[PATCH 4/6] ARM: S5PC100: Move external interrupt defines

[Marek Szyprowski]

Hello,

On Friday, September 10, 2010 2:00 PM Kukjin Kim wrote:

> Marek Szyprowski wrote:
> >
> > From: Joonyoung Shim <jy0922.shim at samsung.com>
> >
> > This patch moves external interrupt defines from gpio.h to regs-gpio.h
> > for consistency with s5pv210.
> >
> > Signed-off-by: Joonyoung Shim <jy0922.shim at samsung.com>
> > Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> > Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
> > ---
> >  arch/arm/mach-s5pc100/include/mach/gpio.h      |    7 -------
> >  arch/arm/mach-s5pc100/include/mach/regs-gpio.h |    7 +++++++
> >  2 files changed, 7 insertions(+), 7 deletions(-)
> >
> > diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-
> > s5pc100/include/mach/gpio.h
> > index 71ae1f5..29a8a12 100644
> > --- a/arch/arm/mach-s5pc100/include/mach/gpio.h
> > +++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
> > @@ -146,13 +146,6 @@ enum s5p_gpio_number {
> >  /* define the number of gpios we need to the one after the MP04() range
> */
> >  #define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
> >
> > -#define EINT_MODE		S3C_GPIO_SFN(0x2)
> > -
> > -#define EINT_GPIO_0(x)		S5PC100_GPH0(x)
> > -#define EINT_GPIO_1(x)		S5PC100_GPH1(x)
> > -#define EINT_GPIO_2(x)		S5PC100_GPH2(x)
> > -#define EINT_GPIO_3(x)		S5PC100_GPH3(x)
> > -
> >  #include <asm-generic/gpio.h>
> >
> >  #endif /* __ASM_ARCH_GPIO_H */
> > diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
> b/arch/arm/mach-
> > s5pc100/include/mach/regs-gpio.h
> > index dd6295e..6abe481 100644
> > --- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
> > +++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
> > @@ -71,5 +71,12 @@
> >  #define S5P_EXTINT_RISEEDGE		(0x03)
> >  #define S5P_EXTINT_BOTHEDGE		(0x04)
> >
> > +#define EINT_MODE		S3C_GPIO_SFN(0x2)
> > +
> > +#define EINT_GPIO_0(x)		S5PC100_GPH0(x)
> > +#define EINT_GPIO_1(x)		S5PC100_GPH1(x)
> > +#define EINT_GPIO_2(x)		S5PC100_GPH2(x)
> > +#define EINT_GPIO_3(x)		S5PC100_GPH3(x)
> > +
> >  #endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
> >
> > --
> 
> This is ok to me, will apply.
> 
> And will check other regarding gpio interrupt in this weekend ;-)

Is there any progress on gpio interrupts? Over 2 weeks passed since I
posted the patches...

Best regards
--
Marek Szyprowski
Samsung Poland R&D Center