[PATCH v2] davinci: Initial support for MityDSP-L138/MityARM-1808
Kevin Hilman
khilman at deeprootsystems.com
Thu Sep 2 13:09:17 EDT 2010
Michael Williamson <michael.williamson at criticallink.com> writes:
> This patch adds initial support for the MityDSP-L138 and MityDSP-1808 system
> on Module (SOM) under the machine name "mityomapl138". These SOMs are based
> on the da850 davinci CPU architecture. Information on these SOMs may be
> found at http://www.mitydsp.com.
>
> Basic support for the console UART, NAND, and EMAC (MII interface) is
> included in this patch.
>
> Signed-off-by: Michael Williamson <michael.williamson at criticallink.com>
Looks good, one comple very minor things left...
> ---
> Changes since v1:
> 1) Split out defconfig changes to separate patch.
> 2) Split out console init changes to DA8XX EVMS to separate patch.
> 3) Change a pr_info() to a pr_debug().
>
> arch/arm/mach-davinci/Kconfig | 9 +
> arch/arm/mach-davinci/Makefile | 1 +
> arch/arm/mach-davinci/board-mityomapl138.c | 220 +++++++++++++++++++++++
> arch/arm/mach-davinci/include/mach/uncompress.h | 1 +
> 4 files changed, 231 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-davinci/board-mityomapl138.c
>
> diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
> index 2bf03e9..633eccb 100644
> --- a/arch/arm/mach-davinci/Kconfig
> +++ b/arch/arm/mach-davinci/Kconfig
> @@ -185,6 +185,15 @@ config MACH_TNETV107X
> help
> Say Y here to select the TI TNETV107X Evaluation Module.
>
> +config MACH_MITYOMAPL138
> + bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
> + default ARCH_DAVINCI_DA850
We have a (admittedly arbitrary) policy of only enabling the official
EVM boards in the Kconfig. However, feel free to enable your board
by default in da8xx_omapl_defconfig.
> + depends on ARCH_DAVINCI_DA850
> + help
> + Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
> + System on Module. Information on this SoM may be found at
> + http://www.mitydsp.com
> +
> config DAVINCI_MUX
> bool "DAVINCI multiplexing support"
> depends on ARCH_DAVINCI
> diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
> index eab4c0f..3e966e8 100644
> --- a/arch/arm/mach-davinci/Makefile
> +++ b/arch/arm/mach-davinci/Makefile
> @@ -33,6 +33,7 @@ obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o
> obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o
> obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o
> obj-$(CONFIG_MACH_TNETV107X) += board-tnetv107x-evm.o
> +obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o
>
> # Power Management
> obj-$(CONFIG_CPU_FREQ) += cpufreq.o
> diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
> new file mode 100644
> index 0000000..f95cd9c
> --- /dev/null
> +++ b/arch/arm/mach-davinci/board-mityomapl138.c
> @@ -0,0 +1,220 @@
> +/*
> + * Critical Link MityOMAP-L138 SoM
> + *
> + * Copyright (C) 2010 Critical Link LLC - http://www.criticallink.com
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of
> + * any kind, whether express or implied.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/console.h>
> +#include <linux/platform_device.h>
> +#include <linux/mtd/partitions.h>
> +
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +#include <mach/common.h>
> +#include <mach/cp_intc.h>
> +#include <mach/da8xx.h>
> +#include <mach/nand.h>
> +#include <mach/mux.h>
> +
> +#define MITYOMAPL138_PHY_MASK 0x08 /* hardcoded for now */
> +#define MITYOMAPL138_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
> +
> +/*
> + * MityDSP-L138 includes a 256 MByte large-page NAND flash
> + * (128K blocks).
> + */
> +struct mtd_partition mityomapl138_nandflash_partition[] = {
> + {
> + .name = "rootfs",
> + .offset = 0,
> + .size = SZ_128M,
> + .mask_flags = 0, /* MTD_WRITEABLE, */
> + },
> + {
> + .name = "homefs",
> + .offset = MTDPART_OFS_APPEND,
> + .size = MTDPART_SIZ_FULL,
> + .mask_flags = 0,
> + },
> +};
> +
> +static struct davinci_nand_pdata mityomapl138_nandflash_data = {
> + .parts = mityomapl138_nandflash_partition,
> + .nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
> + .ecc_mode = NAND_ECC_HW,
> + .options = NAND_USE_FLASH_BBT | NAND_BUSWIDTH_16,
> + .ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
Missing a tab in this list line for alignment.
[...]
Kevin
More information about the linux-arm-kernel
mailing list