[PATCH] Fixing ethernet driver compilation error for i.MX32 ADS board
Ian Lartey
ian at opensource.wolfsonmicro.com
Thu Sep 23 10:38:15 EDT 2010
Revert "ARM: mx3/mx31ads: fold board header in its only user"
This reverts commit ccfa7c269843001077df02d98918c6c9bde91395.
As the board header is also used cs89x0 ethernet driver by the i.MX32 ADS.
Signed-off-by: Ian Lartey <ian at opensource.wolfsonmicro.com>
---
arch/arm/mach-mx3/mach-mx31ads.c | 43 ++-------
arch/arm/plat-mxc/include/mach/board-mx31ads.h | 117 ++++++++++++++++++++++++
2 files changed, 124 insertions(+), 36 deletions(-)
create mode 100644 arch/arm/plat-mxc/include/mach/board-mx31ads.h
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index 94b3e7c..7d13e99 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -29,6 +29,7 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
+#include <mach/board-mx31ads.h>
#include <mach/iomux-mx3.h>
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -40,42 +41,12 @@
#include "devices-imx31.h"
#include "devices.h"
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
-/* Offsets for the PBC Controller register */
-
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS 0x000016
-
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS 0x000018
-
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET 0x00001A
-
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR 0x00001C
-
-/* External UART A */
-#define PBC_SC16C652_UARTA 0x010000
-
-/* External UART B */
-#define PBC_SC16C652_UARTB 0x010010
-
-#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-
-#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11)
-
-#define MXC_MAX_EXP_IO_LINES 16
-/*
- * This file contains the board-specific initialization routines.
+/*!
+ * @file mx31ads.c
+ *
+ * @brief This file contains the board-specific initialization routines.
+ *
+ * @ingroup System
*/
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
new file mode 100644
index 0000000..095a199
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
+
+#include <mach/hardware.h>
+
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
+/* Offsets for the PBC Controller register */
+
+/* PBC Board status register offset */
+#define PBC_BSTAT 0x000002
+
+/* PBC Board control register 1 set address */
+#define PBC_BCTRL1_SET 0x000004
+
+/* PBC Board control register 1 clear address */
+#define PBC_BCTRL1_CLEAR 0x000006
+
+/* PBC Board control register 2 set address */
+#define PBC_BCTRL2_SET 0x000008
+
+/* PBC Board control register 2 clear address */
+#define PBC_BCTRL2_CLEAR 0x00000A
+
+/* PBC Board control register 3 set address */
+#define PBC_BCTRL3_SET 0x00000C
+
+/* PBC Board control register 3 clear address */
+#define PBC_BCTRL3_CLEAR 0x00000E
+
+/* PBC Board control register 4 set address */
+#define PBC_BCTRL4_SET 0x000010
+
+/* PBC Board control register 4 clear address */
+#define PBC_BCTRL4_CLEAR 0x000012
+
+/* PBC Board status register 1 */
+#define PBC_BSTAT1 0x000014
+
+/* PBC Board interrupt status register */
+#define PBC_INTSTATUS 0x000016
+
+/* PBC Board interrupt current status register */
+#define PBC_INTCURR_STATUS 0x000018
+
+/* PBC Interrupt mask register set address */
+#define PBC_INTMASK_SET 0x00001A
+
+/* PBC Interrupt mask register clear address */
+#define PBC_INTMASK_CLEAR 0x00001C
+
+/* External UART A */
+#define PBC_SC16C652_UARTA 0x010000
+
+/* External UART B */
+#define PBC_SC16C652_UARTB 0x010010
+
+/* Ethernet Controller IO base address */
+#define PBC_CS8900A_IOBASE 0x020000
+
+/* Ethernet Controller Memory base address */
+#define PBC_CS8900A_MEMBASE 0x021000
+
+/* Ethernet Controller DMA base address */
+#define PBC_CS8900A_DMABASE 0x022000
+
+/* External chip select 0 */
+#define PBC_XCS0 0x040000
+
+/* LCD Display enable */
+#define PBC_LCD_EN_B 0x060000
+
+/* Code test debug enable */
+#define PBC_CODE_B 0x070000
+
+/* PSRAM memory select */
+#define PBC_PSRAM_B 0x5000000
+
+#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS)
+#define PBC_INTCURR_STATUS_REG (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
+#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+
+#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4)
+#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5)
+#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6)
+#define EXPIO_INT_RES7 (MXC_EXP_IO_BASE + 7)
+#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8)
+#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9)
+#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11)
+#define EXPIO_INT_SYNTH_IRQ (MXC_EXP_IO_BASE + 12)
+#define EXPIO_INT_CE_INT1 (MXC_EXP_IO_BASE + 13)
+#define EXPIO_INT_CE_INT2 (MXC_EXP_IO_BASE + 14)
+#define EXPIO_INT_RES15 (MXC_EXP_IO_BASE + 15)
+
+#define MXC_MAX_EXP_IO_LINES 16
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
--
1.7.0.4
More information about the linux-arm-kernel
mailing list