[PATCH 03/10] OMAP3: PM: move device-specific special cases from PM core into CPUidle

[Kevin Hilman]

In an effort to simplify the core idle path, move any device-specific
special case handling from the core PM idle path into the CPUidle
pre-idle checking path.

This keeps the core, interrupts-disabled idle path streamlined and
independent of any device-specific handling, and also allows CPUidle
to do the checking only for certain C-states as needed.  This patch
has the device checks in place for all states with the CHECK_BM flag,
namely all states >= C2.

This patch was inspired by a similar patch written by Tero Kristo as
part of a larger series to add INACTIVE state support.

Cc: Tero Kristo <tero.kristo at nokia.com>
Signed-off-by: Kevin Hilman <khilman at deeprootsystems.com>
---
 arch/arm/mach-omap2/cpuidle34xx.c |   50 ++++++++++++++++++++++++++++++++++--
 arch/arm/mach-omap2/pm34xx.c      |   14 +---------
 2 files changed, 48 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 3d3d035..0923b82 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -60,7 +60,8 @@ struct omap3_processor_cx {
 
 struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
 struct omap3_processor_cx current_cx_state;
-struct powerdomain *mpu_pd, *core_pd;
+struct powerdomain *mpu_pd, *core_pd, *per_pd;
+struct powerdomain *cam_pd;
 
 /*
  * The latencies/thresholds for various C states have
@@ -233,14 +234,54 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 			       struct cpuidle_state *state)
 {
 	struct cpuidle_state *new_state = next_valid_state(dev, state);
+	u32 core_next_state, per_next_state = 0, per_saved_state = 0;
+	u32 cam_state;
+	struct omap3_processor_cx *cx;
+	int ret;
 
 	if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
 		BUG_ON(!dev->safe_state);
 		new_state = dev->safe_state;
+		goto select_state;
+	}
+
+	cx = cpuidle_get_statedata(state);
+	core_next_state = cx->core_state;
+
+	/*
+	 * Prevent idle completely if CAM is active.
+	 * CAM does not have wakeup capability in OMAP3.
+	 */
+	cam_state = pwrdm_read_pwrst(cam_pd);
+	if (cam_state == PWRDM_POWER_ON) {
+		new_state = dev->safe_state;
+		goto select_state;
 	}
 
+	/*
+	 * Prevent PER off if CORE is not in retention or off as this
+	 * would disable PER wakeups completely.
+	 */
+	per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
+	if ((per_next_state == PWRDM_POWER_OFF) &&
+	    (core_next_state > PWRDM_POWER_RET)) {
+		per_next_state = PWRDM_POWER_RET;
+		pwrdm_set_next_pwrst(per_pd, per_next_state);
+	}
+
+	/* Are we changing PER target state? */
+	if (per_next_state != per_saved_state)
+		pwrdm_set_next_pwrst(per_pd, per_next_state);
+
+select_state:
 	dev->last_state = new_state;
-	return omap3_enter_idle(dev, new_state);
+	ret = omap3_enter_idle(dev, new_state);
+
+	/* Restore original PER state if it was modified */
+	if (per_next_state != per_saved_state)
+		pwrdm_set_next_pwrst(per_pd, per_saved_state);
+
+	return ret;
 }
 
 DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
@@ -328,7 +369,8 @@ void omap_init_power_states(void)
 			cpuidle_params_table[OMAP3_STATE_C2].threshold;
 	omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON;
-	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID;
+	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
 
 	/* C3 . MPU CSWR + Core inactive */
 	omap3_power_states[OMAP3_STATE_C3].valid =
@@ -426,6 +468,8 @@ int __init omap3_idle_init(void)
 
 	mpu_pd = pwrdm_lookup("mpu_pwrdm");
 	core_pd = pwrdm_lookup("core_pwrdm");
+	per_pd = pwrdm_lookup("per_pwrdm");
+	cam_pd = pwrdm_lookup("cam_pwrdm");
 
 	omap_init_power_states();
 	cpuidle_register_driver(&omap3_idle_driver);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 429268e..bb2ba1e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -346,7 +346,6 @@ void omap_sram_idle(void)
 	int core_next_state = PWRDM_POWER_ON;
 	int core_prev_state, per_prev_state;
 	u32 sdrc_pwr = 0;
-	int per_state_modified = 0;
 
 	if (!_omap_sram_idle)
 		return;
@@ -391,19 +390,10 @@ void omap_sram_idle(void)
 	if (per_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(2);
 		omap2_gpio_prepare_for_idle(per_next_state);
-		if (per_next_state == PWRDM_POWER_OFF) {
-			if (core_next_state == PWRDM_POWER_ON) {
-				per_next_state = PWRDM_POWER_RET;
-				pwrdm_set_next_pwrst(per_pwrdm, per_next_state);
-				per_state_modified = 1;
-			} else
+		if (per_next_state == PWRDM_POWER_OFF)
 				omap3_per_save_context();
-		}
 	}
 
-	if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON)
-		omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]);
-
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(0);
@@ -470,8 +460,6 @@ void omap_sram_idle(void)
 		if (per_prev_state == PWRDM_POWER_OFF)
 			omap3_per_restore_context();
 		omap_uart_resume_idle(2);
-		if (per_state_modified)
-			pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);
 	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
-- 
1.7.2.1