[PATCH 3/4] ARM: S5PC110: add common FIMC setup code

[Marek Szyprowski]

Hello,

On 2010-09-06 13:16 Marek Vasut wrote:

> Dne Po 6. září 2010 05:50:43 Marek Szyprowski napsal(a):
>> Add common clocks setup code for FIMC devices on S5PV210 SoCs.
>>
>> Signed-off-by: Marek Szyprowski<m.szyprowski at samsung.com>
>> Signed-off-by: Kyungmin Park<kyungmin.park at samsung.com>
>> ---
>>   arch/arm/mach-s5pv210/Kconfig             |    6 ++++
>>   arch/arm/mach-s5pv210/Makefile            |    1 +
>>   arch/arm/mach-s5pv210/setup-fimc.c        |   46
>> +++++++++++++++++++++++++++++ arch/arm/plat-samsung/include/plat/fimc.h |
>>   24 +++++++++++++++
>>   4 files changed, 77 insertions(+), 0 deletions(-)
>>   create mode 100644 arch/arm/mach-s5pv210/setup-fimc.c
>>   create mode 100644 arch/arm/plat-samsung/include/plat/fimc.h
>>
>> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
>> index d3a3895..48489bb 100644
>> --- a/arch/arm/mach-s5pv210/Kconfig
>> +++ b/arch/arm/mach-s5pv210/Kconfig
>> @@ -37,6 +37,12 @@ config S5PV210_SETUP_FB_24BPP
>>   	help
>>             Common setup code for S5PV210 with an 24bpp RGB display helper.
>>
>> +config S5PV210_SETUP_FIMC
>> +	bool
>> +	help
>> +	  Compile common code for S5PV210 based machines to setup correct
>> +	  FIMC clock parameters.
>> +
>>   config S5PV210_SETUP_KEYPAD
>>   	bool
>>   	help
>> diff --git a/arch/arm/mach-s5pv210/Makefile
>> b/arch/arm/mach-s5pv210/Makefile index 05048c5..c13aef1 100644
>> --- a/arch/arm/mach-s5pv210/Makefile
>> +++ b/arch/arm/mach-s5pv210/Makefile
>> @@ -29,6 +29,7 @@ obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
>>   obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o
>>
>>   obj-$(CONFIG_S5PV210_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
>> +obj-$(CONFIG_S5PV210_SETUP_FIMC)	+= setup-fimc.o
>>   obj-$(CONFIG_S5PV210_SETUP_I2C1) 	+= setup-i2c1.o
>>   obj-$(CONFIG_S5PV210_SETUP_I2C2) 	+= setup-i2c2.o
>>   obj-$(CONFIG_S5PV210_SETUP_IDE)		+= setup-ide.o
>> diff --git a/arch/arm/mach-s5pv210/setup-fimc.c
>> b/arch/arm/mach-s5pv210/setup-fimc.c new file mode 100644
>> index 0000000..80c1ffe
>> --- /dev/null
>> +++ b/arch/arm/mach-s5pv210/setup-fimc.c
>> @@ -0,0 +1,46 @@
>> +/*
>> + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
>> + *		http://www.samsung.com/
>> + *
>> + * S5PV210 clock setup code for FIMC devices
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +#include<linux/device.h>
>> +#include<linux/clk.h>
>> +#include<linux/err.h>
>> +#include<plat/devs.h>
>> +#include<plat/fimc.h>
>> +
>> +int __init s5pv210_fimc_setup_clks(void)
>> +{
>> +	int err = 0;
>> +	int i;
>> +	struct clk *clk_fimc, *parent;
>> +
>> +	struct device *fimc_devs[] = {
>> +		&s5p_device_fimc0.dev,
>> +		&s5p_device_fimc1.dev,
>> +		&s5p_device_fimc2.dev
>> +	};
>> +
>> +	parent = clk_get(NULL, "mout_epll");
>> +	if (IS_ERR(parent))
>> +		return PTR_ERR(parent);
>> +
>> +	for (i = 0; err == 0&&  i<  ARRAY_SIZE(fimc_devs); i++) {
>> +		if (fimc_devs[i]) {
>> +			clk_fimc = clk_get(fimc_devs[i], "sclk_fimc");
>> +			if (IS_ERR(clk_fimc)) {
>> +				err = PTR_ERR(clk_fimc);
>
> I believe you should clk_put() the clocks that were already clk_get()-ed here.

They are, see clk_put after clk_set_parent.

> Cheers
>> +				break;
>> +			}
>> +			clk_set_parent(clk_fimc, parent);
>> +			clk_put(clk_fimc);
>> +		}
>> +	}
>> +	clk_put(parent);
>> +	return err;
>> +}
>> diff --git a/arch/arm/plat-samsung/include/plat/fimc.h
>> b/arch/arm/plat-samsung/include/plat/fimc.h new file mode 100644
>> index 0000000..2c06f37
>> --- /dev/null
>> +++ b/arch/arm/plat-samsung/include/plat/fimc.h
>> @@ -0,0 +1,24 @@
>> +/*
>> + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
>> + *		http://www.samsung.com/
>> + *
>> + * Common FIMC devices definitions and helper functions
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#ifndef __PLAT_SAMSUNG_FIMC_H
>> +#define __PLAT_SAMSUNG_FIMC_H __FILE__
>> +
>> +/**
>> + * s5pv210_fimc_setup_clks() - S5PV210/S5PC110 fimc clocks setup function
>> + *
>> + * Set correct parent clocks on machines which bootloaded did not
>> configured + * fimc clocks correctly. FIMC devices works properly only if
>> sourced from + * certain clock sources. "mout_epll" clock is the
>> recommended one. + */
>> +extern int s5pv210_fimc_setup_clks(void);
>> +
>> +#endif /* __PLAT_SAMSUNG_FIMC_H */
>

Best regards
-- 
Marek Szyprowski
Samsung Poland R&D Center