[PATCH 1/5] omap3: Introduce CompuLab CM-T3517 module.

[Igor Grinberg]

 On 09/16/10 19:53, Tony Lindgren wrote:
> * Igor Grinberg <grinberg at compulab.co.il> [100916 01:46]:
>> Add basic suppot, enable uart and led.
>>
>> Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>
>> ---
>>  arch/arm/mach-omap2/Kconfig          |    7 ++
>>  arch/arm/mach-omap2/Makefile         |    1 +
>>  arch/arm/mach-omap2/board-cm-t3517.c |  109 ++++++++++++++++++++++++++++++++++
>>  3 files changed, 117 insertions(+), 0 deletions(-)
>>  create mode 100644 arch/arm/mach-omap2/board-cm-t3517.c
> Looks like you're missing the debug uart entry for
> arch/arm/plat-omap/include/plat/uncompress.h?
>
> You can test this by enabling DEBUG_LL and EARLY_PRINTK
> in your .config, then pass earlyprintk in the kernel
> cmdline. Might become handy for debugging the early
> init process for your board.

Indeed can be useful.

Thanks.

> Regards,
>
> Tony
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

-- 
Regards,
Igor.