[PATCH 10/11] omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and docleanups
Tony Lindgren
tony at atomide.com
Thu Sep 23 21:51:09 EDT 2010
From: Jarkko Nikula <jhnikula at gmail.com>
This 'legacy' OMAP2420 McBSP2 muxing code is currently broken after recent
conversion to new mux code. The omap_mcbsp_request calling this code is
usually called after booting whereas the omap_mux_init_signal is __init
marked so null pointer dereference would occur.
Fix this by removing the muxing code and let the bootloader or board file to
do it if necessary. Remove also omap2_mcbsp_ops as there is no use for it.
Signed-off-by: Jarkko Nikula <jhnikula at gmail.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
arch/arm/mach-omap2/mcbsp.c | 39 ---------------------------------------
1 files changed, 0 insertions(+), 39 deletions(-)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 467aae2..88b8790 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -23,29 +23,6 @@
#include <plat/cpu.h>
#include <plat/mcbsp.h>
-#include "mux.h"
-
-static void omap2_mcbsp2_mux_setup(void)
-{
- omap_mux_init_signal("eac_ac_sclk.mcbsp2_clkx", OMAP_PULL_ENA);
- omap_mux_init_signal("eac_ac_fs.mcbsp2_fsx", OMAP_PULL_ENA);
- omap_mux_init_signal("eac_ac_din.mcbsp2_dr", OMAP_PULL_ENA);
- omap_mux_init_signal("eac_ac_dout.mcbsp2_dx", OMAP_PULL_ENA);
- omap_mux_init_gpio(117, OMAP_PULL_ENA);
- /*
- * TODO: Need to add MUX settings for OMAP 2430 SDP
- */
-}
-
-static void omap2_mcbsp_request(unsigned int id)
-{
- if (cpu_is_omap2420() && (id == OMAP_MCBSP2))
- omap2_mcbsp2_mux_setup();
-}
-
-static struct omap_mcbsp_ops omap2_mcbsp_ops = {
- .request = omap2_mcbsp_request,
-};
#ifdef CONFIG_ARCH_OMAP2420
static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
@@ -55,7 +32,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@@ -63,7 +39,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
};
#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata)
@@ -82,7 +57,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@@ -90,7 +64,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP3_BASE,
@@ -98,7 +71,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP4_BASE,
@@ -106,7 +78,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX,
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP5_BASE,
@@ -114,7 +85,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX,
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
};
#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata)
@@ -133,7 +103,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
@@ -143,7 +112,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x500, /* The FIFO has 1024 + 256 locations */
},
{
@@ -153,7 +121,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
@@ -162,7 +129,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX,
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
@@ -171,7 +137,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX,
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
};
@@ -189,28 +154,24 @@ static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
.dma_rx_sync = OMAP44XX_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP1_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP1,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP2_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP2_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP2,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP3_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP3_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP3,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP4_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP4_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP4_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP4,
- .ops = &omap2_mcbsp_ops,
},
};
#define OMAP44XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap44xx_mcbsp_pdata)
More information about the linux-arm-kernel
mailing list