[PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1

kishore kadiyala kishorek.kadiyala at gmail.com
Mon Sep 27 03:55:01 EDT 2010


Cc: Samuel Ortiz <sameo at linux.intel.com>

On Fri, Sep 24, 2010 at 10:43 PM, kishore kadiyala
<kishore.kadiyala at ti.com> wrote:
> Adding card detect callback function and card detect configuration
> function for MMC1 Controller on OMAP4.
>
> Card detect configuration function does initial configuration of the
> MMC Control & PullUp-PullDown registers of Phoenix.
>
> For MMC1 Controller, card detect interrupt source is
> twl6030 which is non-gpio. The card detect call back function provides
> card present/absent status by reading MMC Control register present
> on twl6030.
>
> Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect,
> the suspend/resume initialization which was done in omap_hsmmc_gpio_init
> previously is moved to the probe thus making it generic for both OMAP3 & OMAP4.
>
> Cc: Tony Lindgren <tony at atomide.com>
> Cc: Andrew Morton <akpm at linux-foundation.org>
> Cc: Madhusudhan Chikkature <madhu.cr at ti.com>
> Cc: Adrian Hunter <adrian.hunter at nokia.com>
> Signed-off-by: Kishore Kadiyala <kishore.kadiyala at ti.com>
> ---
>  arch/arm/mach-omap2/board-4430sdp.c |    7 +++-
>  drivers/mfd/twl6030-irq.c           |   73 +++++++++++++++++++++++++++++++++++
>  drivers/mmc/host/omap_hsmmc.c       |    4 +-
>  include/linux/i2c/twl.h             |   31 +++++++++++++++
>  4 files changed, 112 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> index 9447644..a49f285 100644
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@ -227,9 +227,14 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev)
>        struct omap_mmc_platform_data *pdata = dev->platform_data;
>
>        /* Setting MMC1 Card detect Irq */
> -       if (pdev->id == 0)
> +       if (pdev->id == 0) {
> +               ret = twl6030_mmc_card_detect_config();
> +               if (ret)
> +                       pr_err("Failed configuring MMC1 card detect\n");
>                pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
>                                                MMCDETECT_INTR_OFFSET;
> +               pdata->slots[0].card_detect = twl6030_mmc_card_detect;
> +       }
>        return ret;
>  }
>
> diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
> index 10bf228..2d3bb82 100644
> --- a/drivers/mfd/twl6030-irq.c
> +++ b/drivers/mfd/twl6030-irq.c
> @@ -36,6 +36,7 @@
>  #include <linux/irq.h>
>  #include <linux/kthread.h>
>  #include <linux/i2c/twl.h>
> +#include <linux/platform_device.h>
>
>  /*
>  * TWL6030 (unlike its predecessors, which had two level interrupt handling)
> @@ -223,6 +224,78 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
>  }
>  EXPORT_SYMBOL(twl6030_interrupt_mask);
>
> +int twl6030_mmc_card_detect_config(void)
> +{
> +       int ret;
> +       u8 reg_val = 0;
> +
> +       /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
> +       twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
> +                                               REG_INT_MSK_LINE_B);
> +       twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
> +                                               REG_INT_MSK_STS_B);
> +       /*
> +        * Intially Configuring MMC_CTRL for receving interrupts &
> +        * Card status on TWL6030 for MMC1
> +        */
> +       ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val, TWL6030_MMCCTRL);
> +       if (ret < 0) {
> +               pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
> +               return ret;
> +       }
> +       reg_val &= ~VMMC_AUTO_OFF;
> +       reg_val |= SW_FC;
> +       ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
> +       if (ret < 0) {
> +               pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
> +               return ret;
> +       }
> +
> +       /* Configuring PullUp-PullDown register */
> +       ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val,
> +                                               TWL6030_CFG_INPUT_PUPD3);
> +       if (ret < 0) {
> +               pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
> +                                                                       ret);
> +               return ret;
> +       }
> +       reg_val &= ~(MMC_PU | MMC_PD);
> +       ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
> +                                               TWL6030_CFG_INPUT_PUPD3);
> +       if (ret < 0) {
> +               pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
> +                                                                       ret);
> +               return ret;
> +       }
> +       return 0;
> +}
> +EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
> +
> +int twl6030_mmc_card_detect(struct device *dev, int slot)
> +{
> +       int ret = -EIO;
> +       u8 read_reg = 0;
> +       struct platform_device *pdev = to_platform_device(dev);
> +
> +       if (pdev->id) {
> +               /* TWL6030 provide's Card detect support for
> +                * only MMC1 controller.
> +                */
> +               pr_err("Unkown MMC controller %d in %s\n", pdev->id, __func__);
> +               return ret;
> +       }
> +       /*
> +        * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1
> +        * 0 - Card not present ,1 - Card present
> +        */
> +       ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
> +                                               TWL6030_MMCCTRL);
> +       if (ret >= 0)
> +               ret = read_reg & STS_MMC;
> +       return ret;
> +}
> +EXPORT_SYMBOL(twl6030_mmc_card_detect);
> +
>  int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
>  {
>
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 562dbbb..a51894d 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -466,8 +466,6 @@ static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata)
>        int ret;
>
>        if (gpio_is_valid(pdata->slots[0].switch_pin)) {
> -               pdata->suspend = omap_hsmmc_suspend_cdirq;
> -               pdata->resume = omap_hsmmc_resume_cdirq;
>                if (pdata->slots[0].cover)
>                        pdata->slots[0].get_cover_state =
>                                        omap_hsmmc_get_cover_state;
> @@ -2211,6 +2209,8 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
>                                "Unable to grab MMC CD IRQ\n");
>                        goto err_irq_cd;
>                }
> +               pdata->suspend = omap_hsmmc_suspend_cdirq;
> +               pdata->resume = omap_hsmmc_resume_cdirq;
>        }
>
>        omap_hsmmc_disable_irq(host);
> diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
> index 6de90bf..e64894c 100644
> --- a/include/linux/i2c/twl.h
> +++ b/include/linux/i2c/twl.h
> @@ -141,6 +141,16 @@
>  #define TWL6030_CHARGER_CTRL_INT_MASK  0x10
>  #define TWL6030_CHARGER_FAULT_INT_MASK         0x60
>
> +#define TWL6030_MMCCTRL                0xEE
> +#define VMMC_AUTO_OFF                  (0x1 << 3)
> +#define SW_FC                          (0x1 << 2)
> +#define STS_MMC                        0x1
> +
> +#define TWL6030_CFG_INPUT_PUPD3        0xF2
> +#define MMC_PU                         (0x1 << 3)
> +#define MMC_PD                         (0x1 << 2)
> +
> +
>
>  #define TWL4030_CLASS_ID               0x4030
>  #define TWL6030_CLASS_ID               0x6030
> @@ -173,6 +183,27 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
>  int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
>  int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
>
> +/* Card detect Configuration for MMC1 Controller on OMAP4 */
> +#ifdef CONFIG_TWL4030_CORE
> +int twl6030_mmc_card_detect_config(void);
> +#else
> +static inline int twl6030_mmc_card_detect_config(void)
> +{
> +       pr_debug("twl6030_mmc_card_detect_config not supported\n");
> +       return 0;
> +}
> +#endif
> +
> +/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
> +#ifdef CONFIG_TWL4030_CORE
> +int twl6030_mmc_card_detect(struct device *dev, int slot);
> +#else
> +static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
> +{
> +       pr_debug("Call back twl6030_mmc_card_detect not supported\n");
> +       return -EIO;
> +}
> +#endif
>  /*----------------------------------------------------------------------*/
>
>  /*
> --
> 1.7.0.4
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>



More information about the linux-arm-kernel mailing list