[PATCH v3 4/5] mfd: regulator: max8998: voltages and GPIOs defined at platform data structure

Samuel Ortiz sameo at linux.intel.com
Mon Sep 27 14:43:37 EDT 2010


Hi Lukasz,

On Mon, Sep 27, 2010 at 02:32:26PM +0200, Lukasz Majewski wrote:
> Signed-off-by: Lukasz Majewski <l.majewski at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
Fine with me:
Acked-by: Samuel Ortiz <sameo at linux.intel.com>

Cheers,
Samuel.


> ---
>  include/linux/mfd/max8998.h |   12 ++++++++++++
>  1 files changed, 12 insertions(+), 0 deletions(-)
> 
> diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
> index d47ed4c..f8c9f88 100644
> --- a/include/linux/mfd/max8998.h
> +++ b/include/linux/mfd/max8998.h
> @@ -70,12 +70,24 @@ struct max8998_regulator_data {
>   * @num_regulators: number of regultors used
>   * @irq_base: base IRQ number for max8998, required for IRQs
>   * @ono: power onoff IRQ number for max8998
> + * @buck1_max_voltage1: BUCK1 maximum alowed voltage register 1
> + * @buck1_max_voltage2: BUCK1 maximum alowed voltage register 2
> + * @buck2_max_voltage: BUCK2 maximum alowed voltage
> + * @buck1_set1: BUCK1 gpio pin 1 to set output voltage
> + * @buck1_set2: BUCK1 gpio pin 2 to set output voltage
> + * @buck2_set3: BUCK2 gpio pin to set output voltage
>   */
>  struct max8998_platform_data {
>  	struct max8998_regulator_data	*regulators;
>  	int				num_regulators;
>  	int				irq_base;
>  	int				ono;
> +	int                             buck1_max_voltage1;
> +	int                             buck1_max_voltage2;
> +	int                             buck2_max_voltage;
> +	int				buck1_set1;
> +	int				buck1_set2;
> +	int				buck2_set3;
>  };
>  
>  #endif /*  __LINUX_MFD_MAX8998_H */
> -- 
> 1.7.1
> 

-- 
Intel Open Source Technology Centre
http://oss.intel.com/



More information about the linux-arm-kernel mailing list