91: SAM9G45 - add a separate clock entry for every single TC block   Nicolas Ferre
• [PATCH 5/7] ARM: don't expose CONFIG_ZRELADDR to the users   Eric Miao
• [PATCH 4/5] [ARM] Auto calculate ZRELADDR and provide option for exceptions   Eric Miao
• [PATCH 2/7] [RFC] ARM: shmobile: remove unneeded hack to calculate zreladdr   Eric Miao
• [PATCH 3/7] ARM: specify ZRELADDR for ARCH_H720X   Eric Miao
• [PATCH 4/7] ARM: specify ZRELADDR for ARCH_LPC32XX   Eric Miao
• [PATCH 5/5] ARM: pxa168: aspenite: add board support for keypad   Marek Vasut
• [PATCH 5/5] ARM: pxa168: aspenite: add board support for keypad   Eric Miao
• [PATCH 7/7] ARM: removed unused zreladdr specifications in all Makefile.boot files   Eric Miao
• Keyboard for HTC-Dream   David Lanzendörfer
• Keyboard for HTC-Dream   Gregory Bean
• [PATCH 14/24] msm: add hotplug stub functions   Daniel Walker
• [PATCH] AT91: SAM9G45 - add a separate clock entry for every single TC block   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pio: add arch specific gpio_is_valid() function   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Tony Lindgren
• [PATCH 27/74] ST SPEAr : NAND interface driver for spear platforms   Linus Walleij
• Keyboard for HTC-Dream   David Lanzendörfer
• [PATCH 2/3] plat-nomadik: Added suspend/resume support for MTU timer.   Linus Walleij
• [PATCH 1/7] ARM: specify ZRELADDR for ARCH_TEGRA   Erik Gilling
• [PATCH] ARM: Implement cpu_v7_reset.   Per Fransson
• [PATCH RESEND] ARM: s3c2440: fix boot failure introduced by recent changes in gpiolib   Abdoulaye Walsimou Gaye
• [PATCH v2 RESEND] ARM: s3c2440: various fixes in Kconfig file   Abdoulaye Walsimou Gaye
• [PATCH V3] arm & sh: factorised duplicated clkdev.c   Uwe Kleine-König
• [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Jonathan Nieder
• [PATCH 7/7 v2] ARM: removed unused zreladdr specifications in all Makefile.boot files   Uwe Kleine-König
• [PATCH 2/7] [RFC] ARM: shmobile: remove unneeded hack to calculate zreladdr   Uwe Kleine-König
• [PATCH 5/7] ARM: don't expose CONFIG_ZRELADDR to the users   Uwe Kleine-König
• [PATCH 1/7] ARM: specify ZRELADDR for ARCH_TEGRA   Uwe Kleine-König
• [PATCH 1/7] ARM: specify ZRELADDR for ARCH_TEGRA   Erik Gilling
• [PATCH 1/7] ARM: specify ZRELADDR for ARCH_TEGRA   Uwe Kleine-König
• [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Russell King - ARM Linux
• [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Uwe Kleine-König
• [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Matthieu Moy
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Russell King - ARM Linux
• [PATCH] MMC: move regulator handling closer to core v2   Linus Walleij
• [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Andreas Schwab
• GIT pull request: arm: lpc32xx_up1   Kevin Wells
• [PATCH] ARM: pxa: Fix pxa3xx-u2d crash when ULPI not used   Marek Vasut
• [PATCH 4/5] [ARM] Auto calculate ZRELADDR and provide option for exceptions   Uwe Kleine-König
• [PATCH] ARM: Update RealView defconfig   Linus Walleij
• [PATCH] ARM: update U300 defconfig   Linus Walleij
• [PATCH] ARM: SAMSUNG: Removed redunt zreladdr in Makefile.boot   Kukjin Kim
• [PATCH] ARM: expose PB1176 ROM in debugfs   Linus Walleij
• [PATCH] regulators: add support max8952 regulator   Kukjin Kim
• [PATCH v2 0/6] ARM: pxa168: add keypad support   David Miller
• [PATCH v2 0/6] ARM: pxa168: add keypad support   Mark F. Brown
• [PATCH v2 0/6 RESEND] ARM: pxa168: add keypad support   Mark F. Brown
• [PATCH v2 1/6 RESEND] ARM: pxa27x/pxa3xx: moved pxa27x_keypad.h to platform pxa directory   Mark F. Brown
• [PATCH v2 2/6 RESEND] ARM: pxa168: added keypad support   Mark F. Brown
• [PATCH v2 3/6 RESEND] ARM: pxa168: added wake clear register support for APMU   Mark F. Brown
• [PATCH v2 4/6 RESEND] ARM: pxa27x_keypad: added wakeup event handler for keypad interrupts   Mark F. Brown
• [PATCH v2 5/6 RESEND] ARM: pxa168: added keypad wake clear event support for platform   Mark F. Brown
• [PATCH v2 6/6 RESEND] ARM: pxa168: aspenite: add board support for keypad   Mark F. Brown
• [PATCH] ARM: PL330: Accept revisions of the dmac   Kukjin Kim
• [bug-patch] [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Andreas Gruenbacher
• [bug-patch] [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Jonathan Nieder
• [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Russell King - ARM Linux
• [PATCH] ARM: PL330: Accept revisions of the dmac   Jassi Brar
• [PATCH v2 1/6] ARM: pxa27x/pxa3xx: moved pxa27x_keypad.h to platform pxa directory   Marek Vasut
• [PATCH v2 6/6] ARM: pxa168: aspenite: add board support for keypad   Marek Vasut
• [PATCH] ARM: expose PB1176 ROM in debugfs   Marek Vasut
• [Openpxa-users] Colibri PXA320 Power management question   Marek Vasut
• Question about lowmemorykiller of kernel_armdroid   David Yang
• [PATCH v2 6/6] ARM: pxa168: aspenite: add board support for keypad   Mark F. Brown
• [bug-patch] [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: uaccess: Implement strict user copy checks   Stephen Boyd
• [PATCH v2 6/6] ARM: pxa168: aspenite: add board support for keypad   Marek Vasut
• [PATCH] ARM: pxa: Fix pxa3xx-u2d crash when ULPI not used   Eric Miao
• [PATCH] MMC: move regulator handling closer to core v2   Adrian Hunter
• [PATCH v2 1/6 RESEND] ARM: pxa27x/pxa3xx: moved pxa27x_keypad.h to platform pxa directory   Eric Miao
• [PATCH v2 2/6 RESEND] ARM: pxa168: added keypad support   Eric Miao
• [PATCH v2 3/6 RESEND] ARM: pxa168: added wake clear register support for APMU   Eric Miao
• [PATCH v2 4/6 RESEND] ARM: pxa27x_keypad: added wakeup event handler for keypad interrupts   Eric Miao
• [PATCH v2 5/6 RESEND] ARM: pxa168: added keypad wake clear event support for platform   Eric Miao
• [PATCH v2 6/6 RESEND] ARM: pxa168: aspenite: add board support for keypad   Eric Miao
• [PATCH 5/7] ARM: don't expose CONFIG_ZRELADDR to the users   Eric Miao
• [PATCH 7/7] omap3: make coresight register save across OFF modes a sysfs option   Cousson, Benoit
• [PATCH 3/3] davinci: Map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE   Shilimkar, Santosh
• [PATCH 4/6] ARM: Do not call test_for_ipi or test_for_ltrirq on UP systems   Russell King - ARM Linux
• [PATCH 4/6] ARM: Do not call test_for_ipi or test_for_ltrirq on UP systems   Russell King - ARM Linux
• [PATCH 2/6] ARM: Use SMP and UP macros for cacheflush   Russell King - ARM Linux
• [PATCH 2/6] ARM: Use SMP and UP macros for cacheflush   Shilimkar, Santosh
• [PATCH 6/6] omap: Fix SMP on UP interrupt handling for multi-omap   Russell King - ARM Linux
• [PATCH 6/6] omap: Fix SMP on UP interrupt handling for multi-omap   Shilimkar, Santosh
• [PATCH v5 3/7] wireless: wl12xx: add platform data passing support   Michał Mirosław
• [PATCH 03/24] arm: mm: add proc info for ScorpionMP   Russell King - ARM Linux
• [PATCH 03/24] arm: mm: add proc info for ScorpionMP   Russell King - ARM Linux
• [PATCH] davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform   Michael Williamson
• Commit b2811c84e... breaks boot on net5big   Albert ARIBAUD
• [PATCH 6/9] esdhc-2 mxc: Modify the MSL codes when upstreaming fsl esdhc driver   Uwe Kleine-König
• [PATCH 7/9] esdhc-3 mx51: Modify the MSL codes when upstreaming fsl esdhc driver   Uwe Kleine-König
• [bug-patch] Re: [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Andreas Gruenbacher
• [bug-patch] Re: [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Russell King - ARM Linux
• [bug-patch] Re: [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Andreas Gruenbacher
• [bug-patch] [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Andreas Gruenbacher
• [bug-patch] Re: [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Russell King - ARM Linux
• [bug-patch] Re: [BUG?] rename patch accepted with --dry-run, rejected without (Re: [PATCH V3] arm & sh: factorised duplicated clkdev.c)   Andreas Gruenbacher
• [PATCH 1/6] ARM: Add inline function smp_cpu() for early init testing   Michał Nazarewicz
• [PATCH] ARM: pxa: Fix pxa3xx-u2d crash when ULPI not used   Igor Grinberg
• [PATCH] ARM: pxa: Fix pxa3xx-u2d crash when ULPI not used   Marek Vasut
• [PATCH v2 4/6 RESEND] ARM: pxa27x_keypad: added wakeup event handler for keypad interrupts   Igor Grinberg
• [PATCH] ARM: pxa: Fix pxa3xx-u2d crash when ULPI not used   Igor Grinberg
• [PATCH] ARM: pxa: Fix pxa3xx-u2d crash when ULPI not used   Marek Vasut
• [PATCH] ARM: pxa: Fix pxa3xx-u2d crash when ULPI not used   Igor Grinberg
• [PATCH] MMC: move regulator handling closer to core v2   Mark Brown
• [PATCH] MMC: move regulator handling closer to core v2   Linus Walleij
• [PATCH] MMC: move regulator handling closer to core v3   Linus Walleij
• [PATCH] ARM: PL330: Accept revisions of the dmac   Linus Walleij
• [PATCH] ARM: PL330: Accept revisions of the dmac   Jassi Brar
• [PATCH] davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform   Sergei Shtylyov
• [PATCH] ARM: pxa: Fix pxa3xx-u2d crash when ULPI not used   Eric Miao
• [PATCH v2 4/6 RESEND] ARM: pxa27x_keypad: added wakeup event handler for keypad interrupts   Eric Miao
• [PATCH] arm: fix pci_set_consistent_dma_mask for dmabounce devices   Eric Miao
• [PATCH] pxa168fb: Add .remove function   Eric Miao
• [PATCH] arm: fix pci_set_consistent_dma_mask for dmabounce devices   Russell King - ARM Linux
• [PATCH] arm: fix pci_set_consistent_dma_mask for dmabounce devices   Russell King - ARM Linux
• [PATCH] pxa168fb: fix clear operation   Eric Miao
• [PATCH] arm: fix pci_set_consistent_dma_mask for dmabounce devices   Eric Miao
• [PATCH] davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform   Michael Williamson
• [PATCH] ARM: pxa: Fix pxa3xx-u2d crash when ULPI not used   Igor Grinberg
• [PATCH] ARM: pxa: Fix pxa3xx-u2d crash when ULPI not used   Eric Miao
• [PATCH] ARM: pxa: Fix pxa3xx-u2d crash when ULPI not used   Igor Grinberg
• [PATCH v2 4/6 RESEND] ARM: pxa27x_keypad: added wakeup event handler for keypad interrupts   Mark F. Brown
• [PATCH] ARM: pxa27x_keypad: added a comment to explain clear_wakeup_event callback   Mark F. Brown
• [PATCH/RFCv4 0/6] The Contiguous Memory Allocator framework   Minchan Kim
• [PATCH v1] davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform   Michael Williamson
• [PATCH 4/5] [ARM] Auto calculate ZRELADDR and provide option for exceptions   Uwe Kleine-König
• [PATCH] ARM: pxa: Fix pxa3xx-u2d crash when ULPI not used   Marek Vasut
• [PATCH] arm: fix pci_set_consistent_dma_mask for dmabounce devices   FUJITA Tomonori
• [PATCH/RFCv4 0/6] The Contiguous Memory Allocator framework   KAMEZAWA Hiroyuki
• Cpufreq for s3c2440 FriendlyArm   Marek Vasut
• [PATCH] ARM: pxa27x_keypad: added a comment to explain clear_wakeup_event callback   Eric Miao
• [PATCH] Platform fixes for s5p-fimc   Marek Szyprowski
• [PATCH 1/4] ARM: S5PC110: add fimc clocks.   Marek Szyprowski
• [PATCH 2/4] ARM: Samsung: s5p-fimc: fix dma coherent mask   Marek Szyprowski
• [PATCH 3/4] ARM: S5PC110: add common FIMC setup code   Marek Szyprowski
• [PATCH 4/4] ARM: S5PC110: use common FIMC clock setup code   Marek Szyprowski
• [PATCH 3/4] ARM: S5PC110: add common FIMC setup code   Marek Vasut
• [PATCH 3/4] ARM: S5PC110: add common FIMC setup code   Marek Szyprowski
• [PATCH 3/4] ARM: S5PC110: add common FIMC setup code   Marek Vasut
• [PATCH 0/2] ARM: factorise CPU hotplug code   Sundar R IYER
• [PATCH] AT91: SAM9G45 - add a separate clock entry for every single TC block   Fabian Godehardt
• [PATCH 3/4] ARM: S5PC110: add common FIMC setup code   Jassi Brar
• [PATCH 1/5] ptp: Added a brand new class driver for ptp clocks.   Richard Cochran
• [RFCv5 0/9] CMA + VCMM integration   Michal Nazarewicz
• [RFCv5 1/9] lib: rbtree: rb_root_init() function added   Michal Nazarewicz
• [RFCv5 2/9] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [RFCv5 3/9] mm: cma: Added SysFS support   Michal Nazarewicz
• [RFCv5 4/9] mm: cma: Added command line parameters support   Michal Nazarewicz
• [RFCv5 5/9] mm: cma: Test device and application added   Michal Nazarewicz
• [RFCv5 6/9] ARM: cma: Added CMA to Aquila, Goni and c210 universal boards   Michal Nazarewicz
• [RFCv5 7/9] mm: vcm: Virtual Contiguous Memory framework added   Michal Nazarewicz
• [RFCv5 8/9] mm: vcm: Sample driver added   Michal Nazarewicz
• [RFCv5 9/9] mm: vcm: vcm-cma: VCM CMA driver added   Michal Nazarewicz
• [PATCH 0/2] ARM: factorise CPU hotplug code   Shilimkar, Santosh
• [PATCH 0/2] ARM: factorise CPU hotplug code   Sundar R IYER
• [PATCH 2/3] plat-nomadik: Added suspend/resume support for MTU timer.   Armando Visconti
• [PATCH 27/74] ST SPEAr : NAND interface driver for spear platforms   Armando Visconti
• [PATCH 3/3] mach-ux500: Added nomadik mtu timer suspend/resume hooks.   Jonas Aaberg
• [PATCH 0/2] ARM: factorise CPU hotplug code   Shilimkar, Santosh
• [PATCH 45/74] SPEAr : SEV Send event to secondary CPUs   Shiraz Hashim
• [PATCH] ARM: PL330: Accept revisions of the dmac   Linus Walleij
• [PATCH 3/4] ARM: S5PC110: add common FIMC setup code   Marek Szyprowski
• [PATCH 0/2] ARM: factorise CPU hotplug code   Russell King - ARM Linux
• [PATCH] ARM: Implement cpu_v7_reset.   Per Fransson
• [PATCH] SPI: move PL022 probe call to subsys_initcall()   Linus Walleij
• [PATCH 3/4] ARM: S5PC110: add common FIMC setup code   Marek Szyprowski
• [PATCH v3] ARM: S5P: Add support for gpio interrupts   Marek Szyprowski
• [PATCH 1/6] ARM: Samsung: Add common s5p gpio interrupt support   Marek Szyprowski
• [PATCH 2/6] ARM: S5PC110: add support for gpio interrupts   Marek Szyprowski
• [PATCH 3/6] ARM: S5PC100: Use generic S5P gpio interrupts interface   Marek Szyprowski
• [PATCH 4/6] ARM: S5PC100: Move external interrupt defines   Marek Szyprowski
• [PATCH 5/6] ARM: Samsung: Add common samsung_gpiolib_to_irq function   Marek Szyprowski
• [PATCH 6/6] ARM: S5PC110: GONI: Add support for QT602240 TS driver   Marek Szyprowski
• [PATCH 3/4] ARM: S5PC110: add common FIMC setup code   Jassi Brar
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Catalin Marinas
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Russell King - ARM Linux
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Catalin Marinas
• [PATCH 10/74] ST SPEAr: Adding support for CLCD on SPEAr3xx/6xx   viresh kumar
• [PATCH 1/4] ARM: l2x0: Fix coding-style in the cache-l2x0.h   Catalin Marinas
• [PATCH 3/4] ARM: l2x0: Determine the cache size   Catalin Marinas
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to,from}_user?   Wolfgang Wegner
• [PATCH 32/74] ST SPEAr: Adding clk_set_rate support   viresh kumar
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Russell King - ARM Linux
• Colibri PXA320 Power management question   Mark Brown
• [PATCH 1/6] ARM: Add inline function smp_on_up() for early init testing   Bryan Wu
• [PATCH 3/4] ARM: S5PC110: add common FIMC setup code   Marek Szyprowski
• [PATCH 4/4] ARM: l2x0: Optmise the range based operations   Catalin Marinas
• [PATCH] s3c2410_udc: Add handling for S3C244X dual-packet mode   Vasily Khoruzhick
• A serial patchs that support FSL's eSDHC   Wolfram Sang
• Support for platform-esdhc-controller   Wolfram Sang
• [RFC 1/3] sdhci-pltfm: Add structure for host-specific data   Wolfram Sang
• [RFC 2/3] mmc: add driver for imx35/51   Wolfram Sang
• [RFC 3/3] pcm043: add resources for mmc   Wolfram Sang
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Catalin Marinas
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Russell King - ARM Linux
• [PATCH 8/9] esdhc-4 esdhc: fsl esdhc driver based on platform sdhci api   Wolfram Sang
• Colibri PXA320 Power management question   Mike Rapoport
• Colibri PXA320 Power management question   Eric Miao
• [PATCH] AT91: SAM9G45 - add a separate clock entry for every single TC block   Nicolas Ferre
• [PATCH] pxa168fb: fix clear operation   Haojian Zhuang
• [PATCH 35/74] ST SPEAr: Enabling clocks before amba device registeration   viresh kumar
• [PATCH 3/4] ARM: S5PC110: add common FIMC setup code   Jassi Brar
• Colibri PXA320 Power management question   Mark Brown
• Colibri PXA320 Power management question   Haojian Zhuang
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Catalin Marinas
• [PATCH 07/74] ST SPEAr13XX: Added compilation support in arch/arm/   viresh kumar
• [PATCH 48/74] GIC: Added dummy handlers for Power Management Suspend Resume   deepaksi
• [PATCH v5 3/7] wireless: wl12xx: add platform data passing support   Ohad Ben-Cohen
• [PATCH v5 3/7] wireless: wl12xx: add platform data passing support   Russell King - ARM Linux
• colibri-pxa300: LCD_LDD / LCD_CS gpio conflict   pieterg
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to, from}_user?   saeed bishara
• [PATCH v5 3/7] wireless: wl12xx: add platform data passing support   Ohad Ben-Cohen
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to,from}_user?   Wolfgang Wegner
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to,from}_user?   Russell King - ARM Linux
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to,from}_user?   Wolfgang Wegner
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to,from}_user?   Wolfgang Wegner
• [PATCH v2] AT91: pio: add gpio_is_valid() function   Nicolas Ferre
• [PATCH 00/14] Removing dead code   Christian Dietrich
• [PATCH 01/14] arch/arm: Removing undead ifdef __ASSEMBLY__   Christian Dietrich
• [PATCH v2] atmel_macb Kconfig: remove long dependency line   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Catalin Marinas
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Russell King - ARM Linux
• [PATCH 9/9] ARM: Add SWP/SWPB emulation for ARMv7 processors (v5)   Catalin Marinas
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Catalin Marinas
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Russell King - ARM Linux
• [PATCH 3/6] ARM: Fix v7wbi_tlb_flags for SMP on UP   Catalin Marinas
• Cpufreq for s3c2440 FriendlyArm   Marek Vasut
• [PATCH] ARM: Implement cpu_v7_reset.   Mika Westerberg
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Tony Lindgren
• [PATCH 15/74] ST SPEAr: adding support for rtc   Alessandro Zummo
• [PATCH v5 3/7] wireless: wl12xx: add platform data passing support   Michał Mirosław
• [PATCH] ARM: pxa: Enable U2D only in case PXA3xx is enabled   Marek Vasut
• [PATCH] AT91: SAM9G45 - add a separate clock entry for every single TC block   avictor.za at gmail.com
• [RFCv5 3/9] mm: cma: Added SysFS support   Greg KH
• [RFCv5 0/9] CMA + VCMM integration   Greg KH
• [RFCv5 8/9] mm: vcm: Sample driver added   Greg KH
• [PATCH 03/24] arm: mm: add proc info for ScorpionMP   Daniel Walker
• bounce: call flush_dcache_page after bounce_copy_vec   Gary King
• [PATCH 43/74] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 15/74] ST SPEAr: adding support for rtc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/74] ST SPEAr: Padmux code Updated   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/74] ST SPEAr: Formalized timer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/74] ST SPEAr: Correcting SOC Config base address for spear320   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/74] ST SPEAr: Update clock framework and definitions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 16/74] ST SPEAr: adding support for synopsis i2c designware   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: PL330: Accept revisions of the dmac   Jassi Brar
• [RFCv5 0/9] CMA + VCMM integration   Michał Nazarewicz
• [PATCH v2] AT91: pio: add gpio_is_valid() function   David Brownell
• [RFCv5 8/9] mm: vcm: Sample driver added   Michał Nazarewicz
• [PATCH] pio: add arch specific gpio_is_valid() function   David Brownell
• [PATCH] pxa168fb: fix clear operation   Eric Miao
• [PATCH] ARM: pxa: Enable U2D only in case PXA3xx is enabled   Eric Miao
• [RFCv5 0/9] CMA + VCMM integration   Greg KH
• colibri-pxa300: LCD_LDD / LCD_CS gpio conflict   Eric Miao
• [PATCH] pio: add arch specific gpio_is_valid() function   Ryan Mallon
• [PATCH 15/74] ST SPEAr: adding support for rtc   rajeev
• [PATCH 01/74] ST SPEAr: Padmux code Updated   viresh kumar
• [PATCH] pio: add arch specific gpio_is_valid() function   Eric Miao
• [PATCH 13/74] ST SPEAr: Update clock framework and definitions   viresh kumar
• [PATCH 16/74] ST SPEAr: adding support for synopsis i2c designware   viresh kumar
• [PATCH 13/74] ST SPEAr: Update clock framework and definitions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pio: add arch specific gpio_is_valid() function   Ryan Mallon
• [PATCH 01/74] ST SPEAr: Padmux code Updated   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pxa: fix cpu_is_pxa*() not expanded to zero when not configured   Eric Miao
• [PATCH 01/74] ST SPEAr: Padmux code Updated   viresh kumar
• [PATCH 16/74] ST SPEAr: adding support for synopsis i2c designware   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pxa: fix cpu_is_pxa*() not expanded to zero when not configured   Marek Vasut
• [PATCH] pio: add arch specific gpio_is_valid() function   Eric Miao
• [PATCH] pio: add arch specific gpio_is_valid() function   Ryan Mallon
• [PATCH 0/5] rtc: rtc-s3c: Fix RTC bugs for RTC-S3C   Kukjin Kim
• [PATCH 1/5] rtc: rtc-s3c: Fix access unit from byte to word on RTCCON   Kukjin Kim
• [PATCH 2/5] rtc: rtc-s3c: Fix setting missing field of getalarm   Kukjin Kim
• [PATCH 3/5] rtc: rtc-s3c: Fix on support RTC Alarm   Kukjin Kim
• [PATCH 4/5] rtc: rtc-s3c: Fix on RTC initialization method   Kukjin Kim
• [PATCH 5/5] rtc: rtc-s3c: Fix debug message format on RTC   Kukjin Kim
• [RFCv5 3/9] mm: cma: Added SysFS support   Michał Nazarewicz
• [PATCH] ARM: pxa: Enable U2D only in case PXA3xx is enabled   Igor Grinberg
• [RFCv5 3/9] mm: cma: Added SysFS support   Greg KH
• [PATCH] ARM: pxa: Enable U2D only in case PXA3xx is enabled   Eric Miao
• [PATCH] ARM: pxa: Enable U2D only in case PXA3xx is enabled   Igor Grinberg
• [PATCH] pio: add arch specific gpio_is_valid() function   David Brownell
• [PATCH] ARM: pxa: Enable U2D only in case PXA3xx is enabled   Eric Miao
• [RFCv5 3/9] mm: cma: Added SysFS support   Michał Nazarewicz
• kernel porting   rainbowczj rainbowczj
• [PATCH 4/4] ARM: l2x0: Optmise the range based operations   Shilimkar, Santosh
• colibri-pxa300: LCD_LDD / LCD_CS gpio conflict   pieterg
• [PATCH v2] regulators: add support max8952 regulator   Kukjin Kim
• colibri-pxa300: LCD_LDD / LCD_CS gpio conflict   Eric Miao
• [PATCH 0/6] ARM: l2x0: kexex, cleanup and optimisation   Santosh Shilimkar
• [PATCH 3/6] omap4: l2x0: Override the default l2x0_disable   Santosh Shilimkar
• [PATCH 4/6] ARM: l2x0: Fix coding-style in the cache-l2x0.h   Santosh Shilimkar
• [PATCH 5/6] ARM: l2x0: Determine the cache size   Santosh Shilimkar
• [PATCH 6/6] ARM: l2x0: Optimise the range based operations   Santosh Shilimkar
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to, from}_user?   saeed bishara
• [PATCH 15/74] ST SPEAr: adding support for rtc   viresh kumar
• [PATCH 12/74] ST SPEAr: Correcting SOC Config base address for spear320   viresh kumar
• [PATCH] pio: add arch specific gpio_is_valid() function   Ben Nizette
• [PATCH 4/5] rtc: rtc-s3c: Fix on RTC initialization method   Kyungmin Park
• [PATCH 13/74] ST SPEAr: Update clock framework and definitions   viresh kumar
• [PATCH 13/74] ST SPEAr: Update clock framework and definitions   Russell King - ARM Linux
• colibri-pxa300: LCD_LDD / LCD_CS gpio conflict   pieterg
• [PATCH 13/74] ST SPEAr: Update clock framework and definitions   viresh kumar
• [PATCH 16/74] ST SPEAr: adding support for synopsis i2c designware   viresh kumar
• [PATCH 72/74] SPEAr13xx: Replace defconfigs with single unfied defconfig   viresh kumar
• [PATCH 0/2] ARM: factorise CPU hotplug code   Sundar R IYER
• [PATCH 8/9] esdhc-4 esdhc: fsl esdhc driver based on platform sdhci api   Zhu Richard-R65037
• [PATCH] pxa: fix cpu_is_pxa*() not expanded to zero when not configured   Sergei Shtylyov
• [PATCH 16/74] ST SPEAr: adding support for synopsis i2c designware   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pxa: fix cpu_is_pxa*() not expanded to zero when not configured   Eric Miao
• colibri-pxa300: LCD_LDD / LCD_CS gpio conflict   Eric Miao
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to, from}_user?   saeed bishara
• [PATCH v2] regulators: add support max8952 regulator   Mark Brown
• [PATCH 15/74] ST SPEAr: adding support for rtc   viresh kumar
• [PATCH 16/74] ST SPEAr: adding support for synopsis i2c designware   viresh kumar
• [PATCH 8/9] esdhc-4 esdhc: fsl esdhc driver based on platform sdhci api   Wolfram Sang
• [PATCH 43/74] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   viresh kumar
• colibri-pxa300: LCD_LDD / LCD_CS gpio conflict   pieterg
• [PATCH 1/6] pxa3xx_nand: make scan procedure more clear   Lei Wen
• [PATCH 07/74] ST SPEAr13XX: Added compilation support in arch/arm/   viresh kumar
• [PATCH 43/74] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 43/74] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   viresh kumar
• [PATCH v2] Input: Make ADS7846 independent on regulator   Igor Grinberg
• [RFC PATCH] ARM: Allow HIGHPTE with OUTER_CACHE if the processor supports outer PTWs   Catalin Marinas
• [RFC PATCH 0/3] Convert RealView/Versatile platforms to physmap-flash   Catalin Marinas
• [RFC PATCH 1/3] RealView: Convert the platform code to use the physmap flash driver   Catalin Marinas
• [RFC PATCH 2/3] Versatile: Convert the platform code to use the physmap flash driver   Catalin Marinas
• [RFC PATCH 3/3] VExpress: Convert the platform code to use the physmap flash driver   Catalin Marinas
• [PATCH v2] Input: Make ADS7846 independent on regulator   Mark Brown
• [PATCH 43/74] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] [RFC][ARM] pxa: rework pxa3xx-ulpi driver calls for ohci-pxa27x   Igor Grinberg
• [PATCH 0/3] rx1950: add rest of devices   Vasily Khoruzhick
• [PATCH 1/3] rx1950: add battery device   Vasily Khoruzhick
• [PATCH 2/3] rx1950: add LEDs support   Vasily Khoruzhick
• [PATCH 3/3] rx1950: add UDA1380 to i2c devices list   Vasily Khoruzhick
• [patch 28/30] arm: bcmring: semaphore cleanup   Thomas Gleixner
• [RFC 3/3] pcm043: add resources for mmc   Uwe Kleine-König
• [PATCH 0/5] h1940 series   Vasily Khoruzhick
• [PATCH 1/5] h1940: use gpiolib for latch access   Vasily Khoruzhick
• [PATCH 2/5] h1940: fix h1940-bluetooth compilation   Vasily Khoruzhick
• [PATCH 3/5] h1940: implement mmc_power function   Vasily Khoruzhick
• [PATCH 4/5] h1940: Fix backlight and LCD power functions   Vasily Khoruzhick
• [PATCH 0/2] s3c24xx: fix s3cmci DMA support   Vasily Khoruzhick
• [PATCH 2/2] s3cmci: minor fixups   Vasily Khoruzhick
• [PATCH v1] davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform   Kevin Hilman
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to, from}_user?   Wolfgang Wegner
• [PATCH] pio: add arch specific gpio_is_valid() function   David Brownell
• [PATCH] pio: add arch specific gpio_is_valid() function   David Brownell
• [PATCH 0/6] ARM: l2x0: kexex, cleanup and optimisation   Linus Walleij
• [PATCH 0/3] Fixing udelay() on SMP (and non-SMP too)   Stephen Boyd
• [PATCH 1/3] [ARM] Translate delay.S into (mostly) C   Stephen Boyd
• [PATCH 2/3] [ARM] Allow machines to override __delay()   Stephen Boyd
• [PATCH 3/3] [ARM] Implement a timer based __delay() loop   Stephen Boyd
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to, from}_user?   Nicolas Pitre
• [PATCH] pio: add arch specific gpio_is_valid() function   avictor.za at gmail.com
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to, from}_user?   Nicolas Pitre
• [PATCH] pio: add arch specific gpio_is_valid() function   Ryan Mallon
• [PATCH] AT91: SAM9G45 - add a separate clock entry for every single TC block   avictor.za at gmail.com
• Git pull request: disable Neon on old i.MX51   Nicolas Pitre
• [PATCH 1/2] ARM: link board specific files after core files   Nicolas Pitre
• [PATCH 2/2] ARM: mxc: turn off HWCAP_NEON for older versions of imx51 silicon   Nicolas Pitre
• [PATCH] bounce: call flush_dcache_page after bounce_copy_vec   Gary King
• [PATCH 07/74] ST SPEAr13XX: Added compilation support in arch/arm/   Russell King - ARM Linux
• [PATCH] pio: add arch specific gpio_is_valid() function   Alan Cox
• [PATCH] ARM: PL330: Accept revisions of the dmac   Linus Walleij
• [PATCH 5/7] ARM: don't expose CONFIG_ZRELADDR to the users   Mathieu Rondonneau
• [PATCH 1/3] rx1950: add battery device   Ben Dooks
• [PATCH 0/3] rx1950: add rest of devices   Ben Dooks
• [PATCH 1/3] rx1950: add battery device   Vasily Khoruzhick
• [PATCH 1/5] h1940: use gpiolib for latch access   Ben Dooks
• [PATCH 0/5] h1940 series   Ben Dooks
• [PATCH 0/2] s3c24xx: fix s3cmci DMA support   Ben Dooks
• [PATCH 2/2] s3cmci: minor fixups   Ben Dooks
• [PATCH 1/5] rtc: rtc-s3c: Fix access unit from byte to word on RTCCON   Ben Dooks
• [PATCH 2/5] rtc: rtc-s3c: Fix setting missing field of getalarm   Ben Dooks
• [PATCH 3/5] rtc: rtc-s3c: Fix on support RTC Alarm   Ben Dooks
• [PATCH 1/2] s3c24xx: DMA: don't use autoreload feature   Vasily Khoruzhick
• [PATCH 4/5] rtc: rtc-s3c: Fix on RTC initialization method   Ben Dooks
• [PATCH v3] regulators: add support max8952 regulator   Kukjin Kim
• [PATCH 5/5] rtc: rtc-s3c: Fix debug message format on RTC   Ben Dooks
• Cpufreq for s3c2440 FriendlyArm   Ben Dooks
• [PATCH v2 1/2] msm: i2c: Add msm_qup_i2c.h   David Brown
• [PATCH RESEND] ARM: s3c2440: fix boot failure introduced by recent changes in gpiolib   Ben Dooks
• [PATCH v2 RESEND] ARM: s3c2440: various fixes in Kconfig file   Ben Dooks
• [PATCH 1/2] s3c24xx: DMA: don't use autoreload feature   Ben Dooks
• [PATCH v2] regulators: add support max8952 regulator   Kukjin Kim
• [PATCH] pio: add arch specific gpio_is_valid() function   David Brownell
• [PATCH] pio: add arch specific gpio_is_valid() function   Alan Cox
• [PATCH 1/2] OMAP2+: PM: initial runtime PM core support   Kevin Hilman
• [PATCH 2/2] OMAP1: PM: add simple runtime PM layer to manage clocks   Kevin Hilman
• [PATCH v3] i2c: QUP based bus driver for Qualcomm MSM chipsets   Kenneth Heitke
• [PATCH] arm: fix use of clock disable on idle for simple AT91 devices   Greg Ungerer
• [PATCH 4/5] rtc: rtc-s3c: Fix on RTC initialization method   Wan ZongShun
• [PATCH v3] regulators: add support max8952 regulator   Kyungmin Park
• [PATCH 0/3] ARM: pxa168: Added Teton BGA Board Support   Mark F. Brown
• [PATCH 1/3] ARM: pxa168: added support for Teton BGA platform   Mark F. Brown
• [PATCH 2/3] ARM: pxa168/teton bga: added keypad support   Mark F. Brown
• [PATCH 3/3] ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337   Mark F. Brown
• [PATCH 0/4] Hacks to allow booting ARM SMP kernel on UP ARMv7   Tony Lindgren
• [PATCH] ARM: Check for is_smp for tlb_ops and cache_ops boardcast   Tony Lindgren
• [PATCH] ARM: Don't try to send IPI on UP systems with CONFIG_SMP   Tony Lindgren
• [PATCH] omap: Fix CONFIG_LOCAL_TIMERS initialization for multi-omap   Tony Lindgren
• [PATCH 1/6] ARM: Add inline function smp_on_up() for early init testing   Tony Lindgren
• [PATCH 6/6] omap: Fix SMP on UP interrupt handling for multi-omap   Tony Lindgren
• [PATCH 5/7] ARM: don't expose CONFIG_ZRELADDR to the users   Uwe Kleine-König
• [PATCH 3/3] ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337   Haojian Zhuang
• [PATCH 1/3] ARM: pxa168: added support for Teton BGA platform   Haojian Zhuang
• [PATCH 1/2] s3c24xx: DMA: don't use autoreload feature   Vasily Khoruzhick
• [PATCH] omap: Fix CONFIG_LOCAL_TIMERS initialization for multi-omap   Shilimkar, Santosh
• [PATCH] ARM: Don't try to send IPI on UP systems with CONFIG_SMP   Shilimkar, Santosh
• [PATCH 0/6] ARM: l2x0: kexex, cleanup and optimisation   Shilimkar, Santosh
• [PATCH v2 02/13] ARM: S5P64X0: Update Kconfig and Makefile   Kukjin Kim
• [PATCH v2 07/13] ARM: S5P64X0: Update Audio support   Kukjin Kim
• [PATCH v2 08/13] ARM: S5P64X0: Move DMA support for S5P64X0   Kukjin Kim
• [PATCH v2 10/13] ARM: S5P64X0: Move GPIO support files for merge S5P64X0   Kukjin Kim
• [RFC PATCH 0/3] Convert RealView/Versatile platforms to physmap-flash   Colin Tuckley
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to, from}_user?   Wolfgang Wegner
• [PATCH] ARM: Don't try to send IPI on UP systems with CONFIG_SMP   Russell King - ARM Linux
• [PATCH v2 1/3] rx1950: add battery device   Vasily Khoruzhick
• [PATCH] AT91: SAM9G45 - add a separate clock entry for every single TC block   Nicolas Ferre
• [PATCH 1/7] ARM: specify ZRELADDR for ARCH_TEGRA   Russell King - ARM Linux
• [PATCH 4/5] [ARM] Auto calculate ZRELADDR and provide option for exceptions   Russell King - ARM Linux
• [PATCH 4/5] [ARM] Auto calculate ZRELADDR and provide option for exceptions   Russell King - ARM Linux
• [PATCH v2 1/5] h1940: use gpiolib for latch access   Vasily Khoruzhick
• [PATCH] AT91: SAM9G45 - add a separate clock entry for every single TC block   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: S3C64XX: Fix dev-spi build   Mark Brown
• [PATCH 2/2] ARM: S3C64XX: Prototype SPI devices   Mark Brown
• [PATCH v3 02/13] ARM: S5P64X0: Update Kconfig and Makefile   Kukjin Kim
• [PATCH v2 04/13] ARM: S5P64X0: Update Clock for S5P6440 and S5P6450   Kukjin Kim
• [PATCH v3 07/13] ARM: S5P64X0: Update Audio support   Kukjin Kim
• [PATCH v3 08/13] ARM: S5P64X0: Move DMA support for S5P64X0   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Fix dev-spi build   Kukjin Kim
• [PATCH 1/7] ARM: specify ZRELADDR for ARCH_TEGRA   Russell King - ARM Linux
• [PATCH 1/2] ARM: S3C64XX: Fix dev-spi build   Mark Brown
• [PATCH 1/7] ARM: specify ZRELADDR for ARCH_TEGRA   Uwe Kleine-König
• [PATCH 1/2] ARM: S3C64XX: Fix dev-spi build   Kukjin Kim
• [PATCH v3] regulators: add support max8952 regulator   Kukjin Kim
• [PATCH 0/6] ARM: l2x0: kexex, cleanup and optimisation   Linus Walleij
• [PATCH 2/2] ARM: S3C64XX: Prototype SPI devices   Kukjin Kim
• [PATCH 2/2] ARM: S3C64XX: Prototype SPI devices   Mark Brown
• [PATCH 1/2] plat-nomadik: MTU timer trivial bug fix   Jonas Aaberg
• [PATCH 2/2] plat-nomadik: MTU: Change prescaler limit and comment updates   Jonas Aaberg
• [PATCH v3] i2c: QUP based bus driver for Qualcomm MSM chipsets   Trilok Soni
• [PATCH] ARM: Update RealView SMP defconfig   Linus Walleij
• [PATCH 1/4] ARM: pxa168fb: fix clear operation   Haojian Zhuang
• [PATCH 2/4] ARM: pxa: append tavorevb3 support   Haojian Zhuang
• [PATCH 3/4] ARM: pxa: update cpuid of pxa168 & pxa910   Haojian Zhuang
• [PATCH 4/4] ARM: mmp: support sparse irq   Haojian Zhuang
• [PATCH 1/5] mfd: add codec resource into 88pm860x driver   Haojian Zhuang
• [PATCH 2/5] leds: remove auto blink in 88pm860x   Haojian Zhuang
• [PATCH 3/5] mfd: update chip id of 88pm8607   Haojian Zhuang
• [PATCH 4/5] input: monitor both onkey up and down event   Haojian Zhuang
• [PATCH 5/5] mfd: fix max8925 irq control bit incorrect setting   Haojian Zhuang
• [PATCH 2/2] ARM: mxc: turn off HWCAP_NEON for older versions of imx51 silicon   Sergei Shtylyov
• [PATCH 1/2] ARM: S3C64XX: Fix dev-spi build   Jassi Brar
• [00/12] DMAENGINE: PL08X driver updates   Linus Walleij
• [PATCH 3/3] ARM: vexpress: add support for CPU hotplug to ct-ca9x4 tile   Russell King - ARM Linux
• [RFC PATCH 0/3] Convert RealView/Versatile platforms tophysmap-flash   Catalin Marinas
• [PATCH 0/6] ARM: l2x0: kexex, cleanup and optimisation   Catalin Marinas
• [PATCH 0/6] ARM: l2x0: kexex, cleanup and optimisation   Shilimkar, Santosh
• [PATCH 48/74] GIC: Added dummy handlers for Power Management Suspend Resume   Russell King - ARM Linux
• [PATCH 0/6] ARM: l2x0: kexex, cleanup and optimisation   Catalin Marinas
• [PATCH 0/6] ARM: l2x0: kexex, cleanup and optimisation   Shilimkar, Santosh
• [PATCH 1/2 v3] msm: Install the Google-Android gpio driver.   Gregory Bean
• [PATCH 2/2 v3] msm: gpio: Add gpiomux calls to request and free.   Gregory Bean
• [PATCH 0/6] ARM: l2x0: kexex, cleanup and optimisation   Shilimkar, Santosh
• [PATCH 0/6] ARM: l2x0: kexex, cleanup and optimisation   Catalin Marinas
• [PATCH 1/3] ARM: pxa168: added support for Teton BGA platform   Marek Vasut
• [PATCH 3/3] ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337   Marek Vasut
• [PATCH 1/2] ARM: S3C64XX: Fix dev-spi build   Mark Brown
• [PATCH 1/2] OMAP2+: PM: initial runtime PM core support   Grant Likely
• [PATCH 2/2] OMAP1: PM: add simple runtime PM layer to manage clocks   Grant Likely
• [PATCH 3/3] ARM: vexpress: add support for CPU hotplug to ct-ca9x4 tile   Will Deacon
• [PATCH 3/3] ARM: vexpress: add support for CPU hotplug to ct-ca9x4 tile   Russell King - ARM Linux
• [PATCH] ARM: VExpress: Set bit 22 in the PL310 (cache controller) AuxCtlr register   Catalin Marinas
• [PATCH 1/2] OMAP2+: PM: initial runtime PM core support   Kevin Hilman
• [PATCH 1/2] OMAP2+: PM: initial runtime PM core support   Kevin Hilman
• [PATCH] OMAP: McBSP: tx_irq_completion used in rx_irq_handler   Scott Ellis
• [PATCH 1/2] OMAP2+: PM: initial runtime PM core support   Grant Likely
• [PATCH 1/2] OMAP2+: PM: initial runtime PM core support   Grant Likely
• [PATCH 2/2] ARM: mxc: turn off HWCAP_NEON for older versions of imx51 silicon   Nicolas Pitre
• [spi-devel-general] [PATCH] SPI: fix APB pclk power regression on U300   Grant Likely
• [PATCH] ARM: Don't try to send IPI on UP systems with CONFIG_SMP   Tony Lindgren
• [PATCH] bounce: call flush_dcache_page after bounce_copy_vec   Andrew Morton
• [PATCH] bounce: call flush_dcache_page after bounce_copy_vec   Jens Axboe
• [PATCH 1/6] ARM: Add inline function smp_on_up() for early init testing   Tony Lindgren
• [PATCH 4/5] [ARM] Auto calculate ZRELADDR and provide option for exceptions   Robert Schwebel
• [PATCH 3/3] ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337   Marek Vasut
• [PATCH 1/7] ARM: specify ZRELADDR for ARCH_TEGRA   Russell King - ARM Linux
• [PATCH] MMC: move regulator handling closer to core v3   Andrew Morton
• [PATCH 03/13] OMAP3: PM: move device-specific special cases from PM core into CPUidle   Kevin Hilman
• [PATCH 1/3] ARM: pxa168: added support for Teton BGA platform   Mark F. Brown
• Voltage/current/sensor monitoring interface and Wiegand   Stuart Longland
• [PATCH 1/4] ARM: S5PC110: add fimc clocks.   Kukjin Kim
• [PATCH 2/4] ARM: Samsung: s5p-fimc: fix dma coherent mask   Kukjin Kim
• [PATCH] bounce: call flush_dcache_page after bounce_copy_vec   Bryan Wu
• [PATCH 4/5] rtc: rtc-s3c: Fix on RTC initialization method   Kukjin Kim
• [PATCH 4/5] rtc: rtc-s3c: Fix on RTC initialization method   Kukjin Kim
• [PATCH 5/5] rtc: rtc-s3c: Fix debug message format on RTC   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Fix dev-spi build   Jassi Brar
• [PATCH 1/3] ARM: pxa168: added support for Teton BGA platform   Marek Vasut
• [PATCH 2/4] ARM: Samsung: s5p-fimc: fix dma coherent mask   Marek Szyprowski
• [PATCH] s3c-fb: Add support ld9040 amoled panel driver   Donghwa Lee
• [PATCH v2] ARM: Samsung: s5p-fimc: fix dma coherent mask   Marek Szyprowski
• [PATCH] ARM: Samsung: s5p-fimc: decrease IO registers memory region size   Marek Szyprowski
• Voltage/current/sensor monitoring interface and Wiegand   Ryan Mallon
• [PATCH 09/24] msm: MSM8X60 RUMI3 board support   Jeff Ohlstein
• No subject   tarek attia
• [PATCH 1/6] ARM: Add inline function smp_on_up() for early init testing   Bryan Wu
• [PATCH 48/74] GIC: Added dummy handlers for Power Management Suspend Resume   deepaksi
• [PATCH] SPI: move PL022 probe call to subsys_initcall()   Grant Likely
• Voltage/current/sensor monitoring interface and Wiegand   Stuart Longland
• [PATCH 0/6] ARM: l2x0: kexex, cleanup and optimisation   Shilimkar, Santosh
• [PATCH 5/6] spi-imx: Add i.MX51 support   Grant Likely
• [PATCH] MMC: move regulator handling closer to core v3   Adrian Hunter
• [PATCH] OMAP: McBSP: tx_irq_completion used in rx_irq_handler   Eero Nurkkala
• [PATCH] OMAP: McBSP: tx_irq_completion used in rx_irq_handler   Jarkko Nikula
• [PATCH] s3c-fb: Add support ld9040 amoled panel driver   Marek Szyprowski
• [PATCH] MMC: move regulator handling closer to core v3   Linus Walleij
• [PATCH 1/7] ARM: specify ZRELADDR for ARCH_TEGRA   Uwe Kleine-König
• [PATCH 5/6] spi-imx: Add i.MX51 support   Uwe Kleine-König
• [PATCH 1/3] ARM: pxa168: added support for Teton BGA platform   Eric Miao
• [PATCH] MMC: move regulator handling closer to core v4   Linus Walleij
• [PATCH] SPI: move PL022 probe call to subsys_initcall()   Linus Walleij
• [PATCH v2] Input: Make ADS7846 independent on regulator   Marek Vasut
• Voltage/current/sensor monitoring interface and Wiegand   Mark Brown
• [PATCH 1/5] ARM: omap/fb: move omap_init_fb to .init.text   Tomi Valkeinen
• [PATCH 8/9] esdhc-4 esdhc: fsl esdhc driver based on platform sdhci api   Zhu Richard-R65037
• [PATCH] MMC: move regulator handling closer to core v3   Mark Brown
• [PATCH v2] Input: Make ADS7846 independent on regulator   Mark Brown
• [PATCH V3] arm & sh: factorised duplicated clkdev.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: S3C64XX: Fix dev-spi build   Kukjin Kim
• [PATCH 2/2] ARM: S3C64XX: Prototype SPI devices   Kukjin Kim
• [PATCH v2] ARM: Samsung: s5p-fimc: fix dma coherent mask   Kukjin Kim
• [PATCH] ARM: Samsung: s5p-fimc: decrease IO registers memory region size   Kukjin Kim
• [PATCH 1/3] ux500: add DB5500 pins   Rabin Vincent
• [PATCH 2/3] ux500: rename DB8500 DMA event line macros   Rabin Vincent
• [PATCH 3/3] ux500: add DB5500 DMA event lines   Rabin Vincent
• [PATCH 2/2] ARM: S3C64XX: Prototype SPI devices   Mark Brown
• [PATCH 1/2] ARM: S3C64XX: Fix dev-spi build   Mark Brown
• Voltage/current/sensor monitoring interface and Wiegand   Jonathan Cameron
• [PATCH] MMC: move regulator handling closer to core v3   Adrian Hunter
• [PATCH] MMC: move regulator handling closer to core v3   Mark Brown
• [PATCH/RFC] ARM: CONFIG_MTD_XIP vs. __aeabi_idiv   Johannes Stezenbach
• [PATCH 1/6] pxa3xx_nand: make scan procedure more clear   Eric Miao
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to, from}_user?   Wolfgang Wegner
• [PATCH 8/9] esdhc-4 esdhc: fsl esdhc driver based on platform sdhci api   Wolfram Sang
• [PATCH 1/7] ARM: specify ZRELADDR for ARCH_TEGRA   Erik Gilling
• [PATCH 1/3] ARM: pxa168: added support for Teton BGA platform   Marek Vasut
• [PATCH v3] i2c: QUP based bus driver for Qualcomm MSM chipsets   Sundar
• [GIT PULL] generic arm MSM changes for v2.6.37   Daniel Walker
• [PATCH 1/4] arm: Kconfig option for ARCH_MSM_SCORPIONMP   Daniel Walker
• [PATCH 2/4] arm: dis-allow hotplug on MSM   Daniel Walker
• [PATCH 3/4] arm: mm: add proc info for ARM11MPCore/Cortex-A9 from ARM   Daniel Walker
• [PATCH 4/4] GIC: Dont disable INT in ack callback   Daniel Walker
• [PATCH] MMCI: use _cansleep GPIO functions   Linus Walleij
• [PATCH] ux500: use _cansleep GPIO functions   Linus Walleij
• [PATCH v3] i2c: QUP based bus driver for Qualcomm MSM chipsets   Kenneth Heitke
• [PATCH V8] mmc : Add i.MX21 support to mxcmmc driver   Martin Fuzzey
• Voltage/current/sensor monitoring interface and Wiegand   Stuart Longland
• [PATCH V2] drivers: lcd: Add support ld9040 amoled panel driver   Donghwa Lee
• [RFC,PATCH 1/2] Add a common struct clk   Jeremy Kerr
• [PATCH 27/74] ST SPEAr : NAND interface driver for spear platforms   viresh kumar
• [PATCH] OMAP: McBSP: tx_irq_completion used in rx_irq_handler   Peter Ujfalusi
• Voltage/current/sensor monitoring interface and Wiegand   Dmitry Torokhov
• [PATCH] ARM: S5PC110: Samsung Goni board update   Marek Szyprowski
• [PATCH 1/6] ARM: S5PC110: update framebuffer setup information for Goni   Marek Szyprowski
• [PATCH 2/6] ARM: S5PC110: add support for S6E63M0 LCD controller on Goni board   Marek Szyprowski
• [PATCH 3/6] ARM: S5PC110: Add si470x radio device to the GONI board   Marek Szyprowski
• [PATCH 4/6] ARM: S5PV210: Enable USB HSOTG gadget build   Marek Szyprowski
• [PATCH 5/6] ARM: S5PC110: add support for otg usb gadget on Goni board   Marek Szyprowski
• [PATCH 6/6] ARM: S5PC110: add support for MMC regulators on Goni board   Marek Szyprowski
• [PATCH 43/74] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Vipin Kumar
• [PATCH 27/74] ST SPEAr : NAND interface driver for spear platforms   Linus Walleij
• [PATCH 8/9] esdhc-4 esdhc: fsl esdhc driver based on platform sdhci api   Zhu Richard-R65037
• [PATCH 43/74] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Jean-Christophe PLAGNIOL-VILLARD
• [rtc-linux] RE: [PATCH 5/5] rtc: rtc-s3c: Fix debug message format on RTC   Wan ZongShun
• [PATCH 43/74] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Vipin Kumar
• [PATCH 43/74] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] AT91: at91sam9261ek board: remove warnings related to use of SPI or SD/MMC   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] AT91: dm9000 initialization update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] ARM: S5PC110: add support for MMC regulators on Goni board   Mark Brown
• [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions   Uwe Kleine-König
• [PATCH 1/6] ARM: S5PC110: update framebuffer setup information for Goni   Kukjin Kim
• [PATCH] AT91: dm9000 initialization update   Nicolas Ferre
• [PATCH 6/6] ARM: S5PC110: add support for MMC regulators on Goni board   Kukjin Kim
• [PATCH 3/6] ARM: S5PC110: Add si470x radio device to the GONI board   Kukjin Kim
• [PATCH 6/6] ARM: S5PC110: add support for MMC regulators on Goni board   Mark Brown
• [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions   Lothar Waßmann
• [PATCH] MMC: move regulator handling closer to core v3   Adrian Hunter
• [PATCH] AT91: dm9000 initialization update   Nicolas Ferre
• [PATCH] AT91: at91sam9261ek board: remove warnings related to use of SPI or SD/MMC   Nicolas Ferre
• [PATCH 1/4] arm: Kconfig option for ARCH_MSM_SCORPIONMP   Sergei Shtylyov
• [PATCH] AT91: dm9000 initialization update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] AT91: dm9000 initialization update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] AT91: at91sam9261ek board: remove warnings related to use of SPI or SD/MMC   Sergei Shtylyov
• [PATCH 4/6] ARM: S5PV210: Enable USB HSOTG gadget build   Kukjin Kim
• [PATCH] MMC: move regulator handling closer to core v3   Mark Brown
• [PATCH 5/6] ARM: S5PC110: add support for otg usb gadget on Goni board   Kukjin Kim
• [PATCH] AT91: at91sam9261ek board: remove warnings related to use of SPI or SD/MMC   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] AT91: at91sam9261ek board: remove warnings related to use of SPI or SD/MMC   Nicolas Ferre
• [PATCH] mmc: failure of block read wait for long time   Ghorai, Sukumar
• [rtc-linux] RE: [PATCH 5/5] rtc: rtc-s3c: Fix debug message format on RTC   Kukjin Kim
• [PATCH] mmc: failure of block read wait for long time   Adrian Hunter
• [PATCH] mmc: failure of block read wait for long time   Ghorai, Sukumar
• [PATCH 4/6] ARM: S5PC100: Move external interrupt defines   Kukjin Kim
• [PATCH 0/2] ARM: Update number of VIC   Kukjin Kim
• [PATCH 1/2] ARM: Update number of VIC for S5PV210   Kukjin Kim
• [PATCH 2/2] ARM: Update number of VIC for S5P6442 and S5PC100   Kukjin Kim
• [PATCH] ARM: Update number of VIC   Kukjin Kim
• [PATCH] AT91: at91sam9261ek: remove C99 comments but keep information   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] AT91: at91sam9261ek: remove C99 comments but keep information   Nicolas Ferre
• [GIT PULL]   Nicolas Ferre
• [PATCH] mmc: failure of block read wait for long time   Adrian Hunter
• [GIT PULL]   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] arm: Kconfig option for ARCH_MSM_SCORPIONMP   Uwe Kleine-König
• [PATCH 1/4] arm: Kconfig option for ARCH_MSM_SCORPIONMP   Daniel Walker
• [PATCH 1/4] arm: Kconfig option for ARCH_MSM_SCORPIONMP   Lorenzo Pieralisi
• [PATCH] ARM: make TCM allocation static and common for all archs   Jean-Christophe PLAGNIOL-VILLARD
• amba_pl022 spi->mode fix/cleanup patches   wellsk40 at gmail.com
• [PATCH 1/5] mfd/ab8500: Setup SPI transfer for 24 bits   wellsk40 at gmail.com
• [PATCH 2/5] ARM: LPC32XX: Add missing SPI mode and remove unused fields   wellsk40 at gmail.com
• [PATCH 3/5] ARM: U300: spi->mode and spi_bits_per_words updates   wellsk40 at gmail.com
• [PATCH 4/5] ARM: Ux500: Change SPI mode and remove unused fields   wellsk40 at gmail.com
• [PATCH 5/5] spi: amba_pl022: Remove unused fields from pl022_config_chip   wellsk40 at gmail.com
• [PATCH] ARM: make TCM allocation static and common for all archs   Linus Walleij
• [PATCH 1/4] arm: Kconfig option for ARCH_MSM_SCORPIONMP   Russell King - ARM Linux
• [PATCH 1/4] arm: Kconfig option for ARCH_MSM_SCORPIONMP   Daniel Walker
• [PATCH 1/2 v4] msm: add gpio driver for single-core SoCs.   Gregory Bean
• [PATCH 2/2 v4] msm: gpio: Add gpiomux calls to request and free.   Gregory Bean
• i.MX35 gpio troubles   H Hartley Sweeten
• resend: [PATCH] amba_pl022: Setup SPI configuration based on spi->mode   Kevin Wells
• [rtc-linux] RE: [PATCH 5/5] rtc: rtc-s3c: Fix debug message format on RTC   Andrew Morton
• [rtc-linux] RE: [PATCH 5/5] rtc: rtc-s3c: Fix debug message format on RTC   Kukjin Kim
• [PATCH 2/2] ARM: Update number of VIC for S5P6442 and S5PC100   Kukjin Kim
• [PATCH 0/3] ARM: S5PC210: Use the CPU common L2 cache configuration   Kyungmin Park
• [PATCH 1/3] ARM: L2X0: Add prefetch offset   Kyungmin Park
• [PATCH 2/3] ARM: S5PC210: Remove L2 cache init at board file   Kyungmin Park
• [PATCH 3/3] ARM: S5PC210: Set the common L2 cache configurations   Kyungmin Park
• [PATCH] MMCI: use _cansleep GPIO functions   Rabin Vincent
• [PATCH 4/6] ARM: S5PV210: Enable USB HSOTG gadget build   Kyungmin Park
• [PATCH 1/4] arm: Kconfig option for ARCH_MSM_SCORPIONMP   Sergei Shtylyov
• [PATCH 3/3] ARM: S5PC210: Set the common L2 cache configurations   Sergei Shtylyov
• [PATCH] MMCI: use _cansleep GPIO functions   Linus Walleij
• [PATCH] MMCI: use _cansleep GPIO functions   Linus Walleij
• [PATCH] MMCI: use _cansleep GPIO functions   Russell King - ARM Linux
• [PATCH] MMCI: use _cansleep GPIO functions   Linus Walleij
• [PATCH] MMCI: use _cansleep GPIO functions   Russell King - ARM Linux
• Importing RPC server bundle   David Lanzendörfer
• mv643xx_eth and MDIO bus PM resume   Simon Guinot
• [PATCH] MMCI: use _cansleep GPIO functions   Sergei Shtylyov
• [PATCH] MMCI: use _cansleep GPIO functions   Sergei Shtylyov
• [PATCH v2 4/5] h1940: Fix backlight and LCD power functions   Vasily Khoruzhick
• [PATCH v2 5/5] h1940: add UDA1380 to i2c devices list   Vasily Khoruzhick
• [PATCH 00/11] treewide: Remove pr_<level> uses with KERN_<level>   Joe Perches
• [PATCH 01/11] arch/arm: Remove pr_<level> uses of KERN_<level>   Joe Perches
• mv643xx_eth and MDIO bus PM resume   saeed bishara
• [PATCH v2] AT91: Add flexibity board support   Maxim Osipov
• [PATCH] AT91: Add flexibity board support   Maxim Osipov
• [PATCH] ARM: supply _cansleep gpio function to U300   Linus Walleij
• [PATCH] ARM: Update number of VIC   Maurus Cuelenaere
• mv643xx_eth and MDIO bus PM resume   Simon Guinot
• Regression on UP ARM from commit e18d65f0500b95d8724b17d8ea9f1116cf390bbe   Linus Walleij
• [PATCH 1/4] phylib: fix PAL state machine restart on resume   Simon Guinot
• [PATCH 1/2] MTD: generic FSMC NAND MTD driver   Linus Walleij
• [PATCH 2/2] ARM: platform data to use the FSMC NAND with the U300   Linus Walleij
• Voltage/current/sensor monitoring interface and Wiegand   Stuart Longland
• [PATCH] ARM: S5PV210: Add audio support to Goni and Aquila board   Chanwoo Choi
• [PATCH 03/74] ST SPEAr: Formalized timer support   Shiraz Hashim
• [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions   Jason Wang
• [PATCH 03/74] ST SPEAr: Formalized timer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 0/3] ARM: pxa168: Added Teton BGA Board Support   Mark F. Brown
• [PATCH v2 1/3] ARM: pxa168: added support for Teton BGA platform   Mark F. Brown
• [PATCH v2 2/3] ARM: pxa168/teton bga: added keypad support   Mark F. Brown
• [PATCH v2 3/3] ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337   Mark F. Brown
• [PATCH 03/74] ST SPEAr: Formalized timer support   Shiraz Hashim
• [PATCH 03/74] ST SPEAr: Formalized timer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 3/3] ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337   Haojian Zhuang
• [PATCH 1/2] ARM: remove NR_IRQS in gic.c   Haojian Zhuang
• [PATCH 2/2] ARM: update HARDIRQ_BITS   Haojian Zhuang
• Regression on UP ARM from commit e18d65f0500b95d8724b17d8ea9f1116cf390bbe   Baruch Siach
• [PATCH V3 0/6] Generalise ARM perf-events backend for oprofile   Matt Fleming
• [PATCH 1/6] perf: Add helper function to return number of counters   Matt Fleming
• [PATCH 2/6] ARM: oprofile: Rename op_arm to oprofile_perf   Matt Fleming
• [PATCH 3/6] ARM: oprofile: Move non-ARM code into separate init/exit functions   Matt Fleming
• [PATCH 4/6] oprofile: Abstract the perf-events backend   Matt Fleming
• [PATCH 5/6] ARM: Make oprofile depend on CONFIG_HW_PERF_EVENTS   Matt Fleming
• [PATCH 6/6] sh: oprofile: Use perf-events oprofile backend   Matt Fleming
• [PATCH V3 0/6] Generalise ARM perf-events backend for oprofile   Marc Titinger
• [PATCH 1/4] ARM: pxa168fb: fix clear operation   Eric Miao
• Maximum bootable kernel size in current ARM linux   Bruce M. Penrod
• [PATCH v2 3/3] ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337   Marek Vasut
• [PATCH 03/74] ST SPEAr: Formalized timer support   Russell King - ARM Linux
• [PATCH V3 0/6] Generalise ARM perf-events backend for oprofile   Matt Fleming
• [PATCH 5/6] ARM: Make oprofile depend on CONFIG_HW_PERF_EVENTS   Will Deacon
• Regression on UP ARM from commit e18d65f0500b95d8724b17d8ea9f1116cf390bbe   Mark Brown
• Maximum bootable kernel size in current ARM linux   Marek Vasut
• [PATCH V3 0/6] Generalise ARM perf-events backend for oprofile   Ingo Molnar
• [PATCH 5/6] ARM: Make oprofile depend on CONFIG_HW_PERF_EVENTS   Sergei Shtylyov
• Maximum bootable kernel size in current ARM linux   Haojian Zhuang
• Maximum bootable kernel size in current ARM linux   Russell King - ARM Linux
• [PATCH V3 0/6] Generalise ARM perf-events backend for oprofile   Will Deacon
• Maximum bootable kernel size in current ARM linux   Simon Guinot
• Maximum bootable kernel size in current ARM linux   Russell King - ARM Linux
• [PATCH v2] AT91: Add flexibity board support   Maxim Osipov
• mv643xx_eth and MDIO bus PM resume   saeed bishara
• [PATCH v2] AT91: Add flexibity board support   Marek Vasut
• [PATCH] ux500: add CPU hotplug support   Sundar Iyer
• [PATCH v2] AT91: Add flexibity board support   Maxim Osipov
• [PATCH v4] ux500: add ab8500-regulators machine specific data   Sundar Iyer
• [PATCH V3 0/6] Generalise ARM perf-events backend for oprofile   Matt Fleming
• [PATCH] ux500: add CPU hotplug support   Russell King - ARM Linux
• [PATCH v2] ux500: add CPU hotplug support   Sundar Iyer
• [PATCH V3 0/6] Generalise ARM perf-events backend for oprofile   Matt Fleming
• [PATCH 0/2] ARM: factorise CPU hotplug code   Sundar R IYER
• [PATCH] ux500: add CPU hotplug support   Catalin Marinas
• [PATCH 7/9] ARM: Improve the L2 cache performance when PL310 is used   Russell King - ARM Linux
• [PATCH v2] AT91: Add flexibity board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] ARM: Add SWP/SWPB emulation for ARMv7 processors (v5)   Russell King - ARM Linux
• [PATCH 1/6] pxa3xx_nand: make scan procedure more clear   Lei Wen
• [PATCH 7/9] ARM: Improve the L2 cache performance when PL310 is used   Catalin Marinas
• Maximum bootable kernel size in current ARM linux   Matthieu CASTET
• [PATCH 3/4] arm: mm: add proc info for ARM11MPCore/Cortex-A9 from ARM   Catalin Marinas
• ARM target not boot after remap memory   Mike Rapoport
• Regression on UP ARM from commit   Milan Svoboda
• Maximum bootable kernel size in current ARM linux   Russell King - ARM Linux
• ARM target not boot after remap memory   Russell King - ARM Linux
• Reg: Linux Porting   Marek Vasut
• [PATCH v2] AT91: Add flexibity board support   Marek Vasut
• ARM target not boot after remap memory   Russell King - ARM Linux
• [PATCH 5/5] spi: amba_pl022: Remove unused fields from pl022_config_chip   Linus Walleij
• [PATCH 3/5] mfd: update chip id of 88pm8607   Samuel Ortiz
• [PATCH 5/5] mfd: fix max8925 irq control bit incorrect setting   Samuel Ortiz
• Regression on UP ARM from commit e18d65f0500b95d8724b17d8ea9f1116cf390bbe   Christoph Lameter
• [PATCH 5/5] spi: amba_pl022: Remove unused fields from pl022_config_chip   Linus Walleij
• Remove unused default configurations   Vincent Sanders
• [PATCH 1/9] Remove unused default configuration   Vincent Sanders
• [PATCH 2/9] Remove unused default configuration   Vincent Sanders
• [PATCH 3/9] Remove unused default configuration   Vincent Sanders
• [PATCH 4/9] Remove unused n8x0 default configuration   Vincent Sanders
• [PATCH 5/9] Remove unused omap generic 2420 default configuration   Vincent Sanders
• [PATCH 6/9] Remove unused pxa3xx default configuration   Vincent Sanders
• [PATCH 7/9] Remove unused qil-a9260 default configuration   Vincent Sanders
• [PATCH 8/9] Remove unused usb-a9260 default configuration   Vincent Sanders
• [PATCH 9/9] Remove unused usb-a9263 default configuration   Vincent Sanders
• amba_pl022 spi->mode fix/cleanup patches   Linus Walleij
• [PATCH 1/2] ARM: remove NR_IRQS in gic.c   Eric Miao
• [PATCH 9/9] Remove unused usb-a9263 default configuration   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] Remove unused usb-a9263 default configuration   Thomas Petazzoni
• [PATCH 2/2] ARM: update HARDIRQ_BITS   Eric Miao
• [PATCH 9/9] Remove unused usb-a9263 default configuration   Vincent Sanders
• [PATCH 9/9] Remove unused usb-a9263 default configuration   Vincent Sanders
• [PATCH 2/4] ARM: pxa: append tavorevb3 support   Eric Miao
• Common warnings   Vincent Sanders
• resend: [PATCH] amba_pl022: Setup SPI configuration based on spi->mode   Kevin Wells
• amba_pl022 spi->mode fix/cleanup patches   Kevin Wells
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to, from}_user?   Leon Woestenberg
• Common warnings   Gadiyar, Anand
• Remove unused default configurations   Daniel Walker
• [PATCH -devel] arm: kconfig: enable SMP for MSM targets   Daniel Walker
• [PATCH 9/9] Remove unused usb-a9263 default configuration   avictor.za at gmail.com
• [PATCH 9/9] Remove unused usb-a9263 default configuration   Russell King - ARM Linux
• Maximum bootable kernel size in current ARM linux   Bruce M. Penrod
• [PATCH 00/25] treewide-next: Use static const char arrays   Joe Perches
• [PATCH 05/25] drivers/i2c: Use static const char arrays   Joe Perches
• [PATCH 05/25] drivers/i2c: Use static const char arrays   Russell King - ARM Linux
• [RFC] mmaping with VIVT cache   P F
• [GIT PULL] generic arm MSM changes for v2.6.37 -v2   Daniel Walker
• [PATCH 05/25] drivers/i2c: Use static const char arrays   Jonathan Cameron
• [PATCH 05/25] drivers/i2c: Use static const char arrays   Joe Perches
• [PATCH v2] AT91: Add flexibity board support   Ryan Mallon
• [PATCH v4] i2c: QUP based bus driver for Qualcomm MSM chipsets   Kenneth Heitke
• Common warnings   Jean-Christophe PLAGNIOL-VILLARD
• Common warnings   Ryan Mallon
• [PATCH V8] mmc : Add i.MX21 support to mxcmmc driver   Chris Ball
• [PATCH v2] ARM: uaccess: Implement strict user copy checks   Stephen Boyd
• [PATCH 1/4] phylib: fix PAL state machine restart on resume   David Miller
• [PATCH] mmc: failure of block read wait for long time   Ghorai, Sukumar
• [PATCH/RFC] ARM: add a vma entry for the user accessible vector page   Nicolas Pitre
• [PATCH 3/4] ARM: pxa: update cpuid of pxa168 & pxa910   Eric Miao
• [PATCH 3/4] arm: remove cast from void*   matt mooney
• [PATCH 1/6] ARM: S5PC110: update framebuffer setup information for Goni   Marek Szyprowski
• [PATCH 3/6] ARM: S5PC110: Add si470x radio device to the GONI board   Marek Szyprowski
• [PATCH 5/6] ARM: S5PC110: add support for otg usb gadget on Goni board   Marek Szyprowski
• Regression on UP ARM from commit e18d65f0500b95d8724b17d8ea9f1116cf390bbe   Pekka Enberg
• [PATCH v2] AT91: Add flexibity board support   Maxim Osipov
• [PATCH 3/4] arm: remove cast from void*   Hiroshi DOYU
• [PATCH 6/9] Remove unused pxa3xx default configuration   Haojian Zhuang
• [PATCH 1/1] ARM: pxa: fix NFS build issue   Haojian Zhuang
• [PATCH 4/4] ARM: mmp: support sparse irq   Eric Miao
• [PATCH 1/1] ARM: pxa: fix NFS build issue   Eric Miao
• [PATCH 6/9] Remove unused pxa3xx default configuration   Eric Miao
• [PATCH v2] AT91: Add flexibity board support   Jean-Christophe PLAGNIOL-VILLARD
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to, from}_user?   Wolfgang Wegner
• [PATCH v2 1/3] ARM: pxa168: added support for Teton BGA platform   Eric Miao
• [PATCH v2 2/3] ARM: pxa168/teton bga: added keypad support   Eric Miao
• [PATCH v2 3/3] ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337   Eric Miao
• Remove unused default configurations   Eric Miao
• [PATCH 05/25] drivers/i2c: Use static const char arrays   Lothar Waßmann
• [PATCH 01/11] arch/arm: Remove pr_<level> uses of KERN_<level>   Eric Miao
• gadget pxa25x_udc g_serial stall problem   Igor Grinberg
• dove: fix __io() definition to use bus based offset   Saeed Bishara
• [PATCH v3] AT91: Add flexibity board support   Maxim Osipov
• [PATCH V3] arm & sh: factorised duplicated clkdev.c   Paul Mundt
• [PATCH v4] ux500: add ab8500-regulators machine specific data   Mark Brown
• [PATCH 2/7] [RFC] ARM: shmobile: remove unneeded hack to calculate zreladdr   Paul Mundt
• ARM: dove: fix __io() definition to use bus based offset   Eric Miao
• [GIT PULL] pxa fixes for 2.6.36-rc4   Eric Miao
• [PATCH v2] ARM: uaccess: Implement strict user copy checks   Heiko Carstens
• [PATCH 3/5] DMA: reduce the number of memory allocations   Paul Mundt
• [PATCH 1/2] MTD: generic FSMC NAND MTD driver   Linus Walleij
• [PATCH] ux500: rework device registration   Rabin Vincent
• [PATCH v2] ARM: Samsung: s5p-fimc: fix dma coherent mask   Marek Szyprowski
• [PATCH 3/3] ARM: S5PC210: Set the common L2 cache configurations   Kukjin Kim
• [PATCH 3/3] ARM: S5PC210: Set the common L2 cache configurations   Kyungmin Park
• [PATCH 1/1] ARM: pxa: fix NFS build issue   Uwe Kleine-König
• [PATCH 2/7] [RFC] ARM: shmobile: remove unneeded hack to calculate zreladdr   Uwe Kleine-König
• Maximum bootable kernel size in current ARM linux   Dave P. Martin
• Maximum bootable kernel size in current ARM linux   Catalin Marinas
• [PATCH 05/25] drivers/i2c: Use static const char arrays   Jonathan Cameron
• [PATCH v2] ARM: uaccess: Implement strict user copy checks   Arnd Bergmann
• [PATCH 9/9] ARM: Add SWP/SWPB emulation for ARMv7 processors (v5)   Leif Lindholm
• [PATCH 2/9] Remove unused default configuration   Uwe Kleine-König
• [PATCH v2] ARM: uaccess: Implement strict user copy checks   Heiko Carstens
• resend: [PATCH] amba_pl022: Setup SPI configuration based on spi->mode   Linus Walleij
• Maximum bootable kernel size in current ARM linux   Nicolas Pitre
• Maximum bootable kernel size in current ARM linux   Nicolas Pitre
• Maximum bootable kernel size in current ARM linux   Bruce M. Penrod
• Maximum bootable kernel size in current ARM linux   Nicolas Pitre
• [PATCH] ARM: Handle __flush_icache_all for CONFIG_SMP_ON_UP   Tony Lindgren
• [PATCH] omap: Update omap3_defconfig to work with SMP_ON_UP   Tony Lindgren
• [PATCH] omap: Update omap3_defconfig for omap2   Tony Lindgren
• [PATCH] omap: Update omap3_defconfig to work with SMP_ON_UP   Shilimkar, Santosh
• [PATCH 05/25] drivers/i2c: Use static const char arrays   Russell King - ARM Linux
• [PATCH] omap: Update omap3_defconfig to work with SMP_ON_UP   Tony Lindgren
• [PATCH v2] AT91: Add flexibity board support   Ryan Mallon
• Importing RPC server bundle   Daniel Walker
• [PATCH] arm: fix pci_set_consistent_dma_mask for dmabounce devices   Krzysztof Halasa
• [PATCH v4] i2c: QUP based bus driver for Qualcomm MSM chipsets   Ben Dooks
• [PATCH 05/25] drivers/i2c: Use static const char arrays   Ben Dooks
• [RFC] mmaping with VIVT cache   Russell King - ARM Linux
• [RFC] mmaping with VIVT cache   Eric Miao
• [PATCH] ARM: plug a race with the alignment trap handler   Nicolas Pitre
• [PATCH 0/3] Common struct clk implementation, v7   Jeremy Kerr
• [PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [PATCH 2/3] clk: Generic support for fixed-rate clocks   Jeremy Kerr
• [PATCH 3/3] arm/clkdev: Allow common struct clk usage   Jeremy Kerr
• [PATCH V3] arm & sh: factorised duplicated clkdev.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] Common struct clk implementation, v7   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] Common struct clk implementation, v7   Jeremy Kerr
• [PATCH] omap: Update omap3_defconfig to work with SMP_ON_UP   Shilimkar, Santosh
• [PATCH] support for Seagate DockStar   Thomas Weber
• [PATCH 3/5] DMA: reduce the number of memory allocations   Guennadi Liakhovetski
• [PATCH 4/5] DMA: Add functions to preallocate DMA memory dor devices   Uwe Kleine-König
• [RFC] mmaping with VIVT cache   Russell King - ARM Linux
• [RFC] mmaping with VIVT cache   Eric Miao
• [PATCH 0/5] ARM: S5PV210: Add support CPUFREQ for S5PV210/S5PC110   Jaecheol Lee
• [PATCH 1/5] ARM: S5PV210: Add support DMC map_desc table   Jaecheol Lee
• [PATCH 2/5] ARM: S5PV210: Add struct clk_ops for clk_fout_apll   Jaecheol Lee
• [PATCH 3/5] ARM: S5PV210: Add Register definition for CMU   Jaecheol Lee
• [PATCH 4/5] ARM: S5PV210: Add support CPUFREQ   Jaecheol Lee
• [PATCH 5/5] ARM: S5PV210: Update Kconfig and Makefile for supporting CPUFREQ driver   Jaecheol Lee
• [PATCH v5 3/7] wireless: wl12xx: add platform data passing support   Ohad Ben-Cohen
• [PATCH 0/3] Common struct clk implementation, v7   Paulius Zaleckas
• [PATCH v5 3/7] wireless: wl12xx: add platform data passing support   Russell King - ARM Linux
• [PATCH v5 3/7] wireless: wl12xx: add platform data passing support   Vitaly Wool
• [PATCH v3] ARM: S5PV210: Add Power Management Support   Sangbeom Kim
• [PATCH v5] ux500: add ab8500-regulators machine specific data   Sundar Iyer
• [PATCH v5] ux500: add ab8500-regulators machine specific data   Mark Brown
• [PATCH v5 0/7] native wl1271 support on ZOOM   Ohad Ben-Cohen
• [PATCH v5 0/7] native wl1271 support on ZOOM   Vitaly Wool
• [PATCH v5 0/7] native wl1271 support on ZOOM   John W. Linville
• [PATCH v2] support for Seagate DockStar   Eric Cooper
• i.mx25 :trouble with serial flow hardware   Olivier Barthel
• [PATCH v5 3/7] wireless: wl12xx: add platform data passing support   Michał Mirosław
• [PATCH] omap: Update omap3_defconfig to work with SMP_ON_UP   Tony Lindgren
• [PATCH v5 0/7] native wl1271 support on ZOOM   Tony Lindgren
• [PATCH v5 3/7] wireless: wl12xx: add platform data passing support   Tony Lindgren
• [PATCH v5 0/7] native wl1271 support on ZOOM   Ohad Ben-Cohen
• [PATCH] omap: Update and rename common defconfig for omap2plus dev=   Santosh Shilimkar
• [PATCH] omap: Update omap3_defconfig to work with SMP_ON_UP   Shilimkar, Santosh
• [PATCH] s3c-fb: fix spinlock lockup   Jing Liu
• Maximum bootable kernel size in current ARM linux   Bruce M. Penrod
• [PATCH 0/4] OMAP OPP layer for 2.6.37   Kevin Hilman
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Kevin Hilman
• [PATCH 2/4] OMAP: OPP: twl/tps: Introduce TWL/TPS-specific code   Kevin Hilman
• [PATCH 3/4] OMAP3: remove OPP interfaces from OMAP PM layer   Kevin Hilman
• [PATCH 4/4] OMAP3: OPP: add OPP table data and initialization   Kevin Hilman
• Maximum bootable kernel size in current ARM linux   Alexander Clouter
• Maximum bootable kernel size in current ARM linux   Nicolas Pitre
• PrimeCell Generic DMA v11   Linus Walleij
• [PATCH 1/7] ARM: add PrimeCell generic DMA to PL022 v11   Linus Walleij
• [PATCH 2/7] ARM: add PrimeCell generic DMA to PL011 v11   Linus Walleij
• [PATCH 3/7] ARM: add PrimeCell generic DMA to MMCI/PL180 v11   Linus Walleij
• [PATCH 4/7] ARM: config U300 PL180 PL011 PL022 for DMA v11   Linus Walleij
• [PATCH 5/7] ARM: config Ux500 PL011 PL022 PL180 for DMA v11   Linus Walleij
• [PATCH 6/7] ARM: config RealViews PL011 PL022 for DMA v11   Linus Walleij
• [PATCH 7/7] ARM: config Versatiles PL011 PL022 for DMA v11   Linus Walleij
• [PATCH] omap: Update omap3_defconfig to work with SMP_ON_UP   Tony Lindgren
• [PATCH 0/3] Common struct clk implementation, v7   Colin Cross
• [PATCH v6 0/7] native wl1271 support on ZOOM   Ohad Ben-Cohen
• [PATCH v6 1/7] wl12xx: make wl12xx.h common to both spi and sdio   Ohad Ben-Cohen
• [PATCH v6 2/7] wl1271: propagate set_power's return value   Ohad Ben-Cohen
• [PATCH v6 3/7] wl12xx: add platform data passing support   Ohad Ben-Cohen
• [PATCH v6 4/7] wl1271: take irq info from private board data   Ohad Ben-Cohen
• [PATCH v6 5/7] wl1271: make ref_clock configurable by board   Ohad Ben-Cohen
• [PATCH v6 6/7] omap: zoom: add fixed regulator device for wlan   Ohad Ben-Cohen
• [PATCH v6 7/7] omap: zoom: add mmc3/wl1271 device support   Ohad Ben-Cohen
• Kirkwood PCI(e) write performance and DMA engine support for copy_{to, from}_user?   Leon Woestenberg
• [PATCH v2] ARM: Samsung: s5p-fimc: fix dma coherent mask   Kukjin Kim
• [PATCH 00/10] OMAP: misc PM queue for 2.6.37   Kevin Hilman
• [PATCH 01/10] OMAP3: PM: whitespace cleanup around IO wakeup enable   Kevin Hilman
• [PATCH 02/10] OMAP: PM debugfs removing OMAP3 hardcodings.   Kevin Hilman
• [PATCH 03/10] OMAP3: PM: move device-specific special cases from PM core into CPUidle   Kevin Hilman
• [PATCH 04/10] OMAP4: pm.c extensions for OMAP4 support   Kevin Hilman
• [PATCH 05/10] omap: pm-debug: Move common debug code to pm-debug.c   Kevin Hilman
• [PATCH 06/10] omap: pm-debug: Enable wakeup_timer_milliseconds debugfs entry   Kevin Hilman
• [PATCH 07/10] omap: pm: Move set_pwrdm_state routine to common pm.c   Kevin Hilman
• [PATCH 08/10] OMAP clockdomain: initialize clockdomain registers when the clockdomain layer starts   Kevin Hilman
• [PATCH 09/10] Revert "OMAP: omap_device: add omap_device_is_valid()"   Kevin Hilman
• [PATCH 10/10] OMAP: omap_device: make all devices a child of a new parent device   Kevin Hilman
• [PATCH v2 0/2] OMAP: runtime PM core for 2.6.37   Kevin Hilman
• [PATCH v2 1/2] OMAP2+: PM: initial runtime PM core support   Kevin Hilman
• [PATCH v2 2/2] OMAP1: PM: add simple runtime PM layer to manage clocks   Kevin Hilman
• [PATCH v3] ARM: S5PV210: Add Power Management Support   Kyungmin Park
• [PATCH 3/6] omap4: l2x0: Override the default l2x0_disable   Tony Lindgren
• [RFC] mmaping with VIVT cache   P F
• [PATCH 0/5] ARM: S5PV210: Add support CPUFREQ for S5PV210/S5PC110   Kyungmin Park
• [PATCH 4/5] ARM: S5PV210: Add support CPUFREQ   MyungJoo Ham
• [PATCH 0/3] Common struct clk implementation, v7   Paul Mundt
• [PATCH 1/7] ARM: add PrimeCell generic DMA to PL022 v11   Grant Likely
• [PATCH 01/11] ARM: pxa: Prepare pxa2xx pcmcia for pxa320   Marek Vasut
• [PATCH 02/11] ARM: pxa: Toradex Colibri PXA270 CF support   Marek Vasut
• [PATCH 03/11] ARM: pxa: Push Colibri evalboard MFP into module files   Marek Vasut
• [PATCH 04/11] ARM: pxa: Add M41T00 RTC support into Colibri evalboard   Marek Vasut
• [PATCH 05/11] ARM: pxa: Rename Colibri evalboard   Marek Vasut
• [PATCH 06/11] ARM: pxa: Colibri PXA320 PCMCIA driver   Marek Vasut
• [PATCH 07/11] ARM: pxa: Modularize Palm Tungsten|C   Marek Vasut
• [PATCH 08/11] UCB1400: Pass ucb1400-gpio data through ac97 bus   Marek Vasut
• [PATCH 09/11] ARM: pxa: Correct touch IRQ passing to UCB1400 on vpac270   Marek Vasut
• [PATCH 10/11] ARM: pxa: Pass GPIO offset to ucb1400-gpio on PalmTC   Marek Vasut
• [PATCH 11/11] ARM: pxa: Add gpio-leds and vibrator support to PalmTC   Marek Vasut
• [PATCH 3/5] DMA: reduce the number of memory allocations   FUJITA Tomonori
• amba_pl022 spi->mode fix/cleanup patches   Grant Likely
• [PATCH 3/5] DMA: reduce the number of memory allocations   Paul Mundt
• [PATCH 3/6] omap4: l2x0: Override the default l2x0_disable   Shilimkar, Santosh
• [PATCH 3/5] DMA: reduce the number of memory allocations   Russell King - ARM Linux
• [PATCH 3/5] DMA: reduce the number of memory allocations   FUJITA Tomonori
• [PATCH] ARM: New option for generating uncompressed uImage.   Jonas Aaberg
• [PATCH] ARM: New option for generating uncompressed uImage.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RESEND v4 0/4] nand prefetch-irq support and ecc layout chanage   Sukumar Ghorai
• [PATCH RESEND v4 1/4] omap3: nand: prefetch in irq mode support   Sukumar Ghorai
• [PATCH RESEND v4 2/4] omap3: nand: configurable fifo threshold to gain the throughput   Sukumar Ghorai
• [PATCH RESEND v4 3/4] omap: nand: ecc layout select from board file   Sukumar Ghorai
• [PATCH RESEND v4 4/4] omap: nand: making ecc layout as compatible with romcode ecc   Sukumar Ghorai
• [PATCH 0/3] Common struct clk implementation, v7   Jeremy Kerr
• [PATCH] ARM: remove legacy LEDS support from RealView and Versatile   Linus Walleij
• [PATCH 0/5] ARM: S5PV310: Add support HSMMC for S5PV310/S5PC210   Jeongbae Seo
• [PATCH 1/5] ARM: S5PV310: Add HSMMC support and SDHCI configuration   Jeongbae Seo
• [PATCH 2/5] ARM: S5PV310: Add HSMMC support into S5PV310 and S5PC210   Jeongbae Seo
• [PATCH 3/5] ARM: SAMSUNG: Modified to change of bus width and host caps   Jeongbae Seo
• [PATCH 4/5] ARM: SAMSUNG: Add clock types into platform data   Jeongbae Seo
• [PATCH 5/5] sdhci-s3c: Add support no internal clock divider in host controller   Jeongbae Seo
• [PATCH 0/5] Support for CompuLab CM-T3517 modules   Igor Grinberg
• [PATCH 1/5] omap3: Introduce CompuLab CM-T3517 module.   Igor Grinberg
• [PATCH 2/5] omap3: cm-t3517: add support for v3020 rtc.   Igor Grinberg
• [PATCH 3/5] omap3: cm-t3517: add support for usb host.   Igor Grinberg
• [PATCH 4/5] omap3: cm-t3517: add support for NAND flash   Igor Grinberg
• [PATCH 5/5] omap3: cm-t3517: add support for TI HECC   Igor Grinberg
• [PATCH 3/5] omap3: cm-t3517: add support for usb host.   Felipe Balbi
• [PATCH] ARM: remove legacy LEDS support from RealView and Versatile   Russell King - ARM Linux
• [PATCH] ARM: New option for generating uncompressed uImage.   Russell King - ARM Linux
• [PATCH 5/5] sdhci-s3c: Add support no internal clock divider in host controller   Kyungmin Park
• [PATCH 3/5] omap3: cm-t3517: add support for usb host.   Igor Grinberg
• [PATCH 1/5] ARM: S5PV310: Add HSMMC support and SDHCI configuration   Kyungmin Park
• [PATCH] ARM: New option for generating uncompressed uImage.   Jonas Aaberg
• [PATCH] ARM: New option for generating uncompressed uImage.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mmci: handle out-of-order IRQ events   Linus Walleij
• [PATCH v6 1/7] wl12xx: make wl12xx.h common to both spi and sdio   Teemu Paasikivi
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Gopinath, Thara
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Menon, Nishanth
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Gopinath, Thara
• [PATCH 2/4] OMAP: OPP: twl/tps: Introduce TWL/TPS-specific code   Gopinath, Thara
• [PATCH v6 1/7] wl12xx: make wl12xx.h common to both spi and sdio   Ohad Ben-Cohen
• [PATCH V8] mmc : Add i.MX21 support to mxcmmc driver   Sascha Hauer
• [PATCH v6 01/17] wl12xx: make wl12xx.h common to both spi and sdio   Ohad Ben-Cohen
• [PATCH v6 1/7] wl12xx: make wl12xx.h common to both spi and sdio   Ohad Ben-Cohen
• colibri-pxa320/AX88796: phy-read/write problems   Marc Kleine-Budde
• [PATCH 2/4] OMAP: OPP: twl/tps: Introduce TWL/TPS-specific code   Nishanth Menon
• [PATCH] ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LL   Maurus Cuelenaere
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Linus Walleij
• [PATCH 1/6] perf: Add helper function to return number of counters   Robert Richter
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Nishanth Menon
• [PATCH 2/6] ARM: oprofile: Rename op_arm to oprofile_perf   Robert Richter
• [PATCH 3/6] ARM: oprofile: Move non-ARM code into separate init/exit functions   Robert Richter
• [PATCH 1/3] Add a common struct clk   Jassi Brar
• [PATCH 4/6] oprofile: Abstract the perf-events backend   Robert Richter
• spi: amba_pl022: driver and platform spi->mode fixes   wellsk40 at gmail.com
• [PATCH] spi: amba_pl022: Add spi->mode support to AMBA SPI driver   wellsk40 at gmail.com
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Linus Walleij
• [PATCH 5/6] ARM: Make oprofile depend on CONFIG_HW_PERF_EVENTS   Robert Richter
• [PATCH 2/4] OMAP: OPP: twl/tps: Introduce TWL/TPS-specific code   Gopinath, Thara
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Roger Quadros
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Nishanth Menon
• [PATCH 2/4] OMAP: OPP: twl/tps: Introduce TWL/TPS-specific code   Nishanth Menon
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Roger Quadros
• [PATCH 6/6] sh: oprofile: Use perf-events oprofile backend   Robert Richter
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Nishanth Menon
• [PATCH V3 0/6] Generalise ARM perf-events backend for oprofile   Robert Richter
• [PATCH] OPP: remove OMAP specifics to make more generic   Kevin Hilman
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Kevin Hilman
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Nishanth Menon
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Kevin Hilman
• [PATCH 0/3] [ARM] tegra: PCI Express support   Mike Rapoport
• [PATCH 1/3] [ARM] tegra: add PCI Express clocks   Mike Rapoport
• [PATCH 2/3] [ARM] tegra: add PCI Express support   Mike Rapoport
• [PATCH 3/3] [ARM] tegra: harmony: enable PCI Express   Mike Rapoport
• [PATCH] ARM: Handle __flush_icache_all for CONFIG_SMP_ON_UP   Catalin Marinas
• [PATCH] ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile   Will Deacon
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Linus Walleij
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Nishanth Menon
• [PATCH 0/3] [ARM] tegra: PCI Express support   Arnd Bergmann
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Shilimkar, Santosh
• [PATCH 2/4] OMAP: OPP: twl/tps: Introduce TWL/TPS-specific code   Kevin Hilman
• Maximum bootable kernel size in current ARM linux   Catalin Marinas
• [PATCH] s3c: add support for mini6410   Darius Augulis
• [PATCH v6 6/7] omap: zoom: add fixed regulator device for wlan   Tony Lindgren
• [PATCH v6 7/7] omap: zoom: add mmc3/wl1271 device support   Tony Lindgren
• [PATCH 3/5] omap3: cm-t3517: add support for usb host.   Tony Lindgren
• Maximum bootable kernel size in current ARM linux   Russell King - ARM Linux
• [PATCH 1/5] omap3: Introduce CompuLab CM-T3517 module.   Tony Lindgren
• Maximum bootable kernel size in current ARM linux   Nicolas Pitre
• [PATCH 1/4] OMAP: introduce OPP layer for device-specific OPPs   Kevin Hilman
• [PATCH v6 01/17] wl12xx: make wl12xx.h common to both spi and sdio   Luciano Coelho
• Maximum bootable kernel size in current ARM linux   Nicolas Pitre
• resend: [PATCH] amba_pl022: Setup SPI configuration based on spi->mode   Kevin Wells
• [PATCH v6 2/7] wl1271: propagate set_power's return value   Luciano Coelho
• [PATCH v6 6/7] omap: zoom: add fixed regulator device for wlan   Ohad Ben-Cohen
• [PATCH v6 2/7] wl1271: propagate set_power's return value   Ohad Ben-Cohen
• [PATCH v6 2/7] wl1271: propagate set_power's return value   Luciano Coelho
• [PATCH v6 01/17] wl12xx: make wl12xx.h common to both spi and sdio   Ohad Ben-Cohen
• [PATCH v6 01/17] wl12xx: make wl12xx.h common to both spi and sdio   Luciano Coelho
• [PATCH v6 01/17] wl12xx: make wl12xx.h common to both spi and sdio   Tony Lindgren
• [PATCH 1/3] [ARM] tegra: add PCI Express clocks   Colin Cross
• [PATCH 2/3] [ARM] tegra: add PCI Express support   Colin Cross
• [PATCH 3/3] [ARM] tegra: harmony: enable PCI Express   Colin Cross
• [PATCH v2] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Michael Williamson
• [PATCH 3/3] [ARM] tegra: harmony: enable PCI Express   Mike Rapoport
• [PATCH 2/3] [ARM] tegra: add PCI Express support   Mike Rapoport
• [PATCH 1/3] [ARM] tegra: add PCI Express clocks   Mike Rapoport
• [RFC] mmaping with VIVT cache   Russell King - ARM Linux
• [PATCH 1/3] [ARM] tegra: add PCI Express clocks   Mogambo Park
• [PATCH v2] support for Seagate DockStar   Eric Cooper
• [PATCH 1/3] [ARM] tegra: add PCI Express clocks   Gary King
• [PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [PATCH 1/3] Add a common struct clk   Jassi Brar
• [PATCH 1/5] ARM: S5PV310: Add HSMMC support and SDHCI configuration   Kukjin Kim
• [PATCH 5/5] sdhci-s3c: Add support no internal clock divider in host controller   Kukjin Kim
• [PATCH 5/5] sdhci-s3c: Add support no internal clock divider in host controller   Kukjin Kim
• [PATCH] opp: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH] ARM: S5PV210: Add audio support to Goni and Aquila board   Chanwoo Choi
• [PATCH] ARM: S5PV210: Add audio support to Goni and Aquila board   Kukjin Kim
• [PATCH 1/3] Add a common struct clk   Jassi Brar
• [PATCH 5/5] sdhci-s3c: Add support no internal clock divider in host controller   ???
• [PATCH v2] support for Seagate DockStar   Nicolas Pitre
• [PATCH 2/6] pxa3xx_nand: rework irq logic   Eric Miao
• [PATCH 1/5] ARM: S5PV310: Add HSMMC support and SDHCI configuration   Kyungmin Park
• [PATCH 0/5] ARM: S5PV210: Add support CPUFREQ for S5PV210/S5PC110   Kukjin Kim
• [PATCH 0/5] ARM: S5PV210: Add support CPUFREQ for S5PV210/S5PC110   Kyungmin Park
• [PATCH 4/5] ARM: S5PV210: Add support CPUFREQ   JaeCheol Lee
• [PATCH] ARM: MM: bugfix: initialize spinlock for init_mm.context   MyungJoo Ham
• [PATCH 0/2] ARM: S5PV310: Update S5PV310 CPU hotplug implementation   Kukjin Kim
• [PATCH 1/2] ARM: S5PV310: Add PMU for S5PV310 hotplug   Kukjin Kim
• [PATCH 2/2] ARM: S5PV310: Update CPU hotplug implementation   Kukjin Kim
• [PATCH v3] ARM: S5PV210: Add Power Management Support   Sangbeom Kim
• [PATCH v3] ARM: S5PV210: Add Power Management Support   Kyungmin Park
• [PATCH v3] ARM: S5PV210: Add Power Management Support   Lukasz Majewski
• Still s5pc210 can't boot.   Kyungmin Park
• [PATCH 1/2] ARM: S5PV310: Add PMU for S5PV310 hotplug   Kukjin Kim
• [PATCH] ARM: MM: bugfix: initialize spinlock for init_mm.context   Catalin Marinas
• [PATCH/RFC] ARM: add a vma entry for the user accessible vector page   Russell King - ARM Linux
• [PATCH] ARM: fix a kfree address in clkdev code   Guennadi Liakhovetski
• [PATCH v2 0/2] sdhci-s3c: Add support S5PV310/S5PC210 HSMMC   Kukjin Kim
• [PATCH v2 1/2] sdhci-s3c: Add support additional host capabilities   Kukjin Kim
• [PATCH v2 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Kukjin Kim
• [PATCH 00/14] omap sram, omap4 control module and es2.0 support   Santosh Shilimkar
• [PATCH 01/14] ARM: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries   Santosh Shilimkar
• [PATCH 02/14] omap: Map only available sram memory   Santosh Shilimkar
• [PATCH 03/14] davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE   Santosh Shilimkar
• [PATCH 04/14] omap4: control: Add ctrl_pad_base to omap_globals   Santosh Shilimkar
• [PATCH 05/14] omap4: control: Add accessor api's for pad control module   Santosh Shilimkar
• [PATCH 06/14] omap4: control: Add the register definition headers   Santosh Shilimkar
• [PATCH 07/14] omap4: control: Fix the control module register accesses   Santosh Shilimkar
• [PATCH 08/14] omap: sram: fix is_sram_locked check   Santosh Shilimkar
• [PATCH 09/14] omap4: sram: Fix start address   Santosh Shilimkar
• [PATCH 10/14] omap4: Update id.c and cpu.h for es2.0   Santosh Shilimkar
• [PATCH 11/14] omap4: Fix silicon version detection for early samples   Santosh Shilimkar
• [PATCH 12/14] omap4: l2x0: Fix init parameter for es2.0   Santosh Shilimkar
• [PATCH 13/14] omap4: Panda: Add DEBUG_LL support   Santosh Shilimkar
• [PATCH 14/14] omap4: Fix bootup crash observed with higher CPU clocks   Santosh Shilimkar
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Uwe Kleine-König
• i.mx25 :trouble with serial flow hardware   Wolfram Sang
• [PATCH 01/16] spi/imx: default to m on platforms that have such devices   Uwe Kleine-König
• [PATCH 02/16] spi/imx: convert driver to use platform ids   Uwe Kleine-König
• [PATCH 03/16] spi/imx: get rid of more ifs depending on the used cpu   Uwe Kleine-König
• [PATCH 04/16] spi/imx: save the spi chip select in config struct, not the gpio to use   Uwe Kleine-König
• [PATCH 05/16] spi/imx: add support for imx51's eCSPI and CSPI   Uwe Kleine-König
• [PATCH 06/16] ARM: imx: change the way spi-imx devices are registered   Uwe Kleine-König
• [PATCH 07/16] ARM: imx: use platform ids for spi_imx devices   Uwe Kleine-König
• [PATCH 08/16] ARM: mx51: clean up mx51 header   Uwe Kleine-König
• [PATCH 09/16] ARM: mx51: fix naming of spi related defines   Uwe Kleine-König
• [PATCH 10/16] ARM: mx5: add spi_imx device registration   Uwe Kleine-König
• [PATCH 11/16] ARM: mx5/clock-mx51: refactor ccgr callbacks to use common code   Uwe Kleine-König
• [PATCH 12/16] ARM: mx5/clock-mx51: new macro that defines a clk with all members   Uwe Kleine-König
• [PATCH 13/16] ARM: mx5/clock-mx51: add spi clocks   Uwe Kleine-König
• [PATCH 14/16] ARM: mx5/iomux-mx51: add iomux definitions for eCSPI2 on the imx51_3ds board   Uwe Kleine-König
• [PATCH 15/16] ARM: mx5/mx51_3ds: add eCSPI2 support on the imx51_3ds board   Uwe Kleine-König
• [PATCH 16/16] ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stage   Uwe Kleine-König
• [PATCH] regulator: Add support samsung power domain   Kukjin Kim
• Maximum bootable kernel size in current ARM linux   Catalin Marinas
• Maximum bootable kernel size in current ARM linux   Catalin Marinas
• [PATCH 14/14] omap4: Fix bootup crash observed with higher CPU clocks   Menon, Nishanth
• [PATCH] ARM: fix a kfree address in clkdev code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/14] omap: Map only available sram memory   Russell King - ARM Linux
• [PATCH 03/14] davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE   Russell King - ARM Linux
• [PATCH 14/14] omap4: Fix bootup crash observed with higher CPU clocks   Shilimkar, Santosh
• [PATCH 05/14] omap4: control: Add accessor api's for pad control module   Menon, Nishanth
• [PATCH 11/14] omap4: Fix silicon version detection for early samples   Menon, Nishanth
• [PATCH 03/14] davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE   Shilimkar, Santosh
• [PATCH 11/14] omap4: Fix silicon version detection for early samples   Shilimkar, Santosh
• [PATCH 14/14] omap4: Fix bootup crash observed with higher CPU clocks   Menon, Nishanth
• [PATCH 14/14] omap4: Fix bootup crash observed with higher CPU clocks   Shilimkar, Santosh
• [PATCH 14/14] omap4: Fix bootup crash observed with higher CPU clocks   Felipe Balbi
• [PATCH 14/14] omap4: Fix bootup crash observed with higher CPU clocks   Felipe Balbi
• [PATCH 02/14] omap: Map only available sram memory   Shilimkar, Santosh
• [PATCH 04/16] spi/imx: save the spi chip select in config struct, not the gpio to use   Lothar Waßmann
• [PATCH 14/14] omap4: Fix bootup crash observed with higher CPU clocks   Shilimkar, Santosh
• [PATCH 14/14] omap4: Fix bootup crash observed with higher CPU clocks   Felipe Balbi
• [PATCH 04/16] spi/imx: save the spi chip select in config struct, not the gpio to use   Russell King - ARM Linux
• [PATCH 14/14] omap4: Fix bootup crash observed with higher CPU clocks   Shilimkar, Santosh
• [PATCH] regulator: Add support samsung power domain   Mark Brown
• [PATCH] regulator: Add support samsung power domain   Marek Szyprowski
• [PATCH] regulator: Add support samsung power domain   Mark Brown
• [PATCH 0/4] CPU hotplug support for Versatile platforms   Will Deacon
• [PATCH 1/4] ARM: vexpress: add support for multiple core tiles   Will Deacon
• [PATCH 2/4] ARM: realview: fix CPU hotplug support for SMP platforms   Will Deacon
• [PATCH 3/4] ARM: plat-versatile: factor out common hotplug code   Will Deacon
• [PATCH 4/4] ARM: vexpress: add support for CPU hotplug to ct-ca9x4 tile   Will Deacon
• [PATCH] at91: fix arch_gettimeoffset fallout   Peter Korsgaard
• [PATCH v2] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Sergei Shtylyov
• [PATCH/RFC] ARM: add a vma entry for the user accessible vector page   Nicolas Pitre
• [PATCH] opp: introduce library for device-specific OPPs   Linus Walleij
• [PATCH v3] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Michael Williamson
• i.mx25 :trouble with serial flow hardware   Olivier Barthel
• [PATCH] opp: introduce library for device-specific OPPs   Aguirre, Sergio
• [PATCH 2/4] OMAP: OPP: twl/tps: Introduce TWL/TPS-specific code   Gopinath, Thara
• [PATCH 2/4] OMAP: OPP: twl/tps: Introduce TWL/TPS-specific code   Nishanth Menon
• [PATCH] opp: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH 00/14] omap sram, omap4 control module and es2.0 support   Bryan Wu
• [PATCH 00/14] omap sram, omap4 control module and es2.0 support   Shilimkar, Santosh
• [PATCH 2/4] OMAP: OPP: twl/tps: Introduce TWL/TPS-specific code   Gopinath, Thara
• [PATCH] opp: introduce library for device-specific OPPs   Nishanth Menon
• [linux-pm] [PATCH] opp: introduce library for device-specific OPPs   Mark Brown
• [linux-pm] [PATCH] opp: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH] opp: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH 5/5] sdhci-s3c: Add support no internal clock divider in host controller   Chris Ball
• [linux-pm] [PATCH] opp: introduce library for device-specific OPPs   Mark Brown
• [PATCH 00/11] OMAP: Serial: Add omap-serial driver with platform support   Govindraj.R
• [PATCH 01/11] OMAP4: UART: Add uart1-4 hwmods data for omap4   Govindraj.R
• [PATCH 02/11] OMAP2/3: UART: add omap_hwmod data for UARTs 1-4   Govindraj.R
• [PATCH 03/11] OMAP: UART: omap_device converions, remove implicit 8520 assumptions   Govindraj.R
• [PATCH 04/11] OMAP2: UART: remove set_uart_globals   Govindraj.R
• [PATCH 05/11] OMAP: UART: don't do automatic bus-level suspend/resume   Govindraj.R
• [PATCH 06/11] OMAP: UART: use non-locking versions of hwmod enable/idle functions   Govindraj.R
• [PATCH 07/11] OMAP clock: Add uart4_ick/fck definitions for 3630   Govindraj.R
• [PATCH 08/11] OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs   Govindraj.R
• [PATCH 09/11] OMAP3: PM: Add prepare idle and resume idle call for uart4   Govindraj.R
• [PATCH 10/11] serial: Add OMAP high-speed UART driver   Govindraj.R
• [PATCH 11/11] OMAP: SERIAL: Enable omap-serial driver in Kconfig   Govindraj.R
• [PATCH] opp: introduce library for device-specific OPPs   Aguirre, Sergio
• [PATCH] opp: introduce library for device-specific OPPs   Aguirre, Sergio
• [PATCH] opp: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH 01/14] ARM: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries   Tony Lindgren
• [linux-pm] [PATCH] opp: introduce library for device-specific OPPs   Phil Carmody
• [PATCH] at91: fix arch_gettimeoffset fallout   john stultz
• [PATCH 00/14] omap sram, omap4 control module and es2.0 support   Paul Walmsley
• [PATCH RESEND v4 1/4] omap3: nand: prefetch in irq mode support   Tony Lindgren
• [RFC] mmaping with VIVT cache   P F
• [PATCH] opp: introduce library for device-specific OPPs   Andrew Morton
• [RFC] mmaping with VIVT cache   Russell King - ARM Linux
• [PATCH 0/4] CPU hotplug support for Versatile platforms   Rob Herring
• [PATCH] opp: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH] dmaengine: fix interrupt clearing for mv_xor   Simon Guinot
• [PATCH] opp: introduce library for device-specific OPPs   Rafael J. Wysocki
• [linux-pm] [PATCH] opp: introduce library for device-specific OPPs   Rafael J. Wysocki
• [linux-pm] [PATCH] opp: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH] opp: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH] opp: introduce library for device-specific OPPs   Kevin Hilman
• [linux-pm] [PATCH] opp: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH 0/4] CPU hotplug support for Versatile platforms   Russell King - ARM Linux
• [PATCH] opp: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH] opp: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH] opp: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH 00/11] OMAP: Serial: Add omap-serial driver with platform support   Kevin Hilman
• [PATCH 03/11] OMAP: UART: omap_device converions, remove implicit 8520 assumptions   Kevin Hilman
• [linux-pm] [PATCH] opp: introduce library for device-specific OPPs   Kevin Hilman
• [PATCH] at91: fix arch_gettimeoffset fallout   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] AT91: Add flexibity board support   Jean-Christophe PLAGNIOL-VILLARD
• [GIT PULL] Samsung fixes for 2.6.36-rc5   Kukjin Kim
• [PATCH] ARM: S5PV310: Fix clkset_moutcore_list   Kukjin Kim
• [PATCH 0/4] ARM: S5PV310: Add support S5PV310/S5PC210 CPUFREQ   Kukjin Kim
• [PATCH 1/4] ARM: S5PV310: Update CMU registers for CPUFREQ   Kukjin Kim
• [PATCH 2/4] ARM: S5PV310: Add DMC registers and map_desc   Kukjin Kim
• [PATCH 3/4] ARM: S5PV310: Add support CPUFREQ   Kukjin Kim
• [PATCH 4/4] ARM: S5PV310: Update Kconfig and Makefile for supporting CPUFREQ   Kukjin Kim
• [PATCH v2] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH v2] power: introduce library for device-specific OPPs   Greg KH
• [PATCH v2] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH v2] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH] at91: drop at91x40 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/14] omap sram, omap4 control module and es2.0 support   Shilimkar, Santosh
• [PATCH 00/11] OMAP: Serial: Add omap-serial driver with platform support   Govindraj
• [PATCH 03/11] OMAP: UART: omap_device converions, remove implicit 8520 assumptions   Govindraj
• [PATCH] at91: drop at91x40 support   Greg Ungerer
• [linux-pm] [PATCH] opp: introduce library for device-specific OPPs   Mark Brown
• [linux-pm] [PATCH] opp: introduce library for device-specific OPPs   Mark Brown
• [Openpxa-users] colibri pxa320 NAND errors   Marek Vasut
• [PATCH] at91: fix arch_gettimeoffset fallout   Peter Korsgaard
• [Openpxa-users] colibri pxa320 NAND errors   pieterg
• [Openpxa-users] colibri pxa320 NAND errors   Marek Vasut
• [PATCH] at91: drop at91x40 support   Jean-Christophe PLAGNIOL-VILLARD
• make[2]: *** No rule to make target `.config', needed by `arch/arm/boot/compressed/vmlinux.lds'   Jonathan Cameron
• [PATCH v2 0/4] OMAP4 hsmmc :card detect and Register offset handling   kishore kadiyala
• [PATCH v2 1/4] omap4 hsmmc: Adding card detect support for MMC1   kishore kadiyala
• [PATCH v2 2/4] omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set   kishore kadiyala
• [PATCH v2 3/4] omap4 hsmmc: Register offset handling   kishore kadiyala
• [PATCH v2 4/4] omap4 hsmmc: Update ocr mask for MMC2 for regulator to use   kishore kadiyala
• [PATCH RESEND v4 1/4] omap3: nand: prefetch in irq mode support   Ghorai, Sukumar
• [PATCH] opp: introduce library for device-specific OPPs   Rafael J. Wysocki
• [00/12] DMAENGINE: PL08X driver updates   Dan Williams
• [PATCH] at91: fix arch_gettimeoffset fallout   Peter Korsgaard
• [PATCH] opp: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH 0/4] CPU hotplug support for Versatile platforms   Rob Herring
• No subject  
• No subject  
• No subject  
• [PATCH] ARM: make app read out process num even not use SMP   Lei Wen
• [PATCH 1/3] [ARM] tegra: add PCI Express clocks   Mike Rapoport
• [PATCH 1/3] [ARM] tegra: add PCI Express clocks   Mike Rapoport
• [PATCH 04/16] spi/imx: save the spi chip select in config struct, not the gpio to use   Jason Wang
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Jason Wang
• [PATCH 1/5] omap3: Introduce CompuLab CM-T3517 module.   Igor Grinberg
• [PATCH 3/5] omap3: cm-t3517: add support for usb host.   Igor Grinberg
• make[2]: *** No rule to make target `.config', needed by `arch/arm/boot/compressed/vmlinux.lds'   Russell King - ARM Linux
• [PATCH] ARM: make app read out process num even not use SMP   Sergei Shtylyov
• [PATCH] ARM: make app read out process num even not use SMP   Russell King - ARM Linux
• [PATCH] ARM: make app read out process num even not use SMP   Russell King - ARM Linux
• [PATCH] ARM: make app read out process num even not use SMP   Steven Rostedt
• [PATCH] leds: leds-ns2: fix locking   Simon Guinot
• [PATCH 1/2] [ARM] Kirkwood: add LaCie d2 Network v2 support   Simon Guinot
• [PATCH 2/2] [ARM] Kirkwood: remove duplicated code in LaCie setup files   Simon Guinot
• [PATCH] leds: leds-ns2: fix locking   Simon Guinot
• make[2]: *** No rule to make target `.config', needed by `arch/arm/boot/compressed/vmlinux.lds'   Jonathan Cameron
• [PATCH] leds: leds-ns2: fix locking   Simon Guinot
• [PATCH 0/3] [ARM] tegra: PCI Express support   Mike Rapoport
• [PATCH] dmaengine: fix interrupt clearing for mv_xor   saeed bishara
• [PATCH 0/3] [ARM] tegra: PCI Express support   Arnd Bergmann
• [PATCH 0/3] [ARM] tegra: PCI Express support   Russell King - ARM Linux
• setting and removing break-point from within kernel   Uma shankar
• make[2]: *** No rule to make target `.config', needed by `arch/arm/boot/compressed/vmlinux.lds'   Russell King - ARM Linux
• [PATCH 0/3] [ARM] tegra: PCI Express support   Mike Rapoport
• [PATCH 0/3] [ARM] tegra: PCI Express support   Russell King - ARM Linux
• [PATCH 0/3] [ARM] tegra: PCI Express support   Arnd Bergmann
• [PATCH] ARM: make app read out process num even not use SMP   Steven Rostedt
• [PATCH 0/3] [ARM] tegra: PCI Express support   Russell King - ARM Linux
• [PATCH 0/3] [ARM] tegra: PCI Express support   Arnd Bergmann
• [PATCH V3 1/1] ARM: s3c2440: various fixes in Kconfig file   Abdoulaye Walsimou Gaye
• [PATCH] opp: introduce library for device-specific OPPs   Mark Brown
• [PATCH] ARM: (trivial) fix format warning in arch/arm/mm/init.c   Michał Mirosław
• [PATCH] ARM: pxa: reduce the scope of get_clk_frequency_khz()   Haojian Zhuang
• [PATCH 1/2] ARM: pxa: reduce the scope of get_clk_frequency_khz()   Haojian Zhuang
• [PATCH 2/2] ARM: pxa: reduce the scope of get_memclk_frequency_10khz()   Haojian Zhuang
• [PATCH] leds: leds-ns2: fix locking   Nicolas Pitre
• Git pull request for 2.6.36-rc   Nicolas Pitre
• Git pull request: disable Neon on old i.MX51   Nicolas Pitre
• Issue in using mmap on ARM target   naveen yadav
• [PATCH] at91: drop at91x40 support   Greg Ungerer
• [PATCH] arm: arm7tdmi needs an empty cpu_arm7tdmi_set_pte_ext   Greg Ungerer
• [PATCH v2 0/6] ARM: S5PV210: Add support S5PV210/S5PC110 CPUFREQ   Sangbeom Kim
• [PATCH v2 1/6] ARM: S5PV210: Add DMC map_desc table for supporting DMC access   Sangbeom Kim
• [PATCH v2 2/6] ARM: S5PV210: Add struct clk_ops for clk_fout_apll   Sangbeom Kim
• [PATCH v2 3/6] ARM: S5PV210: Add MOUT_DMC0 and SCLK_DMC0 clocks   Sangbeom Kim
• [PATCH v2 4/6] ARM: S5PV210: Add Register definition for CMU   Sangbeom Kim
• [PATCH v2 5/6] ARM: S5PV210: Add support CPUFREQ   Sangbeom Kim
• [PATCH v2 6/6] ARM: S5PV210: Update Kconfig and Makefile for supporting CPUFREQ driver   Sangbeom Kim
• [PATCH] regulator: Add support samsung power domain   Kukjin Kim
• [PATCH] at91: drop at91x40 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: S5PV310: Add support RTC   Kukjin Kim
• [PATCH 2/2] ARM: S5PV310: Add support Watchdog Timer   Kukjin Kim
• [PATCH 3/5] omap3: cm-t3517: add support for usb host.   Felipe Balbi
• [PATCH] at91: drop at91x40 support   Greg Ungerer
• [PATCH 0/3] [ARM] tegra: PCI Express support   Mike Rapoport
• Regression on UP ARM from commit e18d65f0500b95d8724b17d8ea9f1116cf390bbe   Pekka Enberg
• [PATCH] mmc: failure of block read wait for long time   Adrian Hunter
• [PATCH] arm: fix use of clock disable on idle for simple AT91 devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] MTD: generic FSMC NAND MTD driver   Artem Bityutskiy
• [PATCH] mmc: failure of block read wait for long time   Ghorai, Sukumar
• [PATCH 0/3] [ARM] tegra: PCI Express support   Arnd Bergmann
• [PATCH] regulator: Add support samsung power domain   Mark Brown
• [PATCH 0/3] [ARM] tegra: PCI Express support   Russell King - ARM Linux
• [RFC] mmaping with VIVT cache   Pawel Moll
• [RFC] mmaping with VIVT cache   Russell King - ARM Linux
• [RFC] mmaping with VIVT cache   Pawel Moll
• [PATCH] mmc: failure of block read wait for long time   Adrian Hunter
• [PATCH] mmc: failure of block read wait for long time   Ghorai, Sukumar
• [PATCH v2] ARM: S5PC110: Samsung Goni board update   Marek Szyprowski
• [PATCHv2 1/7] ARM: S5PC110: update framebuffer setup information for Goni   Marek Szyprowski
• [PATCHv2 2/7] ARM: S5PC110: fb setup for Goni - remove pixel clock   Marek Szyprowski
• [PATCHv2 3/7] ARM: S5PC110: add support for S6E63M0 LCD controller on Goni board   Marek Szyprowski
• [PATCHv2 4/7] ARM: S5PC110: Add si470x radio device to the GONI board   Marek Szyprowski
• [PATCHv2 5/7] ARM: S5PV210: Enable USB HSOTG gadget build   Marek Szyprowski
• [PATCHv2 6/7] ARM: S5PC110: add support for otg usb gadget on Goni board   Marek Szyprowski
• [PATCHv2 7/7] ARM: S5PC110: add support for MMC regulators on Goni board   Marek Szyprowski
• [PATCH 1/3] dmaengine: add possibility for cyclic transfers   Sascha Hauer
• [PATCH] sdhci-s3c: fix incorrect spinlock usage after merge   Marek Szyprowski
• [PATCHv2 7/7] ARM: S5PC110: add support for MMC regulators on Goni board   Mark Brown
• [PATCH] mmc: failure of block read wait for long time   Adrian Hunter
• Regression on UP ARM from commit e18d65f0500b95d8724b17d8ea9f1116cf390bbe   Linus Walleij
• [PATCH] mmc: failure of block read wait for long time   Ghorai, Sukumar
• [PATCH RESEND v4 1/4] omap3: nand: prefetch in irq mode support   Ghorai, Sukumar
• [PATCH] mmc: failure of block read wait for long time   Russell King - ARM Linux
• [PATCH 48/74] GIC: Added dummy handlers for Power Management Suspend Resume   deepaksi
• [PATCH 48/74] GIC: Added dummy handlers for Power Management Suspend Resume   Russell King - ARM Linux
• [PATCH 01/11] ARM: pxa: Prepare pxa2xx pcmcia for pxa320   Eric Miao
• [PATCH 02/11] ARM: pxa: Toradex Colibri PXA270 CF support   Eric Miao
• [PATCH 02/11] ARM: pxa: Toradex Colibri PXA270 CF support   Eric Miao
• [PATCH 03/11] ARM: pxa: Push Colibri evalboard MFP into module files   Eric Miao
• [PATCH 04/11] ARM: pxa: Add M41T00 RTC support into Colibri evalboard   Eric Miao
• [PATCH 05/11] ARM: pxa: Rename Colibri evalboard   Eric Miao
• [PATCH 06/11] ARM: pxa: Colibri PXA320 PCMCIA driver   Eric Miao
• [PATCH 07/11] ARM: pxa: Modularize Palm Tungsten|C   Eric Miao
• [PATCH 08/11] UCB1400: Pass ucb1400-gpio data through ac97 bus   Eric Miao
• [PATCH 3/5] omap3: cm-t3517: add support for usb host.   Igor Grinberg
• [PATCH 09/11] ARM: pxa: Correct touch IRQ passing to UCB1400 on vpac270   Eric Miao
• [PATCH 10/11] ARM: pxa: Pass GPIO offset to ucb1400-gpio on PalmTC   Eric Miao
• [PATCH 11/11] ARM: pxa: Add gpio-leds and vibrator support to PalmTC   Eric Miao
• [PATCH] [RFC][ARM] pxa: rework pxa3xx-ulpi driver calls for ohci-pxa27x   Igor Grinberg
• [PATCH] mmc: add support of sdhci-pxa driver   Zhangfei Gao
• [PATCH 1/3] mmc: add support of sdhci-pxa driver   Zhangfei Gao
• [PATCH] ARM: plug a race with the alignment trap handler   Russell King - ARM Linux
• [PATCH 48/74] GIC: Added dummy handlers for Power Management Suspend Resume   Rob Herring
• [PATCH 48/74] GIC: Added dummy handlers for Power Management Suspend Resume   Russell King - ARM Linux
• [PATCH] arm: fix use of clock disable on idle for simple AT91 devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] opp: introduce library for device-specific OPPs   Kevin Hilman
• Machine name/id change request   Matt Sealey
• [PATCH] ARM: plug a race with the alignment trap handler   Nicolas Pitre
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Uwe Kleine-König
• Machine name/id change request   Russell King - ARM Linux
• Machine name/id change request   Matt Sealey
• Machine name/id change request   Amit Kucheria
• Machine name/id change request   Russell King - ARM Linux
• [PATCH 00/11] OMAP: Serial: Add omap-serial driver with platform support   Kevin Hilman
• [PATCH] atmel_usba_udc: force vbus_pin at -EINVAL when gpio_request failled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] opp: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH v3] AT91: Add flexibity board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: make app read out process num even not use SMP   Steven Rostedt
• [PATCH 48/74] GIC: Added dummy handlers for Power Management Suspend Resume   Rob Herring
• [PATCH] opp: introduce library for device-specific OPPs   Kevin Hilman
• [PATCH] opp: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH 48/74] GIC: Added dummy handlers for Power Management Suspend Resume   Russell King - ARM Linux
• Could it be a case of deadlock on SMP?   Andrew Yan-Pai Chen
• Could it be a case of deadlock on SMP?   Russell King - ARM Linux
• [PATCH v3] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Kevin Hilman
• [PATCH v2 3/4] omap4 hsmmc: Register offset handling   Cousson, Benoit
• [PATCH] ARM: s3c2442: Setup gpio {set,get}_pull callbacks   Lars-Peter Clausen
• [PATCH] ARM: s3c24xx: Set ARCH_NR_GPIOS according to the selected SoC types.   Lars-Peter Clausen
• [PATCH] ARM: s3c2442: Setup gpio {set,get}_pull callbacks   Ben Dooks
• [PATCH v2 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Ben Dooks
• colibri-pxa320/AX88796: phy-read/write problems   Ben Dooks
• [PATCH] sdhci-s3c: fix incorrect spinlock usage after merge   Chris Ball
• [PATCH] sdhci-s3c: fix incorrect spinlock usage after merge   Andrew Morton
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Jason Wang
• [PATCH] sdhci-s3c: fix incorrect spinlock usage after merge   Chris Ball
• [PATCH 4/6] ARM: S5PC100: Move external interrupt defines   Marek Szyprowski
• [PATCH] ARM: s3c2442: Setup gpio {set,get}_pull callbacks   Abdoulaye Walsimou GAYE
• [PATCH v6 3/7] wl12xx: add platform data passing support   Luciano Coelho
• [PATCH v6 4/7] wl1271: take irq info from private board data   Luciano Coelho
• [PATCH v6 5/7] wl1271: make ref_clock configurable by board   Luciano Coelho
• [PATCH v3] AT91: Add flexibity board support   avictor.za at gmail.com
• [PATCH v3] AT91: Add flexibity board support   Maxim Osipov
• [PATCH 3/5] omap3: cm-t3517: add support for usb host.   Felipe Balbi
• [PATCH v2 3/4] omap4 hsmmc: Register offset handling   kishore kadiyala
• [PATCH 03/10] OMAP3: PM: move device-specific special cases from PM core into CPUidle   Paul Walmsley
• [PATCH 1/1] ARM: mmp: update cpuid of pxa168 and pxa910   Haojian Zhuang
• [PATCH] arm: fix use of clock disable on idle for simple AT91 devices   Greg Ungerer
• [PATCH] arm: fix use of clock disable on idle for AT91x40 devices   Greg Ungerer
• [PATCH 00/74] Updating SPEAr Support   Matthias Fuchs
• [PATCH 00/74] Updating SPEAr Support   viresh kumar
• [PATCH v2 0/3] *** SUBJECT HERE ***   Mike Rapoport
• [PATCH v2 1/3] [ARM] tegra: add PCI Express clocks   Mike Rapoport
• [PATCH v2 2/3] [ARM] tegra: add PCI Express support   Mike Rapoport
• [PATCH v2 3/3] [ARM] tegra: harmony: enable PCI Express   Mike Rapoport
• [PATCH v2 2/3] [ARM] tegra: add PCI Express support   Arnd Bergmann
• [PATCH 0/4] Adding support for esdhc on mx35/51   Wolfram Sang
• [PATCH 1/4] mmc: sdhci-pltfm: Add structure for host-specific data   Wolfram Sang
• [PATCH 2/4] mmc: sdhci-pltfm: move .h-file into apropriate subdir   Wolfram Sang
• [PATCH 3/4] mmc: sdhci-of-esdhc: factor out common stuff   Wolfram Sang
• [PATCH 4/4] mmc: sdhci-pltfm: add pltfm-driver for imx35/51   Wolfram Sang
• [PATCH RESEND v4 1/4] omap3: nand: prefetch in irq mode support   Ghorai, Sukumar
• [PATCH 3/4] mmc: sdhci-of-esdhc: factor out common stuff   Anton Vorontsov
• [PATCH 2/4] mmc: sdhci-pltfm: move .h-file into apropriate subdir   Anton Vorontsov
• [PATCH 4/4] mmc: sdhci-pltfm: add pltfm-driver for imx35/51   Anton Vorontsov
• [PATCH 1/4] mmc: sdhci-pltfm: Add structure for host-specific data   Anton Vorontsov
• [PATCH v2 2/3] [ARM] tegra: add PCI Express support   Pawel Moll
• [PATCH v2 2/3] [ARM] tegra: add PCI Express support   Arnd Bergmann
• [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe   Ameya Palande
• [PATCH v7 0/6] OMAP: WDT: Implement WDT in hwmod way   Varadarajan, Charulatha
• [PATCH v7 1/6] OMAP3: hwmod data: Add watchdog timer   Varadarajan, Charulatha
• [PATCH v7 2/6] OMAP2420: hwmod data: Add watchdog timer   Varadarajan, Charulatha
• [PATCH v7 3/6] OMAP2430: hwmod data: Add watchdog timer   Varadarajan, Charulatha
• [PATCH v7 4/6] OMAP4: hwmod data: Add watchdog timer   Varadarajan, Charulatha
• [PATCH v7 5/6] OMAP: WDT: Split OMAP1 and OMAP2PLUS device registration   Varadarajan, Charulatha
• [PATCH v7 6/6] OMAP: WDT: Use PM runtime APIs instead of clk FW APIs   Varadarajan, Charulatha
• [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe   G, Manjunath Kondaiah
• [PATCH v3 0/5] Convert I2C driver to use omap_device/runtime PM   Rajendra Nayak
• [PATCH v3 1/5] OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430   Rajendra Nayak
• [PATCH v3 2/5] OMAP3: hwmod: add I2C hwmods for OMAP3430   Rajendra Nayak
• [PATCH v3 3/5] OMAP4: hwmod: add I2C hwmods for OMAP4430   Rajendra Nayak
• [PATCH v3 4/5] OMAP: I2C: split device registration and convert OMAP2+ to omap_device   Rajendra Nayak
• [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's   Rajendra Nayak
• [PATCH] mfd: regulator: max8998: BUCK1/2 control augmented by GPIO pins   Lukasz Majewski
• [PATCH v2 2/3] [ARM] tegra: add PCI Express support   Mike Rapoport
• [PATCH RESEND v4 1/4] omap3: nand: prefetch in irq mode support   Tony Lindgren
• [PATCH] mfd: regulator: max8998: BUCK1/2 control augmented by GPIO pins   Mark Brown
• [PATCH v2 2/3] [ARM] tegra: add PCI Express support   Arnd Bergmann
• [PATCH 00/11] OMAP: Serial: Add omap-serial driver with platform support   Govindraj
• [PATCH] at91sam9g20ek: merge 2mmc version in one board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5] Support for CompuLab CM-T3517 modules   Igor Grinberg
• [PATCH 1/5] omap3: Introduce CompuLab CM-T3517 module.   Igor Grinberg
• [PATCH 2/5] omap3: cm-t3517: add support for v3020 rtc.   Igor Grinberg
• [PATCH 3/5] omap3: cm-t3517: add support for usb host.   Igor Grinberg
• [PATCH 4/5] omap3: cm-t3517: add support for NAND flash   Igor Grinberg
• [PATCH 5/5] omap3: cm-t3517: add support for TI HECC   Igor Grinberg
• [PATCH] ARM: fix build break due to typo in cacheflush.h   Anand Gadiyar
• [PATCH] ARM: fix build break due to typo in cacheflush.h   Tony Lindgren
• [PATCH] ARM: Handle __flush_icache_all for CONFIG_SMP_ON_UP   Tony Lindgren
• [PATCH 1/6 V2] pxa3xx_nand: make scan procedure more clear   Lei Wen
• [PATCH 3/5] omap3: cm-t3517: add support for usb host.   Gadiyar, Anand
• [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe   Dmitry Torokhov
• [PATCH 2/6 V2] pxa3xx_nand: rework irq logic   Lei Wen
• [PATCH 00/11] OMAP: hwmod: core patches for 2.6.37   Paul Walmsley
• [PATCH 01/11] OMAP: hwmod: Rename dma_ch to dma_req   Paul Walmsley
• [PATCH 02/11] OMAP: hwmod: Do not disable clocks if hwmod already in idle   Paul Walmsley
• [PATCH 03/11] OMAP: hwmod: Fix omap_hwmod_reset wrong state test   Paul Walmsley
• [PATCH 04/11] OMAP4: prcm: Fix global warm reset bit position   Paul Walmsley
• [PATCH 05/11] [PATCH] OMAP: hwmod: separate list locking and hwmod hardware locking   Paul Walmsley
• [PATCH 06/11] OMAP4: prcm: Add temporarily helper functions for rmw and read inside the PRM   Paul Walmsley
• [PATCH 07/11] OMAP4: PRM: add module hard reset support   Paul Walmsley
• [PATCH 08/11] OMAP2/3: PRM: add module hard reset support   Paul Walmsley
• [PATCH 09/11] OMAP: hwmod: Add hardreset management support   Paul Walmsley
• [PATCH 10/11] OMAP: hwmod: Force a softreset during _setup   Paul Walmsley
• [PATCH 11/11] OMAP: hwmod: add an hardreset API for use by other core code   Paul Walmsley
• [PATCH 1/5] ptp: Added a brand new class driver for ptp clocks.   Stephan Gatzka
• [PATCH 03/10] OMAP3: PM: move device-specific special cases from PM core into CPUidle   Kevin Hilman
• Regarding hw irq to Linux irq mapping on ARM   Grant Likely
• [PATCH 00/11] OMAP: Serial: Add omap-serial driver with platform support   Kevin Hilman
• [PATCH 1/5] ptp: Added a brand new class driver for ptp clocks.   Kyle Moffett
• Regarding hw irq to Linux irq mapping on ARM   Thomas Gleixner
• [PATCH 06/11] ARM: pxa: Colibri PXA320 PCMCIA driver   Marek Vasut
• [PATCH 05/11] ARM: pxa: Rename Colibri evalboard   Marek Vasut
• [PATCH 03/11] ARM: pxa: Push Colibri evalboard MFP into module files   Marek Vasut
• [PATCH 02/11] ARM: pxa: Toradex Colibri PXA270 CF support   Marek Vasut
• Regarding hw irq to Linux irq mapping on ARM   Benjamin Herrenschmidt
• [PATCH v7 4/6] OMAP4: hwmod data: Add watchdog timer   Cousson, Benoit
• [PATCH 0/5] OMAP: hwmod: second set of core patches for 2.6.37   Paul Walmsley
• [PATCH 1/5] OMAP: hwmod: Fix softreset status check for some new OMAP4 IPs   Paul Walmsley
• [PATCH 2/5] OMAP: hwmod: Fix softreset for modules with optional clocks   Paul Walmsley
• [PATCH 3/5] OMAP: hwmod: Enable module wakeup if in smartidle   Paul Walmsley
• [PATCH 4/5] OMAP: hwmod: Handle opt clocks node using clk_add_alias   Paul Walmsley
• [PATCH 5/5] OMAP: hwmod: improve documentation, clean up function names   Paul Walmsley
• [PATCH 2/4] mmc: sdhci-pltfm: move .h-file into apropriate subdir   Ben Dooks
• [PATCH 1/2 v3]Update broken web addresses.   Justin P. Mattock
• [PATCH 2/2 v3]Update broken web addresses archive dot org only.   Justin P. Mattock
• Regarding hw irq to Linux irq mapping on ARM   Grant Likely
• Regarding hw irq to Linux irq mapping on ARM   Grant Likely
• [PATCH 1/2 v3]Update broken web addresses.   Finn Thain
• [PATCH 1/2 v3]Update broken web addresses.   Justin P. Mattock
• Regarding hw irq to Linux irq mapping on ARM   Benjamin Herrenschmidt
• [PATCH] mmc: failure of block read wait for long time   Ghorai, Sukumar
• [PATCH] sam9m10g45ek: use the right machine id   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mfd: regulator: max8998: BUCK1/2 control augmented by GPIO pins   Lukasz Majewski
• [PATCH|RESEND] MX35: Fix bogus L2 cache settings   Michael Grzeschik
• [PATCH 1/2] MTD: generic FSMC NAND MTD driver   Linus Walleij
• [PATCH 3/5] omap3: cm-t3517: add support for usb host.   Igor Grinberg
• [GIT PULL] omap2 sparse fixes   G, Manjunath Kondaiah
• [PATCH v2 1/4] omap4 hsmmc: Adding card detect support for MMC1   Felipe Balbi
• [GIT PULL] omap2 sparse fixes   G, Manjunath Kondaiah
• Regarding hw irq to Linux irq mapping on ARM   Eric Miao
• [PATCH v2|RESEND] mx35_3ds: Add the TFT display to the board file   Michael Grzeschik
• [PATCH v2|RESEND] Separate display's pixel configuration from video mode   Michael Grzeschik
• [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe   G, Manjunath Kondaiah
• [PATCH] mx3fb and ipu_idmac cleanups   Michael Grzeschik
• [PATCH 2/4] mmc: sdhci-pltfm: move .h-file into apropriate subdir   Wolfram Sang
• [PATCH] update OMAP Kconfig help texts for all supported SoC models   Lennert Buytenhek
• [PATCH] mx3fb and ipu_idmac cleanups   Wolfram Sang
• [PATCH] at91sam9g45: fix i2c bus speed   Peter Korsgaard
• [PATCH v2 1/4] omap4 hsmmc: Adding card detect support for MMC1   kishore kadiyala
• [PATCH 3/5] OMAP: hwmod: Enable module wakeup if in smartidle   Sergei Shtylyov
• [PATCH 1/5] ptp: Added a brand new class driver for ptp clocks.   Richard Cochran
• [PATCH] mfd: regulator: max8998: BUCK1/2 control augmented by GPIO pins   Mark Brown
• [PATCH] at91sam9g45: fix i2c bus speed   Jean-Christophe PLAGNIOL-VILLARD
• Regarding hw irq to Linux irq mapping on ARM   Mark Brown
• Regarding hw irq to Linux irq mapping on ARM   Mark Brown
• [PATCH 1/2 v3]Update broken web addresses.   Ralf Baechle
• Regarding hw irq to Linux irq mapping on ARM   Shaju Abraham
• [PATCH] at91sam9g45: fix i2c bus speed   Peter Korsgaard
• Regarding hw irq to Linux irq mapping on ARM   Grant Likely
• [PATCH] mmc: failure of block read wait for long time   Chris Ball
• [PATCH] mmc: failure of block read wait for long time   Ghorai, Sukumar
• [PATCH v2|RESEND] Separate display's pixel configuration from video mode   Guennadi Liakhovetski
• [PATCH 1/2 v3]Update broken web addresses.   Jeremy Kerr
• [PATCH] mx3: remove mx31pdk_defconfig   Fabio Estevam
• [PATCH] at91sam9g45: fix i2c bus speed   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] Separate display's pixel configuration from video mode   Michael Grzeschik
• [RFC] ARM: DMA coherent allocator: align remapped addresses   Anders Grafström
• [PATCH] at91sam9g45: fix i2c bus speed   Wolfgang Wegner
• [PATCH 00/13 v2] OMAP: Serial: Add omap-serial driver with platform support   Govindraj.R
• [PATCH 01/13 v2] OMAP4: UART: Add uart1-4 hwmods data for omap4   Govindraj.R
• [PATCH 02/13 v2] OMAP2/3: UART: add omap_hwmod data for UARTs 1-4   Govindraj.R
• [PATCH 03/13 v2] OMAP: UART: omap_device converions, remove implicit 8520 assumptions   Govindraj.R
• [PATCH 04/13 v2] OMAP2: UART: remove set_uart_globals   Govindraj.R
• [PATCH 05/13 v2] OMAP: UART: don't do automatic bus-level suspend/resume   Govindraj.R
• [PATCH 06/13 v2] OMAP: UART: use non-locking versions of hwmod enable/idle functions   Govindraj.R
• [PATCH 07/13 v2] OMAP clock: Add uart4_ick/fck definitions for 3630   Govindraj.R
• [PATCH 08/13 v2] OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs   Govindraj.R
• [PATCH 09/13 v2] OMAP3: PM: Add prepare idle and resume idle call for uart4   Govindraj.R
• [PATCH 10/13 v2] OMAP3: serial: Fix uart4 handling for 3630   Govindraj.R
• [PATCH 11/13 v2] serial: Add OMAP high-speed UART driver   Govindraj.R
• [PATCH 12/13 v2] OMAP: SERIAL: Enable omap-serial driver in Kconfig   Govindraj.R
• [PATCH 13/13 v2] OMAP3: SERIAL: Initialize all omap-uarts for zoom boards   Govindraj.R
• [PATCH] at91sam9g45: fix i2c bus speed   Peter Korsgaard
• [PATCH 3/5] OMAP: hwmod: Enable module wakeup if in smartidle   Paul Walmsley
• [PATCH v2 0/3] mfd: regulator: max8998: BUCK1/2 control augmented by GPIO pins   Lukasz Majewski
• [PATCH v2 1/3] mfd: regulator: max8998: set_voltage_buck routine added   Lukasz Majewski
• [PATCH v2 2/3] mfd: regulator: max8998: probe routine modified for GPIOs use   Lukasz Majewski
• [PATCH v2 3/3] mfd: regulator: max8998: mfd code   Lukasz Majewski
• mpcore_wdt A9 questions   John Linn
• [PATCH] ARM: kprobes-decode: add support for MOVW instruction   Will Deacon
• mpcore_wdt A9 questions   George G. Davis
• [PATCH v2 3/3] mfd: regulator: max8998: mfd code   Mark Brown
• [PATCH] at91sam9g45: fix i2c bus speed   Nicolas Ferre
• [PATCH] at91sam9g45: fix i2c bus speed   Nicolas Ferre
• [PATCH 13/13 v2] OMAP3: SERIAL: Initialize all omap-uarts for zoom boards   Aguirre, Sergio
• [PATCH] at91sam9g45: fix i2c bus speed   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91sam9g45: fix i2c bus speed   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/3] mfd: regulator: max8998: set_voltage_buck routine added   Mark Brown
• [PATCH v3] Separate display's pixel configuration from video mode   Guennadi Liakhovetski
• [PATCH v3 0/4] omap4 hsmmc: Card detect and Register offset handling   kishore kadiyala
• [PATCH v3 1/4] omap4 hsmmc: Adding card detect support for MMC1   kishore kadiyala
• [PATCH v3 2/4] omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set   kishore kadiyala
• [PATCH v3 3/4] omap4 hsmmc: Register offset handling   kishore kadiyala
• [PATCH v3 4/4] omap4 hsmmc: Update ocr mask for MMC2 for regulator to use   kishore kadiyala
• [PATCH 11/13 v2] serial: Add OMAP high-speed UART driver   Aguirre, Sergio
• Unable to get CF working on HP Jornada 700 flashrom   Kristoffer Ericson
• pxa3xx_nand issues   pieterg
• [PATCH] update OMAP Kconfig help texts for all supported SoC models   Tony Lindgren
• [PATCH 0/4] CPU hotplug support for Versatile platforms   Will Deacon
• [PATCH v3 2/4] omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set   Sergei Shtylyov
• [PATCH] update OMAP Kconfig help texts for all supported SoC models   Lennert Buytenhek
• [PATCH v3 1/4] omap4 hsmmc: Adding card detect support for MMC1   Kanigeri, Hari
• [PATCH] update OMAP Kconfig help texts for all supported SoC models   Tony Lindgren
• [PATCH 00/13 v2] OMAP: Serial: Add omap-serial driver with platform support   Kevin Hilman
• [PATCH 10/13 v2] OMAP3: serial: Fix uart4 handling for 3630   Kevin Hilman
• [PATCH v3] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH 0/3] Fixing udelay() on SMP (and non-SMP too)   Daniel Walker
• [PATCH v3] power: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH v3] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH 11/12] DMAENGINE: let PL08X memcpy TXDs wait   Dan Williams
• PXA270 audio problem   Santhosh N
• [PATCH v3 1/4] omap4 hsmmc: Adding card detect support for MMC1   kishore kadiyala
• pxa3xx_nand issues   Eric Miao
• PXA270 audio problem   Eric Miao
• [PATCH 2/3] Added the M3IF base address   Tobias Wirtl (none)
• [PATCH 04/20] arm: change to new flag variables   matt mooney
• PXA270 audio problem   Santhosh N
• [GIT PULL] OMAP: hwmod fixes and improvements for 2.6.37   Paul Walmsley
• PXA270 audio problem   Santhosh N
• [PATCH 11/12] DMAENGINE: let PL08X memcpy TXDs wait   Linus Walleij
• [PATCH 11/12] DMAENGINE: let PL08X memcpy TXDs wait   Linus Walleij
• [PATCH] at91sam9g45: fix i2c bus speed   Nicolas Ferre
• [PATCH] at91sam9g45: fix i2c bus speed   Peter Korsgaard
• [PATCH] at91sam9g45: fix i2c bus speed   Russell King - ARM Linux
• [PATCH] at91sam9g45: fix i2c bus speed   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91sam9g45: fix i2c bus speed   Peter Korsgaard
• [PATCH] at91sam9g45: fix i2c bus speed   Peter Korsgaard
• [PATCH] at91sam9g45: fix i2c bus speed   Russell King - ARM Linux
• [PATCH] at91sam9g45: fix i2c bus speed   Peter Korsgaard
• [PATCH] at91sam9g45: fix i2c bus speed   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/13 v2] serial: Add OMAP high-speed UART driver   Govindraj
• [PATCH 10/13 v2] OMAP3: serial: Fix uart4 handling for 3630   Govindraj
• [PATCH] at91sam9g45: fix i2c bus speed   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: fix use of clock disable on idle for AT91x40 devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: scoop.c: remove C99 comments   Jiri Kosina
• [PATCH] arm: uengine.c: remove C99 comments   Jiri Kosina
• [PATCH] at91: drop at91x40 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] power: introduce library for device-specific OPPs   Linus Walleij
• [PATCH] at91sam9g45: fix i2c bus speed   Peter Korsgaard
• pxa3xx_nand issues   pieterg
• [PATCH] at91sam9g45: fix i2c bus speed   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] MTD: generic FSMC NAND MTD driver   Artem Bityutskiy
• [PATCH] sam9m10g45ek: use the right machine id   Nicolas Ferre
• [PATCH] sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove   Marek Szyprowski
• [PATCH v8 0/6] OMAP: WDT: Implement WDT in hwmod way   Varadarajan, Charulatha
• [PATCH v8 1/6] OMAP3: hwmod data: Add watchdog timer   Varadarajan, Charulatha
• [PATCH v8 2/6] OMAP2420: hwmod data: Add watchdog timer   Varadarajan, Charulatha
• [PATCH v8 3/6] OMAP2430: hwmod data: Add watchdog timer   Varadarajan, Charulatha
• [PATCH v8 4/6] OMAP4: hwmod data: Add watchdog timer   Varadarajan, Charulatha
• [PATCH v8 5/6] OMAP: WDT: Split OMAP1 and OMAP2PLUS device registration   Varadarajan, Charulatha
• [PATCH v8 6/6] OMAP: WDT: Use PM runtime APIs instead of clk FW APIs   Varadarajan, Charulatha
• [PATCH] Fixing ethernet driver compilation error for i.MX32 ADS board   Ian Lartey
• [PATCH v3] power: introduce library for device-specific OPPs   Kevin Hilman
• [PATCH] Fixing ethernet driver compilation error for i.MX32 ADS board   Fabio Estevam
• [PATCH] Fixing ethernet driver compilation error for i.MX32 ADS board   Ian Lartey
• [PATCH v2 3/3] [ARM] tegra: harmony: enable PCI Express   Olof Johansson
• [PATCH v8 3/6] OMAP2430: hwmod data: Add watchdog timer   Russell King - ARM Linux
• [PATCH 11/12] DMAENGINE: let PL08X memcpy TXDs wait   Dan Williams
• pxa3xx_nand issues   pieterg
• [PATCH] Fixing ethernet driver compilation error for i.MX31 ADS board   Ian Lartey
• [PATCH 11/12] DMAENGINE: let PL08X memcpy TXDs wait   Dan Williams
• [PATCH] OMAP3: CPUidle: trigger early idle notification call chain   Kevin Hilman
• [PATCH v8 3/6] OMAP2430: hwmod data: Add watchdog timer   Paul Walmsley
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Tony Lindgren
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Cory Maccarrone
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Richard Cochran
• [PATCH 1/8] posix clocks: introduce a syscall for clock tuning.   Richard Cochran
• [PATCH 2/8] posix clocks: dynamic clock ids.   Richard Cochran
• [PATCH 3/8] posix clocks: introduce a sysfs presence.   Richard Cochran
• [PATCH 4/8] ptp: Added a brand new class driver for ptp clocks.   Richard Cochran
• [PATCH 5/8] ptp: Added a simulated PTP hardware clock.   Richard Cochran
• [PATCH 6/8] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Richard Cochran
• [PATCH 7/8] ptp: Added a clock driver for the IXP46x.   Richard Cochran
• [PATCH 8/8] ptp: Added a clock driver for the National Semiconductor PHYTER.   Richard Cochran
• [PATCH 0/4] U5500 mailbox driver and modem irq handler   Stefan Nilsson9
• [PATCH 1/4] Resources for U5500 mbox driver and modem irq handler   Stefan Nilsson9
• [PATCH 2/4] U5500 generic modem IRQ handler   Stefan Nilsson9
• [PATCH 3/4] U5500 mailbox driver   Stefan Nilsson9
• [PATCH 4/4] Build configuration for U5500 mbox and modem irq handler   Stefan Nilsson9
• [PATCH 7/7] omap3: make coresight register save across OFF modes a sysfs option   Tony Lindgren
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Christoph Lameter
• pxa3xx_nand issues   Matt Reimer
• [PATCH 0/3] OMAP: pm-next: few more PM updates for 2.6.37   Kevin Hilman
• [PATCH 1/3] OMAP4: hwmod: Add initial data for OMAP4430 ES1 & ES2   Kevin Hilman
• [PATCH 2/3] OMAP4: pm: Change l3_main to l3_main_1 during bus device init   Kevin Hilman
• [PATCH 3/3] OMAP: GPIO: ensure debounce clocks are disabled during idle/suspend   Kevin Hilman
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Jacob Keller
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Christoph Lameter
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   john stultz
• [PATCH] sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove   Andrew Morton
• [PATCH] sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove   Chris Ball
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Christoph Lameter
• [RESEND PATCH] serial: samsung: fix device name   Darius Augulis
• [PATCH 6/8] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Christoph Lameter
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   john stultz
• [RESEND PATCH] serial: samsung: fix device name   Wolfram Sang
• [PATCH 1/3] dmaengine: add possibility for cyclic transfers   Dan Williams
• [PATCH 1/8] posix clocks: introduce a syscall for clock tuning.   john stultz
• [PATCH 2/3] dmaengine: add wrapper functions for dmaengine   Dan Williams
• [PATCH 12/12] mmci: support variants with only one irq   Linus Walleij
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   john stultz
• [PATCH 6/8] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Christoph Lameter
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Alan Cox
• [PATCH 6/8] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Alan Cox
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   john stultz
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Christoph Lameter
• [PATCH] ARM: do not define VMALLOC_END relative to PAGE_OFFSET   Nicolas Pitre
• [PATCH] ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via /dev/mem   Nicolas Pitre
• [PATCH] ARM: SECCOMP support   Nicolas Pitre
• [PATCH] ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via /dev/mem   Russell King - ARM Linux
• [PATCH] dmaengine: fix interrupt clearing for mv_xor   Dan Williams
• [PATCH] ARM: abstract atags parsing   Nicolas Pitre
• [PATCH] ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via /dev/mem   Nicolas Pitre
• [PATCH 6/8] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Christian Riesch
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Alan Cox
• [PATCH] ARM: abstract atags parsing   Russell King - ARM Linux
• [PATCH 1/6] ARM: add PrimeCell generic DMA to PL022 v10   Dan Williams
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Christian Riesch
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Alan Cox
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   john stultz
• [PATCH] ARM: abstract atags parsing   Grant Likely
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   john stultz
• [PATCH 1/8] posix clocks: introduce a syscall for clock tuning.   Benjamin Herrenschmidt
• [PATCH 1/8] posix clocks: introduce a syscall for clock tuning.   Thomas Gleixner
• [GIT PULL] omap2 sparse fixes   Tony Lindgren
• [PATCH 03/10] OMAP3: PM: move device-specific special cases from PM core into CPUidle   Paul Walmsley
• [PATCH] ARM: abstract atags parsing   Ben Dooks
• [RESEND PATCH] serial: samsung: fix device name   Ben Dooks
• Regarding hw irq to Linux irq mapping on ARM   Ben Dooks
• [PATCH 03/10] OMAP3: PM: move device-specific special cases from PM core into CPUidle   Kevin Hilman
• [PATCH] ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LL   Ben Dooks
• [PATCH 03/10] OMAP3: PM: move device-specific special cases from PM core into CPUidle   Kevin Hilman
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Tony Lindgren
• [GIT PULL] OMAP: hwmod fixes and improvements for 2.6.37   Tony Lindgren
• [PATCH 00/14] omap sram, omap4 control module and es2.0 support   Tony Lindgren
• [PATCH 1/8] posix clocks: introduce a syscall for clock tuning.   Benjamin Herrenschmidt
• [PATCH] ARM: abstract atags parsing   Nicolas Pitre
• [PATCH 00/11] omap patches for review for v2.6.37 merge window   Tony Lindgren
• [PATCH 01/11] omap2: fix assorted compiler warnings   Tony Lindgren
• [PATCH 02/11] omap: n8x0: Cleanup i2c1 and menelaus registration   Tony Lindgren
• [PATCH 03/11] omap: n8x0: Register i2c2 and add board info with tlv320aic3xfor N810   Tony Lindgren
• [PATCH 04/11] omap: n8x0: Mux i2s codec port pins for McBSP block   Tony Lindgren
• [PATCH 05/11] omap3: Remove non-existent config option   Tony Lindgren
• [PATCH 06/11] omap: usb: fix build warning   Tony Lindgren
• [PATCH 07/11] omap: crypto: updates to enable omap aes   Tony Lindgren
• [PATCH 08/11] omap: i2c: Avoid compilation error in case the header is included multiple times   Tony Lindgren
• [PATCH 09/11] omap: McBSP: Do not enable SRG in slave mode   Tony Lindgren
• [PATCH 10/11] omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and docleanups   Tony Lindgren
• [PATCH 11/11] omap: mmc: extended to pass host capabilities from board file   Tony Lindgren
• [PATCH 0/4] Adding support for esdhc on mx35/51   Zhu Richard-R65037
• [PATCH 1/2] OMAP: features: export symbol omap3_features   Omar Ramirez Luna
• [4-0] Serial patchs that upstream fsl i.MX MX51 sdhci driver   Richard Zhu
• [PATCH 1/4] sdhci-1: sdhci driver modifications when support FSL eSDHC   Richard Zhu
• [PATCH 2/4] esdhc-2 mx51: Modify the MSL codes when upstreaming fsl esdhc driver   Richard Zhu
• [PATCH 3/4] esdhc-3 esdhc: fsl esdhc driver based on sdhci driver   Richard Zhu
• [PATCH 4/4] esdhc-4 mx51: enable fsl esdhc driver   Richard Zhu
• Recall: [PATCH 4/4] esdhc-4 mx51: enable fsl esdhc driver   Zhu Richard-R65037
• Recall: [PATCH 1/4] sdhci-1: sdhci driver modifications when support FSL eSDHC   Zhu Richard-R65037
• Recall: [PATCH 3/4] esdhc-3 esdhc: fsl esdhc driver based on sdhci driver   Zhu Richard-R65037
• Recall: [PATCH 2/4] esdhc-2 mx51: Modify the MSL codes when upstreaming fsl esdhc driver   Zhu Richard-R65037
• [4-0] serial patches that enable the eSDHC on iMX51   Richard Zhu
• [PATCH 1/4] sdhci-1: sdhci driver modifications when support FSL eSDHC   Richard Zhu
• [PATCH 2/4] esdhc-2 mx51: Modify the MSL codes when upstreaming fsl esdhc driver   Richard Zhu
• [PATCH 3/4] esdhc-3 esdhc: fsl esdhc driver based on sdhci driver   Richard Zhu
• [PATCH 4/4] esdhc-4 mx51: enable fsl esdhc driver   Richard Zhu
• [PATCH 4/4] esdhc-4 mx51: enable fsl esdhc driver   Zhu Richard-R65037
• [PATCH] ARM: abstract atags parsing   Grant Likely
• [PATCH 00/14] omap sram, omap4 control module and es2.0 support   Shilimkar, Santosh
• Could it be a case of deadlock on SMP?   Andrew Yan-Pai Chen
• [PATCH 00/11] omap patches for review for v2.6.37 merge window   Jarkko Nikula
• [PATCH] Fixing ethernet driver compilation error for i.MX32 ADS board   Sascha Hauer
• [GIT PULL] omap: sram fixes and omap4 es2.0 support   Shilimkar, Santosh
• [PATCH 00/14] omap sram, omap4 control module and es2.0 support   Shilimkar, Santosh
• [PATCH 0/4] Adding support for esdhc on mx35/51   Wolfram Sang
• [RESEND PATCH] serial: samsung: fix device name   Darius Augulis
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Grant Likely
• [PATCH 1/4] Resources for U5500 mbox driver and modem irq handler   Stefan Nilsson XK
• [PATCH 00/12] OMAP: clock/CM/PRM/SCM updates for OMAP4 ES2, OMAP3 CORE DVFS fix: for 2.6.37   Paul Walmsley
• [PATCH 01/12] OMAP4: clocks: Update clock tree for ES2   Paul Walmsley
• [PATCH 02/12] OMAP4: clock: Fix clock names and align with hwmod names   Paul Walmsley
• [PATCH 03/12] OMAP4: clock: Add optional clock nodes   Paul Walmsley
• [PATCH 04/12] OMAP4: CM & PRM: Update PRCM register bitshifts and masks for ES2   Paul Walmsley
• [PATCH 05/12] OMAP4: PM: Define additional registers for ES2   Paul Walmsley
• [PATCH 06/12] OMAP4: powerdomain: Update DSS logic state for ES2   Paul Walmsley
• [PATCH 07/12] OMAP4: clocks: Fix ES2 clock issues   Paul Walmsley
• [PATCH 08/12] omap4: control: Add ctrl_pad_base to omap_globals   Paul Walmsley
• [PATCH 09/12] omap4: control: Add accessor api's for pad control module   Paul Walmsley
• [PATCH 10/12] omap4: control: Add the register definition headers   Paul Walmsley
• [PATCH 11/12] omap4: control: Fix the control module register accesses   Paul Walmsley
• [PATCH 12/12] omap3: Prevent SDRC deadlock when L3 is changing frequency   Paul Walmsley
• [PATCH 0/4] Adding support for esdhc on mx35/51   Zhu Richard-R65037
• [PATCH 2/3] dmaengine: add wrapper functions for dmaengine   Sascha Hauer
• [PATCH 1/3] dmaengine: add possibility for cyclic transfers   Sascha Hauer
• [PATCH 1/8] posix clocks: introduce a syscall for clock tuning.   Richard Cochran
• [RESEND PATCH] serial: samsung: fix device name   Simon Richter
• Could it be a case of deadlock on SMP?   Russell King - ARM Linux
• [RESEND PATCH] serial: samsung: fix device name   Russell King - ARM Linux
• [PATCH 1/8] posix clocks: introduce a syscall for clock tuning.   Richard Cochran
• [PATCH v2] mx35: Fix boot ROM hang in internal boot mode   John Ogness
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Richard Cochran
• [PATCH 6/8] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Richard Cochran
• [PATCH 0/4] Adding support for esdhc on mx35/51   Wolfram Sang
• [PATCH] mfd: regulator: max8998: BUCK1/2 control augmented by GPIO pins   Lukasz Majewski
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Uwe Kleine-König
• [PATCH] mfd: regulator: max8998: BUCK1/2 control augmented by GPIO pins   Mark Brown
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Michał Mirosław
• [PATCH 0/4] Adding support for esdhc on mx35/51   Zhu Richard-R65037
• Could it be a case of deadlock on SMP?   Andrew Yan-Pai Chen
• [PATCH 05/11] omap3: Remove non-existent config option   Felipe Contreras
• [PATCH v2] mx35: Fix boot ROM hang in internal boot mode   Hans J. Koch
• [PATCH 0/4] Adding support for esdhc on mx35/51   Wolfram Sang
• [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe   Datta, Shubhrajyoti
• PXA270 audio problem   Marek Vasut
• [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe   G, Manjunath Kondaiah
• [PATCH 6/8] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Alan Cox
• [PATCH RESEND v4 1/4] omap3: nand: prefetch in irq mode support   Ghorai, Sukumar
• [PATCH v4] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Richard Cochran
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Richard Cochran
• [RFC] SoC name and revision in /proc/cpuinfo   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Alan Cox
• [RFC] SoC name and revision in /proc/cpuinfo   Russell King - ARM Linux
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Alan Cox
• [PATCH] mmc: failure of block read wait for long time   Ghorai, Sukumar
• [RFC] SoC name and revision in /proc/cpuinfo   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Alan Cox
• [PATCH 1/2] OMAP: features: export symbol omap3_features   Kevin Hilman
• Regarding hw irq to Linux irq mapping on ARM   Mark Brown
• [PATCH 05/11] omap3: Remove non-existent config option   Premi, Sanjeev
• [PATCH 1/2] OMAP: features: export symbol omap3_features   Paul Walmsley
• [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe   Datta, Shubhrajyoti
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Cory Maccarrone
• [PATCH 2/3] dmaengine: add wrapper functions for dmaengine   Dan Williams
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Russell King - ARM Linux
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Michał Mirosław
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Grant Likely
• [PATCH v3 2/4] omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set   kishore kadiyala
• [PATCH v3 1/4] omap4 hsmmc: Adding card detect support for MMC1   kishore kadiyala
• [RESEND PATCH] serial: samsung: fix device name   Paulius Zaleckas
• [PATCH 0/3] OMAP: hwmod/device/CM: bug fixes for 2.6.37   Paul Walmsley
• [PATCH 1/3] OMAP: omap_device: Fix to support multiple hwmods for a single device   Paul Walmsley
• [PATCH 2/3] OMAP4: PM: Declare idle modules as functional too   Paul Walmsley
• [PATCH 3/3] OMAP: hwmod: Set autoidle after smartidle during _sysc_enable   Paul Walmsley
• [PATCH 1/2] OMAP: features: export symbol omap3_features   Nishanth Menon
• [PATCH 1/2] OMAP: features: export symbol omap3_features   Paul Walmsley
• [PATCH v4 0/4] omap4 hsmmc: Card detect and Register offset handling   kishore kadiyala
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   kishore kadiyala
• [PATCH v4 2/4] omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set   kishore kadiyala
• [PATCH v4 3/4] omap4 hsmmc: Register offset handling   kishore kadiyala
• [PATCH v4 4/4] omap4 hsmmc: Update ocr mask for MMC2 for regulator to use   kishore kadiyala
• [PATCH 1/2] OMAP: features: export symbol omap3_features   Paul Walmsley
• [PATCH 1/2] OMAP: features: export symbol omap3_features   Nishanth Menon
• [PATCH 1/8] posix clocks: introduce a syscall for clock tuning.   john stultz
• [PATCH 1/1] ARM Orion: added Buffalo LS-CHL support   Ash Hughes
• [PATCH 00/11] omap patches for review for v2.6.37 merge window   Tony Lindgren
• [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver   Uwe Kleine-König
• [PATCH] ARM: s3c2442: gta02: Fix usage gpio bank j pin definitions   Lars-Peter Clausen
• [PATCH 1/1] ARM Orion: added Buffalo LS-CHL support   Nicolas Pitre
• [PATCH v7 4/6] OMAP4: hwmod data: Add watchdog timer   Kevin Hilman
• [RFC] SoC name and revision in /proc/cpuinfo   Bryan Huntsman
• [PATCH v4] power: introduce library for device-specific OPPs   Paul E. McKenney
• [GIT PULL] omap2 sparse fixes   G, Manjunath Kondaiah
• [PATCH v4] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH v4] power: introduce library for device-specific OPPs   Paul E. McKenney
• [PATCH 1/8] posix clocks: introduce a syscall for clock tuning.   Benjamin Herrenschmidt
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Tony Lindgren
• [GIT PULL] omap: sram fixes and omap4 es2.0 support   Tony Lindgren
• [PATCH v3 0/5] LogicPD minimal board support for LV_SOM and Torpedo   Tim Nordell
• [PATCH v3 1/5] Adding LogicPD OMAP3 board support   Tim Nordell
• [PATCH v3 2/5] ARM: OMAP3LOGIC: Adding SDMMC support   Tim Nordell
• [PATCH v3 3/5] ARM: OMAP3: Add generic smsc911x support when connected to GPMC   Tim Nordell
• [PATCH v3 4/5] ARM: OMAP3LOGIC: Added SMSC Ethernet board support   Tim Nordell
• [PATCH v3 5/5] ARM: OMAP3LOGIC: Adding low-level debug support   Tim Nordell
• RFC: mixing device idle and CPUidle or non-atomic idle notifiers   Kevin Hilman
• [GIT PULL] omap2 sparse fixes   Tony Lindgren
• [PATCH 0/7] omap board changes for v2.6.37 merge window   Tony Lindgren
• [PATCH 1/7] hmc5843: Digital compass board file   Tony Lindgren
• [PATCH 2/7] omap: Beagle: revision detection   Tony Lindgren
• [PATCH 3/7] omap: Beagle: only Cx boards use pin 23 for write protect   Tony Lindgren
• [PATCH 4/7] omap: Beagle: no gpio_wp pin connection on xM   Tony Lindgren
• [PATCH 5/7] Adding i2c eeprom driver to read EDID   Tony Lindgren
• [PATCH 6/7] omap: 4430sdp board support for proximity sensor   Tony Lindgren
• [PATCH 7/7] omap4: board-omap4panda: adding leds status1 and status2   Tony Lindgren
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   Tony Lindgren
• pxa3xx_nand issues   Haojian Zhuang
• [GIT PULL] omap2 sparse fixes   G, Manjunath Kondaiah
• [GIT PULL] OMAP: clock/CM/PRM/SCM updates for OMAP4 ES2, OMAP3 CORE DVFS fix: for 2.6.37   Paul Walmsley
• [PATCH] ARM: SECCOMP support   Russell King - ARM Linux
• [PATCH v7 4/6] OMAP4: hwmod data: Add watchdog timer   Varadarajan, Charulatha
• [PATCH 05/11] omap3: Remove non-existent config option   Felipe Contreras
• [PATCH] ARM: SECCOMP support   Nicolas Pitre
• [PATCH 0/6] omap3: Various fixes and improvements for IGEP v2 board.   Enric Balletbo i Serra
• [PATCH 1/6] omap3: Add GPIO's for external VBUS power switch and overcurrent detect on IGEP v2 board.   Enric Balletbo i Serra
• [PATCH 2/6] omap3: fix and improve the LED handling on IGEP v2 board.   Enric Balletbo i Serra
• [PATCH 3/6] omap3: Introduce function to detect the IGEP v2 hardware revision.   Enric Balletbo i Serra
• [PATCH 4/6] omap3: Fix handling some GPIO's for WLAN-BT combo on IGEP v2.   Enric Balletbo i Serra
• [PATCH 5/6] omap3: Add i2c eeprom driver to read EDID on IGEP v2.   Enric Balletbo i Serra
• [PATCH 6/6] omap3: Remove VMMC2 regulator on IGEP v2 because it's not used.   Enric Balletbo i Serra
• [PATCH] ARM: SECCOMP support   Russell King - ARM Linux
• [PATCH] ARM: SECCOMP support   Nicolas Pitre
• [PATCH v4] power: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH] sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove   Chris Ball
• Regarding hw irq to Linux irq mapping on ARM   Ben Dooks
• [PATCH 2/5] h1940: fix h1940-bluetooth compilation   Ben Dooks
• [PATCH 2/5] h1940: fix h1940-bluetooth compilation   Ben Dooks
• [PATCH 3/5] h1940: implement mmc_power function   Ben Dooks
• [PATCH v2 1/3] rx1950: add battery device   Ben Dooks
• [PATCH v4] power: introduce library for device-specific OPPs   Paul E. McKenney
• [PATCH] ARM: pxa: reduce the scope of get_clk_frequency_khz()   Eric Miao
• [PATCH 2/2] ARM: pxa: reduce the scope of get_memclk_frequency_10khz()   Eric Miao
• [PATCH 1/1] ARM: mmp: update cpuid of pxa168 and pxa910   Eric Miao
• [PATCH 1/1] ARM: mmp: update cpuid of pxa168 and pxa910   Haojian Zhuang
• [GIT PULL] OMAP: hwmod/device/CM: bug fixes for 2.6.37   Paul Walmsley
• [PATCH 1/1] ARM: mmp: update cpuid of pxa168 and pxa910   Haojian Zhuang
• [PATCH 3/4] esdhc-3 esdhc: fsl esdhc driver based on sdhci driver   zhangfei gao
• [PATCH 1/4] mmc: sdhci-pltfm: Add structure for host-specific data   zhangfei gao
• [PATCH 1/4] mmc: sdhci-pltfm: Add structure for host-specific data   Anton Vorontsov
• [PATCH] sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove   Kyungmin Park
• [PATCH] [ARM] pxa/cm-x2xx: remove duplicate call to pxa27x_init_irq   Mike Rapoport
• [PATCH] [ARM] pxa/cm-x2xx: remove duplicate call to pxa27x_init_irq   Eric Miao
• [PATCH 1/1] ARM: mmp: update cpuid of pxa168 and pxa910   Eric Miao
• pxa3xx_nand issues   Lei Wen
• [PATCH] sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove   Chris Ball
• [PATCH] ARM: S5PV210: Add Torbreck board support   Kyuho Choi
• [PATCH v3 1/3] rx1950: add battery device   Vasily Khoruzhick
• [PATCH v2 3/5] h1940: implement mmc_power function   Vasily Khoruzhick
• [PATCH v3] i2c: QUP based bus driver for Qualcomm MSM chipsets   Ben Dooks
• [PATCH v2 4/5] h1940: Fix backlight and LCD power functions   Ben Dooks
• [PATCH 0/3] Common struct clk implementation, v7   Ben Dooks
• [PATCH] s3c: add support for mini6410   Ben Dooks
• [PATCH] ARM: s3c2442: gta02: Fix usage gpio bank j pin definitions   Ben Dooks
• [RESEND PATCH] serial: samsung: fix device name   Ben Dooks
• [RESEND PATCH] serial: samsung: fix device name   Ben Dooks
• [PATCH] ARM: s3c2442: gta02: Fix usage gpio bank j pin definitions   Lars-Peter Clausen
• [PATCH] ARM: S5PV210: Add Torbreck board support   Kyungmin Park
• [PATCH] drivers: lcd: Add support ld9040 amoled panel driver   Donghwa Lee
• [PATCH] sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove   Marek Szyprowski
• [PATCH v3 4/5] h1940: Fix backlight and LCD power functions   Vasily Khoruzhick
• [PATCH v3 5/5] h1940: add UDA1380 to i2c devices list   Vasily Khoruzhick
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   kishore kadiyala
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   kishore kadiyala
• [RESEND PATCH] serial: samsung: fix device name   Paulius Zaleckas
• [RESEND PATCH] serial: samsung: fix device name   Darius Augulis
• [PATCH 1/2] ARM: Samsung: S5PC110: Place the common SPARSEMEM at CPU_S5PV210   Kyungmin Park
• [PATCH] ARM: Samsung: S5PC210: Place the common SPARSEMEM at CPU_S5PV310   Kyungmin Park
• [PATCH v3 0/3] [ARM] tegra: PCI Express support   Mike Rapoport
• [PATCH v3 1/3] [ARM] tegra: add PCI Express clocks   Mike Rapoport
• [PATCH v3 2/3] [ARM] tegra: add PCI Express support   Mike Rapoport
• [PATCH v3 3/3] [ARM] tegra: harmony: enable PCI Express   Mike Rapoport
• mixing device idle and CPUidle or non-atomic idle notifiers   Nayak, Rajendra
• [PATCH] ARM: S5PV210: Add Torbreck board support   최규호
• [PATCH] ARM: S5PV210: Add Torbreck board support   Kyungmin Park
• [PATCH 05/11] omap3: Remove non-existent config option   Marathe, Yogesh
• [PATCH v2 07/10] TWL CORE: Fix sparse warning   Samuel Ortiz
• [PATCH v2 08/10] TWL IRQ: Fix fucntion declaration warnings   Samuel Ortiz
• pxa3xx_nand issues   pieterg
• pxa3xx_nand issues   pieterg
• pxa3xx_nand issues   Lei Wen
• [PATCH v3 0/5] mfd: regulator: max8998: BUCK1/2 control augmented by GPIO pins   Lukasz Majewski
• [PATCH v3 1/5] mfd: regulator: max8998: separate set_voltage for ldo and buck   Lukasz Majewski
• [PATCH v3 2/5] mfd: regulator: max8998: Support for ICs compliant with max8998   Lukasz Majewski
• [PATCH v3 3/5] mfd: regulator: max8998: BUCK1/2 internal voltages and indexes defined   Lukasz Majewski
• [PATCH v3 4/5] mfd: regulator: max8998: voltages and GPIOs defined at platform data structure   Lukasz Majewski
• [PATCH v3 5/5] mfd: regulator: max8998: BUCK1/2 voltage change with use of GPIOs   Lukasz Majewski
• [PATCH] KS8695: make add_preferred_console() and device name configurable   Yegor Yefremov
• [PATCH v2 08/10] TWL IRQ: Fix fucntion declaration warnings   G, Manjunath Kondaiah
• [PATCH] ARM: kprobes-decode: add support for MOVW instruction   Will Deacon
• [PATCH v5 0/5] nand prefetch-irq support and ecc layout chanage   Sukumar Ghorai
• [PATCH v5 1/5] omap gpmc: enable irq mode in gpmc   Sukumar Ghorai
• [PATCH v5 2/5] omap3: nand: prefetch in irq mode support   Sukumar Ghorai
• [PATCH v5 3/5] omap3: nand: configurable fifo threshold to gain the throughput   Sukumar Ghorai
• [PATCH v5 4/5] omap: nand: ecc layout select from board file   Sukumar Ghorai
• [PATCH v5 5/5] omap: nand: making ecc layout as compatible with romcode ecc   Sukumar Ghorai
• [GIT PULL] omap2 sparse fixes   G, Manjunath Kondaiah
• [PATCH v2 08/10] TWL IRQ: Fix fucntion declaration warnings   G, Manjunath Kondaiah
• imx patches for 2.6.37   Uwe Kleine-König
• [PATCH 01/40] ARM: imx: remove #ifdefery for unmerged flexcan driver   Uwe Kleine-König
• [PATCH 02/40] ARM: imx: ehci: use void __iomem * to hold i/o addresses   Uwe Kleine-König
• [PATCH 03/40] ARM: mx5/mx51_babbage: fix compiler warnings   Uwe Kleine-König
• [PATCH 04/40] ARM: mx5/mx51_babbage: don't use PHYS_OFFSET   Uwe Kleine-König
• [PATCH 05/40] ARM: mx27_defconfig: enable switches used in mx27 code   Uwe Kleine-König
• [PATCH 06/40] ARM: mx3_defconfig: add new machine MACH_EUKREA_CPUIMX35   Uwe Kleine-König
• [PATCH 07/40] ARM: remove mx31pdk_defconfig   Uwe Kleine-König
• [PATCH 08/40] ARM: mx51_defconfig: add new boards MACH_MX51_3DS and MACH_EUKREA_CPUIMX51   Uwe Kleine-König
• [PATCH 09/40] ARM: mx51: clean up mx51 header   Uwe Kleine-König
• [PATCH 10/40] ARM: mx51: fix naming of spi related defines   Uwe Kleine-König
• [PATCH 11/40] ARM: mx51: use IMX_IO_ADDRESS to define MX51_IO_ADDRESS   Uwe Kleine-König
• [PATCH 12/40] ARM: imx: change the way spi-imx devices are registered   Uwe Kleine-König
• [PATCH 13/40] ARM: imx: change the way imx-uarts are registered   Uwe Kleine-König
• [PATCH 14/40] ARM: imx: dynamically allocate imx-ssi devices   Uwe Kleine-König
• pxa3xx_nand issues   pieterg
• [PATCH 15/40] ARM: imx: reorganize imx-i2c device registration to use a struct per SoC   Uwe Kleine-König
• [PATCH 16/40] ARM: mx5: dynamically register imx-i2c devices   Uwe Kleine-König
• [PATCH 17/40] ARM: imx: fix name of macros to add imx-i2c devices   Uwe Kleine-König
• [PATCH 18/40] spi/imx: default to m on platforms that have such devices   Uwe Kleine-König
• [PATCH 19/40] spi/imx: convert driver to use platform ids   Uwe Kleine-König
• [PATCH 20/40] spi/imx: get rid of more ifs depending on the used cpu   Uwe Kleine-König
• [PATCH 21/40] spi/imx: save the spi chip select in config struct, not the gpio to use   Uwe Kleine-König
• [PATCH 22/40] spi/imx: add support for imx51's eCSPI and CSPI   Uwe Kleine-König
• [PATCH 23/40] ARM: imx: use platform ids for spi_imx devices   Uwe Kleine-König
• [PATCH 24/40] ARM: mx5: add spi_imx device registration   Uwe Kleine-König
• [PATCH 25/40] ARM: mx5/clock-mx51: refactor ccgr callbacks to use common code   Uwe Kleine-König
• [PATCH 26/40] ARM: mx5/clock-mx51: new macro that defines a clk with all members   Uwe Kleine-König
• [PATCH 27/40] ARM: mx5/clock-mx51: add spi clocks   Uwe Kleine-König
• [PATCH 28/40] ARM: mx5/iomux-mx51: add iomux definitions for eCSPI2 on the imx51_3ds board   Uwe Kleine-König
• [PATCH 29/40] ARM: mx5/mx51_3ds: add eCSPI2 support on the imx51_3ds board   Uwe Kleine-König
• [PATCH 30/40] ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stage   Uwe Kleine-König
• [PATCH 31/40] ARM: mx5/iomux-mx51: Add SPI controller pads   Uwe Kleine-König
• [PATCH 32/40] ARM: mx5/iomux-mx51: Add aud3 primary function defines   Uwe Kleine-König
• [PATCH 33/40] ARM: mx5/iomux-mx51: Fix input path of some pins in gpio mode   Uwe Kleine-König
• [PATCH 34/40] ARM: mx5: Add Nand clock support   Uwe Kleine-König
• [PATCH 35/40] ARM: mx51: dynamically register imx-uart devices   Uwe Kleine-König
• [PATCH 36/40] ARM: mx51: add imx-ssi devices   Uwe Kleine-König
• [PATCH 37/40] ARM: mx51: Add audmux support   Uwe Kleine-König
• [PATCH 38/40] ARM: imx: reorganize nand registration to use a struct   Uwe Kleine-König
• [PATCH 39/40] ARM: mx5: dynamically register mxc-nand device   Uwe Kleine-König
• [PATCH 40/40] ARM: mx5: clock-imx51: make *ipg clocks secondary clocks of their corresponding peripheral clocks   Uwe Kleine-König
• [PATCH v5 5/5] omap: nand: making ecc layout as compatible with romcode ecc   Premi, Sanjeev
• [PATCH 3/3] added support for "run twice" mem2mem transfers   Tobias Wirtl (none)
• [PATCH v5 5/5] omap: nand: making ecc layout as compatible with romcode ecc   Ghorai, Sukumar
• [GIT PULL] omap2 sparse fixes   Russell King - ARM Linux
• [PATCH RESEND v5 0/5] nand prefetch-irq support and ecc layout chanage   Sukumar Ghorai
• [PATCH RESEND v5 1/5] omap gpmc: enable irq mode in gpmc   Sukumar Ghorai
• [PATCH RESEND v5 2/5] omap3: nand: prefetch in irq mode support   Sukumar Ghorai
• [PATCH RESEND v5 3/5] omap3: nand: configurable fifo threshold to gain the throughput   Sukumar Ghorai
• [PATCH RESEND v5 4/5] omap: nand: ecc layout select from board file   Sukumar Ghorai
• [PATCH RESEND v5 5/5] omap: nand: making ecc layout as compatible with romcode ecc   Sukumar Ghorai
• [PATCH 33/40] ARM: mx5/iomux-mx51: Fix input path of some pins in gpio mode   Lothar Waßmann
• [PATCH v4] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH 31/40] ARM: mx5/iomux-mx51: Add SPI controller pads   Uwe Kleine-König
• [PATCH v4] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH 33/40] ARM: mx5/iomux-mx51: Fix input path of some pins in gpio mode   Sascha Hauer
• [PATCH v2 08/10] TWL IRQ: Fix fucntion declaration warnings   Samuel Ortiz
• [PATCH 33/40] ARM: mx5/iomux-mx51: Fix input path of some pins in gpio mode   Uwe Kleine-König
• [PATCH 00/13 v3] OMAP: Serial: Add omap-serial driver with platform support   Govindraj.R
• [PATCH 01/13 v3] OMAP4: UART: Add uart1-4 hwmods data for omap4   Govindraj.R
• [PATCH 02/13 v3] OMAP2/3: UART: add omap_hwmod data for UARTs 1-4   Govindraj.R
• [PATCH 03/13 v3] OMAP: UART: omap_device converions, remove implicit 8520 assumptions   Govindraj.R
• [PATCH 04/13 v3] OMAP2: UART: remove set_uart_globals   Govindraj.R
• [PATCH 05/13 v3] OMAP: UART: don't do automatic bus-level suspend/resume   Govindraj.R
• [PATCH 06/13 v3] OMAP: UART: use non-locking versions of hwmod enable/idle functions   Govindraj.R
• [PATCH 07/13 v3] OMAP clock: Add uart4_ick/fck definitions for 3630   Govindraj.R
• [PATCH 08/13 v3] OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs   Govindraj.R
• [PATCH 09/13 v3] OMAP3: PM: Add prepare idle and resume idle call for uart4   Govindraj.R
• [PATCH 10/13 v3] OMAP3: serial: Fix uart4 handling for 3630   Govindraj.R
• [PATCH 11/13 v3] serial: Add OMAP high-speed UART driver   Govindraj.R
• [PATCH 12/13 v3] OMAP: SERIAL: Enable omap-serial driver in Kconfig   Govindraj.R
• [PATCH 13/13 v3] OMAP3: SERIAL: Initialize all omap-uarts for zoom boards   Govindraj.R
• [GIT PULL] omap2 sparse fixes   G, Manjunath Kondaiah
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Christoph Lameter
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Christoph Lameter
• [PATCH 05/11] omap3: Remove non-existent config option   Felipe Contreras
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Christoph Lameter
• [PATCH v3 1/5] mfd: regulator: max8998: separate set_voltage for ldo and buck   Mark Brown
• [PATCH v3 2/5] mfd: regulator: max8998: Support for ICs compliant with max8998   Mark Brown
• [PATCH v3 3/5] mfd: regulator: max8998: BUCK1/2 internal voltages and indexes defined   Mark Brown
• [PATCH v4 0/4] LogicPD minimal board support for LV_SOM and Torpedo   Tim Nordell
• [PATCH v4 1/4] Adding LogicPD OMAP3 board support   Tim Nordell
• [PATCH v4 2/4] ARM: OMAP3LOGIC: Adding SDMMC support   Tim Nordell
• [PATCH v4 3/4] ARM: OMAP3: Add generic smsc911x support when connected to GPMC   Tim Nordell
• [PATCH v4 4/4] ARM: OMAP3LOGIC: Added SMSC Ethernet board support   Tim Nordell
• [PATCH v3 5/5] mfd: regulator: max8998: BUCK1/2 voltage change with use of GPIOs   Mark Brown
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   M. Warner Losh
• [PATCH 05/11] omap3: Remove non-existent config option   Tony Lindgren
• [PATCH 05/11] omap3: Remove non-existent config option   Kanigeri, Hari
• [PATCH] ARM: kprobes-decode: add support for MOVW instruction   Nicolas Pitre
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Alan Cox
• imx patches for 2.6.37   Philippe Rétornaz
• [PATCH] ARM: kprobes-decode: add support for MOVW instruction   Will Deacon
• Regarding hw irq to Linux irq mapping on ARM   Mark Brown
• pxa3xx_nand issues   pieterg
• imx patches for 2.6.37   Uwe Kleine-König
• [PATCH v3 0/5] mfd: regulator: max8998: BUCK1/2 control augmented by GPIO pins   Liam Girdwood
• [PATCH v3 0/5] mfd: regulator: max8998: BUCK1/2 control augmented by GPIO pins   Liam Girdwood
• [PATCH v3 4/5] mfd: regulator: max8998: voltages and GPIOs defined at platform data structure   Samuel Ortiz
• [PATCH v3 0/5] mfd: regulator: max8998: BUCK1/2 control augmented by GPIO pins   Samuel Ortiz
• [PATCH v4] power: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH 6/6] sh: oprofile: Use perf-events oprofile backend   Matt Fleming
• [PATCH v3 0/5] Convert I2C driver to use omap_device/runtime PM   Kevin Hilman
• [GIT PULL v2] OMAP: clock/CM/PRM/SCM updates for OMAP4 ES2, OMAP3 CORE DVFS fix: for 2.6.37   Paul Walmsley
• [GIT PULL v2] OMAP: clock/CM/PRM/SCM updates for OMAP4 ES2, OMAP3 CORE DVFS fix: for 2.6.37   Tony Lindgren
• [PATCH 11/13 v3] serial: Add OMAP high-speed UART driver   Kevin Hilman
• [PATCH 11/13 v3] serial: Add OMAP high-speed UART driver   Greg KH
• [PATCH 11/13 v3] serial: Add OMAP high-speed UART driver   Kevin Hilman
• [PATCH 6/6] sh: oprofile: Use perf-events oprofile backend   Robert Richter
• Robust futex on SMP   Daniel Walker
• [PATCH 6/6] sh: oprofile: Use perf-events oprofile backend   Matt Fleming
• [PATCH 3/5] omap3: cm-t3517: add support for usb host.   Tony Lindgren
• [PATCH 0/6] omap3: Various fixes and improvements for IGEP v2 board.   Tony Lindgren
• [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's   Ben Dooks
• [PATCH 6/6] sh: oprofile: Use perf-events oprofile backend   Robert Richter
• [PATCH v2] ARM: MM: bugfix: initialize spinlock for init_mm.context   MyungJoo Ham
• [PATCH] ARM: S5PV310: Optimize interrupt source searching code   Kukjin Kim
• [PATCH 1/3 RESEND] arm: remove cast from void*   matt mooney
• [PATCH v3 0/3] ARM: S5PV210: Add MIPI-DSI support   Donghwa Lee
• [PATCH v3 1/3] S5PV210: FB: support command mode   Donghwa Lee
• [PATCH v3 2/3] S5PV210: MIPI-DSI: add machine specific header files   Donghwa Lee
• [PATCH v3 3/3] S5PV210: add MIPI-DSI driver   Donghwa Lee
• [PATCH 0/3] Fixing udelay() on SMP (and non-SMP too)   Stephen Boyd
• [PATCH 1/3] [ARM] Translate delay.S into (mostly) C   Stephen Boyd
• [PATCH 2/3] [ARM] Allow machines to override __delay()   Stephen Boyd
• [PATCH 3/3] [ARM] Implement a timer based __delay() loop   Stephen Boyd
• [PATCH v2 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Jeongbae Seo
• [PATCH v2] ARM: S5PV310: Optimize interrupt source searching code   Kukjin Kim
• [PATCH v2] ARM: MM: bugfix: initialize spinlock for init_mm.context   Kukjin Kim
• [PATCH v2 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Kukjin Kim
• [PATCH] ARM: S5P: Remove the unused clk_arm clock from plat-s5p   Kukjin Kim
• [PATCH] ARM: S5PC210: Use nr_irqs instead of NR_IRQS   Kyungmin Park
• [PATCH] ARM: S5PV210: Add Torbreck board support   Kukjin Kim
• [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's   Nayak, Rajendra
• [PATCH] ARM: S5PV210: Add Torbreck board support   Kyungmin Park
• [PATCH] s3c: add support for mini6410   Kukjin Kim
• [PATCHv2 7/7] ARM: S5PC110: add support for MMC regulators on Goni board   Kukjin Kim
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Richard Cochran
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Richard Cochran
• [PATCH] s3c: add support for mini6410   Darius Augulis
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   kishore kadiyala
• [PATCH 11/13 v3] serial: Add OMAP high-speed UART driver   Alan Cox
• [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's   Nayak, Rajendra
• [PATCHv2 1/7] ARM: S5PC110: update framebuffer setup information for Goni   Kukjin Kim
• [PATCHv2 2/7] ARM: S5PC110: fb setup for Goni - remove pixel clock   Kukjin Kim
• [PATCHv2 3/7] ARM: S5PC110: add support for S6E63M0 LCD controller on Goni board   Kukjin Kim
• [PATCHv2 0/7] PWM core driver for pwm based led and backlight driver   Arun Murthy
• [PATCH 1/7] pwm: Add pwm core driver   Arun Murthy
• [PATCH 2/7] backlight:pwm: add an element 'name' to platform data   Arun Murthy
• [PATCH 3/7] leds: pwm: add a new element 'name' to platform data   Arun Murthy
• [PATCH 4/7] pwm: Align existing pwm drivers with pwm-core driver   Arun Murthy
• [PATCH 5/7] platform: Update the pwm based led and backlight platform data   Arun Murthy
• [PATCH 7/7] pwm: Modify backlight and led Kconfig aligning to pwm core   Arun Murthy
• [PATCHv2 4/7] ARM: S5PC110: Add si470x radio device to the GONI board   Kukjin Kim
• [PATCH 11/13 v3] serial: Add OMAP high-speed UART driver   Greg KH
• [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's   Russell King - ARM Linux
• [PATCHv2 5/7] ARM: S5PV210: Enable USB HSOTG gadget build   Kukjin Kim
• [PATCHv2 6/7] ARM: S5PC110: add support for otg usb gadget on Goni board   Kukjin Kim
• [PATCH v3] regulators: add support max8952 regulator   Kukjin Kim
• [PATCH 3/7] leds: pwm: add a new element 'name' to platform data   Eric Miao
• [PATCH 6/7] pwm: move existing pwm driver to drivers/pwm   Eric Miao
• [PATCH v3] regulators: add support max8952 regulator   Kyungmin Park
• [GIT PULL] omap2 sparse fixes   G, Manjunath Kondaiah
• [PATCH 1/7] pwm: Add pwm core driver   Vasily Khoruzhick
• [PATCH 6/6] sh: oprofile: Use perf-events oprofile backend   Matt Fleming
• [PATCH 3/7] leds: pwm: add a new element 'name' to platform data   Arun MURTHY
• [PATCH 1/7] pwm: Add pwm core driver   Vasily Khoruzhick
• [PATCH 1/7] pwm: Add pwm core driver   Hemanth V
• [PATCH] s3c: add support for mini6410   Kukjin Kim
• [PATCH 1/7] pwm: Add pwm core driver   Lars-Peter Clausen
• [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's   Nayak, Rajendra
• [PATCH 4/7] pwm: Align existing pwm drivers with pwm-core driver   Lars-Peter Clausen
• [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support   Linus Walleij
• Robust futex on SMP   Mikael Pettersson
• [PATCH 1/7] pwm: Add pwm core driver   Hemanth V
• [PATCH 1/7] pwm: Add pwm core driver   Lars-Peter Clausen
• [PATCH 4/7] pwm: Align existing pwm drivers with pwm-core driver   Lars-Peter Clausen
• [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support   Sergei Shtylyov
• [PATCH 0/7] PWM core driver for pwm based led and backlight driver   Arun Murthy
• [PATCH 1/7] pwm: Add pwm core driver   Arun Murthy
• [PATCH 2/7] backlight:pwm: add an element 'name' to platform data   Arun Murthy
• [PATCH 3/7] leds: pwm: add a new element 'name' to platform data   Arun Murthy
• [PATCH 4/7] pwm: Align existing pwm drivers with pwm-core driver   Arun Murthy
• [PATCH 5/7] platform: Update the pwm based led and backlight platform data   Arun Murthy
• [PATCH 6/7] pwm: move existing pwm driver to drivers/pwm   Arun Murthy
• [PATCH 7/7] pwm: Modify backlight and led Kconfig aligning to pwm core   Arun Murthy
• [PATCH 1/7] pwm: Add pwm core driver   Hemanth V
• [PATCH 3/7] leds: pwm: add a new element 'name' to platform data   Sergei Shtylyov
• [PATCHv2 0/4] Improve fallback LPJ calculation   Phil Carmody
• [PATCH 1/4] calibrate: extract fall-back calculation into own helper   Phil Carmody
• [PATCH 2/4] calibrate: home in on correct lpj value more quickly   Phil Carmody
• [PATCH 3/4] calibrate: retry with wider bounds when converge seems to fail   Phil Carmody
• [PATCH 4/4] DO NOT INTEGRATE: test-only timing   Phil Carmody
• [PATCH 3/7] leds: pwm: add a new element 'name' to platform data   Arun MURTHY
• linux-2.6.36-rc4 problems booting rootfs from SD card   dylan cristiani
• [PATCH 1/2] ARM: Samsung: S5PC110: Place the common SPARSEMEM at CPU_S5PV210   Kukjin Kim
• [PATCH] ARM: S5PV210: Add Torbreck board support   최규호
• [PATCH 0/4] Updata S5PC110 GONI board   Kukjin Kim
• [PATCH 0/4] Updata S5PC110 GONI board   Marek Szyprowski
• [PATCH 0/4] Updata S5PC110 GONI board   Kukjin Kim
• [PATCHv2 3/7] ARM: S5PC110: add support for S6E63M0 LCD controller on Goni board   Marek Szyprowski
• [PATCH] ARM: S5PV310: Optimize interrupt source searching code   Sergei Shtylyov
• [PATCH 1/7] pwm: Add pwm core driver   Hemanth V
• [PATCH] ARM: S5PV310: Optimize interrupt source searching code   Michał Nazarewicz
• Recall: [PATCH 4/4] esdhc-4 mx51: enable fsl esdhc driver   Lothar Waßmann
• [PATCH 1/7] pwm: Add pwm core driver   Samuel Ortiz
• [PATCHv2 4/7] ARM: S5PC110: Add si470x radio device to the GONI board   Marek Szyprowski
• Issue in using mmap on ARM target   Lothar Waßmann
• [PATCH] ARM: S5PV310: Optimize interrupt source searching code   Kukjin Kim
• [PATCH v3] ARM: S5PC110: add support for S6E63M0 LCD controller on Goni board   Marek Szyprowski
• High Latency in PL310 L2 cache maintenance operations   hashim alig
• [PATCH 1/7] pwm: Add pwm core driver   Felipe Balbi
• [PATCH] [ARM] Introduce patching of phys_to_virt and vice versa   Eric Miao
• [PATCH 1/6] ARM: Samsung: Add common s5p gpio interrupt support   Kukjin Kim
• linux-2.6.36-rc4 problems booting rootfs from SD card   dylan cristiani
• [PATCHv2 4/7] ARM: S5PC110: Add si470x radio device to the GONI board   Kukjin Kim
• [PATCH] ARM: S5PV310: Optimize interrupt source searching code   Kukjin Kim
• linux-2.6.36-rc4 problems booting rootfs from SD card   Vasily Khoruzhick
• [PATCH 1/6] ARM: Samsung: Add common s5p gpio interrupt support   Marek Szyprowski
• [PATCH 0/7] PrimeCell Generic DMA v12   Linus Walleij
• [PATCH 1/7] SPI: add PrimeCell generic DMA to PL022 v12   Linus Walleij
• [PATCH 2/7] ARM: add PrimeCell generic DMA to PL011 v12   Linus Walleij
• [PATCH 3/7] ARM: add PrimeCell generic DMA to MMCI/PL180 v12   Linus Walleij
• [PATCH 4/7] ARM: config U300 PL180 PL011 PL022 for DMA v12   Linus Walleij
• [PATCH 5/7] ARM: config Ux500 PL011 PL022 PL180 for DMA v12   Linus Walleij
• [PATCH 6/7] ARM: config RealViews PL011 PL022 for DMA v12   Linus Walleij
• [PATCH 7/7] ARM: config Versatiles PL011 PL022 for DMA v12   Linus Walleij
• [PATCH 1/6] ARM: Samsung: Add common s5p gpio interrupt support   Kyungmin Park
• High Latency in PL310 L2 cache maintenance operations   Catalin Marinas
• High Latency in PL310 L2 cache maintenance operations   Catalin Marinas
• linux-2.6.36-rc4 problems booting rootfs from SD card   dylan cristiani
• [PATCH 1/6] ARM: add PrimeCell generic DMA to PL022 v10   Linus Walleij
• linux-2.6.36-rc4 problems booting rootfs from SD card   Ghorai, Sukumar
• linux-2.6.36-rc4 problems booting rootfs from SD card   Hein_Tibosch
• [PATCH] mmc: failure of block read wait for long time   Ghorai, Sukumar
• [PATCH 11/13 v3] serial: Add OMAP high-speed UART driver   Kevin Hilman
• [GIT PULL] omap2 sparse fixes   Tony Lindgren
• [PATCH v4 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's   Rajendra Nayak
• [GIT PULL] omap2 sparse fixes   G, Manjunath Kondaiah
• [PATCH] ARM: add cpu_idle_wait() to support CPUidle on SMP systems.   Kevin Hilman
• [PATCH] omap: Fix compile dependency to LEDS_CLASS   Tony Lindgren
• [PATCH 1/3 RESEND] arm: remove cast from void*   Tony Lindgren
• [PATCH v4 0/4] LogicPD minimal board support for LV_SOM and Torpedo   Tony Lindgren
• [PATCH 1/7] pwm: Add pwm core driver   Mark Brown
• [PATCH 2/7] backlight:pwm: add an element 'name' to platform data   Mark Brown
• [PATCH] [ARM] Introduce patching of phys_to_virt and vice versa   Nicolas Pitre
• [GIT PULL] omap2 sparse fixes   Tony Lindgren
• [PATCH] mmc: failure of block read wait for long time   Adrian Hunter
• [PATCH] mmc: failure of block read wait for long time   Ghorai, Sukumar
• [PATCH 0/2] OMAP2+: misc. defconfig cleanups for 2.6.37   Kevin Hilman
• [PATCH 1/2] OMAP2+: defconfig: disable CPUfreq   Kevin Hilman
• [PATCH 2/2] OMAP2+: defconfig: modularize bluetooth, audio and WLAN   Kevin Hilman
• linux-2.6.36-rc4 problems booting rootfs from SD card   Russell King - ARM Linux
• Issue in using mmap on ARM target   Russell King - ARM Linux
• [PATCH 1/7] pwm: Add pwm core driver   Ryan Mallon
• [PATCH] mmc: failure of block read wait for long time   Adrian Hunter
• imx patches for 2.6.37   Uwe Kleine-König
• [PATCH 1/5] ARM: imx/clock-imx27: Pass NULL as function callback, not 0   Uwe Kleine-König
• [PATCH 2/5] ARM: imx/pcm038: make regulator platform data static   Uwe Kleine-König
• [PATCH 3/5] ARM: imx: make all pin lists const and signed, move to .init where possible   Uwe Kleine-König
• [PATCH 4/5] ARM: imx/pcm970: make platform_data static   Uwe Kleine-König
• [PATCH 5/5] ARM: imx/pca100: only specify i2c device type once   Uwe Kleine-König
• imx patches for 2.6.37   Uwe Kleine-König
• [PATCH 1/7] pwm: Add pwm core driver   Lars-Peter Clausen
• [PATCH 07/13 v3] OMAP clock: Add uart4_ick/fck definitions for 3630   Paul Walmsley
• [PATCH 08/13 v3] OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs   Paul Walmsley
• [PATCH 07/13 v3] OMAP clock: Add uart4_ick/fck definitions for 3630   Kevin Hilman
• [PATCH v4 2/4] omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set   Tony Lindgren
• RFC: mixing device idle and CPUidle or non-atomic idle notifiers   Rafael J. Wysocki
• [PATCH v5 1/5] omap gpmc: enable irq mode in gpmc   Tony Lindgren
• [PATCH v5 2/5] omap3: nand: prefetch in irq mode support   Tony Lindgren
• [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's   Ben Dooks
• [PATCH v2 0/3] ARM: S5PC100/S5PC110/S5PC210: Sort out the configuration   Kyungmin Park
• [PATCH v2 1/3] ARM: S5PC110: Place the common SPARSEMEM at ARCH_S5PV210   Kyungmin Park
• [PATCH v2 2/3] ARM: S5PC210: Place the common SPARSEMEM at ARCH_S5PV310   Kyungmin Park
• [PATCH v2 3/3] ARM: S5PC100/S5PC110/S5PC210: Selete PLAT_S5P at each ARCH_S5P series   Kyungmin Park
• [PATCH v8 0/6] OMAP: WDT: Implement WDT in hwmod way   Kevin Hilman
• [PATCH v2 1/3] ARM: S5PC110: Place the common SPARSEMEM at ARCH_S5PV210   Kukjin Kim
• [PATCH v2 2/3] ARM: S5PC210: Place the common SPARSEMEM at ARCH_S5PV310   Kukjin Kim
• [PATCH v2 3/3] ARM: S5PC100/S5PC110/S5PC210: Selete PLAT_S5P at each ARCH_S5P series   Kukjin Kim
• [PATCH v3 3/3] ARM: S5PC100/S5PC110/S5PC210: Remove duplicated selete PLAT_S5P at each ARCH_S5P series   Kyungmin Park
• [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's   Nayak, Rajendra
• [PATCH 1/7] pwm: Add pwm core driver   Arun MURTHY
• [PATCHv2 4/7] ARM: S5PC110: Add si470x radio device to the GONI board   Marek Szyprowski
• [PATCH] mmc: failure of block read wait for long time   Ghorai, Sukumar
• [PATCH v5 2/5] omap3: nand: prefetch in irq mode support   Ghorai, Sukumar
• High Latency in PL310 L2 cache maintenance operations   hashim alig
• [PATCH v5 1/5] omap gpmc: enable irq mode in gpmc   Ghorai, Sukumar
• [PATCH v3] ARM: S5P: Add support for gpio interrupts   Kukjin Kim
• [GIT PULL] ARM: l2x0: kexex, cleanup and optimisation for 2.6.37   Shilimkar, Santosh
• [PATCH 1/7] SPI: add PrimeCell generic DMA to PL022 v12   Grant Likely
• High Latency in PL310 L2 cache maintenance operations   Catalin Marinas
• Request: Update the Universal board to use the correct machine name   Kyungmin Park
• Fw: libertas_cf driver problems   dylan cristiani
• Request: Update the Universal board to use the correct machine name   Russell King - ARM Linux
• [PATCH 1/2] rtc: avoid checking cpuid in pxa-rtc   Haojian Zhuang
• [PATCH 2/2] rtc: use __devinit instead on pxa-rtc   Haojian Zhuang
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   kishore kadiyala
• [PATCH 05/11] omap3: Remove non-existent config option   Felipe Contreras
• [PATCH 1/7] SPI: add PrimeCell generic DMA to PL022 v12   Linus Walleij
• [PATCH 2/2] ARM: S5PV310: Update CPU hotplug implementation   Kukjin Kim
• [PATCH] ARM: S5PV210: Add Torbreck board support   Kukjin Kim
• [PATCH 1/7] pwm: Add pwm core driver   Trilok Soni
• [PATCH 1/2] ARM: S5PV210: Add audio support to Aquila   Kukjin Kim
• [PATCH v3 3/3] ARM: S5PC100/S5PC110/S5PC210: Remove duplicated selete PLAT_S5P at each ARCH_S5P series   Kukjin Kim
• [PATCH] amba-pl011: add missing ST specific registers   Linus Walleij
• [RFC PATCH] ARM: Allow HIGHPTE with OUTER_CACHE if the processor supports outer PTWs   Catalin Marinas
• [PATCH v2] ARM: MM: bugfix: initialize spinlock for init_mm.context   Catalin Marinas
• [PATCH v8 0/6] OMAP: WDT: Implement WDT in hwmod way   Varadarajan, Charulatha
• [PATCH 05/11] omap3: Remove non-existent config option   Marathe, Yogesh
• [PATCH] oprofile, arm: proper release resources on failure   Robert Richter
• [PATCH] ARM: Samsung: add a workaround for get_clock() for serial driver   Marek Szyprowski
• [PATCH 2/4] esdhc-2 mx51: Modify the MSL codes when upstreaming fsl esdhc driver   Uwe Kleine-König
• [PATCH v8 0/6] OMAP: WDT: Implement WDT in hwmod way   Kevin Hilman
• [PATCH v8 0/6] OMAP: WDT: Implement WDT in hwmod way   Varadarajan, Charulatha
• [PATCH 01/14] ARM: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries   Catalin Marinas
• [PATCH] oprofile, arm: proper release resources on failure   Robert Richter
• [PATCH] amba-pl011: add missing ST specific registers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/14] ARM: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries   Shilimkar, Santosh
• [PATCH 01/14] ARM: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries   Russell King - ARM Linux
• [PATCH] oprofile, arm: proper release resources on failure   Will Deacon
• [PATCH 1/2] ARM: add memory types for the TCMs   Russell King - ARM Linux
• [PATCH v8 0/6] OMAP: WDT: Implement WDT in hwmod way   Kevin Hilman
• [PATCH 1/2] ARM: add memory types for the TCMs   Catalin Marinas
• [PATCH] ARM: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags   Santosh Shilimkar
• [PATCH] oprofile, arm: proper release resources on failure   Robert Richter
• [PATCH] ARM: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags   Catalin Marinas
• [PATCH] ARM: Avoid undefined Thumb-2 instructions using PC in compressed/head.S   Catalin Marinas
• [PATCH] oprofile, arm: proper release resources on failure   Robert Richter
• [PATCH] oprofile, arm: proper release resources on failure   Will Deacon
• [PATCH] oprofile, arm: proper release resources on failure   Robert Richter
• [PATCH 0/2] OMAP2+: misc. defconfig cleanups for 2.6.37   Tony Lindgren
• [PATCH 05/11] omap3: Remove non-existent config option   Felipe Contreras
• [PATCH 0/9] ARM: S3C64XX: real6410 and mini6410 patches for next   Darius Augulis
• [PATCH 1/9] ARM: S3C64XX: add frame buffer support for mach-real6410   Darius Augulis
• [PATCH 2/9 v2] ARM: S3C64XX: add nand support for mach-real6410   Darius Augulis
• [PATCH 3/9] ARM: S3C64XX: add touchscreen support for mach-real6410   Darius Augulis
• [PATCH 4/9] ARM: S3C64XX: add USB host support for mach-real6410   Darius Augulis
• [PATCH 5/9 v2] ARM: S3C64XX: add support for mach-mini6410   Darius Augulis
• [PATCH 6/9] ARM: S3C64XX: add nand support for mach-mini6410   Darius Augulis
• [PATCH 7/9] ARM: S3C64XX: add frame buffer support for mach-mini6410   Darius Augulis
• [PATCH 8/9] ARM: S3C64XX: add backlight control for mach-mini6410   Darius Augulis
• [PATCH 9/9] ARM: S3C64XX: add touchscreen support for mach-mini6410   Darius Augulis
• [GIT PULL] omap2 sparse fixes   G, Manjunath Kondaiah
• [PATCH V3 0/6] SD/MMC-driver for MX35/51 (and improvements to SDHCI)   Wolfram Sang
• [PATCH 1/6] mmc: sdhci-pltfm: Add structure for host-specific data   Wolfram Sang
• [PATCH 2/6] mmc: sdhci-pltfm: move .h-file into apropriate subdir   Wolfram Sang
• [PATCH 3/6] mmc: sdhci: introduce private get_ro   Wolfram Sang
• [PATCH 4/6] mmc: sdhci_pltfm: pass more data on custom init-call   Wolfram Sang
• [PATCH 5/6] mmc: sdhci-of-esdhc: factor out common stuff   Wolfram Sang
• [PATCH 6/6] mmc: sdhci-pltfm: add pltfm-driver for imx35/51   Wolfram Sang
• [PATCH 6/6] mmc: sdhci-pltfm: add pltfm-driver for imx35/51   Chris Ball
• [PATCH 1/2] ARM: mmp2: add mmc resource   Zhangfei Gao
• [PATCH 1/2] msm: qsd8x50: enable ethernet.   Gregory Bean
• [PATCH 2/2] msm: defconfig: enable CONFIG_PACKET.   Gregory Bean
• [PATCH v4 1/5] OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430   Rajendra Nayak
• [PATCH 1/6] mmc: sdhci-pltfm: Add structure for host-specific data   Richard Röjfors
• [PATCH v2 03/10] OMAP: mach-omap2: Fix static function warnings   Paul Walmsley
• [PATCH] amba-pl011: add missing ST specific registers   Linus Walleij
• imx patches for 2.6.37   Dan Williams
• [GIT PULL] omap2 sparse fixes   Tony Lindgren
• [GIT PULL] omap2 sparse fixes   G, Manjunath Kondaiah
• [PATCH v2 03/10] OMAP: mach-omap2: Fix static function warnings   G, Manjunath Kondaiah
• [PATCH 1/3] ARM: L2X0: Add prefetch offset   Kyungmin Park
• Please don't edit the subject. Use S5PC110 & S5PC210 as is   Kyungmin Park
• [PATCH 6/6] sh: oprofile: Use perf-events oprofile backend   Paul Mundt
• [PATCH 5/5] sdhci-s3c: Add support no internal clock divider in host controller   Kyungmin Park
• [PATCH 1/2] ARM: S5PV210: Add audio support to Aquila   Chanwoo Choi
• [PATCH 1/2] ARM: S5PV210: Add audio support to Aquila   Kukjin Kim
• [PATCH 5/5] sdhci-s3c: Add support no internal clock divider in host controller   Chris Ball
• Please don't edit the subject. Use S5PC110 & S5PC210 as is   Kukjin Kim
• Please don't edit the subject. Use S5PC110 & S5PC210 as is   Kyungmin Park
• Please don't edit the subject. Use S5PC110 & S5PC210 as is   Jassi Brar
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   Christian Riesch
• [PATCH v3 1/3] [ARM] tegra: add PCI Express clocks   Colin Cross
• [PATCH v3 2/3] [ARM] tegra: add PCI Express support   Colin Cross
• [PATCH v3 3/3] [ARM] tegra: harmony: enable PCI Express   Colin Cross
• [PATCH 0/7] ARM: S5PC210: I2C devices support and Universal board updates   Kyungmin Park
• [PATCH 1/7] ARM: S5PC210: Universal OneNAND support   Kyungmin Park
• [PATCH 2/7] ARM: S5PC110: Fix wrong interrupt I2C2 number   Kyungmin Park
• [PATCH 3/7] ARM: Samsung: Use the correct I2C2 interrupt   Kyungmin Park
• [PATCH 4/7] ARM: S5PC210: I2C1/2 support   Kyungmin Park
• [PATCH 5/7] ARM: S5PC210: I2C0/1 devices support on Universal board   Kyungmin Park
• [PATCH 6/7] ARM: S5PC210: Define the more I2C{3,4,5,6,7} address & interrupt   Kyungmin Park
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Kyungmin Park
• [PATCH 1/2] ARM: S5PV210: Add audio support to Aquila   Chanwoo Choi
• [PATCH 48/74] GIC: Added dummy handlers for Power Management Suspend Resume   viresh kumar
• [PATCH 5/5] sdhci-s3c: Add support no internal clock divider in host controller   Jeongbae Seo
• [PATCH 5/5] sdhci-s3c: Add support no internal clock divider in host controller   Kyungmin Park
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Jeongbae Seo
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Kyungmin Park
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Jassi Brar
• [PATCH] ARM: define a dummy filter function for ste_dma40   Linus Walleij
• Zaurus driver being loaded when it shouldn't.   Pavel Machek
• [PATCH] ARM: Samsung: Add helper function for setup gpios   Kyungmin Park
• [PATCH] ARM: S5PV210: Add audio support to Goni and Aquila board   Jassi Brar
• [PATCH] ARM: Samsung: Add helper function for setup gpios   Kukjin Kim
• [PATCH v4] ARM: Samsung: Add common s5p gpio interrupt support   Marek Szyprowski
• [PATCH 2/4] arm: dis-allow hotplug on MSM   Pavel Machek
• [PATCH] ARM: Samsung: Add helper function for setup gpios   Kyungmin Park
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Kyungmin Park
• [PATCH v2 0/3] ARM: S5PC210: Use the CPU common L2 cache configuration   Kyungmin Park
• [PATCH v2 3/3] ARM: S5PC210: Set the common L2 cache configurations   Kyungmin Park
• [PATCH v2 2/3] ARM: S5PC210: Remove L2 cache init at board file   Kyungmin Park
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Varadarajan, Charulatha
• [PATCH 6/6] sh: oprofile: Use perf-events oprofile backend   Will Deacon
• [PATCH 1/6] mmc: sdhci-pltfm: Add structure for host-specific data   Wolfram Sang
• [PATCH 4/6] mmc: sdhci_pltfm: pass more data on custom init-call   Lothar Waßmann
• [PATCH 3/7] ARM: Samsung: Use the correct I2C2 interrupt   Lothar Waßmann
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Cousson, Benoit
• [PATCH 3/7] ARM: Samsung: Use the correct I2C2 interrupt   Kyungmin Park
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Jongsun Han
• [PATCH 52/74] ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms   Shiraz Hashim
• [PATCH] spi/pl022: make sure the chip_info dev pointer is set   Linus Walleij
• [PATCH 4/6] mmc: sdhci_pltfm: pass more data on custom init-call   Anton Vorontsov
• [PATCH 3/7] ARM: Samsung: Use the correct I2C2 interrupt   Jongsun Han
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Kyungmin Park
• [PATCH 3/7] ARM: Samsung: Use the correct I2C2 interrupt   Kyungmin Park
• [PATCH 1/6] mmc: sdhci-pltfm: Add structure for host-specific data   Richard Röjfors
• [PATCH] spi/pl022: compare bitwidth to enums   Linus Walleij
• [PATCH] ARM: Samsung S5P: Unify defines for both gpio interrupt types   Marek Szyprowski
• [PATCH 1/6] mmc: sdhci-pltfm: Add structure for host-specific data   Wolfram Sang
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Jongsun Han
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Kyungmin Park
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Kukjin Kim
• [PATCH] cpufreq for freescale mx51   Amit Kucheria
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Kyungmin Park
• [PATCH 1/6] mmc: sdhci-pltfm: Add structure for host-specific data   Anton Vorontsov
• [PATCH] ARM: Samsung S5P: Unify defines for both gpio interrupt types   Kukjin Kim
• [PATCH] ARM: Samsung S5P: Unify defines for both gpio interrupt types   Marek Szyprowski
• [PATCH] spi/pl022: compare bitwidth to enums   Linus Walleij
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Marek Szyprowski
• [PATCH] ARM: Samsung S5P: Unify defines for both gpio interrupt types   Kukjin Kim
• [PATCH] Fixing ethernet driver compilation error for i.MX31 ADS board   Ian Lartey
• [PATCH] Fixing ethernet driver compilation error for i.MX31 ADS board   Uwe Kleine-König
• [PATCH v4] ARM: Samsung: Add common s5p gpio interrupt support   Kukjin Kim
• [PATCH v4] ARM: Samsung: Add common s5p gpio interrupt support   Kyungmin Park
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Kevin Hilman
• dmaengine patches   Sascha Hauer
• [PATCH 1/4] dmaengine: add possibility for cyclic transfers   Sascha Hauer
• [PATCH 2/4] dmaengine: add wrapper functions for device control functions   Sascha Hauer
• [PATCH 3/4] dmaengine: Add Freescale i.MX SDMA support   Sascha Hauer
• [PATCH 4/4] dmaengine: Add Freescale i.MX1/21/27 DMA driver   Sascha Hauer
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Kevin Hilman
• imx patches for 2.6.37   Sascha Hauer
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Cousson, Benoit
• [PATCH] spi/pl022: make sure the chip_info dev pointer is set   Grant Likely
• [PATCH] spi/pl022: compare bitwidth to enums   Grant Likely
• [PATCH 16/40 v2] ARM: mx5: dynamically register imx-i2c devices   Uwe Kleine-König
• [PATCH] Fixing ethernet driver compilation error for i.MX31 ADS board   Ian Lartey
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Kevin Hilman
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Tony Lindgren
• [PATCH 1/2] Fixing ethernet driver compilation error for i.MX31 ADS board   Ian Lartey
• [PATCH 2/2] Adding cs89x0, standard ethernet driver for iMX31 platform.   Ian Lartey
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Varadarajan, Charulatha
• [PATCH] spi/pl022: compare bitwidth to enums   Kevin Wells
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Varadarajan, Charulatha
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Varadarajan, Charulatha
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Paul Walmsley
• [PATCH 2/4] arm: dis-allow hotplug on MSM   Daniel Walker
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Cousson, Benoit
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Tony Lindgren
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Cousson, Benoit
• [PATCH 2/2] ARM: S5PV310: Update CPU hotplug implementation   Colin Cross
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Shilimkar, Santosh
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Varadarajan, Charulatha
• [PATCH] ARM: add cpu_idle_wait() to support CPUidle on SMP systems.   Kevin Hilman
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Kevin Hilman
• [PATCH] ARM: add cpu_idle_wait() to support CPUidle on SMP systems.   Colin Cross
• [PATCH 2/4] arm: dis-allow hotplug on MSM   Daniel Walker
• [PATCH 1/2] Fixing ethernet driver compilation error for i.MX31 ADS board   Uwe Kleine-König
• [PATCH 2/2] Adding cs89x0, standard ethernet driver for iMX31 platform.   Uwe Kleine-König
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Cory Maccarrone
• [PATCH 0/3] Few omap1 patches for v2.6.37 merge window   Tony Lindgren
• [PATCH 1/3] OMAP1: Add support for SoC camera interface   Tony Lindgren
• [PATCH 2/3] OMAP1: Amstrad Delta: add support for camera   Tony Lindgren
• [PATCH 3/3] OMAP1: Amstrad Delta: add camera controlled LEDS trigger   Tony Lindgren
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Tony Lindgren
• [PATCH v3 2/3] [ARM] tegra: add PCI Express support   Colin Cross
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Cory Maccarrone
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Michał Mirosław
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Tony Lindgren
• [PATCH 2/4] arm: dis-allow hotplug on MSM   Pavel Machek
• [PATCH 2/4] arm: dis-allow hotplug on MSM   Daniel Walker
• [PATCH] GIC: Dont disable INT in ack callback   Daniel Walker
• [PATCH 2/4] arm: dis-allow hotplug on MSM   Pavel Machek
• [PATCH 2/4] arm: dis-allow hotplug on MSM   Daniel Walker
• [PATCH 2/4] arm: dis-allow hotplug on MSM   Russell King - ARM Linux
• [PATCH 2/4] arm: dis-allow hotplug on MSM   Daniel Walker
• [PATCH 2/4] arm: dis-allow hotplug on MSM   Russell King - ARM Linux
• [PATCH 2/2] ARM: S5PV310: Update CPU hotplug implementation   Russell King - ARM Linux
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Tony Lindgren
• [GIT PULL] Couple of omap fixes   Tony Lindgren
• [PATCH 1/3] ARM: move timer-sp.c from versatile to common   Rob Herring
• [PATCH 3/3] ARM: twd_smp: add clock api support   Rob Herring
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Jassi Brar
• pxa3xx_nand issues   Marek Vasut
• [PATCH 08/11] UCB1400: Pass ucb1400-gpio data through ac97 bus   Marek Vasut
• [PATCH v2] Input: Make ADS7846 independent on regulator   Marek Vasut
• [PATCH 2/3] ARM: timer-sp: support timer clock freq other than 1MHz   Rob Herring
• [PATCH 3/3] ARM: twd_smp: add clock api support   Colin Cross
• [PATCH 3/3] ARM: twd_smp: add clock api support   Rob Herring
• [PATCH 3/3] ARM: twd_smp: add clock api support   Colin Cross
• [PATCH 1/3] ARM: move timer-sp.c from versatile to common   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] gic: Add functions to save and restore gic state   Colin Cross
• [PATCH 2/2] gic: Export irq chip functions   Colin Cross
• [PATCH 3/3] ARM: twd_smp: add clock api support   Rob Herring
• [PATCH 1/3] ARM: move timer-sp.c from versatile to common   Rob Herring
• [PATCH 1/7] pwm: Add pwm core driver   Arun MURTHY
• [PATCH 3/3] ARM: twd_smp: add clock api support   Colin Cross