[PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
kishore kadiyala
kishore.kadiyala at ti.com
Fri Sep 24 13:13:20 EDT 2010
Adding card detect callback function and card detect configuration
function for MMC1 Controller on OMAP4.
Card detect configuration function does initial configuration of the
MMC Control & PullUp-PullDown registers of Phoenix.
For MMC1 Controller, card detect interrupt source is
twl6030 which is non-gpio. The card detect call back function provides
card present/absent status by reading MMC Control register present
on twl6030.
Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect,
the suspend/resume initialization which was done in omap_hsmmc_gpio_init
previously is moved to the probe thus making it generic for both OMAP3 & OMAP4.
Cc: Tony Lindgren <tony at atomide.com>
Cc: Andrew Morton <akpm at linux-foundation.org>
Cc: Madhusudhan Chikkature <madhu.cr at ti.com>
Cc: Adrian Hunter <adrian.hunter at nokia.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala at ti.com>
---
arch/arm/mach-omap2/board-4430sdp.c | 7 +++-
drivers/mfd/twl6030-irq.c | 73 +++++++++++++++++++++++++++++++++++
drivers/mmc/host/omap_hsmmc.c | 4 +-
include/linux/i2c/twl.h | 31 +++++++++++++++
4 files changed, 112 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 9447644..a49f285 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -227,9 +227,14 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev)
struct omap_mmc_platform_data *pdata = dev->platform_data;
/* Setting MMC1 Card detect Irq */
- if (pdev->id == 0)
+ if (pdev->id == 0) {
+ ret = twl6030_mmc_card_detect_config();
+ if (ret)
+ pr_err("Failed configuring MMC1 card detect\n");
pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
MMCDETECT_INTR_OFFSET;
+ pdata->slots[0].card_detect = twl6030_mmc_card_detect;
+ }
return ret;
}
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index 10bf228..2d3bb82 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -36,6 +36,7 @@
#include <linux/irq.h>
#include <linux/kthread.h>
#include <linux/i2c/twl.h>
+#include <linux/platform_device.h>
/*
* TWL6030 (unlike its predecessors, which had two level interrupt handling)
@@ -223,6 +224,78 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
}
EXPORT_SYMBOL(twl6030_interrupt_mask);
+int twl6030_mmc_card_detect_config(void)
+{
+ int ret;
+ u8 reg_val = 0;
+
+ /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
+ twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
+ REG_INT_MSK_LINE_B);
+ twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
+ REG_INT_MSK_STS_B);
+ /*
+ * Intially Configuring MMC_CTRL for receving interrupts &
+ * Card status on TWL6030 for MMC1
+ */
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
+ return ret;
+ }
+ reg_val &= ~VMMC_AUTO_OFF;
+ reg_val |= SW_FC;
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
+ return ret;
+ }
+
+ /* Configuring PullUp-PullDown register */
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val,
+ TWL6030_CFG_INPUT_PUPD3);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
+ ret);
+ return ret;
+ }
+ reg_val &= ~(MMC_PU | MMC_PD);
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
+ TWL6030_CFG_INPUT_PUPD3);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
+ ret);
+ return ret;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
+
+int twl6030_mmc_card_detect(struct device *dev, int slot)
+{
+ int ret = -EIO;
+ u8 read_reg = 0;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if (pdev->id) {
+ /* TWL6030 provide's Card detect support for
+ * only MMC1 controller.
+ */
+ pr_err("Unkown MMC controller %d in %s\n", pdev->id, __func__);
+ return ret;
+ }
+ /*
+ * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1
+ * 0 - Card not present ,1 - Card present
+ */
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
+ TWL6030_MMCCTRL);
+ if (ret >= 0)
+ ret = read_reg & STS_MMC;
+ return ret;
+}
+EXPORT_SYMBOL(twl6030_mmc_card_detect);
+
int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
{
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 562dbbb..a51894d 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -466,8 +466,6 @@ static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata)
int ret;
if (gpio_is_valid(pdata->slots[0].switch_pin)) {
- pdata->suspend = omap_hsmmc_suspend_cdirq;
- pdata->resume = omap_hsmmc_resume_cdirq;
if (pdata->slots[0].cover)
pdata->slots[0].get_cover_state =
omap_hsmmc_get_cover_state;
@@ -2211,6 +2209,8 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
"Unable to grab MMC CD IRQ\n");
goto err_irq_cd;
}
+ pdata->suspend = omap_hsmmc_suspend_cdirq;
+ pdata->resume = omap_hsmmc_resume_cdirq;
}
omap_hsmmc_disable_irq(host);
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 6de90bf..e64894c 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -141,6 +141,16 @@
#define TWL6030_CHARGER_CTRL_INT_MASK 0x10
#define TWL6030_CHARGER_FAULT_INT_MASK 0x60
+#define TWL6030_MMCCTRL 0xEE
+#define VMMC_AUTO_OFF (0x1 << 3)
+#define SW_FC (0x1 << 2)
+#define STS_MMC 0x1
+
+#define TWL6030_CFG_INPUT_PUPD3 0xF2
+#define MMC_PU (0x1 << 3)
+#define MMC_PD (0x1 << 2)
+
+
#define TWL4030_CLASS_ID 0x4030
#define TWL6030_CLASS_ID 0x6030
@@ -173,6 +183,27 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
+/* Card detect Configuration for MMC1 Controller on OMAP4 */
+#ifdef CONFIG_TWL4030_CORE
+int twl6030_mmc_card_detect_config(void);
+#else
+static inline int twl6030_mmc_card_detect_config(void)
+{
+ pr_debug("twl6030_mmc_card_detect_config not supported\n");
+ return 0;
+}
+#endif
+
+/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
+#ifdef CONFIG_TWL4030_CORE
+int twl6030_mmc_card_detect(struct device *dev, int slot);
+#else
+static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
+{
+ pr_debug("Call back twl6030_mmc_card_detect not supported\n");
+ return -EIO;
+}
+#endif
/*----------------------------------------------------------------------*/
/*
--
1.7.0.4
More information about the linux-arm-kernel
mailing list