[PATCH 1/3] plat-nomadik: MTU timer
Jonas Aaberg
jonas.aberg at stericsson.com
Thu Sep 2 03:30:31 EDT 2010
timer0 to 3 are all on mtu block 0, so don't calculate the clock event
rate based upon mtu block 1's clock speed.
Acked-by: Linus Walleij <linus.walleij at stericsson.com>
Acked-by: Alessandro Rubini <rubini at unipv.it>
Signed-off-by: Jonas Aaberg <jonas.aberg at stericsson.com>
---
arch/arm/plat-nomadik/timer.c | 16 ++--------------
1 files changed, 2 insertions(+), 14 deletions(-)
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index ea3ca86..d673888 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -131,17 +131,12 @@ void __init nmdk_timer_init(void)
{
unsigned long rate;
struct clk *clk0;
- struct clk *clk1;
u32 cr;
clk0 = clk_get_sys("mtu0", NULL);
BUG_ON(IS_ERR(clk0));
- clk1 = clk_get_sys("mtu1", NULL);
- BUG_ON(IS_ERR(clk1));
-
clk_enable(clk0);
- clk_enable(clk1);
/*
* Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
@@ -170,15 +165,8 @@ void __init nmdk_timer_init(void)
pr_err("timer: failed to initialize clock source %s\n",
nmdk_clksrc.name);
- /* Timer 1 is used for events, fix according to rate */
- cr = MTU_CRn_32BITS;
- rate = clk_get_rate(clk1);
- if (rate > 16 << 20) {
- rate /= 16;
- cr |= MTU_CRn_PRESCALE_16;
- } else {
- cr |= MTU_CRn_PRESCALE_1;
- }
+ /* Timer 1 is used for events */
+
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
--
1.6.3.3
More information about the linux-arm-kernel
mailing list