ARM target not boot after remap memory

Russell King - ARM Linux linux at arm.linux.org.uk
Mon Sep 13 08:40:49 EDT 2010


On Mon, Sep 13, 2010 at 02:07:51PM +0200, Mike Rapoport wrote:
> (add LAKLM to CC)

>> The problem is now when linux kernel is booting, nothing happens.
>>
>> ---
>> U-Boot> bootm
>> ## Booting kernel from Legacy Image at 21000000 ...
>>    Image Name:   Linux-2.6.34.1robin9200v1.0
>>    Image Type:   ARM Linux Kernel Image (uncompressed)
>>    Data Size:    1811796 Bytes = 1.7 MiB
>>    Load Address: 20008000
>>    Entry Point:  20008000
>>    Verifying Checksum ... OK
>>    Loading Kernel Image ... OK
>> OK
>>
>> Starting kernel ...
>>
>> Uncompressing Linux... done, booting the kernel.
>> ---
>>
>> Here is stalls. With my jtag probe I can locate the problem.
>>
>> ---
>>> halt
>> target state: halted
>> target halted in ARM state due to debug-request, current mode: Supervisor
>> cpsr: 0x600000d3 pc: 0xc000af3c
>> MMU: enabled, D-Cache: enabled, I-Cache: enabled
>>>   arm disassemble 0xc000af3c
>> 0xc000af3c	0xeafffffe	B 0xc000af3c

Probably __error.  Either your machine isn't supported, or the kernel
doesn't recognise your processor.

Is your version of uboot sufficiently recent that it passes the correct
machine ID in r1 ?



More information about the linux-arm-kernel mailing list