[PATCH 6/6] mmc: sdhci-pltfm: add pltfm-driver for imx35/51
Chris Ball
cjb at laptop.org
Wed Sep 29 16:14:19 EDT 2010
Hi Wolfram,
On Wed, Sep 29, 2010 at 10:08:04PM +0200, Wolfram Sang wrote:
> This driver adds basic support for the esdhc-core found on e.g.
> imx35/51. It adds up to the pltfm-core.
>
> Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
> Acked-by: Anton Vorontsov <cbouatmailru at gmail.com>
> ---
>
> Changes since last version:
>
> * some more -imx suffixes added
> * reworked the clock-matching. Now matching the pdev
>
> drivers/mmc/host/Kconfig | 10 +++
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/sdhci-esdhc-imx.c | 143 ++++++++++++++++++++++++++++++++++++
> drivers/mmc/host/sdhci-pltfm.c | 3 +
> drivers/mmc/host/sdhci-pltfm.h | 1 +
> 5 files changed, 158 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mmc/host/sdhci-esdhc-imx.c
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 6f12d5d..3c8c286 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -143,6 +143,16 @@ config MMC_SDHCI_MV
>
> If unsure, say N.
>
> +config MMC_SDHCI_ESDHC_IMX
> + bool "SDHCI platform support for the Freescale eSDHC i.MX controller"
> + depends on MMC_SDHCI_PLTFM
> + select MMC_SDHCI_IO_ACCESSORS
> + help
> + This selects the Freescale eSDHC controller support on the platform
> + bus, found on platforms like mx35/51.
> +
> + If unsure, say N.
> +
> config MMC_SDHCI_S3C
> tristate "SDHCI support on Samsung S3C SoC"
> depends on MMC_SDHCI && PLAT_SAMSUNG
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index ef32c32..5f283b5 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -38,6 +38,7 @@ obj-$(CONFIG_MMC_USHC) += ushc.o
> obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-platform.o
> sdhci-platform-y := sdhci-pltfm.o
> sdhci-platform-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
> +sdhci-platform-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o
>
> obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
> sdhci-of-y := sdhci-of-core.o
> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
> new file mode 100644
> index 0000000..68cf78c
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -0,0 +1,143 @@
> +/*
> + * Freescale eSDHC i.MX controller driver for the platform bus.
> + *
> + * derived from the OF-version.
> + *
> + * Copyright (c) 2010 Pengutronix e.K.
> + * Author: Wolfram Sang <w.sang at pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/sdhci-pltfm.h>
> +#include "sdhci.h"
> +#include "sdhci-pltfm.h"
> +#include "sdhci-esdhc.h"
> +
> +static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
> +{
> + void __iomem *base = host->ioaddr + (reg & ~0x3);
> + u32 shift = (reg & 0x3) * 8;
> +
> + writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
> +}
> +
> +static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
> +{
> + if (unlikely(reg == SDHCI_HOST_VERSION))
> + reg ^= 2;
> +
> + return readw(host->ioaddr + reg);
> +}
> +
> +static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +
> + switch (reg) {
> + case SDHCI_TRANSFER_MODE:
> + /*
> + * Postpone this write, we must do it together with a
> + * command write that is down below.
> + */
> + pltfm_host->scratchpad = val;
> + return;
> + case SDHCI_COMMAND:
> + writel(val << 16 | pltfm_host->scratchpad,
> + host->ioaddr + SDHCI_TRANSFER_MODE);
> + return;
> + case SDHCI_BLOCK_SIZE:
> + val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
> + break;
> + }
> + esdhc_clrset_le(host, 0xffff, val, reg);
> +}
> +
> +static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
> +{
> + u32 new_val;
> +
> + switch (reg) {
> + case SDHCI_POWER_CONTROL:
> + /*
> + * FSL put some DMA bits here
> + * If your board has a regulator, code should be here
> + */
> + return;
> + case SDHCI_HOST_CONTROL:
> + /* FSL messed up here, so we can just keep those two */
> + new_val = val & (SDHCI_CTRL_LED | SDHCI_CTRL_4BITBUS);
> + /* ensure the endianess */
> + new_val |= ESDHC_HOST_CONTROL_LE;
> + /* DMA mode bits are shifted */
> + new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
> +
> + esdhc_clrset_le(host, 0xffff, new_val, reg);
> + return;
> + }
> + esdhc_clrset_le(host, 0xff, val, reg);
> +}
> +
> +static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +
> + return clk_get_rate(pltfm_host->clk);
> +}
> +
> +static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +
> + return clk_get_rate(pltfm_host->clk) / 256 / 16;
> +}
> +
> +static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pdata)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct clk *clk;
> +
> + clk = clk_get(mmc_dev(host->mmc), NULL);
> + if (IS_ERR(clk)) {
> + dev_err(mmc_dev(host->mmc), "clk err\n");
> + return -ENODEV;
> + }
Is there a reason to return -ENODEV instead of PTR_ERR(clk)?
Patchset is looking good, thanks very much for keeping work going
on -pltfm,
--
Chris Ball <cjb at laptop.org> <http://printf.net/>
One Laptop Per Child
More information about the linux-arm-kernel
mailing list