[PATCH 6/6] sh: oprofile: Use perf-events oprofile backend
Matt Fleming
matt at console-pimps.org
Mon Sep 13 02:07:37 EDT 2010
Now that we've got a generic perf-events based oprofile backend we might
as well make use of it seeing as SH doesn't do anything special with its
oprofile backend.
Signed-off-by: Matt Fleming <matt at console-pimps.org>
---
arch/sh/Kconfig | 2 +-
arch/sh/kernel/perf_event.c | 8 +++
arch/sh/oprofile/Makefile | 2 +-
arch/sh/oprofile/common.c | 104 ++++--------------------------------------
arch/sh/oprofile/op_impl.h | 33 --------------
5 files changed, 20 insertions(+), 129 deletions(-)
delete mode 100644 arch/sh/oprofile/op_impl.h
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 33990fa..dc4a017 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -11,7 +11,7 @@ config SUPERH
select HAVE_CLK
select HAVE_IDE if HAS_IOPORT
select HAVE_MEMBLOCK
- select HAVE_OPROFILE
+ select HAVE_OPROFILE if PERF_EVENTS
select HAVE_GENERIC_DMA_COHERENT
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c
index 2cb9ad5..3c3fc9a 100644
--- a/arch/sh/kernel/perf_event.c
+++ b/arch/sh/kernel/perf_event.c
@@ -59,6 +59,14 @@ static inline int sh_pmu_initialized(void)
return !!sh_pmu;
}
+const char *sh_pmu_name(void)
+{
+ if (!sh_pmu)
+ return NULL;
+
+ return sh_pmu->name;
+}
+
int perf_num_counters(void)
{
if (!sh_pmu)
diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile
index 4886c5c..e1015ae 100644
--- a/arch/sh/oprofile/Makefile
+++ b/arch/sh/oprofile/Makefile
@@ -4,6 +4,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
oprof.o cpu_buffer.o buffer_sync.o \
event_buffer.o oprofile_files.o \
oprofilefs.o oprofile_stats.o \
- timer_int.o )
+ timer_int.o oprofile_perf.o )
oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c
index ac60493..87ce88e 100644
--- a/arch/sh/oprofile/common.c
+++ b/arch/sh/oprofile/common.c
@@ -18,113 +18,29 @@
#include <linux/errno.h>
#include <linux/smp.h>
#include <asm/processor.h>
-#include "op_impl.h"
-
-static struct op_sh_model *model;
-
-static struct op_counter_config ctr[20];
extern void sh_backtrace(struct pt_regs * const regs, unsigned int depth);
+extern const char *sh_pmu_name(void);
-static int op_sh_setup(void)
-{
- /* Pre-compute the values to stuff in the hardware registers. */
- model->reg_setup(ctr);
-
- /* Configure the registers on all cpus. */
- on_each_cpu(model->cpu_setup, NULL, 1);
-
- return 0;
-}
-
-static int op_sh_create_files(struct super_block *sb, struct dentry *root)
-{
- int i, ret = 0;
-
- for (i = 0; i < model->num_counters; i++) {
- struct dentry *dir;
- char buf[4];
-
- snprintf(buf, sizeof(buf), "%d", i);
- dir = oprofilefs_mkdir(sb, root, buf);
-
- ret |= oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
- ret |= oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
- ret |= oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
- ret |= oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
-
- if (model->create_files)
- ret |= model->create_files(sb, dir);
- else
- ret |= oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
-
- /* Dummy entries */
- ret |= oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
- }
-
- return ret;
-}
-
-static int op_sh_start(void)
+static char *op_name_from_perf_name(const char *name)
{
- /* Enable performance monitoring for all counters. */
- on_each_cpu(model->cpu_start, NULL, 1);
+ if (!strcmp(name, "SH7750"))
+ return "sh/sh7750";
+ if (!strcmp(name, "SH-4A"))
+ return "sh/sh4a";
- return 0;
-}
-
-static void op_sh_stop(void)
-{
- /* Disable performance monitoring for all counters. */
- on_each_cpu(model->cpu_stop, NULL, 1);
+ return NULL;
}
int __init oprofile_arch_init(struct oprofile_operations *ops)
{
- struct op_sh_model *lmodel = NULL;
- int ret;
-
- /*
- * Always assign the backtrace op. If the counter initialization
- * fails, we fall back to the timer which will still make use of
- * this.
- */
ops->backtrace = sh_backtrace;
+ ops->cpu_type = op_name_from_perf_name(sh_pmu_name());
- /*
- * XXX
- *
- * All of the SH7750/SH-4A counters have been converted to perf,
- * this infrastructure hook is left for other users until they've
- * had a chance to convert over, at which point all of this
- * will be deleted.
- */
-
- if (!lmodel)
- return -ENODEV;
- if (!(current_cpu_data.flags & CPU_HAS_PERF_COUNTER))
- return -ENODEV;
-
- ret = lmodel->init();
- if (unlikely(ret != 0))
- return ret;
-
- model = lmodel;
-
- ops->setup = op_sh_setup;
- ops->create_files = op_sh_create_files;
- ops->start = op_sh_start;
- ops->stop = op_sh_stop;
- ops->cpu_type = lmodel->cpu_type;
-
- printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
- lmodel->cpu_type);
-
- return 0;
+ return oprofile_perf_init(ops);
}
void oprofile_arch_exit(void)
{
- if (model && model->exit)
- model->exit();
+ oprofile_perf_exit();
}
diff --git a/arch/sh/oprofile/op_impl.h b/arch/sh/oprofile/op_impl.h
deleted file mode 100644
index 1244479..0000000
--- a/arch/sh/oprofile/op_impl.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef __OP_IMPL_H
-#define __OP_IMPL_H
-
-/* Per-counter configuration as set via oprofilefs. */
-struct op_counter_config {
- unsigned long enabled;
- unsigned long event;
-
- unsigned long count;
-
- /* Dummy values for userspace tool compliance */
- unsigned long kernel;
- unsigned long user;
- unsigned long unit_mask;
-};
-
-/* Per-architecture configury and hooks. */
-struct op_sh_model {
- void (*reg_setup)(struct op_counter_config *);
- int (*create_files)(struct super_block *sb, struct dentry *dir);
- void (*cpu_setup)(void *dummy);
- int (*init)(void);
- void (*exit)(void);
- void (*cpu_start)(void *args);
- void (*cpu_stop)(void *args);
- char *cpu_type;
- unsigned char num_counters;
-};
-
-/* arch/sh/oprofile/common.c */
-extern void sh_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-#endif /* __OP_IMPL_H */
--
1.7.1
More information about the linux-arm-kernel
mailing list