[PATCH v2 6/6] ARM: pxa168: aspenite: add board support for keypad

[Mark F. Brown]

On Fri, Sep 3, 2010 at 10:12 PM, Marek Vasut <marek.vasut at gmail.com> wrote:
> Dne Čt 26. srpna 2010 17:27:37 Mark F. Brown napsal(a):
>> Signed-off-by: Mark F. Brown <mark.brown314 at gmail.com>
>
> Ditto, which is V2 and which are just resubmissions please ?
>> ---
>>  arch/arm/mach-mmp/aspenite.c |   27 +++++++++++++++++++++++++++
>>  1 files changed, 27 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
>> index 9e1bd6b..f04bae6 100644
>> --- a/arch/arm/mach-mmp/aspenite.c
>> +++ b/arch/arm/mach-mmp/aspenite.c
>> @@ -24,6 +24,8 @@
>>  #include <mach/pxa168.h>
>>  #include <mach/gpio.h>
>>  #include <video/pxa168fb.h>
>> +#include <linux/input.h>
>> +#include <plat/pxa27x_keypad.h>
>>
>>  #include "common.h"
>>
>> @@ -97,6 +99,13 @@ static unsigned long common_pin_config[] __initdata = {
>>       GPIO81_LCD_DD21,
>>       GPIO82_LCD_DD22,
>>       GPIO83_LCD_DD23,
>> +
>> +     /* Keypad */
>> +     GPIO109_KP_MKIN1,
>> +     GPIO110_KP_MKIN0,
>> +     GPIO111_KP_MKOUT7,
>> +     GPIO112_KP_MKOUT6,
>> +     GPIO121_KP_MKIN4,
>>  };
>>
>>  static struct smc91x_platdata smc91x_info = {
>> @@ -193,6 +202,23 @@ struct pxa168fb_mach_info aspenite_lcd_info = {
>>       .invert_pixclock        = 0,
>>  };
>>
>> +static unsigned int aspenite_matrix_key_map[] = {
>> +     KEY(0, 6, KEY_UP),      /* SW 4 */
>> +     KEY(0, 7, KEY_DOWN),    /* SW 5 */
>> +     KEY(1, 6, KEY_LEFT),    /* SW 6 */
>> +     KEY(1, 7, KEY_RIGHT),   /* SW 7 */
>> +     KEY(4, 6, KEY_ENTER),   /* SW 8 */
>> +     KEY(4, 7, KEY_ESC),     /* SW 9 */
>> +};
>> +
>> +static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata
>> = { + .matrix_key_rows        = 5,
>> +     .matrix_key_cols        = 8,
>> +     .matrix_key_map         = aspenite_matrix_key_map,
>> +     .matrix_key_map_size    = ARRAY_SIZE(aspenite_matrix_key_map),
>> +     .debounce_interval      = 30,
>> +};
>> +
>>  static void __init common_init(void)
>>  {
>>       mfp_config(ARRAY_AND_SIZE(common_pin_config));
>> @@ -203,6 +229,7 @@ static void __init common_init(void)
>>       pxa168_add_ssp(1);
>>       pxa168_add_nand(&aspenite_nand_info);
>>       pxa168_add_fb(&aspenite_lcd_info);
>> +     pxa168_add_keypad(&aspenite_keypad_info);
>>
>>       /* off-chip devices */
>>       platform_device_register(&smc91x_device);
>

Sorry I am new to this! If I am updating the patchset based on
community recommendations should I consider that the next version of
the patchset or something else? I think I am confused about the
distinction.

Thanks,
-- Mark
-- Mark