[PATCH 4/5] rtc: rtc-s3c: Fix on RTC initialization method

[Kukjin Kim]

From: Changhwan Youn <chaos.youn at samsung.com>

This patch changes RTC initialization method on probe() as
per Wan ZongShun's suggestion. The 'rtc_valid_tm(tm)' can
check whether RTC BCD is valid or not.

And should be changed the method of check because previous
method cannot validate RTC BCD registers properly.

Signed-off-by: Changhwan Youn <chaos.youn at samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
Cc: Ben Dooks <ben-linux at fluff.org>
Cc: Wan ZongShun <mcuos.com at gmail.com>
---
 drivers/rtc/rtc-s3c.c |   16 +++++++++++-----
 1 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index c078548..7f15073 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -458,8 +458,8 @@ static int __devexit s3c_rtc_remove(struct platform_device *dev)
 static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
+	struct rtc_time rtc_tm;
 	struct resource *res;
-	unsigned int tmp, i;
 	int ret;
 
 	pr_debug("%s: probe=%p\n", __func__, pdev);
@@ -540,11 +540,17 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 
 	/* Check RTC Time */
 
-	for (i = S3C2410_RTCSEC; i <= S3C2410_RTCYEAR; i += 0x4) {
-		tmp = readb(s3c_rtc_base + i);
+	s3c_rtc_gettime(NULL, &rtc_tm);
 
-		if ((tmp & 0xf) > 0x9 || ((tmp >> 4) & 0xf) > 0x9)
-			writeb(0, s3c_rtc_base + i);
+	if (rtc_valid_tm(&rtc_tm)) {
+		rtc_tm.tm_year	= 100;
+		rtc_tm.tm_mon	= 0;
+		rtc_tm.tm_mday	= 1;
+		rtc_tm.tm_hour	= 0;
+		rtc_tm.tm_min	= 0;
+		rtc_tm.tm_sec	= 0;
+
+		s3c_rtc_settime(NULL, &rtc_tm);
 	}
 
 	if (s3c_rtc_cpu_type == TYPE_S3C64XX)
-- 
1.6.2.5