[PATCH 05/10] omap: pm-debug: Move common debug code to pm-debug.c

Kevin Hilman khilman at deeprootsystems.com
Wed Sep 15 19:55:41 EDT 2010


From: Santosh Shilimkar <santosh.shilimkar at ti.com>

This patch moves omap2_pm_wakeup_on_timer() and pm debug entries
form pm34xx.c to pm-debug.c and export it, so that it is available
to other OMAPs

Signed-off-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
Signed-off-by: Kevin Hilman <khilman at deeprootsystems.com>
---
 arch/arm/mach-omap2/pm-debug.c |   18 ++++++++++++++++++
 arch/arm/mach-omap2/pm.h       |    2 ++
 arch/arm/mach-omap2/pm34xx.c   |   18 ------------------
 3 files changed, 20 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 056ff17..655f9df 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -31,6 +31,7 @@
 #include <plat/board.h>
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>
+#include <plat/dmtimer.h>
 
 #include "prm.h"
 #include "cm.h"
@@ -353,6 +354,23 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
 	pwrdm->timer = t;
 }
 
+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+	u32 tick_rate, cycles;
+
+	if (!seconds && !milliseconds)
+		return;
+
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+	omap_dm_timer_stop(gptimer_wakeup);
+	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+	pr_info("PM: Resume timer in %u.%03u secs"
+		" (%d ticks at %d ticks/sec.)\n",
+		seconds, milliseconds, cycles, tick_rate);
+}
+
 static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
 {
 	struct seq_file *s = (struct seq_file *)user;
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 3de6ece..4fd021f 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -48,9 +48,11 @@ extern struct omap_dm_timer *gptimer_wakeup;
 
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds);
 extern int omap2_pm_debug;
 #else
 #define omap2_pm_dump(mode, resume, us)		do {} while (0);
+#define omap2_pm_wakeup_on_timer(seconds, milliseconds)	do {} while (0);
 #define omap2_pm_debug				0
 #endif
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index bb2ba1e..bc24fbd 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -38,7 +38,6 @@
 #include <plat/prcm.h>
 #include <plat/gpmc.h>
 #include <plat/dma.h>
-#include <plat/dmtimer.h>
 
 #include <asm/tlbflush.h>
 
@@ -550,23 +549,6 @@ out:
 #ifdef CONFIG_SUSPEND
 static suspend_state_t suspend_state;
 
-static void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
-	u32 tick_rate, cycles;
-
-	if (!seconds && !milliseconds)
-		return;
-
-	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
-	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
-	omap_dm_timer_stop(gptimer_wakeup);
-	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
-	pr_info("PM: Resume timer in %u.%03u secs"
-		" (%d ticks at %d ticks/sec.)\n",
-		seconds, milliseconds, cycles, tick_rate);
-}
-
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
-- 
1.7.2.1




More information about the linux-arm-kernel mailing list