[PATCH 2/2] [ARM] Kirkwood: remove duplicated code in LaCie setup files
Simon Guinot
simon at sequanux.org
Sun Sep 19 09:33:59 EDT 2010
From: Simon Guinot <sguinot at lacie.com>
Signed-off-by: Simon Guinot <sguinot at lacie.com>
---
arch/arm/mach-kirkwood/Kconfig | 11 +++
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/d2net_v2-setup.c | 102 +---------------------
arch/arm/mach-kirkwood/lacie_v2-common.c | 127 ++++++++++++++++++++++++++++
arch/arm/mach-kirkwood/lacie_v2-common.h | 18 ++++
arch/arm/mach-kirkwood/netspace_v2-setup.c | 122 ++------------------------
arch/arm/mach-kirkwood/netxbig_v2-setup.c | 119 ++------------------------
7 files changed, 181 insertions(+), 319 deletions(-)
create mode 100644 arch/arm/mach-kirkwood/lacie_v2-common.c
create mode 100644 arch/arm/mach-kirkwood/lacie_v2-common.h
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 3410633..ce21806 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -90,40 +90,51 @@ config MACH_OPENRD_ULTIMATE
config MACH_NETSPACE_V2
bool "LaCie Network Space v2 NAS Board"
+ select LACIE_V2_COMMON
help
Say 'Y' here if you want your kernel to support the
LaCie Network Space v2 NAS.
config MACH_INETSPACE_V2
bool "LaCie Internet Space v2 NAS Board"
+ select LACIE_V2_COMMON
help
Say 'Y' here if you want your kernel to support the
LaCie Internet Space v2 NAS.
config MACH_NETSPACE_MAX_V2
bool "LaCie Network Space Max v2 NAS Board"
+ select LACIE_V2_COMMON
help
Say 'Y' here if you want your kernel to support the
LaCie Network Space Max v2 NAS.
config MACH_D2NET_V2
bool "LaCie d2 Network v2 NAS Board"
+ select LACIE_V2_COMMON
help
Say 'Y' here if you want your kernel to support the
LaCie d2 Network v2 NAS.
config MACH_NET2BIG_V2
bool "LaCie 2Big Network v2 NAS Board"
+ select LACIE_V2_COMMON
help
Say 'Y' here if you want your kernel to support the
LaCie 2Big Network v2 NAS.
config MACH_NET5BIG_V2
bool "LaCie 5Big Network v2 NAS Board"
+ select LACIE_V2_COMMON
help
Say 'Y' here if you want your kernel to support the
LaCie 5Big Network v2 NAS.
+config LACIE_V2_COMMON
+ bool
+ help
+ Common machine code for LaCie v2 Boards.
+
config MACH_T5325
bool "HP t5325 Thin Client"
help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 81d4f1b..452ebc5 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o
obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o
+obj-$(CONFIG_LACIE_V2_COMMON) += lacie_v2-common.o
obj-$(CONFIG_MACH_T5325) += t5325-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 310c6a0..cd62d0f 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -23,56 +23,19 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
#include <mach/kirkwood.h>
#include <mach/leds-ns2.h>
-#include <plat/time.h>
#include "common.h"
#include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device
- ****************************************************************************/
-
-static struct mtd_partition d2net_v2_flash_parts[] = {
- {
- .name = "u-boot",
- .size = MTDPART_SIZ_FULL,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- },
-};
-
-static const struct flash_platform_data d2net_v2_flash = {
- .type = "mx25l4005a",
- .name = "spi_flash",
- .parts = d2net_v2_flash_parts,
- .nr_parts = ARRAY_SIZE(d2net_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata d2net_v2_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &d2net_v2_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
+#include "lacie_v2-common.h"
/*****************************************************************************
* Ethernet
@@ -83,27 +46,6 @@ static struct mv643xx_eth_platform_data d2net_v2_ge00_data = {
};
/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
- .byte_len = SZ_4K / 8,
- .page_size = 16,
-};
-
-/*
- * i2c addr | chip | description
- * 0x50 | HT24LC04 | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata d2net_v2_i2c_info[] = {
- {
- I2C_BOARD_INFO("24c04", 0x50),
- .platform_data = &at24c04,
- }
-};
-
-/*****************************************************************************
* SATA
****************************************************************************/
@@ -111,22 +53,6 @@ static struct mv_sata_platform_data d2net_v2_sata_data = {
.n_ports = 2,
};
-#define D2NET_V2_GPIO_SATA0_POWER 16
-
-static void __init d2net_v2_sata_power_init(void)
-{
- int err;
-
- err = gpio_request(D2NET_V2_GPIO_SATA0_POWER, "SATA0 power");
- if (err == 0) {
- err = gpio_direction_output(D2NET_V2_GPIO_SATA0_POWER, 1);
- if (err)
- gpio_free(D2NET_V2_GPIO_SATA0_POWER);
- }
- if (err)
- pr_err("d2net_v2: failed to configure SATA0 power GPIO\n");
-}
-
/*****************************************************************************
* GPIO keys
****************************************************************************/
@@ -229,20 +155,6 @@ static struct platform_device d2net_v2_leds = {
};
/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void d2net_v2_timer_init(void)
-{
- kirkwood_tclk = 166666667;
- orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer d2net_v2_timer = {
- .init = d2net_v2_timer_init,
-};
-
-/*****************************************************************************
* General Setup
****************************************************************************/
@@ -288,18 +200,14 @@ static void __init d2net_v2_init(void)
kirkwood_init();
kirkwood_mpp_conf(d2net_v2_mpp_config);
- d2net_v2_sata_power_init();
+ lacie_v2_hdd_power_init(1);
kirkwood_ehci_init();
kirkwood_ge00_init(&d2net_v2_ge00_data);
kirkwood_sata_init(&d2net_v2_sata_data);
kirkwood_uart0_init();
- spi_register_board_info(d2net_v2_spi_slave_info,
- ARRAY_SIZE(d2net_v2_spi_slave_info));
- kirkwood_spi_init();
- kirkwood_i2c_init();
- i2c_register_board_info(0, d2net_v2_i2c_info,
- ARRAY_SIZE(d2net_v2_i2c_info));
+ lacie_v2_register_flash();
+ lacie_v2_register_i2c_devices();
platform_device_register(&d2net_v2_leds);
platform_device_register(&d2net_v2_gpio_leds);
@@ -319,5 +227,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
.init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &d2net_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
new file mode 100644
index 0000000..d3ea1b6
--- /dev/null
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <mach/irqs.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
+ ****************************************************************************/
+
+static struct mtd_partition lacie_v2_flash_parts[] = {
+ {
+ .name = "u-boot",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+};
+
+static const struct flash_platform_data lacie_v2_flash = {
+ .type = "mx25l4005a",
+ .name = "spi_flash",
+ .parts = lacie_v2_flash_parts,
+ .nr_parts = ARRAY_SIZE(lacie_v2_flash_parts),
+};
+
+static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &lacie_v2_flash,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+void __init lacie_v2_register_flash(void)
+{
+ spi_register_board_info(lacie_v2_spi_slave_info,
+ ARRAY_SIZE(lacie_v2_spi_slave_info));
+ kirkwood_spi_init();
+}
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+static struct at24_platform_data at24c04 = {
+ .byte_len = SZ_4K / 8,
+ .page_size = 16,
+};
+
+/*
+ * i2c addr | chip | description
+ * 0x50 | HT24LC04 | eeprom (512B)
+ */
+
+static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
+ {
+ I2C_BOARD_INFO("24c04", 0x50),
+ .platform_data = &at24c04,
+ }
+};
+
+void __init lacie_v2_register_i2c_devices(void)
+{
+ kirkwood_i2c_init();
+ i2c_register_board_info(0, lacie_v2_i2c_info,
+ ARRAY_SIZE(lacie_v2_i2c_info));
+}
+
+/*****************************************************************************
+ * Hard Disk power
+ ****************************************************************************/
+
+static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
+
+void __init lacie_v2_hdd_power_init(int hdd_num)
+{
+ int i;
+ int err;
+
+ /* Power up all hard disks. */
+ for (i = 0; i < hdd_num; i++) {
+ err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
+ if (err == 0) {
+ err = gpio_direction_output(
+ lacie_v2_gpio_hdd_power[i], 1);
+ /* Free the HDD power GPIOs. This allow user-space to
+ * configure them via the gpiolib sysfs interface. */
+ gpio_free(lacie_v2_gpio_hdd_power[i]);
+ }
+ if (err)
+ pr_err("Failed to power up HDD%d\n", i + 1);
+ }
+}
+
+/*****************************************************************************
+ * Timer
+ ****************************************************************************/
+
+static void lacie_v2_timer_init(void)
+{
+ kirkwood_tclk = 166666667;
+ orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
+}
+
+struct sys_timer lacie_v2_timer = {
+ .init = lacie_v2_timer_init,
+};
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
new file mode 100644
index 0000000..af52131
--- /dev/null
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+
+void lacie_v2_register_flash(void);
+void lacie_v2_register_i2c_devices(void);
+void lacie_v2_hdd_power_init(int hdd_num);
+
+extern struct sys_timer lacie_v2_timer;
+
+#endif
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index d26bf32..fed264d 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -24,56 +24,19 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
#include <mach/kirkwood.h>
#include <mach/leds-ns2.h>
-#include <plat/time.h>
#include "common.h"
#include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition netspace_v2_flash_parts[] = {
- {
- .name = "u-boot",
- .size = MTDPART_SIZ_FULL,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-};
-
-static const struct flash_platform_data netspace_v2_flash = {
- .type = "mx25l4005a",
- .name = "spi_flash",
- .parts = netspace_v2_flash_parts,
- .nr_parts = ARRAY_SIZE(netspace_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &netspace_v2_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
+#include "lacie_v2-common.h"
/*****************************************************************************
* Ethernet
@@ -84,27 +47,6 @@ static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
};
/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
- .byte_len = SZ_4K / 8,
- .page_size = 16,
-};
-
-/*
- * i2c addr | chip | description
- * 0x50 | HT24LC04 | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata netspace_v2_i2c_info[] = {
- {
- I2C_BOARD_INFO("24c04", 0x50),
- .platform_data = &at24c04,
- }
-};
-
-/*****************************************************************************
* SATA
****************************************************************************/
@@ -112,35 +54,6 @@ static struct mv_sata_platform_data netspace_v2_sata_data = {
.n_ports = 2,
};
-#define NETSPACE_V2_GPIO_SATA0_POWER 16
-#define NETSPACE_V2_GPIO_SATA1_POWER 17
-
-static void __init netspace_v2_sata_power_init(void)
-{
- int err;
-
- err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power");
- if (err == 0) {
- err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1);
- if (err)
- gpio_free(NETSPACE_V2_GPIO_SATA0_POWER);
- }
- if (err)
- pr_err("netspace_v2: failed to setup SATA0 power\n");
-
- if (machine_is_netspace_max_v2()) {
- err = gpio_request(NETSPACE_V2_GPIO_SATA1_POWER, "SATA1 power");
- if (err == 0) {
- err = gpio_direction_output(
- NETSPACE_V2_GPIO_SATA1_POWER, 1);
- if (err)
- gpio_free(NETSPACE_V2_GPIO_SATA1_POWER);
- }
- if (err)
- pr_err("netspace_v2: failed to setup SATA1 power\n");
- }
-}
-
/*****************************************************************************
* GPIO keys
****************************************************************************/
@@ -224,20 +137,6 @@ static struct platform_device netspace_v2_leds = {
};
/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void netspace_v2_timer_init(void)
-{
- kirkwood_tclk = 166666667;
- orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer netspace_v2_timer = {
- .init = netspace_v2_timer_init,
-};
-
-/*****************************************************************************
* General Setup
****************************************************************************/
@@ -291,18 +190,17 @@ static void __init netspace_v2_init(void)
kirkwood_init();
kirkwood_mpp_conf(netspace_v2_mpp_config);
- netspace_v2_sata_power_init();
+ if (machine_is_netspace_max_v2())
+ lacie_v2_hdd_power_init(2);
+ else
+ lacie_v2_hdd_power_init(1);
kirkwood_ehci_init();
kirkwood_ge00_init(&netspace_v2_ge00_data);
kirkwood_sata_init(&netspace_v2_sata_data);
kirkwood_uart0_init();
- spi_register_board_info(netspace_v2_spi_slave_info,
- ARRAY_SIZE(netspace_v2_spi_slave_info));
- kirkwood_spi_init();
- kirkwood_i2c_init();
- i2c_register_board_info(0, netspace_v2_i2c_info,
- ARRAY_SIZE(netspace_v2_i2c_info));
+ lacie_v2_register_flash();
+ lacie_v2_register_i2c_devices();
platform_device_register(&netspace_v2_leds);
platform_device_register(&netspace_v2_gpio_leds);
@@ -323,7 +221,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &netspace_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
#endif
@@ -335,7 +233,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &netspace_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
#endif
@@ -347,6 +245,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &netspace_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 2bd14c5..aec528d 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -23,55 +23,18 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
#include <mach/kirkwood.h>
-#include <plat/time.h>
#include "common.h"
#include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition netxbig_v2_flash_parts[] = {
- {
- .name = "u-boot",
- .size = MTDPART_SIZ_FULL,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-};
-
-static const struct flash_platform_data netxbig_v2_flash = {
- .type = "mx25l4005a",
- .name = "spi_flash",
- .parts = netxbig_v2_flash_parts,
- .nr_parts = ARRAY_SIZE(netxbig_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata netxbig_v2_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &netxbig_v2_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
+#include "lacie_v2-common.h"
/*****************************************************************************
* Ethernet
@@ -86,27 +49,6 @@ static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
};
/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
- .byte_len = SZ_4K / 8,
- .page_size = 16,
-};
-
-/*
- * i2c addr | chip | description
- * 0x50 | HT24LC04 | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata netxbig_v2_i2c_info[] = {
- {
- I2C_BOARD_INFO("24c04", 0x50),
- .platform_data = &at24c04,
- }
-};
-
-/*****************************************************************************
* SATA
****************************************************************************/
@@ -114,34 +56,6 @@ static struct mv_sata_platform_data netxbig_v2_sata_data = {
.n_ports = 2,
};
-static int __initdata netxbig_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
-
-static void __init netxbig_v2_sata_power_init(void)
-{
- int i;
- int err;
- int hdd_nb;
-
- if (machine_is_net2big_v2())
- hdd_nb = 2;
- else
- hdd_nb = 5;
-
- /* Power up all hard disks. */
- for (i = 0; i < hdd_nb; i++) {
- err = gpio_request(netxbig_v2_gpio_hdd_power[i], NULL);
- if (err == 0) {
- err = gpio_direction_output(
- netxbig_v2_gpio_hdd_power[i], 1);
- /* Free the HDD power GPIOs. This allow user-space to
- * configure them via the gpiolib sysfs interface. */
- gpio_free(netxbig_v2_gpio_hdd_power[i]);
- }
- if (err)
- pr_err("netxbig_v2: failed to power up HDD%d\n", i + 1);
- }
-}
-
/*****************************************************************************
* GPIO keys
****************************************************************************/
@@ -246,20 +160,6 @@ static struct platform_device netxbig_v2_gpio_buttons = {
*/
/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void netxbig_v2_timer_init(void)
-{
- kirkwood_tclk = 166666667;
- orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer netxbig_v2_timer = {
- .init = netxbig_v2_timer_init,
-};
-
-/*****************************************************************************
* General Setup
****************************************************************************/
@@ -366,7 +266,10 @@ static void __init netxbig_v2_init(void)
else
kirkwood_mpp_conf(net5big_v2_mpp_config);
- netxbig_v2_sata_power_init();
+ if (machine_is_net2big_v2())
+ lacie_v2_hdd_power_init(2);
+ else
+ lacie_v2_hdd_power_init(5);
kirkwood_ehci_init();
kirkwood_ge00_init(&netxbig_v2_ge00_data);
@@ -374,12 +277,8 @@ static void __init netxbig_v2_init(void)
kirkwood_ge01_init(&netxbig_v2_ge01_data);
kirkwood_sata_init(&netxbig_v2_sata_data);
kirkwood_uart0_init();
- spi_register_board_info(netxbig_v2_spi_slave_info,
- ARRAY_SIZE(netxbig_v2_spi_slave_info));
- kirkwood_spi_init();
- kirkwood_i2c_init();
- i2c_register_board_info(0, netxbig_v2_i2c_info,
- ARRAY_SIZE(netxbig_v2_i2c_info));
+ lacie_v2_register_flash();
+ lacie_v2_register_i2c_devices();
platform_device_register(&netxbig_v2_gpio_buttons);
@@ -398,7 +297,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &netxbig_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
#endif
@@ -410,6 +309,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &netxbig_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
#endif
--
1.6.3.1
More information about the linux-arm-kernel
mailing list