[PATCHv2 6/7] ARM: S5PC110: add support for otg usb gadget on Goni board

[Marek Szyprowski]

Add required platform definitions for s3c-hsotg driver to enable usb
gadget support on Samsung Goni board.

Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
 arch/arm/mach-s5pv210/Kconfig     |    1 +
 arch/arm/mach-s5pv210/mach-goni.c |    4 ++++
 2 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index b1f671d..f8bac5a 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -85,6 +85,7 @@ config MACH_GONI
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_I2C1
 	select S5P_DEV_ONENAND
+	select S3C_DEV_USB_HSOTG
 	select SAMSUNG_DEV_KEYPAD
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_I2C1
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 5677c4d..68e22f2 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -41,6 +41,7 @@
 #include <plat/iic.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
+#include <plat/clock.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define GONI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -569,6 +570,7 @@ static struct platform_device *goni_devices[] __initdata = {
 	&s3c_device_fb,
 	&s5p_device_onenand,
 	&goni_spi_gpio,
+	&s3c_device_usb_hsotg,
 	&goni_i2c_gpio_pmic,
 	&goni_device_gpiokeys,
 	&s5p_device_fimc0,
@@ -614,6 +616,8 @@ static void __init goni_machine_init(void)
 	samsung_keypad_set_platdata(&keypad_data);
 
 	platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
+
+	clk_xusbxti.rate = 24000000;
 }
 
 MACHINE_START(GONI, "GONI")
-- 
1.7.1.569.g6f426