[PATCH v6 6/7] omap: zoom: add fixed regulator device for wlan
Ohad Ben-Cohen
ohad at wizery.com
Wed Sep 15 19:32:09 EDT 2010
Add a fixed regulator vmmc device to enable power control
of the wl1271 wlan device.
Signed-off-by: Ohad Ben-Cohen <ohad at wizery.com>
---
arch/arm/mach-omap2/board-zoom-peripherals.c | 35 ++++++++++++++++++++++++++
1 files changed, 35 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 6b39849..de88635 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -16,6 +16,7 @@
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -27,6 +28,8 @@
#include "mux.h"
#include "hsmmc.h"
+#define OMAP_ZOOM_WLAN_PMENA_GPIO (101)
+
/* Zoom2 has Qwerty keyboard*/
static int board_keymap[] = {
KEY(0, 0, KEY_E),
@@ -106,6 +109,11 @@ static struct regulator_consumer_supply zoom_vmmc2_supply = {
.supply = "vmmc",
};
+static struct regulator_consumer_supply zoom_vmmc3_supply = {
+ .supply = "vmmc",
+ .dev_name = "mmci-omap-hs.2",
+};
+
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data zoom_vmmc1 = {
.constraints = {
@@ -151,6 +159,32 @@ static struct regulator_init_data zoom_vsim = {
.consumer_supplies = &zoom_vsim_supply,
};
+static struct regulator_init_data zoom_vmmc3 = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &zoom_vmmc3_supply,
+};
+
+static struct fixed_voltage_config zoom_vwlan = {
+ .supply_name = "vwl1271",
+ .microvolts = 1800000, /* 1.8V */
+ .gpio = OMAP_ZOOM_WLAN_PMENA_GPIO,
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+ .init_data = &zoom_vmmc3,
+};
+
+static struct platform_device omap_vwlan_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &zoom_vwlan,
+ },
+};
+
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "external",
@@ -280,6 +314,7 @@ static void enable_board_wakeup_source(void)
void __init zoom_peripherals_init(void)
{
omap_i2c_init();
+ platform_device_register(&omap_vwlan_device);
usb_musb_init(&musb_board_data);
enable_board_wakeup_source();
}
--
1.7.0.4
More information about the linux-arm-kernel
mailing list