[PATCH 1/5] omap3: Introduce CompuLab CM-T3517 module.

[Tony Lindgren]

* Igor Grinberg <grinberg at compulab.co.il> [100916 01:46]:
> Add basic suppot, enable uart and led.
> 
> Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>
> ---
>  arch/arm/mach-omap2/Kconfig          |    7 ++
>  arch/arm/mach-omap2/Makefile         |    1 +
>  arch/arm/mach-omap2/board-cm-t3517.c |  109 ++++++++++++++++++++++++++++++++++
>  3 files changed, 117 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-omap2/board-cm-t3517.c

Looks like you're missing the debug uart entry for
arch/arm/plat-omap/include/plat/uncompress.h?

You can test this by enabling DEBUG_LL and EARLY_PRINTK
in your .config, then pass earlyprintk in the kernel
cmdline. Might become handy for debugging the early
init process for your board.

Regards,

Tony