[PATCH v2 RESEND] ARM: s3c2440: various fixes in Kconfig file

Ben Dooks ben-linux at fluff.org
Tue Sep 7 19:33:28 EDT 2010


On 03/09/10 19:18, Abdoulaye Walsimou Gaye wrote:
> * kconfig symbols defined in arch/arm/mach-s3c2440/Kconfig are only available
>   when ARCH_S3C2410 is selected, so no need to make some of them depend
>   on ARCH_S3C2410.
> * CPU_S3C24405B is used nowhere in the whole source tree, so remove it from
>   "config S3C2440_DMA".
> * mini2440: select SND_S3C24XX_SOC as it is needed in order be able to select
>   SND_S3C24XX_SOC_S3C24XX_UDA134X.
> Those fixes avoid the following warnings at make time:
> scripts/kconfig/qconf arch/arm/Kconfig
> warning: (MACH_MINI2440 && ARCH_S3C2410) selects SND_S3C24XX_SOC_S3C24XX_UDA134X which has unmet direct dependencies (SND_S3C24XX_SOC && ARCH_S3C2410)
> warning: (CPU_S3C2440 && ARCH_S3C2410 && S3C2410_DMA) selects S3C2440_DMA which has unmet direct dependencies (ARCH_S3C2410 && CPU_S3C24405B)
> warning: (CPU_S3C2440 && ARCH_S3C2410 || CPU_S3C2442 && ARCH_S3C2410) selects CPU_S3C244X which has unmet direct dependencies (!ARCH_S3C2410)
> 
> Signed-off-by: Abdoulaye Walsimou Gaye <awg at embtoolkit.org>
> ---
> 
> changes since v1:
> include warnings observed without this patch
> 
>  arch/arm/mach-s3c2440/Kconfig |    6 ++----
>  1 files changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
> index cd8e7de..e84ff1e 100644
> --- a/arch/arm/mach-s3c2440/Kconfig
> +++ b/arch/arm/mach-s3c2440/Kconfig
> @@ -4,7 +4,6 @@
>  
>  config CPU_S3C2440
>  	bool
> -	depends on ARCH_S3C2410
>  	select CPU_ARM920T
>  	select S3C_GPIO_PULL_UP
>  	select S3C2410_CLOCK
> @@ -18,7 +17,6 @@ config CPU_S3C2440
>  
>  config CPU_S3C2442
>  	bool
> -	depends on ARCH_S3C2410
>  	select CPU_ARM920T
>  	select S3C2410_CLOCK
>  	select S3C2410_GPIO
> @@ -30,7 +28,7 @@ config CPU_S3C2442
>  
>  config CPU_S3C244X
>  	bool
> -	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
> +	depends on CPU_S3C2440 || CPU_S3C2442
>  	help
>  	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
>  
> @@ -72,7 +70,6 @@ config S3C2440_PLL_16934400
>  
>  config S3C2440_DMA
>  	bool
> -	depends on ARCH_S3C2410 && CPU_S3C24405B

i think the CPU_S3C24405B should be changed to CPU_S3C2440

>  	help
>  	  Support for S3C2440 specific DMA code5A
>  
> @@ -181,6 +178,7 @@ config MACH_MINI2440
>  	select CPU_S3C2440
>  	select EEPROM_AT24
>  	select LEDS_TRIGGER_BACKLIGHT
> +	select SND_S3C24XX_SOC
>  	select SND_S3C24XX_SOC_S3C24XX_UDA134X
>  	select S3C_DEV_NAND
>  	select S3C_DEV_USB_HOST

I don't like things forcing other kconfig stuff on if it is
not required for the system to build and function minimally.

c



More information about the linux-arm-kernel mailing list