[PATCH 3/4] esdhc-3 esdhc: fsl esdhc driver based on sdhci driver
zhangfei gao
zhangfei.gao at gmail.com
Sun Sep 26 04:56:16 EDT 2010
On Thu, Sep 23, 2010 at 11:43 PM, Richard Zhu <r65037 at freescale.com> wrote:
> Based on SDHCI API, esdhc driver supports PIO and simple internal
> DMA modes.
>
> Signed-off-by: Richard Zhu <r65037 at freescale.com>
> ---
> drivers/mmc/host/Kconfig | 13 ++
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/sdhci-imx.c | 395 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 409 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mmc/host/sdhci-imx.c
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 283190b..ce2840c 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -130,6 +130,19 @@ config MMC_SDHCI_CNS3XXX
>
> If unsure, say N.
>
> +config MMC_SDHCI_IMX
> + tristate "Freescale i.MX platform eSDHCI support"
> + depends on ARCH_MX5 && MMC_SDHCI
> + depends on MMC_SDHCI_PLTFM
> + select MMC_SDHCI_IO_ACCESSORS
> + help
> + This selects the Freescale i.MX Enhanced Secure Card Host
> + Controller Interface.
> + If you have a i.MX platform with a Multimedia Card slot,
> + say Y or M here.
> +
> + If unsure, say N.
> +
> config MMC_SDHCI_S3C
> tristate "SDHCI support on Samsung S3C SoC"
> depends on MMC_SDHCI && (PLAT_S3C24XX || PLAT_S3C64XX)
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 840bcb5..ae7c3e7 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -40,6 +40,7 @@ obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o
> obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-platform.o
> sdhci-platform-y := sdhci-pltfm.o
> sdhci-platform-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
> +sdhci-platform-$(CONFIG_MMC_SDHCI_IMX) += sdhci-imx.o
>
> obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
> sdhci-of-y := sdhci-of-core.o
> diff --git a/drivers/mmc/host/sdhci-imx.c b/drivers/mmc/host/sdhci-imx.c
> new file mode 100644
> index 0000000..6e34bcd
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-imx.c
> @@ -0,0 +1,395 @@
> +/*
> + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
> + */
> +
> +/*
> + * sdhci-imx.c Support for SDHCI platform devices
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +/* Supports:
> + * SDHCI imx devices
> + *
> + * Inspired by sdhci-pci.c, by Pierre Ossman
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/highmem.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/gpio.h>
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/mmc/host.h>
> +#include <linux/sdhci-pltfm.h>
> +
> +#include <mach/mmc.h>
> +
> +#include "sdhci.h"
> +#include "sdhci-pltfm.h"
> +
> +/* Vendor specified registors */
> +#define FSL_SDHCI_WML 0x44
> +#define FSL_SDHCI_WML_16_WORDS 0x08100810
> +#define FSL_SDHCI_WML_32_WORDS 0x08200820
> +#define FSL_SDHCI_WML_64_WORDS 0x08400840
> +#define FSL_SDHCI_WML_128_WORDS 0x08800880
> +
> +/* Non-standard clock control registor */
> +#define ESDHC_SYSTEM_CONTROL 0x2C
> +#define ESDHC_CLOCK_MASK 0x0000FFF0
> +#define ESDHC_PREDIV_SHIFT 8
> +#define ESDHC_DIVIDER_SHIFT 4
> +#define ESDHC_CLOCK_PEREN 0x00000004
> +#define ESDHC_CLOCK_HCKEN 0x00000002
> +#define ESDHC_CLOCK_IPGEN 0x00000001
> +
> +/* Non-standard host control registor */
> +#define ESDHC_SDHCI_CTRL_8BITBUS 0x00000004
> +#define FSL_ESDHC_HOST_CONTROL_RES 0x33E
> +#define ESDHC_HOST_CONTROL_LE 0x20
> +
> +/*****************************************************************************\
> + * *
> + * SDHCI core callbacks *
> + * *
> +\*****************************************************************************/
> +
> +static u32 sdhci_imx_readl(struct sdhci_host *host, int reg)
> +{
> + return readl(host->ioaddr + reg);
> +}
> +
> +static u16 sdhci_imx_readw(struct sdhci_host *host, int reg)
> +{
> + u32 val;
> + u16 rc;
> +
> + if (reg % 4 == 3) {
> + printk(KERN_ERR "Invalid reg address!\n");
> + return 0;
> + }
> +
> + val = readl(host->ioaddr + (reg / 4) * 4);
> + rc = (val >> (reg % 4) * 8) & 0xFFFF;
> +
> + return rc;
> +}
> +
> +static u8 sdhci_imx_readb(struct sdhci_host *host, int reg)
> +{
> + u32 val;
> + u8 rc;
> +
> + val = readl(host->ioaddr + (reg / 4) * 4);
> + rc = (val >> (reg % 4) * 8) & 0xFF;
> + if (reg == SDHCI_HOST_CONTROL) {
> + /* Bus width */
> + if (val & ESDHC_SDHCI_CTRL_8BITBUS) {
> + rc |= SDHCI_CTRL_8BITBUS;
> + rc &= ~SDHCI_CTRL_4BITBUS;
> + } else if (val & SDHCI_CTRL_4BITBUS) {
> + rc &= ~SDHCI_CTRL_8BITBUS;
> + rc |= SDHCI_CTRL_4BITBUS;
> + } else {
> + rc &= ~SDHCI_CTRL_8BITBUS;
> + rc &= ~SDHCI_CTRL_4BITBUS;
> + }
> + /* DMA */
> + if (val & (SDHCI_CTRL_DMA_MASK << 5))
> + rc |= ((val >> 5) & SDHCI_CTRL_DMA_MASK);
> + /* FIXME D3CD */
> + }
> +
> + return rc;
> +}
> +
> +static void sdhci_imx_writel(struct sdhci_host *host, u32 val, int reg)
> +{
> + writel(val, host->ioaddr + reg);
> +}
> +
> +static void sdhci_imx_writew(struct sdhci_host *host, u16 val, int reg)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +
> + u32 io_val;
> +
> + if (reg % 4 == 3) {
> + printk(KERN_ERR "Invalid reg address!\n");
> + return;
> + }
> +
> + if (reg == SDHCI_BLOCK_SIZE) {
> + /*
> + * Two last DMA bits are reserved, and first one is used for
> + * non-standard blksz of 4096 bytes that we don't support
> + * yet. So clear the DMA boundary bits.
> + */
> + val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
> + }
> +
> + io_val = readl(host->ioaddr + (reg / 4) * 4);
> + io_val &= ~(0xFFFF << ((reg % 4) * 8));
> + io_val |= val << ((reg % 4) * 8);
> +
> + switch (reg) {
> + case SDHCI_TRANSFER_MODE:
> + /*
> + * Postpone this write, we must do it together with a
> + * command write that is down below.
> + */
> + pltfm_host->scratchpad = val;
> + return;
> + case SDHCI_COMMAND:
> + writel(io_val | pltfm_host->scratchpad,
> + host->ioaddr + SDHCI_TRANSFER_MODE);
> + /*
> + * Make a double check that the warte mark level register is
> + * configured properly. default value is FSL_SDHCI_WML_16_WORDS
> + */
> + if (readl(host->ioaddr + FSL_SDHCI_WML)
> + == FSL_SDHCI_WML_16_WORDS) {
> + if (host->flags & SDHCI_REQ_USE_DMA)
> + writel(FSL_SDHCI_WML_64_WORDS,
> + host->ioaddr + FSL_SDHCI_WML);
> + else
> + writel(FSL_SDHCI_WML_128_WORDS,
> + host->ioaddr + FSL_SDHCI_WML);
> + }
> + return;
> + }
> +
> + writel(io_val, host->ioaddr + (reg / 4) * 4);
> +}
> +
> +static void sdhci_imx_set_power(struct sdhci_host *host, u8 power)
> +{
> + int voltage = 0;
> +
> + /* There is no sdhci standard PWR CTL REG in imx sdhci */
> + if (host->pwr == power)
> + return;
> +
> + if (host->vmmc) {
> + if (power == (unsigned short)-1) {
> + regulator_disable(host->vmmc);
> + dev_dbg(mmc_dev(host->mmc), "mmc power off\n");
> + } else {
> + if (power == 7)
> + voltage = 1800000;
> + else if (power >= 8)
> + voltage = 2000000 + (power - 8) * 100000;
> + regulator_set_voltage(host->vmmc, voltage, voltage);
> +
> + if (regulator_enable(host->vmmc) == 0) {
> + dev_dbg(mmc_dev(host->mmc), "mmc power on\n");
> + msleep(1);
> + }
> + }
> + }
> +
> + host->pwr = power;
> +}
> +
> +static void sdhci_imx_writeb(struct sdhci_host *host, u8 val, int reg)
> +{
> + u32 io_val;
> +
> + /* Since there is no power register in FSL eSDHC, handle it in SW */
> + if (reg == SDHCI_POWER_CONTROL) {
> + sdhci_imx_set_power(host, val);
> + return;
> + }
> +
> + if (reg == SDHCI_HOST_CONTROL) {
> + io_val = readl(host->ioaddr + SDHCI_HOST_CONTROL);
> + /* Bit7~6, andi bit0 */
> + io_val |= (val & ~FSL_ESDHC_HOST_CONTROL_RES);
> + /* Ensure the LE mode */
> + io_val |= ESDHC_HOST_CONTROL_LE;
> + /* Configure the bus_width 8bits, 4bits, or 1bit*/
> + if (val & SDHCI_CTRL_8BITBUS) {
> + io_val |= ESDHC_SDHCI_CTRL_8BITBUS;
> + io_val &= ~SDHCI_CTRL_4BITBUS;
> + } else if (val & SDHCI_CTRL_4BITBUS) {
> + io_val &= ~ESDHC_SDHCI_CTRL_8BITBUS;
> + io_val |= SDHCI_CTRL_4BITBUS;
> + } else {
> + io_val &= ~ESDHC_SDHCI_CTRL_8BITBUS;
> + io_val &= ~SDHCI_CTRL_4BITBUS;
> + }
> +
> + /* Configure the DMA */
> + if (val & SDHCI_CTRL_DMA_MASK)
> + io_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
> + writel(io_val, host->ioaddr + SDHCI_HOST_CONTROL);
> +
> + return;
> + }
> +
> + io_val = readl(host->ioaddr + (reg / 4) * 4);
> + io_val &= ~(0xFF << ((reg % 4) * 8));
> + io_val |= val << ((reg % 4) * 8);
> +
> + writel(io_val, host->ioaddr + (reg / 4) * 4);
> +}
> +
> +static unsigned int sdhci_imx_get_max_clock(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +
> + return clk_get_rate(pltfm_host->clk);
> +}
> +
> +static unsigned int sdhci_imx_get_min_clock(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +
> + return clk_get_rate(pltfm_host->clk) / 256 / 16;
> +}
> +
> +static unsigned int sdhci_imx_get_timeout_clock(struct sdhci_host *host)
> +{
> + return sdhci_imx_get_max_clock(host) / 1000000;
> +}
> +
> +static unsigned int sdhci_imx_get_ro(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +
> + return gpio_get_value(pltfm_host->wp_gpio);
> +}
> +
> +static void sdhci_imx_set_clock(struct sdhci_host *host, unsigned int clock)
> +{
> + int pre_div = 2;
> + int div = 1;
> + u32 temp;
> +
> + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
> + temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
> + | ESDHC_CLOCK_MASK);
> + sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
> +
> + if (clock == 0)
> + goto out;
> +
> + while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
> + pre_div *= 2;
> +
> + while (host->max_clk / pre_div / div > clock && div < 16)
> + div++;
> +
> + dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
> + clock, host->max_clk / pre_div / div);
> +
> + pre_div >>= 1;
> + div--;
> +
> + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
> + temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
> + | (div << ESDHC_DIVIDER_SHIFT)
> + | (pre_div << ESDHC_PREDIV_SHIFT));
> + sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
> + mdelay(10);
> +out:
> + host->clock = clock;
> +}
> +
> +static int sdhci_imx_enable_dma(struct sdhci_host *host)
> +{
> + u32 ctrl;
> +
> + ctrl = readl(host->ioaddr + SDHCI_HOST_CONTROL);
> + ctrl &= ~(SDHCI_CTRL_DMA_MASK << 5);
> + if ((host->flags & SDHCI_REQ_USE_DMA) &&
> + (host->flags & SDHCI_USE_ADMA))
> + ctrl |= (SDHCI_CTRL_ADMA32 << 8);
> + else if (host->flags & SDHCI_REQ_USE_DMA)
> + ctrl |= (SDHCI_CTRL_SDMA << 8);
> +
> + writel(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
> +
> + if (host->flags & SDHCI_REQ_USE_DMA)
> + writel(FSL_SDHCI_WML_64_WORDS,
> + host->ioaddr + FSL_SDHCI_WML);
> + else
> + writel(FSL_SDHCI_WML_128_WORDS,
> + host->ioaddr + FSL_SDHCI_WML);
> + return 0;
> +}
> +
> +static int __match_sdhci_imx(struct device *dev, void *data)
> +{
> + return !strncmp(dev_name(dev), "imx-sdhci", 9);
> +}
> +static int sdhci_imx_init(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct clk *clk;
> + struct device *dev;
> +
Not sure how many device is served, what driver get here is only
imx-sdhci.0, but imx-sdhci.1, imx-sdhci.2 will never come up.
So this method only right for one device.
> + dev = device_find_child(mmc_dev(host->mmc), NULL, __match_sdhci_imx);
> + clk = clk_get(dev, "imx_sdhc_clk");
> + if (IS_ERR(clk)) {
> + dev_err(mmc_dev(host->mmc), "clk err\n");
> + return -ENODEV;
> + }
> + clk_enable(clk);
> + pltfm_host->clk = clk;
> + dev_dbg(dev, "SDHC clock:%lu\n", clk_get_rate(clk));
> +
> + return 0;
> +}
> +
> +static void sdhci_imx_exit(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +
> + clk_disable(pltfm_host->clk);
> + clk_put(pltfm_host->clk);
> +}
> +
> +
> +static struct sdhci_ops sdhci_imx_ops = {
> + .read_l = sdhci_imx_readl,
> + .read_w = sdhci_imx_readw,
> + .read_b = sdhci_imx_readb,
> + .write_l = sdhci_imx_writel,
> + .write_w = sdhci_imx_writew,
> + .write_b = sdhci_imx_writeb,
> + .set_clock = sdhci_imx_set_clock,
> + .enable_dma = sdhci_imx_enable_dma,
> + .get_max_clock = sdhci_imx_get_max_clock,
> + .get_min_clock = sdhci_imx_get_min_clock,
> + .get_timeout_clock = sdhci_imx_get_timeout_clock,
> + .get_ro = sdhci_imx_get_ro,
> +};
> +
> +struct sdhci_pltfm_data sdhci_imx_pdata = {
> + .ops = &sdhci_imx_ops,
> + .quirks = SDHCI_QUIRK_BROKEN_ADMA
> + | SDHCI_QUIRK_32BIT_DMA_ADDR
> + | SDHCI_QUIRK_32BIT_ADMA_SIZE
> + | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
> + | SDHCI_QUIRK_NO_BUSY_IRQ
> + | SDHCI_QUIRK_BROKEN_CARD_DETECTION
> + | SDHCI_QUIRK_NONSTANDARD_CLOCK
> + | SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET,
> + .init = sdhci_imx_init,
> + .exit = sdhci_imx_exit,
> +};
> --
> 1.7.0
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
More information about the linux-arm-kernel
mailing list