[PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Fri Sep 24 05:11:20 EDT 2010


Hello Grant,

On Fri, Sep 24, 2010 at 01:00:14AM -0600, Grant Likely wrote:
> > Jason Wang (4):
> >      ARM: mx5/clock-mx51: add spi clocks
> >      ARM: mx5/iomux-mx51: add iomux definitions for eCSPI2 on the imx51_3ds board
> >      ARM: mx5/mx51_3ds: add eCSPI2 support on the imx51_3ds board
> >      ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stage
> >
> > Uwe Kleine-König (12):
> >      spi/imx: default to m on platforms that have such devices
> >      spi/imx: convert driver to use platform ids
> >      spi/imx: get rid of more ifs depending on the used cpu
> >      spi/imx: save the spi chip select in config struct, not the gpio to use
> >      spi/imx: add support for imx51's eCSPI and CSPI
> >      ARM: imx: change the way spi-imx devices are registered
> >      ARM: imx: use platform ids for spi_imx devices
> >      ARM: mx51: clean up mx51 header
> >      ARM: mx51: fix naming of spi related defines
> >      ARM: mx5: add spi_imx device registration
> >      ARM: mx5/clock-mx51: refactor ccgr callbacks to use common code
> >      ARM: mx5/clock-mx51: new macro that defines a clk with all members
> >
> >  arch/arm/mach-imx/clock-imx1.c                  |    2 +-
> >  arch/arm/mach-imx/clock-imx21.c                 |    6 +-
> >  arch/arm/mach-imx/clock-imx27.c                 |    6 +-
> >  arch/arm/mach-imx/devices-imx21.h               |    9 +-
> >  arch/arm/mach-imx/devices-imx27.h               |   12 +-
> >  arch/arm/mach-mx25/clock.c                      |    6 +-
> >  arch/arm/mach-mx25/devices-imx25.h              |   12 +-
> >  arch/arm/mach-mx3/clock-imx31.c                 |    6 +-
> >  arch/arm/mach-mx3/clock-imx35.c                 |    4 +-
> >  arch/arm/mach-mx3/devices-imx31.h               |   12 +-
> >  arch/arm/mach-mx3/devices-imx35.h               |    9 +-
> >  arch/arm/mach-mx5/Kconfig                       |    1 +
> >  arch/arm/mach-mx5/board-mx51_3ds.c              |   33 ++
> >  arch/arm/mach-mx5/clock-mx51.c                  |  113 ++++-
> >  arch/arm/mach-mx5/devices-imx51.h               |   18 +
> >  arch/arm/plat-mxc/devices/platform-spi_imx.c    |   89 +++-
> >  arch/arm/plat-mxc/include/mach/devices-common.h |   11 +-
> >  arch/arm/plat-mxc/include/mach/iomux-mx51.h     |    5 +
> >  arch/arm/plat-mxc/include/mach/mx51.h           |  608 +++++++++++------------
> >  drivers/spi/Kconfig                             |   16 +
> >  drivers/spi/spi_imx.c                           |  394 ++++++++++++---
> >  21 files changed, 919 insertions(+), 453 deletions(-)
> >  create mode 100644 arch/arm/mach-mx5/devices-imx51.h
> 
> I'm fine with this series.
> 
> Acked-by: Grant Likely <grant.likely at secretlab.ca>
> 
> What tree do you want to merge them through?
I thought that the five patches touching drivers/spi should go via your
tree, the others via Sascha's.  Assuming this is OK for you, too, do you
prefer to pick the patches out here or should I prepare a branch with
these patches for you to pull?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |



More information about the linux-arm-kernel mailing list