amba_pl022 spi->mode fix/cleanup patches

[Linus Walleij]

2010/9/10  <wellsk40 at gmail.com>:

> This patch series updates drivers and platforms that depend on the
> amba_pl022 driver and use the pl022_config_chip structure for
> setting up the SPI mode and data transfer width.

I get regressions from the ab8500-spi.c driver from this patch:

> ssp-pl022 ssp0: ARM PL022 driver, device ID: 0x01080022
> pl022: mapped registers from 0x80002000 to d0834000
> ab8500-spi spi0.0: unknown chip, revision: 0x80
> ab8500-spi: probe of spi0.0 failed with error -22

The 0x80 above used to be 0x00 before these patches.
So all of a sudden bit 7 gets set...

I don't know why this happens, probably some flag that used to
be set had not been properly propagated in the first patch to alter
the AB8500 device registration?

Yours,
Linus Walleij