[PATCH 5/6] ARM: Don't set TLB ops broadcasting on UP ARMv7
Russell King - ARM Linux
linux at arm.linux.org.uk
Thu Sep 2 12:57:56 EDT 2010
On Thu, Sep 02, 2010 at 09:22:20AM -0700, Tony Lindgren wrote:
> >From 8b22546af2ba9a0d96c2f419bfcec1f3c01a414d Mon Sep 17 00:00:00 2001
> From: Tony Lindgren <tony at atomide.com>
> Date: Mon, 30 Aug 2010 14:03:28 -0700
> Subject: [PATCH 5/6] ARM: Don't set TLB ops broadcasting on UP ARMv7
>
> Don't set TLB ops broadcasting on UP ARMv7. Looks like these bits
> are also different on A8 and A9.
This is already taken care of.
> diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
> index 07fc660..51a063d 100644
> --- a/arch/arm/mm/proc-v7.S
> +++ b/arch/arm/mm/proc-v7.S
> @@ -191,7 +191,8 @@ __v7_setup:
> UP(mov r0, #(1 << 6)) @ fake it for UP
If it's UP, we set r0 to 1 << 6, which...
> tst r0, #(1 << 6) @ SMP/nAMP mode enabled?
means this test produces a non-zero result.
> orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and
> - mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting
And therefore these instructions will not be executed.
More information about the linux-arm-kernel
mailing list