[PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
Kevin Hilman
khilman at deeprootsystems.com
Thu Sep 30 09:57:47 EDT 2010
"Varadarajan, Charulatha" <charu at ti.com> writes:
> With OMAP2PLUS watchdog implemented in hwmod fw way, the
> module is reset during init.
Please drop this sentence, as it's not directly related to hwmod, but
related to hardware reset, and was previously masked by most bootloaders.
> After a watchdog timer module reset, the WDTs are enabled. The
> default time for a system reset after a watchdog module reset
> is ~10s as per the default value of the WDT registers. Hence
> the system would be reset after 10s, if watchdog is not disabled
> within 10s.
>
> This patch fixes the above issue by disabling the watchdog timer
> after reset during initialization of devices.
Should also describe what happends if/when the watchdog driver is
loaded.
Kevin
> Signed-off-by: Charulatha V <charu at ti.com>
> Reported-by: Kevin Hilman <khilman at deeprootsystems.com>
> ---
> This patch is dependent on the below patch series (wdt hwmod) and
> is created on top of pm-core branch.
> http://www.spinics.net/lists/linux-omap/msg37043.html
>
> arch/arm/mach-omap2/devices.c | 44 +++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 44 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
> index 8e2f0aa..9f44fc6 100644
> --- a/arch/arm/mach-omap2/devices.c
> +++ b/arch/arm/mach-omap2/devices.c
> @@ -916,11 +916,55 @@ static inline void omap_init_vout(void) {}
>
> /*-------------------------------------------------------------------------*/
>
> +/*
> + * WDT mdoule is reset during init which enables the watchdog.
> + * Hence it is required to disable the watchdog after the WDT reset
> + * during init. Otherwise the system would reboot as per the default
> + * watchdog timer registers settings.
> + */
> +#define OMAP_WDT_WPS (0x34)
> +#define OMAP_WDT_SPR (0x48)
> +
> +static int omap2_disable_wdt(struct omap_hwmod *oh, void *user)
> +{
> + void __iomem *base;
> +
> + if (!oh)
> + pr_err("Could not look up wdtimer_hwmod\n");
> +
> + base = oh->_mpu_rt_va;
> +
> + /* Enable the clocks before accessing the WDT registers */
> + omap_hwmod_enable(oh);
> +
> + /* sequence required to disable watchdog */
> + __raw_writel(0xAAAA, base + OMAP_WDT_SPR); /* TIMER_MODE */
> + while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
> + cpu_relax();
> +
> + __raw_writel(0x5555, base + OMAP_WDT_SPR); /* TIMER_MODE */
> + while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
> + cpu_relax();
> +
> + omap_hwmod_idle(oh);
> +
> + return 0;
> +}
> +
> +static void __init omap_disable_wdt(void)
> +{
> + if (cpu_class_is_omap2())
> + omap_hwmod_for_each_by_class("wd_timer",
> + omap2_disable_wdt, NULL);
> + return;
> +}
> +
> static int __init omap2_init_devices(void)
> {
> /* please keep these calls, and their implementations above,
> * in alphabetical order so they're easier to sort through.
> */
> + omap_disable_wdt();
> omap_hsmmc_reset();
> omap_init_camera();
> omap_init_mbox();
More information about the linux-arm-kernel
mailing list