March 2012 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Mar 1 00:12:56 EST 2012
Ending: Sat Mar 31 23:49:19 EDT 2012
Messages: 5034

• [PATCH v5 1/2] mfd: Add anatop mfd driver   Ying-Chun Liu (PaulLiu)
• [PATCH v5 2/2] Regulator: Add Anatop regulator driver   Ying-Chun Liu (PaulLiu)
• [PATCH v4 1/2] mfd: Add anatop mfd driver   Ying-Chun Liu (PaulLiu)
• [PATCH v6 1/2] mfd: Add anatop mfd driver   Ying-Chun Liu (PaulLiu)
• [PATCH v6 2/2] Regulator: Add Anatop regulator driver   Ying-Chun Liu (PaulLiu)
• [PATCH v6 1/2] mfd: Add anatop mfd driver   Ying-Chun Liu (PaulLiu)
• [PATCH v7 1/2] mfd: Add anatop mfd driver   Ying-Chun Liu (PaulLiu)
• [PATCH v8 1/2] mfd: Add anatop mfd driver   Ying-Chun Liu (PaulLiu)
• [PATCH v8 2/2] Regulator: Add Anatop regulator driver   Ying-Chun Liu (PaulLiu)
• [PATCH v9] Regulator: Add Anatop regulator driver   Ying-Chun Liu (PaulLiu)
• [PATCH v10] Regulator: Add Anatop regulator driver   Ying-Chun Liu (PaulLiu)
• [PATCH v11] Regulator: Add Anatop regulator driver   Ying-Chun Liu (PaulLiu)
• [PATCH v10] Regulator: Add Anatop regulator driver   Ying-Chun Liu (PaulLiu)
• [PATCH v12] Regulator: Add Anatop regulator driver   Ying-Chun Liu (PaulLiu)
• [PATCH v13] Regulator: Add Anatop regulator driver   Ying-Chun Liu (PaulLiu)
• [PATCH v9] mfd: Add anatop mfd driver   Ying-Chun Liu (PaulLiu)
• [PATCH v10] mfd: Add anatop mfd driver   Ying-Chun Liu (PaulLiu)
• [PATCH] rtc: add support for Freescale SNVS RTC   Ying-Chun Liu (PaulLiu)
• [PATCH] ARM: dts: imx6q: add anatop regulators   Ying-Chun Liu (PaulLiu)
• [PATCH v13] Regulator: Add Anatop regulator driver   Ying-Chun Liu (PaulLiu)
• [PATCH] Regulator: anatop-regulator: patching to device-tree property "reg".   Ying-Chun Liu (PaulLiu)
• [PATCH] ARM: dts: imx6q: add anatop regulators   Ying-Chun Liu (PaulLiu)
• [PATCH v2] ARM: dts: imx6q: add anatop regulators   Ying-Chun Liu (PaulLiu)
• [PATCH] iomux-mx25.h slew rate adjusted for LCD __LD pins   Sascha Hauer [s.hauer at pengutronix.de] (s.hauer at pengutronix.de)
• [PATCH] iomux-mx25.h slew rate adjusted for LCD __LD pins   Sascha Hauer [s.hauer at pengutronix.de] (s.hauer at pengutronix.de)
• 要成功海量发送EMA1L,关键是要找对工具 linux-arm-kernel   heqiaomai at 21cn.com
• linux-arm-kernel，使用她第一天，网站的访问量就增加了   milamzonne at 21cn.com
• [PATCH] arm: Add unwinding support for memset and memzero.   Laura Abbott
• [PATCH] arm: Add unwinding support for memset and memzero.   Laura Abbott
• [PATCH v2 1/2] ARM: EXYNOS: Add USB HOST register definitions   Thomas Abraham
• [PATCH v3 0/4] ARM: Exynos4: Add irq domain and device tree support for wakeup interrupts   Thomas Abraham
• [PATCH 0/5] pinctrl: add new Samsung pinctrl driver and add Exynos4 support   Thomas Abraham
• [PATCH 1/5] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH 2/5] pinctrl: add exynos4 specific pins, groups, functions and gpio chip data   Thomas Abraham
• [PATCH 3/5] ARM: Exynos4: Add pinctrl devices and pin maps   Thomas Abraham
• [PATCH 4/5] ARM: Exynos: Enable pinctrl driver support for Origen board   Thomas Abraham
• [PATCH 5/5] mmc: sdhci-s3c: setup pins using pinctrl interface   Thomas Abraham
• [PATCH 3/5] ARM: Exynos4: Add pinctrl devices and pin maps   Thomas Abraham
• [PATCH 5/5] mmc: sdhci-s3c: setup pins using pinctrl interface   Thomas Abraham
• [PATCH 5/5] mmc: sdhci-s3c: setup pins using pinctrl interface   Thomas Abraham
• [PATCH 5/5] mmc: sdhci-s3c: setup pins using pinctrl interface   Thomas Abraham
• [PATCH v2 0/3] video: s3c-fb: Rearrange the elements in platform data   Thomas Abraham
• [PATCH v2 1/3] video: s3c-fb: move video interface timing out of window setup data   Thomas Abraham
• [PATCH v2 2/3] video: s3c-fb: remove 'default_win' element from platform data   Thomas Abraham
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Thomas Abraham
• [PATCH v4 0/2] ARM: Exynos: Add irq_domain and device tree support for combiner   Thomas Abraham
• [PATCH v3 0/2] regulator: add irq domain and device tree support for MAX8997   Thomas Abraham
• [PATCH v3 1/2] mfd: add irq domain support for max8997 interrupts   Thomas Abraham
• [PATCH v3 2/2] regulator: add device tree support for max8997   Thomas Abraham
• [PATCH v4 2/2] ARM: Exynos: Add device tree support for interrupt combiner   Thomas Abraham
• [PATCH v3 1/2] mfd: add irq domain support for max8997 interrupts   Thomas Abraham
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Thomas Abraham
• [PATCH 0/5] pinctrl: add new Samsung pinctrl driver and add Exynos4 support   Thomas Abraham
• [PATCH v3 07/12] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Thomas Abraham
• [PATCH v3 0/4] ARM: Exynos4: Add irq domain and device tree support for wakeup interrupts   Thomas Abraham
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Thomas Abraham
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Thomas Abraham
• [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5   Thomas Abraham
• [PATCH v5 0/2] ARM: Exynos: Add irq_domain and device tree support for combiner   Thomas Abraham
• [PATCH v5 1/2] ARM: Exynos: Add irq_domain support for interrupt combiner   Thomas Abraham
• [PATCH v5 2/2] ARM: Exynos: Add device tree support for interrupt combiner   Thomas Abraham
• [PATCH v4 0/4] ARM: Exynos4: Add irq domain and device tree support for wakeup interrupts   Thomas Abraham
• [PATCH v4 1/4] ARM: Exynos: Simplify the wakeup interrupt setup code   Thomas Abraham
• [PATCH v4 2/4] ARM: Exynos: Add irq_domain support for gpio wakeup interrupts   Thomas Abraham
• [PATCH v4 3/4] ARM: Exynos: Remove arch_initcall for wakeup interrupt initialization   Thomas Abraham
• [PATCH v4 4/4] ARM: Exynos: Add device tree support for gpio wakeup interrupt controller   Thomas Abraham
• [PATCH v4 0/2] regulator: add irq domain and device tree support for MAX8997   Thomas Abraham
• [PATCH v4 1/2] mfd: add irq domain support for max8997 interrupts   Thomas Abraham
• [PATCH v4 2/2] regulator: add device tree support for max8997   Thomas Abraham
• [PATCH v3 0/4] video: s3c-fb: Rearrange the elements in platform data   Thomas Abraham
• [PATCH v3 1/4] video: s3c-fb: move video interface timing out of window setup data   Thomas Abraham
• [PATCH v3 2/4] video: s3c-fb: remove 'default_win' element from platform data   Thomas Abraham
• [PATCH v3 3/4] ARM: s3c64xx: Decouple lcd type from display controller window data   Thomas Abraham
• [PATCH v3 4/4] ARM: Samsung: Rework platform data of s3c-fb driver   Thomas Abraham
• [PATCH v3 0/2] Add lcd driver for panels with gpio controlled panel reset   Thomas Abraham
• [PATCH v3 1/2] backlight: lcd: add driver for raster-type lcd's with gpio controlled panel reset   Thomas Abraham
• [PATCH v3 2/2] ARM: Exynos: Use lcd power control driver for lcd panel   Thomas Abraham
• [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5   Thomas Abraham
• [PATCH 0/4] ARM: Exynos: Fixes for Exynos5 device tree support   Thomas Abraham
• [PATCH 1/4] ARM: Exynos: Use CHIP_ID to detect cpu type during decompression setup   Thomas Abraham
• [PATCH 2/4] ARM: Exynos: Remove a new bus_type instance for Exynos5   Thomas Abraham
• [PATCH 3/4] ARM: Exynos5: Fix incorrect initialization of GIC   Thomas Abraham
• [PATCH 4/4] ARM: Exynos5: Add PDMA and MDMA physical base address defines   Thomas Abraham
• [PATCH] ARM: Samsung: Make PM_GENERIC_DOMAINS config depend on CONFIG_PM   Thomas Abraham
• [PATCH] ARM: Samsung: Make PM_GENERIC_DOMAINS config depend on CONFIG_PM   Thomas Abraham
• [PATCH v2 1/3] mmc: atmel-mci: add device tree support   Thomas Abraham
• [PATCH] ARM: Samsung: Make PM_GENERIC_DOMAINS config depend on CONFIG_PM   Thomas Abraham
• [PATCH] ARM: Samsung: Make PM_GENERIC_DOMAINS config depend on CONFIG_PM   Thomas Abraham
• [PATCH v2] video: s3c-fb: Add device tree support   Thomas Abraham
• [PATCH v1 0/5] dt: add basic imx28 support   Dong Aisheng
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support   Dong Aisheng
• [PATCH v1 3/5] ARM: imx28evk: add mmc dt support   Dong Aisheng
• [PATCH v1 4/5] dma: mxs-dma: add dt probe support   Dong Aisheng
• [PATCH v1 5/5] ARM: mxs: add mxs dma dt support   Dong Aisheng
• [PATCH 1/1] net: phylib: add error checking if no phy found   Dong Aisheng
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support   Dong Aisheng
• [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support   Dong Aisheng
• [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support   Dong Aisheng
• [PATCH v1 0/5] dt: add basic imx28 support   Dong Aisheng
• [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support   Dong Aisheng
• [PATCH v1 3/5] ARM: imx28evk: add mmc dt support   Dong Aisheng
• [PATCH v1 4/5] dma: mxs-dma: add dt probe support   Dong Aisheng
• [PATCH v1 5/5] ARM: mxs: add mxs dma dt support   Dong Aisheng
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH 1/1] net: phylib: remove the length limitation of mii bus id   Dong Aisheng
• [PATCH 1/1] net: phylib: remove the length limitation of mii bus id   Dong Aisheng
• [PATCH 1/1] net: phylib: remove the length limitation of mii bus id   Dong Aisheng
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH 1/1] net: phylib: remove the length limitation of mii bus id   Dong Aisheng
• [PATCH 1/1] net: phylib: add error checking if no phy found   Dong Aisheng
• [PATCH v2 1/1] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v2 1/1] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v2 1/1] ARM: imx28: add basic dt support   Dong Aisheng
• [alsa-devel] [PATCH] ASoC: sgtl5000: fix power on/off of MIC bias   Dong Aisheng
• [PATCH 1/1] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v3 1/1] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH v3 1/1] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH 1/1] ASoC: soc-dmaengine-pcm: fix compile error since dma api is changed   Dong Aisheng
• [PATCH v4 1/1] ARM: imx28: add basic dt support   Dong Aisheng
• [PATCH 1/1] net: phylib: remove the length limitation of mii bus id   Dong Aisheng-B29396
• [alsa-devel] [PATCH] ASoC: sgtl5000: fix power on/off of MIC bias   Dong Aisheng-B29396
• [alsa-devel] [PATCH 1/1] ASoC: soc-dmaengine-pcm: fix compile error since dma api is changed   Dong Aisheng-B29396
• [PATCH] regulator: i.MX35-PDK Add regulator support   Alex
• [PATCH] ARM: versatile: fix broken build in pci.c   Oskar Andero
• [PATCH/RFC 2/2] arm/tegra: add timeout to PCIe PLL lock detection loop   Andi
• [PATCH v3] ARM: S3C24XX DMA resume regression fix   Gusakov Andrey
• [PATCH] mm: module_alloc: check if size is 0   H. Peter Anvin
• [PATCH/RFC 0/2] Couple of Tegra2 PCIe fixes(?)   Dmitry Artamonow
• [PATCH/RFC 1/2] arm/tegra: fix harmony pinmux for PCIe   Dmitry Artamonow
• [PATCH/RFC 2/2] arm/tegra: add timeout to PCIe PLL lock detection loop   Dmitry Artamonow
• [PATCH/RFC 2/2] arm/tegra: add timeout to PCIe PLL lock detection loop   Dmitry Artamonow
• [PATCH/RFC 2/2] arm/tegra: add timeout to PCIe PLL lock detection loop   Dmitry Artamonow
• [PATCH v2 2/2] arm/tegra: add timeout to PCIe PLL lock detection loop   Dmitry Artamonow
• [PATCH v2 2/2] arm/tegra: add timeout to PCIe PLL lock detection loop   Dmitry Artamonow
• [PATCH] arm/tegra: pcie: fix return value of function   Dmitry Artamonow
• [PATCH] dma: fix sa11x0-dma build error when CONFIG_PM_SLEEP=n   Dmitry Artamonow
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Darius Augulis
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Darius Augulis
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Darius Augulis
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Darius Augulis
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Darius Augulis
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Darius Augulis
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Darius Augulis
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Darius Augulis
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Darius Augulis
• [PATCH 1/2] ARM: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE   Jonathan Austin
• [PATCH 2/2] ARM: ThumbEE: Use cpuid macros to read ID_PFR0 for ThumbEE   Jonathan Austin
• [PATCH RESEND 1/2] ARM: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE   Jonathan Austin
• [PATCH RESEND 2/2] ARM: ThumbEE: Use cpuid macros to read ID_PFR0 for ThumbEE   Jonathan Austin
• [PATCH] ARM: at91: Add support for configurable main clock frequency.   Boris BREZILLON
• [PATCH] ARM: OMAP: Add support for AM35xx UART4/ttyO3   Stefano Babic
• [PATCH] ARM: OMAP: Add support for AM35xx UART4/ttyO3   Stefano Babic
• Support for Iomega iConnect   Adam Baker
• [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Felipe Balbi
• [PATCH 11/12] mfd: twl4030-irq: Return twl6030_mmc_card_detect IRQ for board setup   Felipe Balbi
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Felipe Balbi
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Felipe Balbi
• [PATCH 1/2] input: keypad: move platform_data to <linux/platform_data>   Felipe Balbi
• [PATCH 2/2] Input: omap-keypad: dynamically handle register offsets   Felipe Balbi
• [PATCH 01/12] mfd: twl-core: don't depend on pdata->irq_base/end   Felipe Balbi
• [RFC][PATCH 1/5] ARM: OMAP2+: gpmc: driver conversion   Felipe Balbi
• [PATCH] ARM: OMAP: fix section mismatches in usb-host.c   Felipe Balbi
• [PATCH v3 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support   Chris Ball
• [PATCH v6 0/2] patch set about the MXS-DMA   Chris Ball
• [PATCH v2 0/6] mmc: omap_hsmmc: Clean up use/abuse of pdev->id   Chris Ball
• [PATCH 4/4] mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect   Chris Ball
• [PATCH V2 1/1] mmc: start removing enable / disable API   Chris Ball
• [PATCH] mmc: omap_hsmmc: Fix Unbalanced pm_runtime_enable warning   Chris Ball
• [PATCH v2 0/6] mmc: omap_hsmmc: Clean up use/abuse of pdev->id   Chris Ball
• [PATCH 1/2] mmc: sdhci-s3c: Use CONFIG_PM_SLEEP to ifdef system suspend   Chris Ball
• [PATCH 2/2] mmc: sdhci-s3c: Enable runtime power management   Chris Ball
• [PATCH 2/2] mmc: sdhci-s3c: Enable runtime power management   Chris Ball
• [PATCH v2 0/4] omap hsmmc device tree support   Chris Ball
• [PATCH v3 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support   Chris Ball
• [PATCH v3 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support   Chris Ball
• [PATCH v2 1/3] mmc: atmel-mci: correct data timeout computation   Chris Ball
• [PATCH 2/3] mmc: atmel-mci: r/w proof capability only available since v2xx   Chris Ball
• [PATCH 3/3] mmc: atmel-mci: add support for odd clock dividers   Chris Ball
• [PATCH 0/4] atmel-mci device tree support   Chris Ball
• Occasional crashes in suspend-resume with MMC transactions   Bedia, Vaibhav
• Occasional crashes in suspend-resume with MMC transactions   Bedia, Vaibhav
• Occasional crashes in suspend-resume with MMC transactions   Bedia, Vaibhav
• Occasional crashes in suspend-resume with MMC transactions   Bedia, Vaibhav
• [PATCH 0/4] ARM: SAMSUNG: Add __init attribute to functions calling s3c_set_platdata   Tushar Behera
• [PATCH 1/4] ARM: EXYNOS: Add __init attribute to nuri_camera_init()   Tushar Behera
• [PATCH 2/4] ARM: EXYNOS: Add __init attribute to universal_camera_init()   Tushar Behera
• [PATCH 3/4] ARM: SAMSUNG: Add __init attribute to samsung_bl_set()   Tushar Behera
• [PATCH 4/4] ARM: SAMSUNG: Add __init attribute to xxx_set_platdata() wrappers   Tushar Behera
• uImage with integrated dtb file   Dirk Behme
• [PATCH 0/7] remoteproc: additional virtio support   Ohad Ben-Cohen
• [PATCH 1/7] remoteproc: resource table overhaul   Ohad Ben-Cohen
• [PATCH 2/7] remoteproc: remoteproc_rpmsg -> remoteproc_virtio   Ohad Ben-Cohen
• [PATCH 3/7] remoteproc: safer boot/shutdown order   Ohad Ben-Cohen
• [PATCH 4/7] remoteproc: remove the single rpmsg vdev limitation   Ohad Ben-Cohen
• [PATCH 5/7] remoteproc/omap: remove the mbox_callback limitation   Ohad Ben-Cohen
• [PATCH 6/7] remoteproc: remove the hardcoded vring alignment   Ohad Ben-Cohen
• [PATCH 7/7] remoteproc: cleanup resource table parsing paths   Ohad Ben-Cohen
• [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp   Ohad Ben-Cohen
• [PATCH] ARM: OMAP: fix iommu, not mailbox   Ohad Ben-Cohen
• [PATCH] ARM: OMAP: don't build hwspinlock in vain   Ohad Ben-Cohen
• [PATCH V2] rpmsg: fix build warning when dma_addr_t is 64-bit   Ohad Ben-Cohen
• remoteproc: Load coprocessor code to the specific main memory location   Ohad Ben-Cohen
• [GIT PULL] fixing and cleaning up rpmsg/remoteproc for 3.4   Ohad Ben-Cohen
• [PATCH 1/7] remoteproc: resource table overhaul   Ohad Ben-Cohen
• [PATCH 1/8] gpio: pxa: add OF support   Arnd Bergmann
• [PATCH 2/8] serial: pxa: add OF support   Arnd Bergmann
• [PATCH 3/8] rtc: sa1100: add OF support   Arnd Bergmann
• [PATCH 1/8] gpio: pxa: add OF support   Arnd Bergmann
• [PATCH 4/8] i2c: pxa: add OF support   Arnd Bergmann
• [PATCH 7/7] Minor compiling fix   Arnd Bergmann
• at91: Error while registering DMA controller in 3.3-rc   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the gpio tree   Arnd Bergmann
• [PATCH v2 19/28] ARM: Add fixed PCI i/o mapping   Arnd Bergmann
• [PATCH 2/4] sizes.h: move from asm-generic to <linux/sizes.h>   Arnd Bergmann
• [GIT PULL] at91: fixes for DMA registration (3.3-rc)   Arnd Bergmann
• [PATCH v2 19/28] ARM: Add fixed PCI i/o mapping   Arnd Bergmann
• [PATCH 3/4] ARM: kirkwood: convert rtc-mv to fdt.   Arnd Bergmann
• [PATCH 4/4] ARM: kirkwood: convert orion-wdt to fdt.   Arnd Bergmann
• [PATCH 0/4] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Arnd Bergmann
• [PATCH 8/8] ARM: tegra: HACK: remove set_irq_flags() from driver   Arnd Bergmann
• [PATCH 0/8] ARM: Tegra: cleanup patches from Arnd Bergmann   Arnd Bergmann
• [PATCH 6/8] ARM: tegra: USB_ULPI needs USB   Arnd Bergmann
• [PATCH 0/4] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Arnd Bergmann
• [PATCH 8/8] ARM: tegra: HACK: remove set_irq_flags() from driver   Arnd Bergmann
• [PATCH 8/8] ARM: tegra: HACK: remove set_irq_flags() from driver   Arnd Bergmann
• [PATCH 6/8] ARM: tegra: USB_ULPI needs USB   Arnd Bergmann
• [PATCH 5/8] ARM: tegra: work around tegra THUMB2_KERNEL bug   Arnd Bergmann
• [PATCH 0/4] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Arnd Bergmann
• [PATCH 3/4] ARM: kirkwood: convert rtc-mv to fdt.   Arnd Bergmann
• [GIT PULL v2] at91: irqdomain and device tree for 3.4   Arnd Bergmann
• [GIT PULL] i.MX visstrim patches   Arnd Bergmann
• [GIT PULL] i.MX27 devicetree support   Arnd Bergmann
• [PATCH 4/4] ARM: kirkwood: convert orion-wdt to fdt.   Arnd Bergmann
• [GIT PULL] i.MX3 patches   Arnd Bergmann
• [PATCH 4/4] ARM: kirkwood: convert orion-wdt to fdt.   Arnd Bergmann
• [PATCH 0/4] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Arnd Bergmann
• [PATCH] Initial Device Tree system for Snowball   Arnd Bergmann
• [PATCH 5/5 v2] ARM: kirkwood: convert orion-wdt to fdt.   Arnd Bergmann
• [PATCH 5/5 v2] ARM: kirkwood: convert orion-wdt to fdt.   Arnd Bergmann
• [PATCH 6/6] ARM: at91: add Shutdown Controller (SHDWC) DT support   Arnd Bergmann
• [PULL REQUEST v2] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Arnd Bergmann
• [PULL REQUEST v2] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Arnd Bergmann
• [PATCH v2 0/6] ARM: Tegra: cleanup patches from Arnd Bergmann   Arnd Bergmann
• [PATCH] Initial Device Tree system for Snowball   Arnd Bergmann
• [PATCH 3/4] ARM: kirkwood: convert rtc-mv to fdt.   Arnd Bergmann
• [PATCH 4/5 v2] ARM: kirkwood: convert rtc-mv to fdt.   Arnd Bergmann
• [PATCH 1/5 v2] ARM: kirkwood: covert orion-spi to fdt.   Arnd Bergmann
• [PATCH v3 07/10] arm/tegra: Add PWFM controller device tree probing   Arnd Bergmann
• [GIT PULL 0/6] Tegra branches for 3.4   Arnd Bergmann
• [PATCH v2 1/7] serial: pxa: add OF support   Arnd Bergmann
• [GIT PULL v3] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Arnd Bergmann
• [PATCH v2 6/7] ARM: dts: append DTS file of pxa168   Arnd Bergmann
• [PATCH v2 5/7] ARM: mmp: append OF support on pxa168   Arnd Bergmann
• [PATCH v2 4/7] ARM: mmp: enable rtc clk in pxa168   Arnd Bergmann
• [PATCH v2 3/7] i2c: pxa: add OF support   Arnd Bergmann
• [PATCH v2 2/7] rtc: sa1100: add OF support   Arnd Bergmann
• [PATCH v2 7/7] Document: devicetree: add OF documents for arch-mmp   Arnd Bergmann
• [GIT PULL 0/6] Tegra branches for 3.4   Arnd Bergmann
• [PATCH v3 02/30] ARM: provide runtime hook for ioremap/iounmap   Arnd Bergmann
• [PULL REQUEST v2] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Arnd Bergmann
• [PATCH] ARM: remove ixp2000 platform   Arnd Bergmann
• [PATCH v3 1/7] serial: pxa: add OF support   Arnd Bergmann
• [PATCH v4] ARM: LPC32xx: Ethernet support   Arnd Bergmann
• [PATCH v3 02/10] pwm: Allow chips to support multiple PWMs.   Arnd Bergmann
• [GIT PULL] ux500 fixes for v3.4, take 3   Arnd Bergmann
• ep93xx: convert vision_ep9307 to MULTI_IRQ_HANDLER   Arnd Bergmann
• revert merge commit de68f28 in for-next?   Arnd Bergmann
• [GIT PULL] arm-soc bug fixes   Arnd Bergmann
• [PATCH v4 1/4] ARM: provide runtime hook for ioremap/iounmap   Arnd Bergmann
• [PATCH] ARM: remove ixp2000 platform   Arnd Bergmann
• Pre-merge-window status of the arm-soc tree   Arnd Bergmann
• [PATCH v5] lpc32xx: Added ethernet driver   Arnd Bergmann
• [PATCH v3 1/6] serial: pxa: add OF support   Arnd Bergmann
• [GIT PULL] fix to use static declarations for samsung stuff   Arnd Bergmann
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Arnd Bergmann
• [PATCH 08/14] ARM: kirkwood: use devicetree for rtc-mv   Arnd Bergmann
• [PATCH 14/14] ARM: kirkwood: use devicetree to init sata_mv   Arnd Bergmann
• [PATCH 6/6] ARM: at91: add Shutdown Controller (SHDWC) DT support   Arnd Bergmann
• [PATCH 14/14] ARM: kirkwood: use devicetree to init sata_mv   Arnd Bergmann
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Arnd Bergmann
• [PATCH 6/6] ARM: at91: add Shutdown Controller (SHDWC) DT support   Arnd Bergmann
• [PATCH 0/3] introduce stmp-style devices   Arnd Bergmann
• [GIT PULL v4] ARM: kirkwood: fdt conversion progress   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Arnd Bergmann
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Arnd Bergmann
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Arnd Bergmann
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Arnd Bergmann
• [PATCH 1/2] ARM: at91: only RM9200 has ISA-style PIO   Arnd Bergmann
• [PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Arnd Bergmann
• [PATCH 2/2] ARM: kirkwood: Convert orion-nand to fdt   Arnd Bergmann
• [PATCH 3/4] ARM: create a common IOMEM definition   Arnd Bergmann
• [PATCH 4/4] ARM: __io abuse cleanup   Arnd Bergmann
• [PATCH v2 1/2] ARM: AT91: Add parameter for AT91_HAS_PATA   Arnd Bergmann
• [PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Arnd Bergmann
• [PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Arnd Bergmann
• [PATCH v7 1/4] USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp   Arnd Bergmann
• [PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Arnd Bergmann
• [PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Arnd Bergmann
• [PATCH 3/4] ARM: create a common IOMEM definition   Arnd Bergmann
• [PATCH v4 04/11] ep93xx: Use ioremap for backlight driver   Arnd Bergmann
• [PATCH 3/7 v2] ARM: orion: wdt: use resource vice direct access   Arnd Bergmann
• [PATCH 6/7] ARM: kirkwood: rtc-mv devicetree bindings   Arnd Bergmann
• [PATCH 7/7] ARM: kirkwood: use devicetree for rtc-mv   Arnd Bergmann
• [PATCH 4/7 v4] ARM: kirkwood: add dreamplug (fdt) support.   Arnd Bergmann
• Conflict between Versatile Express DT conversion and local timer updates   Arnd Bergmann
• [PATCH v4 02/11] ep93xx: Don't use system controller defines in audio drivers   Arnd Bergmann
• [PATCH v4 05/11] ep93xx: Convert the watchdog driver into a platform device.   Arnd Bergmann
• [PATCH v4 06/11] ep93xx: Move peripheral defines to local SoC header   Arnd Bergmann
• [PATCH v4 00/11] ep93xx: Move SoC private bits to core   Arnd Bergmann
• [PATCH v8 0/4] USB: OHCI-HCD: Support for LPC32xx   Arnd Bergmann
• [PATCH 7/7] ARM: kirkwood: use devicetree for rtc-mv   Arnd Bergmann
• Conflict between Versatile Express DT conversion and local timer updates   Arnd Bergmann
• [PATCH v3 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5   Arnd Bergmann
• [PATCH v3 09/12] ARM: EXYNOS: add support get_core_count() for EXYNOS5250   Arnd Bergmann
• [PATCH v3 00/12] ARM: EXYNOS: add support new EXYNOS5250   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH v3] of: introduce helper to manage boolean   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH] stmmac: Add device-tree support   Arnd Bergmann
• [PATCH v3 2/5] ARM: Add a printk loglevel modifier   Arnd Bergmann
• [PATCH v3 0/5] ARM: Initial support for Cortex-M3   Arnd Bergmann
• Inconsistent kallsyms data on ARM.   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH v4 00/11] ep93xx: Move SoC private bits to core   Arnd Bergmann
• [PATCH 02/10] ARM: ux500: Initial Device Tree support for Snowball   Arnd Bergmann
• [PATCH 05/10] ARM: ux500: db8500: list most devices in the snowball device tree   Arnd Bergmann
• [PATCH 06/10] ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree   Arnd Bergmann
• [PATCH 07/10] ARM: ux500: Provide local timer support for Device Tree   Arnd Bergmann
• [PATCH 08/10] ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree   Arnd Bergmann
• [PATCH 09/10] ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree   Arnd Bergmann
• [PATCH 10/10] ARM: ux500: Enable PL022 SSP Controller in Device Tree   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH 02/10] ARM: ux500: Initial Device Tree support for Snowball   Arnd Bergmann
• [PATCH v2] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [GIT PULL 1/7] non-critical fixes part3 for upcoming merge window   Arnd Bergmann
• [PATCH v4 00/11] ep93xx: Move SoC private bits to core   Arnd Bergmann
• [PATCH v3 2/5] ARM: Add a printk loglevel modifier   Arnd Bergmann
• [GIT PULL] ARM: OMAP: i2c, gpio, spi, regulator and mmc DTS updates   Arnd Bergmann
• [PATCH v4 03/10] pwm: Add device tree support   Arnd Bergmann
• [PATCH v4 10/10] pwm-backlight: Add rudimentary device tree support   Arnd Bergmann
• [PATCH v9] mfd: Add anatop mfd driver   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH v3] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH v4 03/10] pwm: Add device tree support   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH -next] ARM: ux500: fix compilation after local timer rework   Arnd Bergmann
• [GIT PULL] i.MX25 iomux fix   Arnd Bergmann
• [GIT PULL] LPC32xx: Ethernet support   Arnd Bergmann
• [GIT PULL] ep93xx for v3.4   Arnd Bergmann
• [PATCH 0/5] MMC: mmci: Provide bindings for Device Tree   Arnd Bergmann
• [GIT PULL] DaVinci fixes for v3.3   Arnd Bergmann
• [PATCH v9] mfd: Add anatop mfd driver   Arnd Bergmann
• [GIT PULL][for v3.4] pull request from board-specific branch in arch-pxa   Arnd Bergmann
• [GIT PULL][for v3.4] pull request from board-specific branch in arch-pxa   Arnd Bergmann
• [GIT PULL][for 3.4] pull request from fixes-non-critical branch in arch-pxa git   Arnd Bergmann
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Arnd Bergmann
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Arnd Bergmann
• [PATCH 2/5] MMC: mmci: Seperate ARM variants from generic code   Arnd Bergmann
• [PATCH 5/5] MMC: mmci: Add required documentation for Device Tree bindings   Arnd Bergmann
• [PATCH 5/5] MMC: mmci: Add required documentation for Device Tree bindings   Arnd Bergmann
• [PATCH 2/5] MMC: mmci: Seperate ARM variants from generic code   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with Linus' tree   Arnd Bergmann
• [GIT PULL v2] DaVinci DM644x video display support   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [GIT PULL] Samsung EXYNOS5250 GPIO for v3.4   Arnd Bergmann
• [PATCH 0/5] MMC: mmci: Provide bindings for Device Tree   Arnd Bergmann
• [PATCH v10] mfd: Add anatop mfd driver   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the s5p tree   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the arm tree   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH v4] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH v4] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH v7 1/3] Documentation: common clk API   Arnd Bergmann
• [PATCH 0/5] MMC: mmci: Provide bindings for Device Tree   Arnd Bergmann
• [PATCH 2/5] MMC: mmci: Seperate ARM variants from generic code   Arnd Bergmann
• [GIT PULL] Samsung SoC EXYNOS5250 arch for v3.4   Arnd Bergmann
• [PATCH v4] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PULL 01/02 v2] AT91 DT2 pull request   Arnd Bergmann
• [GIT PULL] [for v3.4] Pull request containing ux500 DT enablement   Arnd Bergmann
• [PATCH 0/9 v5] ARM: kirkwood: fdt: convert kirkwood to fdt   Arnd Bergmann
• [PATCH v5] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH 0/9 v5] ARM: kirkwood: fdt: convert kirkwood to fdt   Arnd Bergmann
• [PATCH v7 1/3] Documentation: common clk API   Arnd Bergmann
• [PATCH v7 1/3] Documentation: common clk API   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH v7 1/3] Documentation: common clk API   Arnd Bergmann
• [PATCH v7 1/3] Documentation: common clk API   Arnd Bergmann
• [PATCH] drivers/base: fix compiler warning in SoC export driver - idr should be ida   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• ARM: fix build failure on ux500 in linux-next   Arnd Bergmann
• linux-next: build warning after merge of the arm-soc tree   Arnd Bergmann
• [RFC/PATCH 4/4] pxa: convert to common clock framework   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH 8/8] ARM i.MX27: implement clocks using common clock framework   Arnd Bergmann
• [PATCH] ARM: tegra: update main repo and add patchwork   Arnd Bergmann
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance   Arnd Bergmann
• [PATCH] USB: gadget driver for LPC32xx   Arnd Bergmann
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance   Arnd Bergmann
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance   Arnd Bergmann
• [PATCH] USB: gadget driver for LPC32xx   Arnd Bergmann
• [PATCH v2 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] USB: gadget driver for LPC32xx   Arnd Bergmann
• [PATCH v8 0/8] Consolidate cpuidle functionality   Arnd Bergmann
• [PATCH v8 0/8] Consolidate cpuidle functionality   Arnd Bergmann
• [PATCH v7 1/3] Documentation: common clk API   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [GIT PULL] USB AUXDATA fix for tegra   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH] USB: gadget driver for LPC32xx   Arnd Bergmann
• [PATCH] SPEAr: Use CLKDEV_INIT for defining clk_lookups   Arnd Bergmann
• [PATCH] SPEAr: Use CLKDEV_INIT for defining clk_lookups   Arnd Bergmann
• ioremap to a specific virtual address   Arnd Bergmann
• AMP IPC   Arnd Bergmann
• ioremap to a specific virtual address   Arnd Bergmann
• ioremap to a specific virtual address   Arnd Bergmann
• [PATCH 7/9] omap2plus: ensure that one of omap2/3/4 is selected   Arnd Bergmann
• ioremap to a specific virtual address   Arnd Bergmann
• [PATCH V2 2/3] ARM: kirkwood: Convert orion-nand to fdt   Arnd Bergmann
• [PATCH V2 3/3] ARM: kirkwood: Define NAND partitions in dts   Arnd Bergmann
• [PATCH V2 1/3] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Arnd Bergmann
• [GIT PULL 0/9] arm-soc updates, first batch   Arnd Bergmann
• [PATCH V3 2/3] ARM: kirkwood: Convert orion-nand to fdt   Arnd Bergmann
• [GIT PULL 02/09] ARM: global cleanups   Arnd Bergmann
• [GIT PULL 0/9] arm-soc updates, first batch   Arnd Bergmann
• ioremap to a specific virtual address   Arnd Bergmann
• Inconsistent kallsyms data on ARM.   Arnd Bergmann
• ioremap to a specific virtual address   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH v3 6/6] mmc: sdhci-s3c: Add device tree support   Arnd Bergmann
• [PATCH v3 6/6] mmc: sdhci-s3c: Add device tree support   Arnd Bergmann
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Arnd Bergmann
• [PATCH V3 5/5] mtd: Move fdt partition documentation to a seperate file   Arnd Bergmann
• [PATCH V3 1/5] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Arnd Bergmann
• [PATCH V2 5/7] ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture   Arnd Bergmann
• [GIT PULL 1/5] ARM: cleanups of io includes   Arnd Bergmann
• [PATCH v5 05/16] pwm: Add device tree support   Arnd Bergmann
• [GIT PULL 0/5] Second batch of arm-soc changes   Arnd Bergmann
• [GIT PULL 4/5] ARM: More device tree support updates   Arnd Bergmann
• [PATCH V2 5/7] ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture   Arnd Bergmann
• [PATCH] ARM: ux500: fix compile error in new timer code   Arnd Bergmann
• [PATCH] drivers/base: fix compiler warning in SoC export driver - idr should be ida   Arnd Bergmann
• [PATCH v3 6/6] mmc: sdhci-s3c: Add device tree support   Arnd Bergmann
• [PATCH v3 6/6] mmc: sdhci-s3c: Add device tree support   Arnd Bergmann
• [PATCH 1/3] PATA host controller driver for ep93xx   Arnd Bergmann
• RFC: Stack overrun detector on ARM - ideas?   Tim Bird
• [PATCH] mtd/gpmi : fix the wrong DMA command.   Bityutskiy, Artem
• [GIT PULL] One more sched_clock() patch   Stephen Boyd
• [PATCH] ARM: Kconfig: Remove duplicate IRQ Kconfig entries   Stephen Boyd
• [PATCH v6 2/5] Extcon: support generic GPIO extcon driver   Stephen Boyd
• [PATCH 1/3] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Josh Boyer
• [GIT PULL] merge PL330 DMAC driver   Jassi Brar
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Jassi Brar
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Jassi Brar
• [PATCH] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH v4 3/4] ARM: msm: use runtime ioremap hook   David Brown
• [PATCH] MAINTAINERS: new git entry for arm/mach-msm   David Brown
• [PATCH v3 2/2] DMAEngine: Add DMAEngine driver based on old MSM DMA APIs   David Brown
• [PATCH] arm: Add unwinding support for memset and memzero.   David Brown
• [PATCH 3/4] ARM: create a common IOMEM definition   David Brown
• [PATCH v3 2/2] DMAEngine: Add DMAEngine driver based on old MSM DMA APIs   David Brown
• [PATCH 03/17] ARM: mark const init data with __initconst instead of __initdata   David Brown
• [PATCH v8 0/8] Consolidate cpuidle functionality   Len Brown
• [PATCH] ARM: davinci: Fix for cpuidle consolidation changes   Len Brown
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Mark Brown
• [PATCH v5 2/2] Regulator: Add Anatop regulator driver   Mark Brown
• [PATCH v5 1/2] mfd: Add anatop mfd driver   Mark Brown
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Mark Brown
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Mark Brown
• [PATCH 1/4] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Mark Brown
• [PATCH 1/2] mmc: sdhci-s3c: Use CONFIG_PM_SLEEP to ifdef system suspend   Mark Brown
• [PATCH 2/2] mmc: sdhci-s3c: Enable runtime power management   Mark Brown
• [PATCH 1/4] regulator fixed: Do not report enumaratable voltages if there are none   Mark Brown
• [PATCH 2/4] regulator: provide a helper for registering a fixed regulator   Mark Brown
• [PATCH 3/4] ARM i.MX pcm037: register a dummy regulator for the smsc911x device   Mark Brown
• [PATCH 4/4] ARM i.MX 3ds debugboard: register a dummy regulator for the smsc911x device   Mark Brown
• [PATCH v7 1/2] mfd: Add anatop mfd driver   Mark Brown
• [PATCH 08/20] ASoC: imx: initialize dma_params burstsize just in imx-ssi   Mark Brown
• [PATCH v6 2/2] Regulator: Add Anatop regulator driver   Mark Brown
• [PATCH 00/20] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Mark Brown
• [PATCH 07/20] ASoC: imx: move SND_SOC_AC97_BUS selection down to machine driver   Mark Brown
• [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Mark Brown
• [PATCH 19/20] ASoC: rename sgtl5000 device tree binding document   Mark Brown
• [PATCH 09/20] ASoC: imx: separate imx-pcm bits from imx-ssi driver   Mark Brown
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Mark Brown
• [PATCH 2/2] mmc: sdhci-s3c: Enable runtime power management   Mark Brown
• [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Mark Brown
• [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Mark Brown
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Mark Brown
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Mark Brown
• [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver   Mark Brown
• [PATCH v2 11/17] ASoC: fsl: create fsl_utils to accommodate the common functions   Mark Brown
• [PATCH v2 11/17] ASoC: fsl: create fsl_utils to accommodate the common functions   Mark Brown
• [alsa-devel] [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Mark Brown
• [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Mark Brown
• [PATCH v2 01/17] ASoC: imx: move eukrea audmux call into ASoC machine driver   Mark Brown
• [PATCH v2 01/17] ASoC: imx: move eukrea audmux call into ASoC machine driver   Mark Brown
• [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver   Mark Brown
• [PATCH] ARM: S3C64XX: Add some more Cragganmore module IDs to the table   Mark Brown
• [PATCH v2 01/17] ASoC: imx: move eukrea audmux call into ASoC machine driver   Mark Brown
• [GIT PULL][v3.4] pull request on arch-pxa for regulator branch   Mark Brown
• [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver   Mark Brown
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Mark Brown
• [PATCH 2/2] regulator: Remove bq24022 regulator driver   Mark Brown
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Mark Brown
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Mark Brown
• [PATCH v2 16/17] ASoC: fsl: add dt support for imx-audmux   Mark Brown
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Mark Brown
• [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver   Mark Brown
• [alsa-devel] [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Mark Brown
• [alsa-devel] [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Mark Brown
• [PATCH] ARM: pxa: fix regulator related build fail in magician_defconfig   Mark Brown
• [alsa-devel] [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Mark Brown
• [PATCH v9] Regulator: Add Anatop regulator driver   Mark Brown
• [PATCH v2] ARM: pxa: fix regulator related build fail in magician_defconfig   Mark Brown
• [PATCH v9] Regulator: Add Anatop regulator driver   Mark Brown
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Mark Brown
• [PATCH v2 2/3] ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header   Mark Brown
• [PATCH v2 3/3] ASoC: omap-mcbsp: Single function CLKR/FSR source mux configuration   Mark Brown
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Mark Brown
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Mark Brown
• [PATCH 05/11] tps6586x: Add device-tree support   Mark Brown
• [PATCH 05/11] tps6586x: Add device-tree support   Mark Brown
• [PATCH v3 01/11] ASoC: core: missing set_fmt should not be complaint   Mark Brown
• [PATCH 04/11] regulator: tps6586x: fix typo in debug message   Mark Brown
• [GIT PULL] ARM: OMAP2+: PM: core support for SMPS regulators for v3.4   Mark Brown
• [PATCH v3 07/11] ASoC: fsl: check property 'compatible' for the machine name   Mark Brown
• [PATCH v3 08/11] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Mark Brown
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Mark Brown
• [PATCH v3 00/11] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Mark Brown
• [PATCH v3 00/11] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Mark Brown
• linux-next: manual merge of the arm-soc tree with the regulator tree   Mark Brown
• [PATCH 2/2] mmc: sdhci-s3c: Enable runtime power management   Mark Brown
• [PATCH v10] Regulator: Add Anatop regulator driver   Mark Brown
• [PATCH v11] Regulator: Add Anatop regulator driver   Mark Brown
• [PATCH v6 1/5] Extcon (external connector): import Android's switch class and modify.   Mark Brown
• [PATCH 2/2] ASoC: OMAP: Build config cleanup for McBSP   Mark Brown
• [PATCH 1/4] add a mc13783 codec driver   Mark Brown
• [PATCH 2/4] Add imx3sound sound support.   Mark Brown
• [PATCH 3/4] mx31moboard: Add ssi configuration   Mark Brown
• [PATCH 03/11] regulator: fixed: Support driver probe deferral   Mark Brown
• [GIT PULL] ARM: OMAP2+: PM: core support for SMPS regulators for v3.4   Mark Brown
• [PATCH v12] Regulator: Add Anatop regulator driver   Mark Brown
• [PATCH 1/4] add a mc13783 codec driver   Mark Brown
• [PATCH 11/11] ARM: tegra: pcie: Add device tree support   Mark Brown
• mfd: mc13xxx: add I2C support, V2   Mark Brown
• [PATCH 5/5] mmc: sdhci-s3c: setup pins using pinctrl interface   Mark Brown
• [PATCH 11/11] ARM: tegra: pcie: Add device tree support   Mark Brown
• [PATCH 11/11] ARM: tegra: pcie: Add device tree support   Mark Brown
• [PATCH 5/5] mmc: sdhci-s3c: setup pins using pinctrl interface   Mark Brown
• [GIT PULL] ARM: OMAP2+: PM: core support for SMPS regulators for v3.4   Mark Brown
• [PATCH v4 06/10] ASoC: fsl: check property 'compatible' for the machine name   Mark Brown
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Mark Brown
• [PATCH v4 02/11] ep93xx: Don't use system controller defines in audio drivers   Mark Brown
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Mark Brown
• [PATCH] ARM: pxa: fix regulator related build fail in magician_defconfig   Mark Brown
• linux-next: manual merge of the arm-soc tree with the sound-asoc tree   Mark Brown
• [PATCH v13] Regulator: Add Anatop regulator driver   Mark Brown
• [alsa-devel] [PATCH v4] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Mark Brown
• [PATCH v4 03/10] pwm: Add device tree support   Mark Brown
• [PATCH v3 1/6] regmap: add support for 7_25 format   Mark Brown
• [PATCH v3 2/6] regmap: Add support for device with 24 data bits.   Mark Brown
• [PATCH v9] mfd: Add anatop mfd driver   Mark Brown
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Mark Brown
• [alsa-devel] [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Mark Brown
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Mark Brown
• [PATCH v3 4/6] mfd: mc13xxx-core: use regmap for register access   Mark Brown
• [PATCH v10] mfd: Add anatop mfd driver   Mark Brown
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Mark Brown
• [alsa-devel] [PATCH v5 8/8] ASoC: fsl: add imx-sgtl5000 machine driver   Mark Brown
• [PATCH 0/5] MMC: mmci: Provide bindings for Device Tree   Mark Brown
• [PATCH 2/5] MMC: mmci: Seperate ARM variants from generic code   Mark Brown
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Mark Brown
• [PATCH v4 2/4] mfd: mc13xxx-core: use regmap for register access   Mark Brown
• [PATCH] of: Add generic device tree DMA helpers   Mark Brown
• [PATCH v5 1/8] ASoC: fsl: separate SSI and DMA Kconfig options   Mark Brown
• [PATCH v4 10/10] pwm-backlight: Add rudimentary device tree support   Mark Brown
• [PATCH v7 1/3] Documentation: common clk API   Mark Brown
• [PATCH] clk: Constify parent name arrays   Mark Brown
• [PATCH] clk: Constify parent name arrays   Mark Brown
• [PATCH v7 1/3] Documentation: common clk API   Mark Brown
• [PATCH 1/4] clk: fixed-rate: Don't open code kstrdup()   Mark Brown
• [PATCH 2/4] clk: Constify parent name arrays   Mark Brown
• [PATCH 3/4] clk: Provide dummy clk_unregister()   Mark Brown
• [PATCH 4/4] clk: wm831x: Add initial WM831x clock driver   Mark Brown
• [PATCH v7 1/3] Documentation: common clk API   Mark Brown
• [PATCH 4/4] clk: wm831x: Add initial WM831x clock driver   Mark Brown
• [PATCH] clk: wm831x: Add initial WM831x clock driver   Mark Brown
• [PATCH 4/4] clk: wm831x: Add initial WM831x clock driver   Mark Brown
• [PATCH 4/4] clk: wm831x: Add initial WM831x clock driver   Mark Brown
• [PATCH v1] regulator: i.MX35-PDK Add regulator support   Mark Brown
• [PATCH] regmap: Add 24 bits support   Mark Brown
• [PATCH v1] regulator: i.MX35-PDK Add regulator support   Mark Brown
• [GIT PULL] pxa io.h clean-up fixes   Mark Brown
• [PATCH v3 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support   Mark Brown
• [V2 2/4] rtc: fix 88pm860x rtc irq enable callback   Mark Brown
• [PATCH 07/10] clk: Constify parent name arrays   Mark Brown
• [PATCH] ARM: pxa: fix regulator related build fail in magician_defconfig   Mark Brown
• [PATCH] ARM: Samsung: Make PM_GENERIC_DOMAINS config depend on CONFIG_PM   Mark Brown
• [PATCH] Regulator: anatop-regulator: patching to device-tree property "reg".   Mark Brown
• [PATCH 4/4] ARM i.MX 3ds debugboard: register a dummy regulator for the smsc911x device   Mark Brown
• [PATCH] ASoC: fsl: assign dma peripheral type according to bus topology   Mark Brown
• [PATCH] ARM: Samsung: Make PM_GENERIC_DOMAINS config depend on CONFIG_PM   Mark Brown
• [PATCH] ARM: Samsung: Make PM_GENERIC_DOMAINS config depend on CONFIG_PM   Mark Brown
• [alsa-devel] [PATCH] ASoC: sgtl5000: fix power on/off of MIC bias   Mark Brown
• [PATCH] mfd: mc13xxx: add I2C support fix building for v3.4   Mark Brown
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Mark Brown
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Mark Brown
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Mark Brown
• [PATCH] mfd: mc13xxx: add I2C support fix building for v3.4   Mark Brown
• [PATCH] ARM: pxa: fix regulator related build fail in magician_defconfig   Mark Brown
• [PATCH] ASoC: fsl: enable ssi clock in probe function   Mark Brown
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Mark Brown
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Mark Brown
• [PATCH] ASoC: fsl: enable ssi clock in probe function   Mark Brown
• [PATCH] ASoC: fsl: enable ssi clock in probe function   Mark Brown
• [PATCH v5 01/16] pwm: Add PWM framework support   Mark Brown
• [PATCH v5 05/16] pwm: Add device tree support   Mark Brown
• [PATCH v5 02/16] pwm: Allow chips to support multiple PWMs   Mark Brown
• [PATCH v5 03/16] pwm: Add debugfs interface   Mark Brown
• [PATCH v5 04/16] pwm: Add table-based lookup for static mappings   Mark Brown
• [PATCH] ARM: S3C64XX: Add basic cpuidle driver   Mark Brown
• [PATCH v6 1/5] Extcon (external connector): import Android's switch class and modify.   Mark Brown
• [PATCH v6 1/5] Extcon (external connector): import Android's switch class and modify.   Mark Brown
• [PATCH v5 04/16] pwm: Add table-based lookup for static mappings   Mark Brown
• [PATCH v6 1/5] Extcon (external connector): import Android's switch class and modify.   Mark Brown
• [PATCH 2/2] regulator: rename function regulator_register_fixed   Mark Brown
• [PATCH 1/2] regulator: fix sysfs name collision between dummy and fixed dummy regulator   Mark Brown
• [PATCH] ARM: amba: adapt to regulator probe deferral change   Mark Brown
• [PATCH 2/2] regulator: rename function regulator_register_fixed   Mark Brown
• [PATCH] ARM: ux300: Fix unimplementable regulation constraints   Mark Brown
• [PATCH] ARM: amba: adapt to regulator probe deferral change   Mark Brown
• [PATCH 1/1] ARM iMX28: incorrect frac/div calculation   Matt Burtch
• [PATCH 1/1] ARM iMX28: incorrect frac/div calculation   Matt Burtch
• [PATCH 1/1] ARM iMX28: incorrect frac/div calculation   Matt Burtch
• [RFC PATCH] slimbus message encoding/decoding   Marc Butler
• [RFC PATCH] slimbus message encoding/decoding   Marc Butler
• [PATCH v6 1/2] mfd: Add anatop mfd driver   Venu Byravarasu
• [PATCH v6 1/2] mfd: Add anatop mfd driver   Venu Byravarasu
• [MX25][MMC] mmc esdhc failure in 3.3   Eric Bénard
• [MX25][MMC] mmc esdhc failure in 3.3   Eric Bénard
• [MX25][MMC] mmc esdhc failure in 3.3   Eric Bénard
• [MX25][MMC] mmc esdhc failure in 3.3   Eric Bénard
• [MX25][MMC] mmc esdhc failure in 3.3   Eric Bénard
• [PATCH] stmmac: Add device-tree support   Giuseppe CAVALLARO
• [PATCH] stmmac: Add device-tree support   Giuseppe CAVALLARO
• [PATCH] stmmac: Add device-tree support   Giuseppe CAVALLARO
• [PATCH] stmmac: Add device-tree support   Giuseppe CAVALLARO
• [PATCH] stmmac: Add device-tree support   Giuseppe CAVALLARO
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Julian Calaby
• Status of gpio-pxa driver and dummy clock   Jonathan Cameron
• [PATCH 1/2] omap3: nand: Make board_onenand_init() visible to board code   Javier Martinez Canillas
• [PATCH 2/2] OMAP3: igep0020: Add support for Micron NAND Flash storage memory   Javier Martinez Canillas
• [PATCH v2 2/2] OMAP3: igep0020: Add support for Micron NAND Flash storage memory   Javier Martinez Canillas
• [PATCH RESEND 1/2] omap3: nand: Make board_onenand_init() visible to board code   Javier Martinez Canillas
• [PATCH RESEND 2/2] OMAP3: igep0020: Add support for Micron NAND Flash storage memory   Javier Martinez Canillas
• [PATCH v1] i.MX35-PDK: Add Camera support   Mauro Carvalho Chehab
• [PATCH v1] i.MX35-PDK: Add Camera support   Mauro Carvalho Chehab
• [PATCH v1] i.MX35-PDK: Add Camera support   Mauro Carvalho Chehab
• [PATCH v9 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   KyongHo Cho
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   KyongHo Cho
• [PATCH v10 0/3] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   KyongHo Cho
• [PATCH v10 1/3] S5P: SYSMMU: Remove System MMU device driver   KyongHo Cho
• [PATCH v10 2/3] ARM: EXYNOS: Change System MMU platform device definitions   KyongHo Cho
• [PATCH v10 3/3] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH v10 2/3] ARM: EXYNOS: Change System MMU platform device definitions   KyongHo Cho
• [PATCH v10 3/3] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH v10 3/3] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH v11 3/3] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH v11 3/3] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   KyongHo Cho
• [PATCH v12 3/3] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH v12 2/3] ARM: EXYNOS: Change System MMU platform device definitions   KyongHo Cho
• [PATCH V2 1/1] mmc: start removing enable / disable API   Jaehoon Chung
• [PATCH 1/2] mmc: sdhci-s3c: Use CONFIG_PM_SLEEP to ifdef system suspend   Jaehoon Chung
• [PATCH 2/2] mmc: sdhci-s3c: Enable runtime power management   Jaehoon Chung
• [PATCH] ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci   Jaehoon Chung
• [PATCH 2/2] mmc: sdhci-s3c: Enable runtime power management   Jaehoon Chung
• [RFC PATCH] video:backlight: add dimming sysfs node   Lars-Peter Clausen
• [PATCH v3 2/2] DMAEngine: Add DMAEngine driver based on old MSM DMA APIs   Lars-Peter Clausen
• [PATCH v4 01/10] PWM: add pwm framework support   Lars-Peter Clausen
• [PATCH v4 2/2] DMAEngine: Add DMAEngine driver based on old MSM ADM DMA APIs   Lars-Peter Clausen
• [alsa-devel] [PATCH 1/1] ASoC: soc-dmaengine-pcm: fix compile error since dma api is changed   Lars-Peter Clausen
• [PATCH 2/5] arm: Use the plat_nand default partition parser   Alexander Clouter
• [PATCH] ARM: remove ixp2000 platform   Richard Cochran
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Coelho, Luciano
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Luciano Coelho
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Luciano Coelho
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Luciano Coelho
• [PATCH v2] ARM: OMAP: WiLink platform data for the PandaBoard   Luciano Coelho
• [PATCH 1/1] arm: fault.c: correct how the tsk->[maj|min]_flt gets incremented   Kautuk Consul
• [PATCH 1/1] arm: fault.c: correct how the tsk->[maj|min]_flt gets incremented   Kautuk Consul
• [PATCH 0/4] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason Cooper
• [PATCH 1/4] ARM: kirkwood: move var setting to correct location.   Jason Cooper
• [PATCH 2/4] ARM: kirkwood: fdt: absorb kirkwood_init()   Jason Cooper
• [PATCH 3/4] ARM: kirkwood: convert rtc-mv to fdt.   Jason Cooper
• [PATCH 4/4] ARM: kirkwood: convert orion-wdt to fdt.   Jason Cooper
• [PATCH 0/5 v2] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason Cooper
• [PATCH 1/5 v2] ARM: kirkwood: covert orion-spi to fdt.   Jason Cooper
• [PATCH 2/5] ARM: kirkwood: move var setting to correct location.   Jason Cooper
• [PATCH 3/5 v2] ARM: kirkwood: fdt: absorb kirkwood_init()   Jason Cooper
• [PATCH 4/5 v2] ARM: kirkwood: convert rtc-mv to fdt.   Jason Cooper
• [PATCH 5/5 v2] ARM: kirkwood: convert orion-wdt to fdt.   Jason Cooper
• [GIT PULL v3] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason Cooper
• [PATCH 0/14 v3] ARM: kirkwood: fdt: convert kirkwood to fdt   Jason Cooper
• [PATCH 01/14] ARM: orion: spi: remove enable_clock_fix which is not used   Jason Cooper
• [PATCH 02/14] ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data.   Jason Cooper
• [PATCH 03/14] ARM: kirkwood: add dreamplug (fdt) support.   Jason Cooper
• [PATCH 04/14] ARM: kirkwood: fdt: absorb kirkwood_init()   Jason Cooper
• [PATCH 05/14] ARM: kirkwood: add interrupt controller to devicetree.   Jason Cooper
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Jason Cooper
• [PATCH 07/14] ARM: kirkwood: rtc-mv devicetree bindings   Jason Cooper
• [PATCH 08/14] ARM: kirkwood: use devicetree for rtc-mv   Jason Cooper
• [PATCH 09/14] ARM: kirkwood: mv_cesa devicetree bindings   Jason Cooper
• [PATCH 10/14] ARM: kirkwood: mv_cesa devicetree support.   Jason Cooper
• [PATCH 11/14] ARM: kirkwood: ehci-orion: add device tree binding   Jason Cooper
• [PATCH 12/14] ARM: kirkwood: use devicetree for orion-ehci   Jason Cooper
• [PATCH 13/14] ARM: kirkwood: sata_mv: add device tree binding   Jason Cooper
• [PATCH 14/14] ARM: kirkwood: use devicetree to init sata_mv   Jason Cooper
• [GIT PULL v4] ARM: kirkwood: fdt conversion progress   Jason Cooper
• [PATCH 0/2] Add support for DNS-320 and DNS-325 using devicetree   Jason Cooper
• [PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Jason Cooper
• [PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Jason Cooper
• [PATCH 2/2] ARM: kirkwood: Convert orion-nand to fdt   Jason Cooper
• [PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Jason Cooper
• [PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Jason Cooper
• [PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Jason Cooper
• [PATCH 0/7 v4] ARM: kirkwood: fdt: convert kirkwood to fdt   Jason Cooper
• [PATCH 1/7] ARM: orion: spi: remove enable_clock_fix which is not used   Jason Cooper
• [PATCH 2/7] ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data.   Jason Cooper
• [PATCH 3/7 v2] ARM: orion: wdt: use resource vice direct access   Jason Cooper
• [PATCH 4/7 v4] ARM: kirkwood: add dreamplug (fdt) support.   Jason Cooper
• [PATCH 5/7 v2] ARM: kirkwood: convert uart0 to devicetree.   Jason Cooper
• [PATCH 6/7] ARM: kirkwood: rtc-mv devicetree bindings   Jason Cooper
• [PATCH 7/7] ARM: kirkwood: use devicetree for rtc-mv   Jason Cooper
• ARM926EJS boot failure on v3.3, __iounmap   Jason Cooper
• [PATCH 4/7 v4] ARM: kirkwood: add dreamplug (fdt) support.   Jason Cooper
• [PATCH 5/7 v2] ARM: kirkwood: convert uart0 to devicetree.   Jason Cooper
• [PATCH 7/7] ARM: kirkwood: use devicetree for rtc-mv   Jason Cooper
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Jason Cooper
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Jason Cooper
• [PATCH 0/9 v5] ARM: kirkwood: fdt: convert kirkwood to fdt   Jason Cooper
• [PATCH 1/9] ARM: orion: spi: remove enable_clock_fix which is not used   Jason Cooper
• [PATCH 2/9] ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data.   Jason Cooper
• [PATCH 3/9 v3] ARM: orion: wdt: use resource vice direct access   Jason Cooper
• [PATCH 4/9] ARM: kirkwood: fdt: use mrvl ticker symbol   Jason Cooper
• [PATCH 5/9] ARM: kirkwood: fdt: absorb kirkwood_init()   Jason Cooper
• [PATCH 6/9 v2] ARM: kirkwood: fdt: facilitate new boards during fdt migration   Jason Cooper
• [PATCH 7/9] ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0   Jason Cooper
• [PATCH 8/9 v2] ARM: kirkwood: rtc-mv devicetree bindings   Jason Cooper
• [PATCH 9/9] ARM: kirkwood: use devicetree for rtc-mv   Jason Cooper
• [PATCH 0/9 v5] ARM: kirkwood: fdt: convert kirkwood to fdt   Jason Cooper
• [PATCH 0/9 v5] ARM: kirkwood: fdt: convert kirkwood to fdt   Jason Cooper
• [PATCH V3 2/3] ARM: kirkwood: Convert orion-nand to fdt   Jason Cooper
• [PATCH V2 1/3] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Jason Cooper
• [PATCH V2 3/3] ARM: kirkwood: Define NAND partitions in dts   Jason Cooper
• [PATCH V2 3/3] ARM: kirkwood: Define NAND partitions in dts   Jason Cooper
• [PATCH] ARM: kirkwood: fdt: use IEEE1275 status = "okay".   Jason Cooper
• [PATCH V3 5/5] mtd: Move fdt partition documentation to a seperate file   Jason Cooper
• Support for Iomega iConnect   Jason Cooper
• [PATCH V3 1/5] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Jason Cooper
• [PATCH V4 0/3] ARM: Kirkwood: Convert DNS-325 & DNS-320 to access nand via devicetree (was: Add support for DNS-320 and DNS-325 using devicetree)   Jason Cooper
• Support for Iomega iConnect   Jason Cooper
• [PATCH] serial: PL011: clear pending interrupts   James Courtier-Dutton
• [PATCH] ARM: OMAP: hwmod: Use sysc_fields->srst_shift and get rid of hardcoded SYSC_TYPE2_SOFTRESET_MASK   Cousson, Benoit
• [PATCH 00/12] mfd: twl: Fix for irqdomain/next + SPARSE_IRQ + MMC card detect   Benoit Cousson
• [PATCH 01/12] mfd: twl-core: don't depend on pdata->irq_base/end   Benoit Cousson
• [PATCH 02/12] mfd: twl-core: remove unneeded header   Benoit Cousson
• [PATCH 03/12] mfd: twl-core: Remove references already defined in header file   Benoit Cousson
• [PATCH 04/12] mfd: twl-core: Move IRQ allocation into twl[4030|6030]-irq files   Benoit Cousson
• [PATCH 05/12] mfd: twl4030-irq: Make SIH SPARSE_IRQ capable   Benoit Cousson
• [PATCH 06/12] mfd: twl4030-irq: micro-optimization on IRQ handler   Benoit Cousson
• [PATCH 07/12] mfd: twl-*: Change from pr_XXX to dev_XXX macros and various cleanups   Benoit Cousson
• [PATCH 08/12] gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support   Benoit Cousson
• [PATCH 09/12] gpio/twl: Add DT support to gpio-twl4030 driver   Benoit Cousson
• [PATCH 10/12] arm/dts: twl4030: Add twl4030-gpio node   Benoit Cousson
• [PATCH 11/12] mfd: twl4030-irq: Return twl6030_mmc_card_detect IRQ for board setup   Benoit Cousson
• [PATCH 12/12] ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files   Benoit Cousson
• [PATCH 11/12] mfd: twl4030-irq: Return twl6030_mmc_card_detect IRQ for board setup   Cousson, Benoit
• [PATCH 07/12] mfd: twl-*: Replace pr_ macros by the dev_ equivalent and do various cleanups   Benoit Cousson
• [PATCH 07/12] mfd: twl-*: Replace pr_ macros by the dev_ equivalent and do various cleanups   Cousson, Benoit
• [PATCH 11/12] mfd: twl4030-irq: Return twl6030_mmc_card_detect IRQ for board setup   Cousson, Benoit
• [PATCH 11/12] mfd: twl4030-irq: Return twl6030_mmc_card_detect IRQ for board setup   Cousson, Benoit
• [PATCH 11/12] mfd: twl4030-irq: Return twl6030_mmc_card_detect IRQ for board setup   Cousson, Benoit
• [RFC PATCH] of: DMA helpers: manage generic requests specification   Cousson, Benoit
• [RFC PATCH] of: DMA helpers: manage generic requests specification   Cousson, Benoit
• [GIT PULL] ARM: OMAP: IRQ domain support for INTC   Cousson, Benoit
• [PATCH v2 7/7] Document: devicetree: add OF documents for arch-mmp   Cousson, Benoit
• [GIT PULL] ARM: OMAP: IRQ domain support for INTC   Cousson, Benoit
• [PATCH v2 0/6] gpio/omap: Cleanup and adaptation to Device Tree   Cousson, Benoit
• [PATCH 08/12] gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support   Cousson, Benoit
• [GIT PULL] ARM: OMAP: GPIO cleanup and device tree adaptation   Cousson, Benoit
• [PATCH 08/12] gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support   Cousson, Benoit
• [GIT PULL] ARM: OMAP: i2c, gpio, spi and regulator DTS updates   Cousson, Benoit
• [PATCH 12/12] ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files   Cousson, Benoit
• OMAP DSS device tree design problems   Cousson, Benoit
• [GIT PULL] mfd: twl: Fix for irqdomain/next + SPARSE_IRQ + MMC card detect   Cousson, Benoit
• [PATCH 00/12] mfd: twl: Fix for irqdomain/next + SPARSE_IRQ + MMC card detect   Cousson, Benoit
• [PATCH 01/12] mfd: twl-core: don't depend on pdata->irq_base/end   Cousson, Benoit
• [GIT PULL] ARM: OMAP: i2c, gpio, spi and regulator DTS updates   Cousson, Benoit
• [GIT PULL] ARM: OMAP: i2c, gpio, spi and regulator DTS updates   Cousson, Benoit
• [GIT PULL] ARM: OMAP: i2c, gpio, spi and regulator DTS updates   Cousson, Benoit
• [GIT PULL] ARM: OMAP: i2c, gpio, spi, regulator and mmc DTS updates   Cousson, Benoit
• [PATCH] of: Add generic device tree DMA helpers   Cousson, Benoit
• [PATCH] of: Add generic device tree DMA helpers   Cousson, Benoit
• [PATCH] of: Add generic device tree DMA helpers   Cousson, Benoit
• [PATCH] of: Add generic device tree DMA helpers   Cousson, Benoit
• [PATCH 0/2] omap: board file changes to support dynamic irq alloc   Cousson, Benoit
• [PATCH 01/12] mfd: twl-core: don't depend on pdata->irq_base/end   Cousson, Benoit
• [PATCH] of: Add generic device tree DMA helpers   Cousson, Benoit
• [PATCH] of: Add generic device tree DMA helpers   Cousson, Benoit
• [PATCH v2 0/4] ARM: OMAP: boards: changes to support dynamic irq alloc   Cousson, Benoit
• [PATCH v2 0/4] ARM: OMAP: boards: changes to support dynamic irq alloc   Cousson, Benoit
• [RFC][PATCH 0/5] Convert GPMC to driver   Cousson, Benoit
• [RFC][PATCH 1/5] ARM: OMAP2+: gpmc: driver conversion   Cousson, Benoit
• [RFC][PATCH 1/5] ARM: OMAP2+: gpmc: driver conversion   Cousson, Benoit
• [GIT PULL] ARM: OMAP: i2c, gpio, spi, regulator and mmc DTS updates   Cousson, Benoit
• [PATCH 1/4] x86: add NO_IRQ macro   Alan Cox
• [PATCH 0/3] coupled cpuidle state support   Colin Cross
• [PATCH 0/3] coupled cpuidle state support   Colin Cross
• [PATCH 0/3] coupled cpuidle state support   Colin Cross
• [PATCH 0/3] coupled cpuidle state support   Colin Cross
• [PATCHv2 0/5] coupled cpuidle state support   Colin Cross
• [PATCHv2 1/5] cpuidle: refactor out cpuidle_enter_state   Colin Cross
• [PATCHv2 2/5] cpuidle: fix error handling in __cpuidle_register_device   Colin Cross
• [PATCHv2 3/5] cpuidle: add support for states that affect multiple cpus   Colin Cross
• [PATCHv2 4/5] cpuidle: coupled: add parallel barrier function   Colin Cross
• [PATCHv2 5/5] cpuidle: coupled: add trace events   Colin Cross
• [PATCHv2 0/5] coupled cpuidle state support   Colin Cross
• [PATCHv2 3/5] cpuidle: add support for states that affect multiple cpus   Colin Cross
• [PATCHv2 3/5] cpuidle: add support for states that affect multiple cpus   Colin Cross
• [PATCH 2/3] ARM: OMAP4: cpuidle: Use coupled cpuidle states to implement SMP cpuidle.   Colin Cross
• [PATCHv2 00/13] I2C updates   Shubhrajyoti D
• [PATCHv2 01/13] I2C : OMAP : make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME   Shubhrajyoti D
• [PATCHv2 02/13] OMAP : I2C : Remove reset at init   Shubhrajyoti D
• [PATCHv2 03/13] I2C: OMAP: Recover from Bus Busy condition   Shubhrajyoti D
• [PATCHv2 04/13] OMAP: I2C: I2C register restore only if context is lost   Shubhrajyoti D
• [PATCHv2 05/13] OMAP: I2C: Fix the interrupt clearing in OMAP4   Shubhrajyoti D
• [PATCHv2 06/13] OMAP: I2C: Fix the mismatch of pm_runtime enable and disable   Shubhrajyoti D
• [PATCHv2 07/13] OMAP: I2C: Optimise the remove code   Shubhrajyoti D
• [PATCHv2 08/13] OMAP: I2C: Fix the error handling   Shubhrajyoti D
• [PATCHv2 09/13] I2C: OMAP: Correct I2C revision for OMAP3   Shubhrajyoti D
• [PATCHv2 10/13] I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero   Shubhrajyoti D
• [PATCHv2 11/13] OMAP : I2C : use devm_* functions   Shubhrajyoti D
• [PATCHv2 12/13] I2C : OMAP : Fix the crash in i2c remove   Shubhrajyoti D
• [PATCHv2 13/13] OMAP: I2C: Handle error check for pm runtime   Shubhrajyoti D
• [PATCH v2] omap-serial: Fix the error handling in the omap_serial probe   Shubhrajyoti D
• [PATCH v10 3/3] iommu/exynos: Add iommu driver for Exynos Platforms   InKi Dae
• [PATCH v3 6/6] mfd: mc13xxx: Add i2c driver   Shubhrajyoti Datta
• ARM11MPcore: tlb_ops_need_broadcast causes deadlock   George G. Davis
• [PATCH] Add the Performance Monitoring Unit to the Trimslice device tree   Will Deacon
• [PATCH v2] ARM: perf: add PMU hotplug notifier   Will Deacon
• [PATCH 0/6] Miscellaneous nommu fixes   Will Deacon
• [PATCH 1/6] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Will Deacon
• [PATCH 2/6] kexec: crash: don't save swapper_pg_dir for !CONFIG_MMU configurations   Will Deacon
• [PATCH 3/6] ARM: nommu: fix typo in mm/Kconfig   Will Deacon
• [PATCH 4/6] ARM: suspend: fix CPU suspend code for !CONFIG_MMU configurations   Will Deacon
• [PATCH 5/6] ARM: nommu: Use VECTORS_BASE for vector copying with !MMU   Will Deacon
• [PATCH 6/6] ARM: mm: truncate memory banks to fit in 4GB space for classic MMU   Will Deacon
• [PATCH 6/6] ARM: mm: truncate memory banks to fit in 4GB space for classic MMU   Will Deacon
• [PATCH 6/6] ARM: mm: truncate memory banks to fit in 4GB space for classic MMU   Will Deacon
• [PATCH 0/4] perf IRQ fixes   Will Deacon
• oprofile and ARM A9 hardware counter   Will Deacon
• [PATCH] ARM: test for PMU feature on v7 (v2 with typo fix)   Will Deacon
• ARM11MPcore: tlb_ops_need_broadcast causes deadlock   Will Deacon
• [PATCH] ARM: test for PMU feature on v7 (v2 with typo fix)   Will Deacon
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Will Deacon
• [Android-virt] [PATCH] ARM: test for PMU feature on v7 (v2 with typo fix)   Will Deacon
• ARM11MPcore: tlb_ops_need_broadcast causes deadlock   Will Deacon
• ARM11MPcore: tlb_ops_need_broadcast causes deadlock   Will Deacon
• ARM11MPcore: tlb_ops_need_broadcast causes deadlock   Will Deacon
• [PATCH v4 0/3] ARM support for syscall tracing   Will Deacon
• [PATCH] ARM: test for PMU feature on v7 (v2 with typo fix)   Will Deacon
• [PATCH v3 00/13] gpio/omap: Some more driver cleanup and fixes   Tarun Kanti DebBarma
• [PATCH v3 01/13] gpio/omap: remove saved_fallingdetect, saved_risingdetect fields   Tarun Kanti DebBarma
• [PATCH v3 02/13] gpio/omap: fix wakeup_en register update in _set_gpio_wakeup()   Tarun Kanti DebBarma
• [PATCH v3 03/13] gpio/omap: remove suspend_wakeup field from struct gpio_bank   Tarun Kanti DebBarma
• [PATCH v3 04/13] gpio/omap: remove saved_wakeup field from struct gpio_bank   Tarun Kanti DebBarma
• [PATCH v3 05/13] gpio/omap: get rid of retrigger variable in gpio_irq_handler   Tarun Kanti DebBarma
• [PATCH v3 06/13] gpio/omap: fix trigger type to unsigned   Tarun Kanti DebBarma
• [PATCH v3 07/13] gpio/omap: fix _set_gpio_irqenable implementation   Tarun Kanti DebBarma
• [PATCH v3 08/13] gpio/omap: remove redundant decoding of gpio offset   Tarun Kanti DebBarma
• [PATCH v3 09/13] gpio/omap: remove suspend/resume callbacks   Tarun Kanti DebBarma
• [PATCH v3 10/13] gpio/omap: fix missing dataout context save in _set_gpio_dataout_reg   Tarun Kanti DebBarma
• [PATCH v3 11/13] gpio/omap: fix dataout register overwrite in _set_gpio_dataout_*   Tarun Kanti DebBarma
• [PATCH v3 12/13] gpio/omap: fix incorrect context restore logic in omap_gpio_runtime_resume   Tarun Kanti DebBarma
• [PATCH v3 13/13] gpio/omap: fix incorrect update to context.irqenable1   Tarun Kanti DebBarma
• [PATCH v3 10/13] gpio/omap: fix missing dataout context save in _set_gpio_dataout_reg   DebBarma, Tarun Kanti
• [PATCH v3 12/13] gpio/omap: fix incorrect context restore logic in omap_gpio_runtime_resume   DebBarma, Tarun Kanti
• [PATCH v3 05/13] gpio/omap: get rid of retrigger variable in gpio_irq_handler   DebBarma, Tarun Kanti
• [PATCH v3 12/13] gpio/omap: fix incorrect context restore logic in omap_gpio_runtime_resume   DebBarma, Tarun Kanti
• [PATCH v3 00/13] gpio/omap: Some more driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH v3 00/13] gpio/omap: Some more driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH v3 00/13] gpio/omap: Some more driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH v3 00/13] gpio/omap: Some more driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH v3 13/13] gpio/omap: fix incorrect update to context.irqenable1   DebBarma, Tarun Kanti
• [PATCH v3 11/13] gpio/omap: fix dataout register overwrite in _set_gpio_dataout_*   DebBarma, Tarun Kanti
• [PATCH v3 11/13] gpio/omap: fix dataout register overwrite in _set_gpio_dataout_*   DebBarma, Tarun Kanti
• [PATCH v3 11/13] gpio/omap: fix dataout register overwrite in _set_gpio_dataout_*   DebBarma, Tarun Kanti
• [PATCH v3 11/13] gpio/omap: fix dataout register overwrite in _set_gpio_dataout_*   DebBarma, Tarun Kanti
• [PATCH 0/2] omap: board file changes to support dynamic irq alloc   Tarun Kanti DebBarma
• [PATCH 1/2] omap1/board-files: fix OMAP_GPIO_IRQ usage with gpio_to_irq()   Tarun Kanti DebBarma
• [PATCH 2/2] omap2plus/board-files: fix OMAP_GPIO_IRQ usage with gpio_to_irq()   Tarun Kanti DebBarma
• [PATCH 0/2] omap: board file changes to support dynamic irq alloc   DebBarma, Tarun Kanti
• [PATCH v4 00/12] gpio/omap: Some more driver cleanup and fixes   Tarun Kanti DebBarma
• [PATCH v4 01/12] gpio/omap: remove saved_fallingdetect, saved_risingdetect fields   Tarun Kanti DebBarma
• [PATCH v4 02/12] gpio/omap: fix wakeup_en register update in _set_gpio_wakeup()   Tarun Kanti DebBarma
• [PATCH v4 03/12] gpio/omap: remove suspend_wakeup field from struct gpio_bank   Tarun Kanti DebBarma
• [PATCH v4 04/12] gpio/omap: remove saved_wakeup field from struct gpio_bank   Tarun Kanti DebBarma
• [PATCH v4 05/12] gpio/omap: get rid of retrigger variable in gpio_irq_handler   Tarun Kanti DebBarma
• [PATCH v4 06/12] gpio/omap: fix trigger type to unsigned   Tarun Kanti DebBarma
• [PATCH v4 07/12] gpio/omap: fix _set_gpio_irqenable implementation   Tarun Kanti DebBarma
• [PATCH v4 08/12] gpio/omap: remove redundant decoding of gpio offset   Tarun Kanti DebBarma
• [PATCH v4 09/12] gpio/omap: remove suspend/resume callbacks   Tarun Kanti DebBarma
• [PATCH v4 10/12] gpio/omap: fix missing dataout context save in _set_gpio_dataout_reg   Tarun Kanti DebBarma
• [PATCH v4 11/12] gpio/omap: fix incorrect context restore logic in omap_gpio_runtime_*   Tarun Kanti DebBarma
• [PATCH v4 12/12] gpio/omap: fix incorrect update to context.irqenable1   Tarun Kanti DebBarma
• [PATCH v2 0/4] ARM: OMAP: boards: changes to support dynamic irq alloc   Tarun Kanti DebBarma
• [PATCH v2 1/4] ARM: OMAP1: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()   Tarun Kanti DebBarma
• [PATCH v2 2/4] ARM: OMAP2+: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()   Tarun Kanti DebBarma
• [PATCH v2 3/4] drivers: input: Fix OMAP_GPIO_IRQ with gpio_to_irq() in ams_delta_serio_exit()   Tarun Kanti DebBarma
• [PATCH v2 4/4] ARM: OMAP: Remove OMAP_GPIO_IRQ macro definition   Tarun Kanti DebBarma
• [PATCH v2 0/4] ARM: OMAP: boards: changes to support dynamic irq alloc   DebBarma, Tarun Kanti
• [PATCH v4 00/12] gpio/omap: Some more driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH v4 RESEND 0/7] gpio/omap: Some more driver fixes   Tarun Kanti DebBarma
• [PATCH v4 RESEND 1/7] gpio/omap: fix wakeup_en register update in _set_gpio_wakeup()   Tarun Kanti DebBarma
• [PATCH v4 RESEND 2/7] gpio/omap: fix trigger type to unsigned   Tarun Kanti DebBarma
• [PATCH v4 RESEND 3/7] gpio/omap: fix _set_gpio_irqenable implementation   Tarun Kanti DebBarma
• [PATCH v4 RESEND 4/7] gpio/omap: fix missing dataout context save in _set_gpio_dataout_reg   Tarun Kanti DebBarma
• [PATCH v4 RESEND 5/7] gpio/omap: fix incorrect context restore logic in omap_gpio_runtime_*   Tarun Kanti DebBarma
• [PATCH v4 RESEND 6/7] gpio/omap: fix incorrect update to context.irqenable1   Tarun Kanti DebBarma
• [PATCH v4 RESEND 7/7] gpio/omap: fix redundant decoding of gpio offset   Tarun Kanti DebBarma
• [PATCH v2 0/4] ARM: OMAP: boards: changes to support dynamic irq alloc   DebBarma, Tarun Kanti
• [PATCH v4 RESEND 6/7] gpio/omap: fix incorrect update to context.irqenable1   DebBarma, Tarun Kanti
• [PATCH v4 RESEND 6/7] gpio/omap: fix incorrect update to context.irqenable1   DebBarma, Tarun Kanti
• [PATCH v4 RESEND 6/7] gpio/omap: fix incorrect update to context.irqenable1   DebBarma, Tarun Kanti
• [PATCH v4 RESEND 6/7] gpio/omap: fix incorrect update to context.irqenable1   Tarun Kanti DebBarma
• [PATCH v2 1/4] ARM: OMAP1: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()   DebBarma, Tarun Kanti
• [PATCH v3 0/4] ARM: OMAP: boards: changes to support dynamic irq alloc   Tarun Kanti DebBarma
• [PATCH v3 1/4] ARM: OMAP1: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()   Tarun Kanti DebBarma
• [PATCH v3 2/4] ARM: OMAP2+: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()   Tarun Kanti DebBarma
• [PATCH v3 3/4] drivers: input: Fix OMAP_GPIO_IRQ with gpio_to_irq() in ams_delta_serio_exit()   Tarun Kanti DebBarma
• [PATCH v3 4/4] ARM: OMAP: Remove OMAP_GPIO_IRQ macro definition   Tarun Kanti DebBarma
• [PATCH v3 1/4] ARM: OMAP1: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()   Tarun Kanti DebBarma
• [U-Boot] zImage and raw ramdisk support -- test   Wolfgang Denk
• [PATCH 2/6] mmc: Kconfig: remove choice between at91_mci and atmel-mci   Ludovic Desroches
• [PATCH 3/6] mmc: atmel-mci: remove the need for CONFIG_MMC_ATMELMCI_DMA   Ludovic Desroches
• [PATCH 1/3] mmc: atmel-mci: correct data timeout computation   Ludovic Desroches
• [PATCH 1/4] mmc: atmel-mci: add device tree support   Ludovic Desroches
• [PATCH v2 1/3] mmc: atmel-mci: add device tree support   Ludovic Desroches
• [RFC PATCH] slimbus message encoding/decoding   Sagar Dharia
• [PATCH v8 0/8] Consolidate cpuidle functionality   Deepthi Dharwar
• [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Russ Dill
• [PATCH 05/12] Add dummy smsc911x regulators to cm-t35.   Russ Dill
• 2.6.36 and higher version kernel slower than 2.6.25.1 kernel?   Xiachen Dong
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Hiroshi Doyu
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Hiroshi Doyu
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Hiroshi Doyu
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Hiroshi Doyu
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Hiroshi Doyu
• [PATCH v4] lpc32xx: Added ethernet driver   Eric Dumazet
• [PATCH v4] lpc32xx: Added ethernet driver   Eric Dumazet
• [PATCH v8] ARM: net: JIT compiler for packet filters   Eric Dumazet
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Eric Dumazet
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Randy Dunlap
• ARM11MPcore: tlb_ops_need_broadcast causes deadlock   EXTERNAL Waechtler Peter (Fa. TCP, CM-AI/PJ-CF31)
• [PATCH] mm: overwrite __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH   EXTERNAL Waechtler Peter (Fa. TCP, CM-AI/PJ-CF31)
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Richard Earnshaw
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Richard Earnshaw
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Richard Earnshaw
• [PATCH] ARM: include linux/bug.h in insn.c   Joachim Eastwood
• [PATCH 1/3] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Hans-Christian Egtvedt
• [PATCH] avr32: fix build failures from mis-naming of atmel_nand.h   Hans-Christian Egtvedt
• [PATCH] avr32: fix build failures from mis-naming of atmel_nand.h   Hans-Christian Egtvedt
• [PATCH] avr32: fix build failures from mis-naming of atmel_nand.h   Hans-Christian Egtvedt
• [PATCH 1/2] ARM: mx5: Use common function for configuring AIPS   Fabio Estevam
• [PATCH 2/2] ARM: mx35: Setup the AIPS registers   Fabio Estevam
• 0001-i.MX35-PDK-Chunghwa-CLAA070VC01-7-WVGA-TFT-Display-s.patch   Fabio Estevam
• [PATCH] ARM: mx35: Fix registration of camera clock   Fabio Estevam
• [PATCH v3] ARM : mx35: 3ds-board: add framebuffer device   Fabio Estevam
• I.MX35 PDK   Fabio Estevam
• [PATCH] ARM: mach-versatile: Fix PCI build error   Fabio Estevam
• [PATCH] ARM: kernel/bios32: Remove unused variable   Fabio Estevam
• I.MX35 PDK   Fabio Estevam
• I.MX35 PDK   Fabio Estevam
• [PATCH 1/3] drivers: base: add support for stmp-style devices   Fabio Estevam
• I.MX35 PDK   Fabio Estevam
• I.MX35 PDK   Fabio Estevam
• implementing "suspend to ram" on cortex A8 based on linux 3.0.8   Fabio Estevam
• [PATCH v2] ARM : mx35: 3ds-board: add framebuffer device   Fabio Estevam
• [PATCH 3/4] mx31moboard: Add ssi configuration   Fabio Estevam
• [PATCH 2/4] Add imx3sound sound support.   Fabio Estevam
• I.MX35 PDK   Fabio Estevam
• Want to Get Suggestion for MX28 USB Submisson   Fabio Estevam
• [PATCH v3 6/6] mfd: mc13xxx: Add i2c driver   Fabio Estevam
• [GIT PULL] i.MX35 3ds updates   Fabio Estevam
• Want to Get Suggestion for MX28 USB Submisson   Fabio Estevam
• [PATCH v1] i.MX35-PDK: Add Camera support   Fabio Estevam
• [PATCH] ARM: mach-mx35_3ds: Fix build warning due to the lack of 'const' annotation   Fabio Estevam
• [PATCH v1] i.MX35-PDK: Add Camera support   Fabio Estevam
• [PATCH v1] i.MX35-PDK: Add Camera support   Fabio Estevam
• [PATCH 4/4] ARM i.MX 3ds debugboard: register a dummy regulator for the smsc911x device   Fabio Estevam
• [PATCH 4/4] ARM i.MX 3ds debugboard: register a dummy regulator for the smsc911x device   Fabio Estevam
• [PATCH 4/4] ARM i.MX 3ds debugboard: register a dummy regulator for the smsc911x device   Fabio Estevam
• [PATCH 4/4] ARM i.MX 3ds debugboard: register a dummy regulator for the smsc911x device   Fabio Estevam
• [PATCH] ARM: 3ds_debugboard: Fix smsc911x driver probe   Fabio Estevam
• [PATCH v2] regulator: i.MX35-PDK Add regulator support   Fabio Estevam
• [PATCH] ARM: amba: adapt to regulator probe deferral change   Fabio Estevam
• [PATCH] ARM: mach-imx: Include <asm/system_misc.h>   Fabio Estevam
• [PATCH] ARM: imx: fix mc9s08dz60_gpiochip_match parameter type   Fabio Estevam
• [PATCH v6] lpc32xx: Added ethernet driver   Florian Fainelli
• [PATCH 1/1] net: phylib: add error checking if no phy found   Florian Fainelli
• [PATCH 1/1] net: phylib: remove the length limitation of mii bus id   Florian Fainelli
• [PATCH v3 0/3] ARM support for syscall tracing   Wade Farnsworth
• [PATCH v3 1/3] ARM: add support for the generic syscall.h interface   Wade Farnsworth
• [PATCH v3 2/3] ARM: add TRACEHOOK support   Wade Farnsworth
• [PATCH v3 3/3] ARM: support syscall tracing   Wade Farnsworth
• [PATCH v4 0/3] ARM support for syscall tracing   Wade Farnsworth
• [PATCH v4 1/3] ARM: add support for the generic syscall.h interface   Wade Farnsworth
• [PATCH v4 2/3] ARM: add TRACEHOOK support   Wade Farnsworth
• [PATCH v4 3/3] ARM: support syscall tracing   Wade Farnsworth
• at91: Error while registering DMA controller in 3.3-rc   Nicolas Ferre
• [GIT PULL] at91: irqdomain and device tree for AIC and GPIO   Nicolas Ferre
• [GIT PULL] at91: fixes for DMA registration (3.3-rc)   Nicolas Ferre
• [GIT PULL v2] at91: irqdomain and device tree for 3.4   Nicolas Ferre
• linux-next: manual merge of the cpuidle-cons tree with the arm-soc tree   Nicolas Ferre
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Nicolas Ferre
• [PATCH] dmaengine: at_hdmac: add slave config operation   Nicolas Ferre
• [RFC PATCH] of: DMA helpers: manage generic requests specification   Nicolas Ferre
• [PATCH] of: Add generic device tree DMA helpers   Nicolas Ferre
• [PATCH 1/6] ARM: at91: change AT91 Kconfig entry comment   Nicolas Ferre
• [PATCH 2/6] ARM: at91/Kconfig: change at91sam9g45 entry   Nicolas Ferre
• [PATCH 3/6] ARM: at91/Kconfig: add comment to at91sam9x5 family entry   Nicolas Ferre
• [PATCH 4/6] ARM: at91/Kconfig: add clarifications to AT91SAM9M10G45-EK entry   Nicolas Ferre
• [PATCH 5/6] ARM: at91/Kconfig: add AT91SAM9x5 family to AT91_EARLY_DBGU0 entry   Nicolas Ferre
• [PATCH 6/6] ARM: at91/Kconfig: website link for AT91SAM9G20-EK   Nicolas Ferre
• [PATCH 0/6] AT91 drivers Kconfig cleanup   Nicolas Ferre
• [PATCH 1/6] dmaengine: Kconfig: fix Atmel at_hdmac entry   Nicolas Ferre
• [PATCH 2/6] mmc: Kconfig: remove choice between at91_mci and atmel-mci   Nicolas Ferre
• [PATCH 3/6] mmc: atmel-mci: remove the need for CONFIG_MMC_ATMELMCI_DMA   Nicolas Ferre
• [PATCH 4/6] rtc: Kconfig: remove dependency for AT91 rtc driver   Nicolas Ferre
• [PATCH 5/6] Input: Kconfig: remove dependency for atmel_tsadcc driver   Nicolas Ferre
• [PATCH 6/6] hwrng: Kconfig: remove dependency for atmel-rng driver   Nicolas Ferre
• [PATCH] Fixes after disintegration of asm/system.h for ARM   Nicolas Ferre
• [PATCH] dmaengine: at_hdmac: add slave config operation   Nicolas Ferre
• [PATCH] of: Add generic device tree DMA helpers   Nicolas Ferre
• linux-next: manual merge of the arm-soc tree with the l2-mtd tree   Nicolas Ferre
• [PATCH] of: Add generic device tree DMA helpers   Nicolas Ferre
• [PATCH] of: Add generic device tree DMA helpers   Nicolas Ferre
• [PATCH] of: Add generic device tree DMA helpers   Nicolas Ferre
• [PATCH v2 1/2] of: Add generic device tree DMA helpers   Nicolas Ferre
• [PATCH 2/2] of: selftest/dma: Add selftest for new DT DMA request helpers   Nicolas Ferre
• [PATCH] of: dma/fixup   Nicolas Ferre
• [PATCH] of: Add generic device tree DMA helpers   Nicolas Ferre
• [PATCH] avr32: fix build failures from mis-naming of atmel_nand.h   Nicolas Ferre
• [PATCH 0/6] AT91 drivers Kconfig cleanup   Nicolas Ferre
• [PATCH] ARM: at91/at91sam9x5: add clkdev entries for DMA controllers   Nicolas Ferre
• [PATCH] avr32: fix build failures from mis-naming of atmel_nand.h   Nicolas Ferre
• [PATCH 2/3] mmc: atmel-mci: r/w proof capability only available since v2xx   Nicolas Ferre
• [PATCH 3/3] mmc: atmel-mci: add support for odd clock dividers   Nicolas Ferre
• [PATCH 1/4] mmc: atmel-mci: add device tree support   Nicolas Ferre
• [PATCH 2/4] arm: at91: at91sam9x5 add mci clk_lookup   Nicolas Ferre
• [PATCH 3/4] arm: at91: dt: sam9x5 add mci support   Nicolas Ferre
• [PATCH 4/4] arm: at91: dt: sam9g25ek add mci support   Nicolas Ferre
• [GIT PULL] AT91 drivers Kconfig cleanup   Nicolas Ferre
• [PATCH v2 1/3] mmc: atmel-mci: correct data timeout computation   Nicolas Ferre
• [PATCH 00/12] at91: 3.4-rc1 fixes   Nicolas Ferre
• [PATCH 01/12] ARM: at91/at91sam9x5: add clkdev entries for DMA controllers   Nicolas Ferre
• [PATCH 02/12] USB: ohci-at91: fix vbus_pin_active_low handling   Nicolas Ferre
• [PATCH 03/12] ARM: at91/USB host: specify and handle properly vbus_pin_active_low   Nicolas Ferre
• [PATCH 04/12] ARM: at91/dts: USB host vbus is active low   Nicolas Ferre
• [PATCH 05/12] USB: ohci-at91: rework and fix initialization   Nicolas Ferre
• [PATCH 06/12] USB: ohci-at91: change maximum number of ports   Nicolas Ferre
• [PATCH 07/12] USB: ohci-at91: coding style modifications with one-line ifs   Nicolas Ferre
• [PATCH 08/12] USB: ohci-at91: trivial return code name change   Nicolas Ferre
• [PATCH 09/12] ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file   Nicolas Ferre
• [PATCH 10/12] ARM: at91/NAND DT bindings: add comments   Nicolas Ferre
• [PATCH 11/12] USB: ehci-atmel: add needed of.h header file   Nicolas Ferre
• [PATCH 12/12] ARM: at91: fix check of valid GPIO for SPI and USB   Nicolas Ferre
• [PATCH] tty/serial: atmel_serial: fix RS485 half-duplex problem   Nicolas Ferre
• [PATCH] ARM: at91: include newly created system_misc.h file   Nicolas Ferre
• [PATCH 0/5] MMC: mmci: Provide bindings for Device Tree   Per Forlin
• [PATCH 3/5] MMC: mmci: Add generic Device Tree bindings to mmci core code   Per Forlin
• [PATCH 0/5] MMC: mmci: Provide bindings for Device Tree   Per Forlin
• [PATCH 1/3] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Mike Frysinger
• [PATCH 1/3] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Mike Frysinger
• [PATCH] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Mike Frysinger
• [PATCH] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Mike Frysinger
• 0001-i.MX35-PDK-Chunghwa-CLAA070VC01-7-WVGA-TFT-Display-s.patch   Alex Gershgorin
• 0001-i.MX35-PDK-Chunghwa-CLAA070VC01-7-WVGA-TFT-Display-s.patch   Alex Gershgorin
• I.MX35 PDK   Alex Gershgorin
• I.MX35 PDK   Alex Gershgorin
• I.MX35 PDK   Alex Gershgorin
• I.MX35 PDK   Alex Gershgorin
• I.MX35 PDK   Alex Gershgorin
• I.MX35 PDK   Alex Gershgorin
• I.MX35 PDK   Alex Gershgorin
• [PATCH] i.MX35-PDK: Add Camera support   Alex Gershgorin
• [PATCH] i.MX35-PDK: Add Camera support   Alex Gershgorin
• [PATCH v1] i.MX35-PDK: Add Camera support   Alex Gershgorin
• [PATCH v1] i.MX35-PDK: Add Camera support   Alex Gershgorin
• [PATCH] ARM: i.MX35: Add set_rate and round_rate calls to csi_clk   Alex Gershgorin
• [PATCH] ARM: i.MX35: Add set_rate and round_rate calls to csi_clk   Alex Gershgorin
• [PATCH] regulator: i.MX35-PDK Add regulator support   Alex Gershgorin
• [PATCH v1] regulator: i.MX35-PDK Add regulator support   Alex Gershgorin
• [PATCH] regmap: Add 24 bits support   Alex Gershgorin
• [PATCH v1] regulator: i.MX35-PDK Add regulator support   Alex Gershgorin
• [PATCH] regmap: Add 24 bits support   Alex Gershgorin
• [PATCH v1] regulator: i.MX35-PDK Add regulator support   Alex Gershgorin
• [PATCH v2] regulator: i.MX35-PDK Add regulator support   Alex Gershgorin
• [PATCH v2] regulator: i.MX35-PDK Add regulator support   Alex Gershgorin
• [PATCH] mfd: mc13xxx: add I2C support fix building for v3.4   Alex Gershgorin
• [PATCH] mfd: mc13xxx: add I2C support fix building for v3.4   Alex Gershgorin
• [PATCH] mfd: mc13xxx: add I2C support fix building for v3.4   Alex Gershgorin
• [PATCH] mfd: mc13xxx: add I2C support fix building for v3.4   Alex Gershgorin
• [PATCH v3] ARM: regulator: i.MX35-PDK Add regulator support   Alex Gershgorin
• [PATCH] ARM: OMAP: WiLink platform data for the PandaBoard   Mircea Gherzan
• [PATCH v2] ARM: OMAP: WiLink platform data for the PandaBoard   Mircea Gherzan
• [PATCH v2] ARM: OMAP: WiLink platform data for the PandaBoard   Mircea Gherzan
• [PATCH v2] ARM: OMAP: WiLink platform data for the PandaBoard   Mircea Gherzan
• [PATCH v7] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH v7] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH v8] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH v8] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH v8] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH v8 RESEND] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH v2] ARM: OMAP: WiLink platform data for the PandaBoard   Mircea Gherzan
• [PATCH v8 RESEND] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH v8 RESEND] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH v8 RESEND] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH v6 1/5] Extcon (external connector): import Android's switch class and modify.   Erik Gilling
• [PATCH v6 1/5] Extcon (external connector): import Android's switch class and modify.   Erik Gilling
• [PATCH 0/3] arm: tegra: dts: USB Updates for Tegra legacy mode / OTG   Simon Glass
• [RESEND PATCH 0/3] arm: tegra: dts: USB Updates for Tegra legacy mode / OTG   Simon Glass
• [RESEND PATCH 1/3] arm: tegra: dts: Support host/device selection and legacy mode   Simon Glass
• [RESEND PATCH 2/3] arm: tegra: dts: Add legacy mode support to Tegra2x USB1 port   Simon Glass
• [RESEND PATCH 3/3] arm: tegra: dts: Mark USB1 as an OTG port on Seaboard   Simon Glass
• [PATCH 0/3] arm: tegra: dts: USB Updates for Tegra legacy mode / OTG   Simon Glass
• Regression in 3.2.9 for omap-serial (at least)   Thomas Gleixner
• Regression in 3.2.9 for omap-serial (at least)   Thomas Gleixner
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Thomas Gleixner
• [PATCH v5 3/4] clk: introduce the common clock framework   Thomas Gleixner
• [PATCH v6 2/3] clk: introduce the common clock framework   Thomas Gleixner
• [PATCH v5 3/4] clk: introduce the common clock framework   Thomas Gleixner
• [PATCH v5 3/4] clk: introduce the common clock framework   Thomas Gleixner
• [PATCH v7 1/3] Documentation: common clk API   Thomas Gleixner
• [PATCHv2 02/14] X86 & IA64: adapt for dma_map_ops changes   Thomas Gleixner
• [PATCH 0/3] arm: fix build breakage in omap2plus_defconfig (linux-next)   Paul Gortmaker
• [PATCH 1/3] arm: anticipate build breakages due in pending merge   Paul Gortmaker
• [PATCH 2/3] arm: fix compile error in mach-omap2/board-omap4panda.c   Paul Gortmaker
• [PATCH 3/3] arm: more fallout from i2c conversions in board-omap4panda.c   Paul Gortmaker
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Paul Gortmaker
• [PATCH] arm: fix unresolved restart build failure in plat-iop/restart.c   Paul Gortmaker
• [PATCH] ARM: fix lcd power build failure in collie_defconfig   Paul Gortmaker
• [PATCH] ARM: pxa: fix regulator related build fail in magician_defconfig   Paul Gortmaker
• [PATCH v2] ARM: pxa: fix regulator related build fail in magician_defconfig   Paul Gortmaker
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Paul Gortmaker
• [PATCH v2] ARM: pxa: fix regulator related build fail in magician_defconfig   Paul Gortmaker
• [PATCH] ARM: pxa: fix regulator related build fail in magician_defconfig   Paul Gortmaker
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Paul Gortmaker
• Inconsistent kallsyms data on ARM.   Paul Gortmaker
• [PATCH] ARM: pxa: fix regulator related build fail in magician_defconfig   Paul Gortmaker
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Paul Gortmaker
• ARM: fix build failure on ux500 in linux-next   Paul Gortmaker
• linux-next: "ARM: make mach/io.h include optional" commit breaks cm_x2xx_defconfig   Paul Gortmaker
• [PATCH] avr32: fix build failures from mis-naming of atmel_nand.h   Paul Gortmaker
• [PATCH] ARM: fix lcd power build failure in collie_defconfig   Paul Gortmaker
• [PATCH] avr32: fix build failures from mis-naming of atmel_nand.h   Paul Gortmaker
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Paul Gortmaker
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Paul Gortmaker
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Paul Gortmaker
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Paul Gortmaker
• [PATCH v3] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Paul Gortmaker
• [PATCH] ARM: imx: fix compile error on missing arm_pm_idle   Paul Gortmaker
• [PATCH] ARM: imx: fix compile error on missing arm_pm_idle   Paul Gortmaker
• [PATCH] ARM: mach-imx: Include <asm/system_misc.h>   Paul Gortmaker
• [PATCH] ARM: include linux/bug.h in insn.c   Paul Gortmaker
• [PATCH] omap3_beagle: Init only uart3 used for console   Govindraj.R
• [PATCH] omap3_beagle: init uart2 for beagle rev AX/BX only   Govindraj.R
• [PATCH] omap_hwmod: Allow io_ring wakeup configuration for all modules.   Govindraj.R
• [RESEND PATCH] ARM :OMAP2+: UART: Remove some of uart default pads   Govindraj.R
• [PATCH 0/3] OMAP2+: UART: Enable tx wakeup + remove cpu checks   Govindraj.R
• [PATCH 1/3] OMAP2+: UART: Remove cpu checks for populating errata flags   Govindraj.R
• [PATCH 2/3] OMAP2+: UART: enable tx wakeup bit for wer reg   Govindraj.R
• [PATCH 3/3] OMAP2+: UART: replace omap34xx/omap4xx cpu checks with not omap24xx   Govindraj.R
• [PATCH] omap2+: pm: fix compilation break.   Govindraj.R
• arm: omap3: pm34xx.c: Some minor fixups   Mark A. Greer
• [PATCH 1/2] arm: omap3: pm34xx.c: Fix omap3_pm_init() error out paths   Mark A. Greer
• [PATCH 2/2] arm: omap3: pm34xx.c: Replace printk() with appropriate pr_*()   Mark A. Greer
• [PATCH 2/2] arm: omap3: pm34xx.c: Replace printk() with appropriate pr_*()   Mark A. Greer
• [PATCH v3 0/2] arm: omap3: pm34xx.c: Some minor fixups   Mark A. Greer
• [PATCH v3 1/2] arm: omap3: pm34xx.c: Fix omap3_pm_init() error out paths   Mark A. Greer
• [PATCH v3 2/2] arm: omap3: pm34xx.c: Replace printk() with appropriate pr_*()   Mark A. Greer
• [PATCH v3 1/2] ARM: OMAP: move generic EMAC init to separate file   Igor Grinberg
• [PATCH 2/2] ARM: OMAP3: cm-t3517: add EMAC support   Igor Grinberg
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Igor Grinberg
• [PATCH] ARM: OMAP: fix section mismatches in usb-host.c   Igor Grinberg
• [PATCH 05/12] Add dummy smsc911x regulators to cm-t35.   Igor Grinberg
• [PATCH 05/12] Add dummy smsc911x regulators to cm-t35.   Igor Grinberg
• [PATCH 05/12] Add dummy smsc911x regulators to cm-t35.   Igor Grinberg
• [PATCH] ARM: OMAP3: cm-t35: add support for power off   Igor Grinberg
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Igor Grinberg
• [GIT PULL] pull request from arch-pxa git on fixes branch   Igor Grinberg
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Igor Grinberg
• [GIT PULL] pull request from arch-pxa git on fixes branch   Igor Grinberg
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Igor Grinberg
• [PATCH v3] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Igor Grinberg
• How to add GPIO outputs to the PXA2xx MFP configuration?   Igor Grinberg
• [PATCH 05/12] Add dummy smsc911x regulators to cm-t35.   Igor Grinberg
• How to add GPIO outputs to the PXA2xx MFP configuration?   Igor Grinberg
• How to add GPIO outputs to the PXA2xx MFP configuration?   Igor Grinberg
• How to add GPIO outputs to the PXA2xx MFP configuration?   Igor Grinberg
• [PATCH 4/4] ARM: kirkwood: convert orion-wdt to fdt.   Simon Guinot
• [PATCH] Add devicetree support for i.MX27 SoCs   Shawn Guo
• [PATCH 00/20] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Shawn Guo
• [PATCH 01/20] ASoC: imx: move eukrea audmux call into ASoC machine driver   Shawn Guo
• [PATCH 02/20] ASoC: imx: move phycore audmux call into ASoC machine driver   Shawn Guo
• [PATCH 03/20] ARM: imx: merge audmux-v1 and audmux-v2   Shawn Guo
• [PATCH 04/20] ARM: imx: convert audmux to a platform driver   Shawn Guo
• [PATCH 05/20] ASoC: imx: move audmux driver into sound/soc/imx   Shawn Guo
• [PATCH 06/20] ASoC: imx: rename audmux prefix mxc to imx   Shawn Guo
• [PATCH 07/20] ASoC: imx: move SND_SOC_AC97_BUS selection down to machine driver   Shawn Guo
• [PATCH 08/20] ASoC: imx: initialize dma_params burstsize just in imx-ssi   Shawn Guo
• [PATCH 09/20] ASoC: imx: separate imx-pcm bits from imx-ssi driver   Shawn Guo
• [PATCH 10/20] ASoC: imx: add an explicit Kconfig option for imx-ssi driver   Shawn Guo
• [PATCH 11/20] ASoC: fsl: separate SSI and DMA Kconfig options   Shawn Guo
• [PATCH 12/20] ASoC: imx: merge sound/soc/imx into sound/soc/fsl   Shawn Guo
• [PATCH 13/20] ASoC: fsl: create fsl_utils to accommodate the common functions   Shawn Guo
• [PATCH 14/20] ASoC: fsl: check property 'compatible' for the machine name   Shawn Guo
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Shawn Guo
• [PATCH 16/20] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH 17/20] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers   Shawn Guo
• [PATCH 18/20] ASoC: fsl: add dt support for imx-audmux   Shawn Guo
• [PATCH 19/20] ASoC: rename sgtl5000 device tree binding document   Shawn Guo
• [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Shawn Guo
• [PATCH v7 1/2] mfd: Add anatop mfd driver   Shawn Guo
• [PATCH v7 1/2] mfd: Add anatop mfd driver   Shawn Guo
• [PATCH v7 1/2] mfd: Add anatop mfd driver   Shawn Guo
• [PATCH v6 2/2] Regulator: Add Anatop regulator driver   Shawn Guo
• iMX53 quick start board and SATA   Shawn Guo
• [PATCH 03/20] ARM: imx: merge audmux-v1 and audmux-v2   Shawn Guo
• [PATCH 04/20] ARM: imx: convert audmux to a platform driver   Shawn Guo
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Shawn Guo
• [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Shawn Guo
• [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Shawn Guo
• [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Shawn Guo
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Shawn Guo
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Shawn Guo
• [PATCH v2 01/17] ASoC: imx: move eukrea audmux call into ASoC machine driver   Shawn Guo
• [PATCH v2 02/17] ASoC: imx: move phycore audmux call into ASoC machine driver   Shawn Guo
• [PATCH v2 03/17] ARM: imx: merge audmux-v1 and audmux-v2   Shawn Guo
• [PATCH v2 04/17] ARM: imx: convert audmux to a platform driver   Shawn Guo
• [PATCH v2 05/17] ASoC: imx: move audmux driver into sound/soc/imx   Shawn Guo
• [PATCH v2 06/17] ASoC: imx: rename audmux prefix mxc to imx   Shawn Guo
• [PATCH v2 07/17] ASoC: imx: separate imx-pcm bits from imx-ssi driver   Shawn Guo
• [PATCH v2 08/17] ASoC: imx: add an explicit Kconfig option for imx-ssi driver   Shawn Guo
• [PATCH v2 09/17] ASoC: fsl: separate SSI and DMA Kconfig options   Shawn Guo
• [PATCH v2 10/17] ASoC: imx: merge sound/soc/imx into sound/soc/fsl   Shawn Guo
• [PATCH v2 11/17] ASoC: fsl: create fsl_utils to accommodate the common functions   Shawn Guo
• [PATCH v2 12/17] ASoC: fsl: check property 'compatible' for the machine name   Shawn Guo
• [PATCH v2 13/17] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Shawn Guo
• [PATCH v2 14/17] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH v2 15/17] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers   Shawn Guo
• [PATCH v2 16/17] ASoC: fsl: add dt support for imx-audmux   Shawn Guo
• [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver   Shawn Guo
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Shawn Guo
• [PATCH v2 01/17] ASoC: imx: move eukrea audmux call into ASoC machine driver   Shawn Guo
• [PATCH v2 10/17] ASoC: imx: merge sound/soc/imx into sound/soc/fsl   Shawn Guo
• [PATCH v8 2/2] Regulator: Add Anatop regulator driver   Shawn Guo
• [PATCH v2 10/17] ASoC: imx: merge sound/soc/imx into sound/soc/fsl   Shawn Guo
• [PATCH v2 11/17] ASoC: fsl: create fsl_utils to accommodate the common functions   Shawn Guo
• [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver   Shawn Guo
• [PATCH v2 16/17] ASoC: fsl: add dt support for imx-audmux   Shawn Guo
• [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver   Shawn Guo
• [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver   Shawn Guo
• [PATCH 1/3] drivers: base: add support for stmp-style devices   Shawn Guo
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Shawn Guo
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Shawn Guo
• [PATCH v2 09/17] ASoC: fsl: separate SSI and DMA Kconfig options   Shawn Guo
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Shawn Guo
• [PATCH v3 00/11] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Shawn Guo
• [PATCH v3 01/11] ASoC: core: missing set_fmt should not be complaint   Shawn Guo
• [PATCH v3 02/11] ASoC: fsl: separate SSI and DMA Kconfig options   Shawn Guo
• [PATCH v3 03/11] ASoC: imx: merge sound/soc/imx into sound/soc/fsl   Shawn Guo
• [PATCH v3 04/11] ASoC: fsl: rename imx-pcm Kconfig options and filename   Shawn Guo
• [PATCH v3 05/11] ASoC: fsl: create fsl_utils to accommodate the common functions   Shawn Guo
• [PATCH v3 06/11] ASoC: fsl: remove helper fsl_asoc_get_codec_dev_name   Shawn Guo
• [PATCH v3 07/11] ASoC: fsl: check property 'compatible' for the machine name   Shawn Guo
• [PATCH v3 08/11] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Shawn Guo
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH v3 10/11] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers   Shawn Guo
• [PATCH v3 11/11] ASoC: fsl: add imx-sgtl5000 machine driver   Shawn Guo
• [PATCH v3 00/11] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Shawn Guo
• [PATCH v3 08/11] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Shawn Guo
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH v3 10/11] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers   Shawn Guo
• [PATCH v3 10/11] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers   Shawn Guo
• [PATCH v3 08/11] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Shawn Guo
• [PATCH v3 10/11] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers   Shawn Guo
• [PATCH v3 00/11] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Shawn Guo
• [PATCH v3 00/11] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Shawn Guo
• [RFC] i.MX: drop secondary clocks   Shawn Guo
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Shawn Guo
• [PATCH v4] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Shawn Guo
• [PATCH v4 01/10] ASoC: fsl: separate SSI and DMA Kconfig options   Shawn Guo
• [PATCH v4 02/10] ASoC: imx: merge sound/soc/imx into sound/soc/fsl   Shawn Guo
• [PATCH v4 03/10] ASoC: fsl: rename imx-pcm Kconfig options and filename   Shawn Guo
• [PATCH v4 04/10] ASoC: fsl: create fsl_utils to accommodate the common functions   Shawn Guo
• [PATCH v4 05/10] ASoC: fsl: remove helper fsl_asoc_get_codec_dev_name   Shawn Guo
• [PATCH v4 06/10] ASoC: fsl: check property 'compatible' for the machine name   Shawn Guo
• [PATCH v4 07/10] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Shawn Guo
• [PATCH v4 08/10] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH v4 09/10] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers   Shawn Guo
• [PATCH v4 10/10] ASoC: fsl: add imx-sgtl5000 machine driver   Shawn Guo
• [PATCH v4 06/10] ASoC: fsl: check property 'compatible' for the machine name   Shawn Guo
• [GIT PULL] imx irq_domain migration   Shawn Guo
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Shawn Guo
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Shawn Guo
• [PATCH 2/7] of: add clock providers   Shawn Guo
• [PATCH 4/7] dt/clock: Add handling for fixed clocks and a clock node setup iterator   Shawn Guo
• [PATCH v4] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Shawn Guo
• [PATCH 4/7] dt/clock: Add handling for fixed clocks and a clock node setup iterator   Shawn Guo
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH 1/2] ARM: imx6q: add pll round_rate support   Shawn Guo
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Shawn Guo
• [PATCH v4 01/10] PWM: add pwm framework support   Shawn Guo
• [PATCH 1/3] ARM i.MX: Move i.MX pwm driver to pwm framework   Shawn Guo
• [PATCH v4 06/10] pwm: Add NVIDIA Tegra SoC support   Shawn Guo
• [PATCH v4 09/10] pwm: Add PXA support   Shawn Guo
• [PATCH 1/3] ARM i.MX: Move i.MX pwm driver to pwm framework   Shawn Guo
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Shawn Guo
• [PATCH v5] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Shawn Guo
• [PATCH v5 1/8] ASoC: fsl: separate SSI and DMA Kconfig options   Shawn Guo
• [PATCH v5 2/8] ASoC: imx: merge sound/soc/imx into sound/soc/fsl   Shawn Guo
• [PATCH v5 3/8] ASoC: fsl: rename imx-pcm Kconfig options and filename   Shawn Guo
• [PATCH v5 4/8] ASoC: fsl: create fsl_utils to accommodate the common functions   Shawn Guo
• [PATCH v5 5/8] ASoC: fsl: remove helper fsl_asoc_get_codec_dev_name   Shawn Guo
• [PATCH v5 6/8] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Shawn Guo
• [PATCH v5 7/8] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers   Shawn Guo
• [PATCH v5 8/8] ASoC: fsl: add imx-sgtl5000 machine driver   Shawn Guo
• [alsa-devel] [PATCH v5 8/8] ASoC: fsl: add imx-sgtl5000 machine driver   Shawn Guo
• [GIT PULL] imx irq_domain migration   Shawn Guo
• [alsa-devel] [PATCH v5 8/8] ASoC: fsl: add imx-sgtl5000 machine driver   Shawn Guo
• [GIT PULL] imx irq_domain migration   Shawn Guo
• [PATCH v5 2/8] ASoC: imx: merge sound/soc/imx into sound/soc/fsl   Shawn Guo
• [RFC/PATCH 4/4] pxa: convert to common clock framework   Shawn Guo
• [PATCH v7 2/3] clk: introduce the common clock framework   Shawn Guo
• [PATCH v7 2/3] clk: introduce the common clock framework   Shawn Guo
• [PATCH 1/2] ARM: imx6q: add pll round_rate support   Shawn Guo
• [PATCH v5 3/4] clk: introduce the common clock framework   Shawn Guo
• [PATCH v5 3/4] clk: introduce the common clock framework   Shawn Guo
• [PATCH v5 3/4] clk: introduce the common clock framework   Shawn Guo
• [PATCH 8/8] ARM i.MX27: implement clocks using common clock framework   Shawn Guo
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Shawn Guo
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Shawn Guo
• [PATCH 1/1] net: phylib: remove the length limitation of mii bus id   Shawn Guo
• [PATCH v7 2/3] clk: introduce the common clock framework   Shawn Guo
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Shawn Guo
• [PATCH v7 2/3] clk: introduce the common clock framework   Shawn Guo
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Shawn Guo
• [PATCH v13] Regulator: Add Anatop regulator driver   Shawn Guo
• [PATCH v13] Regulator: Add Anatop regulator driver   Shawn Guo
• [PATCH] ARM: dts: imx6q: add anatop regulators   Shawn Guo
• [PATCH] ARM: mxs: enforce semantics of clk_prepare()/clk_unprepare() and clk_enable()/clk_disable()   Shawn Guo
• [PATCH] rtc: add support for Freescale SNVS RTC   Shawn Guo
• [PATCH 1/1] ARM iMX28: incorrect frac/div calculation   Shawn Guo
• [PATCH 00/10] clk: cleanup on basic clks   Shawn Guo
• [PATCH 01/10] clk: use kzalloc in clk_register_mux   Shawn Guo
• [PATCH 02/10] clk: remove unnecessary EXPORT_SYMBOL_GPL   Shawn Guo
• [PATCH 03/10] clk: add "const" for clk_ops of basic clks   Shawn Guo
• [PATCH 04/10] clk: declare clk_ops of basic clks in clk-provider.h   Shawn Guo
• [PATCH 05/10] clk: align error return of basic clks registeration   Shawn Guo
• [PATCH 06/10] clk: fixed-rate: Don't open code kstrdup()   Shawn Guo
• [PATCH 07/10] clk: Constify parent name arrays   Shawn Guo
• [PATCH 08/10] clk: fixed-rate: registration error handling fixup   Shawn Guo
• [PATCH 09/10] clk: dynamically allocate parent_names basic clk registration   Shawn Guo
• [PATCH 10/10] clk: copy parent_names in clk-mux registration   Shawn Guo
• [PATCH 09/10] clk: dynamically allocate parent_names basic clk registration   Shawn Guo
• [PATCH 02/10] clk: remove unnecessary EXPORT_SYMBOL_GPL   Shawn Guo
• [PATCH v5 2/8] ASoC: imx: merge sound/soc/imx into sound/soc/fsl   Shawn Guo
• [PATCH] Regulator: anatop-regulator: patching to device-tree property "reg".   Shawn Guo
• [PATCH v2 1/1] ARM: imx28: add basic dt support   Shawn Guo
• [PATCH] ASoC: sgtl5000: fix power on/off of MIC bias   Shawn Guo
• [PATCH] ASoC: fsl: assign dma peripheral type according to bus topology   Shawn Guo
• [PATCH v2 1/1] ARM: imx28: add basic dt support   Shawn Guo
• [alsa-devel] [PATCH] ASoC: sgtl5000: fix power on/off of MIC bias   Shawn Guo
• i.MX28 die temperature   Shawn Guo
• [PATCH] ASoC: fsl: enable ssi clock in probe function   Shawn Guo
• [PATCH] ASoC: sgtl5000: fix power on/off of MIC bias   Shawn Guo
• [PATCH] ASoC: fsl: enable ssi clock in probe function   Shawn Guo
• [PATCH] ASoC: fsl: enable ssi clock in probe function   Shawn Guo
• [PATCH 03/17] ARM: mark const init data with __initconst instead of __initdata   Shawn Guo
• [PATCH] ARM: imx: fix ‘arm_pm_idle’ undeclared error   Shawn Guo
• [PATCH] ARM: dts: imx6q: add anatop regulators   Shawn Guo
• [PATCH v3 1/1] ARM: imx28: add basic dt support   Shawn Guo
• [PATCH 03/17] ARM: mark const init data with __initconst instead of __initdata   Shawn Guo
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Shawn Guo
• [PATCH] ASoC: fsl: enable ssi clock in probe function   Shawn Guo
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Shawn Guo
• [PATCH] ARM: amba: adapt to regulator probe deferral change   Shawn Guo
• [PATCH] ARM: amba: adapt to regulator probe deferral change   Shawn Guo
• [PATCH 1/2] ARM: fix builds due to missing <asm/system_misc.h> includes   Shawn Guo
• [PATCH] ARM: amba: adapt to regulator probe deferral change   Shawn Guo
• [PATCH 1/2] regulator: fix sysfs name collision between dummy and fixed dummy regulator   Shawn Guo
• [PATCH 2/2] regulator: rename function regulator_register_fixed   Shawn Guo
• [PATCH] ARM: imx: fix mc9s08dz60_gpiochip_match parameter type   Shawn Guo
• [PATCH 2/2] regulator: rename function regulator_register_fixed   Shawn Guo
• [PATCH] ARM: imx: fix mc9s08dz60_gpiochip_match parameter type   Shawn Guo
• [PATCH v4 1/1] ARM: imx28: add basic dt support   Shawn Guo
• [PATCH v4] ARM : mx35: 3ds-board: add framebuffer device   Wu Guoxing
• [PATCH v5] ARM : mx35: 3ds-board: add framebuffer device   Wu Guoxing
• [PATCH v6] ARM : mx35: 3ds-board: add framebuffer device   Wu Guoxing
• [PATCH 1/2] ARM: mx35: 3ds: add mc9s08dz60 gpio definitions   Wu Guoxing
• [PATCH v7 2/2] ARM : mx35: 3ds-board: add framebuffer device   Wu Guoxing
• [PATCH v8] ARM : mx35: 3ds-board: add framebuffer device   Wu Guoxing
• [PATCH v8] ARM : mx35: 3ds-board: add framebuffer device   Wu Guoxing
• [PATCH] ARM: remove ixp2000 platform   Krzysztof Halasa
• [PATCH] ARM: remove ixp2000 platform   Krzysztof Halasa
• [GIT PULL] Samsung Cleanup EXYNOS clock for v3.4   MyungJoo Ham
• [PATCH v6 1/5] Extcon (external connector): import Android's switch class and modify.   MyungJoo Ham
• [PATCH v4 1/2] mfd: add irq domain support for max8997 interrupts   MyungJoo Ham
• [PATCH v4 2/2] regulator: add device tree support for max8997   MyungJoo Ham
• [PATCH v6 2/5] Extcon: support generic GPIO extcon driver   MyungJoo Ham
• [PATCH v6 1/5] Extcon (external connector): import Android's switch class and modify.   MyungJoo Ham
• [PATCH 1/2] ARM: EXYNOS: Add USB HOST register definitions   Jingoo Han
• [PATCH v2 1/2] ARM: EXYNOS: Add USB HOST register definitions   Jingoo Han
• [PATCH v2 2/2] USB: ehci-s5p: add DMA burst support   Jingoo Han
• [PATCH v2 1/2] ARM: EXYNOS: Add USB HOST register definitions   Jingoo Han
• [PATCH v3] USB: ehci-s5p: add DMA burst support   Jingoo Han
• [PATCH v3 2/3] video: s3c-fb: remove 'default_win' element from platform data   Jingoo Han
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Jingoo Han
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Jingoo Han
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Jingoo Han
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Jingoo Han
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Jingoo Han
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Jingoo Han
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Jingoo Han
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Jingoo Han
• [PATCH v2 3/3] ARM: Samsung: Rework platform data of s3c-fb driver   Jingoo Han
• [PATCH v3 4/4] ARM: Samsung: Rework platform data of s3c-fb driver   Jingoo Han
• [PATCH v3 3/4] ARM: s3c64xx: Decouple lcd type from display controller window data   Jingoo Han
• [PATCH] regulator mc13783: bail out without platform data   Sascha Hauer
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Sascha Hauer
• [PATCH v2 2/2] dmaengine: Add support for multiple descriptors for imx-dma.   Sascha Hauer
• [PATCH v2 2/2] dmaengine: Add support for multiple descriptors for imx-dma.   Sascha Hauer
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Sascha Hauer
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Sascha Hauer
• [PATCH 0/4] i.MX27: visstrim_m10: Add several peripherals.   Sascha Hauer
• [PATCH] i.MX27: visstrim_m10: Add led support.   Sascha Hauer
• [GIT PULL] i.MX visstrim patches   Sascha Hauer
• [GIT PULL] i.MX27 devicetree support   Sascha Hauer
• [GIT PULL] i.MX31 Moboard updates   Sascha Hauer
• [PATCH v3] ARM: mx3: Setup AIPS registers   Sascha Hauer
• [GIT PULL] i.MX3 patches   Sascha Hauer
• [GIT PULL] i.MX3 patches   Sascha Hauer
• [PATCH] Add helper for registering a fixed regulator   Sascha Hauer
• [PATCH 1/4] regulator fixed: Do not report enumaratable voltages if there are none   Sascha Hauer
• [PATCH 2/4] regulator: provide a helper for registering a fixed regulator   Sascha Hauer
• [PATCH 3/4] ARM i.MX pcm037: register a dummy regulator for the smsc911x device   Sascha Hauer
• [PATCH 4/4] ARM i.MX 3ds debugboard: register a dummy regulator for the smsc911x device   Sascha Hauer
• [PATCH v5 3/4] clk: introduce the common clock framework   Sascha Hauer
• [PATCH 4/4] ARM i.MX 3ds debugboard: register a dummy regulator for the smsc911x device   Sascha Hauer
• [PATCH v5 3/4] clk: introduce the common clock framework   Sascha Hauer
• [PATCH 04/20] ARM: imx: convert audmux to a platform driver   Sascha Hauer
• [PATCH v5 3/4] clk: introduce the common clock framework   Sascha Hauer
• [PATCH v5 4/4] clk: basic clock hardware types   Sascha Hauer
• [PATCH v2 10/17] ASoC: imx: merge sound/soc/imx into sound/soc/fsl   Sascha Hauer
• [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver   Sascha Hauer
• [PATCH v2 01/17] ASoC: imx: move eukrea audmux call into ASoC machine driver   Sascha Hauer
• [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver   Sascha Hauer
• [PATCH v5 3/4] clk: introduce the common clock framework   Sascha Hauer
• [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver   Sascha Hauer
• [GIT PULL] i.MX 35/5 AIPS Setup   Sascha Hauer
• [PATCH v5 4/4] clk: basic clock hardware types   Sascha Hauer
• [PATCH v3 10/11] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers   Sascha Hauer
• [PATCH v3] ARM : mx35: 3ds-board: add framebuffer device   Sascha Hauer
• [PATCH v2 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   Sascha Hauer
• [RFC] i.MX: drop secondary clocks   Sascha Hauer
• [PATCH 1/2] clk: Add helper to get/put arrays of clocks   Sascha Hauer
• [PATCH 2/2] spi i.MX: do not depend on grouped clocks   Sascha Hauer
• [PATCH v5 3/4] clk: introduce the common clock framework   Sascha Hauer
• linux-next: manual merge of the arm-soc tree with the sound tree   Sascha Hauer
• [PATCH v5 0/4] common clk framework   Sascha Hauer
• [RFC] i.MX: drop secondary clocks   Sascha Hauer
• [PATCH v2 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   Sascha Hauer
• [PATCH v2 01/13] dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c   Sascha Hauer
• [PATCH v6] ARM : mx35: 3ds-board: add framebuffer device   Sascha Hauer
• [PATCH v2 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   Sascha Hauer
• [RFC] i.MX: drop secondary clocks   Sascha Hauer
• [RFC] i.MX: drop secondary clocks   Sascha Hauer
• [PATCH v3 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   Sascha Hauer
• [PATCH v6 2/3] clk: introduce the common clock framework   Sascha Hauer
• [PATCH v6 2/3] clk: introduce the common clock framework   Sascha Hauer
• [PATCH v6 3/3] clk: basic clock hardware types   Sascha Hauer
• [PATCH v5 3/4] clk: introduce the common clock framework   Sascha Hauer
• [PATCH v6 2/3] clk: introduce the common clock framework   Sascha Hauer
• [PATCH 1/2] ARM: mx35: 3ds: add mc9s08dz60 gpio definitions   Sascha Hauer
• [GIT PULL] i.MX25 iomux fix   Sascha Hauer
• [PATCH v1 3/5] ARM: imx28evk: add mmc dt support   Sascha Hauer
• [PATCH v5 3/4] clk: introduce the common clock framework   Sascha Hauer
• [PATCH 1/2] ARM: imx6q: add pll round_rate support   Sascha Hauer
• [PATCH v4] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Sascha Hauer
• [PATCH v6 3/3] clk: basic clock hardware types   Sascha Hauer
• [GIT PULL] i.MX35 3ds updates   Sascha Hauer
• Want to Get Suggestion for MX28 USB Submisson   Sascha Hauer
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Sascha Hauer
• [PATCH v4 03/10] pwm: Add device tree support   Sascha Hauer
• [PATCH] move pwm drivers to new framework   Sascha Hauer
• [PATCH 1/3] ARM i.MX: Move i.MX pwm driver to pwm framework   Sascha Hauer
• [PATCH 2/3] ARM Samsung: Move s3c pwm driver to pwm framework   Sascha Hauer
• [PATCH 3/3] ARM vt8500: Move vt8500 pwm driver to pwm framework   Sascha Hauer
• [PATCH v4 09/10] pwm: Add PXA support   Sascha Hauer
• [PATCH v6 2/3] clk: introduce the common clock framework   Sascha Hauer
• [PATCH v4 09/10] pwm: Add PXA support   Sascha Hauer
• [alsa-devel] [PATCH v4] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Sascha Hauer
• [PATCH 1/2] ARM: imx6q: add pll round_rate support   Sascha Hauer
• [PATCH 1/2] ARM: imx6q: add pll round_rate support   Sascha Hauer
• [PATCH 1/3] ARM i.MX: Move i.MX pwm driver to pwm framework   Sascha Hauer
• [PATCH v7 0/3] common clk framework   Sascha Hauer
• [PATCH v7 1/3] Documentation: common clk API   Sascha Hauer
• [PATCH 1/2] ARM: imx6q: add pll round_rate support   Sascha Hauer
• [RFC/PATCH 4/4] pxa: convert to common clock framework   Sascha Hauer
• [PATCH v7 1/3] Documentation: common clk API   Sascha Hauer
• [PATCH 1/2] ARM: imx6q: add pll round_rate support   Sascha Hauer
• [PATCH v5 3/4] clk: introduce the common clock framework   Sascha Hauer
• [PATCH v7 2/3] clk: introduce the common clock framework   Sascha Hauer
• i.MX: Convert v4/v5 based SoCs to common clock framework   Sascha Hauer
• [PATCH 1/8] clk: add a fixed factor clock   Sascha Hauer
• [PATCH 2/8] ARM i.MX: prepare for common clock framework   Sascha Hauer
• [PATCH 3/8] ARM i.MX timer: request correct clock   Sascha Hauer
• [PATCH 4/8] ARM i.MX: Add common clock support for pllv1   Sascha Hauer
• [PATCH 5/8] ARM i.MX1: implement clocks using common clock framework   Sascha Hauer
• [PATCH 6/8] ARM i.MX21: implement clocks using common clock framework   Sascha Hauer
• [PATCH 7/8] ARM i.MX25: implement clocks using common clock framework   Sascha Hauer
• [PATCH 8/8] ARM i.MX27: implement clocks using common clock framework   Sascha Hauer
• [PATCH 8/8] ARM i.MX27: implement clocks using common clock framework   Sascha Hauer
• [PATCH v1] i.MX35-PDK: Add Camera support   Sascha Hauer
• [PATCH v1] i.MX35-PDK: Add Camera support   Sascha Hauer
• [PATCH 1/2] clk: Fix error handling in fixed clock hardware type register fn   Sascha Hauer
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Sascha Hauer
• [PATCH] ARM: i.MX35: Add set_rate and round_rate calls to csi_clk   Sascha Hauer
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Sascha Hauer
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Sascha Hauer
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Sascha Hauer
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Sascha Hauer
• [PATCH v7 1/3] Documentation: common clk API   Sascha Hauer
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Sascha Hauer
• [PATCH 4/4] clk: wm831x: Add initial WM831x clock driver   Sascha Hauer
• [PATCH 4/4] clk: wm831x: Add initial WM831x clock driver   Sascha Hauer
• [PATCH 1/8] clk: add a fixed factor clock   Sascha Hauer
• [PATCH 1/8] clk: add a fixed factor clock   Sascha Hauer
• [PATCH 4/4] ARM i.MX 3ds debugboard: register a dummy regulator for the smsc911x device   Sascha Hauer
• [PATCH 09/10] clk: dynamically allocate parent_names basic clk registration   Sascha Hauer
• [PATCH] ARM: 3ds_debugboard: Fix smsc911x driver probe   Sascha Hauer
• [PATCH 09/10] clk: dynamically allocate parent_names basic clk registration   Sascha Hauer
• Occasional crashes in suspend-resume with MMC transactions   Hebbar, Gururaja
• [PATCH v1 5/9] arm/PCI: don't export pci_flags   Bjorn Helgaas
• [PATCH v3 04/34] arm/PCI: remove arch pci_flags definition   Bjorn Helgaas
• [PATCH v3 05/34] arm/PCI: use pci_flags PCI_PROBE_ONLY instead of arm-specific flag   Bjorn Helgaas
• [PATCH 06/11] PCI: Keep pci_fixup_irqs() around after init   Bjorn Helgaas
• [PATCH 06/11] PCI: Keep pci_fixup_irqs() around after init   Bjorn Helgaas
• [PATCH v2 2/7] arm/PCI: don't export pci_flags   Bjorn Helgaas
• [PATCH] Initial Device Tree system for Snowball   Niklas Hernaeus
• [PATCH 1/1] of: add dma-mask binding   Benjamin Herrenschmidt
• [PATCH v2.1 01/10] cpu: Introduce clear_tasks_mm_cpumask() helper   Benjamin Herrenschmidt
• [PATCHv2 04/14] PowerPC: adapt for dma_map_ops changes   Benjamin Herrenschmidt
• [PATCH v3 00/30] mach/io.h cleanup and removal   Rob Herring
• [PATCH v3 01/30] usb: ohci-pxa27x: add explicit include of hardware.h   Rob Herring
• [PATCH v3 02/30] ARM: provide runtime hook for ioremap/iounmap   Rob Herring
• [PATCH v3 03/30] ARM: imx: convert to common runtime ioremap hook   Rob Herring
• [PATCH v3 04/30] ARM: msm: use runtime ioremap hook   Rob Herring
• [PATCH v3 05/30] ARM: msm: clean-up mach/io.h   Rob Herring
• [PATCH v3 06/30] ARM: iop13xx: use runtime ioremap hook   Rob Herring
• [PATCH v3 07/30] ARM: iop13xx: move io.h externs to pci.h   Rob Herring
• [PATCH v3 08/30] ARM: OMAP: Remove remaining includes for mach/io.h   Rob Herring
• [PATCH v3 09/30] [media] davinci: remove includes of mach/io.h   Rob Herring
• [PATCH v3 10/30] ARM: davinci: remove unneeded mach/io.h include   Rob Herring
• [PATCH v3 11/30] ARM: orion5x: clean-up mach/io.h   Rob Herring
• [PATCH v3 12/30] ARM: tegra: clean-up mach/io.h   Rob Herring
• [PATCH v3 13/30] ARM: ep93xx: clean-up mach/io.h   Rob Herring
• [PATCH v3 14/30] ARM: at91: add explicit include of hardware.h to uncompressor   Rob Herring
• [PATCH v3 15/30] ARM: dove: add explicit include of dove.h to addr-map.c   Rob Herring
• [PATCH v3 16/30] ARM: clps711x: remove unneeded include of mach/io.h   Rob Herring
• [PATCH v3 17/30] ARM: make mach/io.h include optional   Rob Herring
• [PATCH v3 18/30] ARM: remove bunch of now unused mach/io.h files   Rob Herring
• [PATCH v3 19/30] ARM: kill off __mem_pci   Rob Herring
• [PATCH v3 20/30] iop13xx: use more regular PCI I/O space handling   Rob Herring
• [PATCH v3 21/30] ARM: Add fixed PCI i/o mapping   Rob Herring
• [PATCH v3 22/30] ARM: tegra: use fixed PCI i/o mapping   Rob Herring
• [PATCH v3 23/30] ARM: integrator: use fixed PCI i/o mapping   Rob Herring
• [PATCH v3 24/30] ARM: shark: use fixed PCI i/o mapping   Rob Herring
• [PATCH v3 25/30] ARM: footbridge: use fixed PCI i/o mapping   Rob Herring
• [PATCH v3 26/30] ARM: dove: use fixed PCI i/o mapping   Rob Herring
• [PATCH v3 27/30] ARM: kirkwood: use fixed PCI i/o mapping   Rob Herring
• [PATCH v3 28/30] ARM: ixp23xx: use fixed PCI i/o mapping   Rob Herring
• [PATCH v3 29/30] ARM: iop13xx: use fixed PCI i/o mapping   Rob Herring
• [PATCH v3 30/30] ARM: orion5x: use fixed PCI i/o mapping   Rob Herring
• [PULL] generic irq chip and pl061 irqdomain support   Rob Herring
• [PATCH v2 7/7] Document: devicetree: add OF documents for arch-mmp   Rob Herring
• [PATCH] ARM: remove ixp2000 platform   Rob Herring
• [PATCH v4 1/4] ARM: provide runtime hook for ioremap/iounmap   Rob Herring
• [PATCH v4 2/4] ARM: imx: convert to common runtime ioremap hook   Rob Herring
• [PATCH v4 3/4] ARM: msm: use runtime ioremap hook   Rob Herring
• [PATCH v4 4/4] ARM: iop13xx: use runtime ioremap hook   Rob Herring
• [PATCH v3 02/30] ARM: provide runtime hook for ioremap/iounmap   Rob Herring
• [PATCH v4 3/4] ARM: msm: use runtime ioremap hook   Rob Herring
• [PATCH v5 1/7] ARM: provide runtime hook for ioremap/iounmap   Rob Herring
• [PATCH v5 2/7] ARM: imx: convert to common runtime ioremap hook   Rob Herring
• [PATCH v5 3/7] ARM: msm: use runtime ioremap hook   Rob Herring
• [PATCH v5 4/7] ARM: iop13xx: use runtime ioremap hook   Rob Herring
• [PATCH v5 5/7] ARM: ixp4xx: use runtime ioremap hook   Rob Herring
• [PATCH v5 6/7] ARM: ebsa110: use runtime ioremap hook   Rob Herring
• [PATCH v5 7/7] ARM: remove compile time __arch_ioremap/__arch_iounmap   Rob Herring
• [PATCH v5 5/7] ARM: ixp4xx: use runtime ioremap hook   Rob Herring
• [PATCH v5 5/7] ARM: ixp4xx: use runtime ioremap hook   Rob Herring
• [PATCH] ARM: ebsa110: use runtime ioremap hook   Rob Herring
• [PULL] of nand generic binding   Rob Herring
• [PATCH 1/1] of: add dma-mask binding   Rob Herring
• [PATCH 1/5 v2] i2c/gpio: add DT support   Rob Herring
• [PATCH 1/5 v2] i2c/gpio: add DT support   Rob Herring
• [PATCH 1/1] of: add dma-mask binding   Rob Herring
• [PATCH 6/6] ARM: at91: add Shutdown Controller (SHDWC) DT support   Rob Herring
• [PATCH 5/6] ARM: at91: add ram controller DT support   Rob Herring
• [PATCH 5/6] ARM: at91: add ram controller DT support   Rob Herring
• [PATCH 00/11] ARM: tegra: Add PCIe device tree support   Rob Herring
• [PATCH 5/6] ARM: at91: add ram controller DT support   Rob Herring
• [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree   Rob Herring
• [GIT PULL] mach/io.h clean-up and removal   Rob Herring
• [PATCH 2/5 v3] ARM: at91: sam9g20 add i2c DT support   Rob Herring
• [PATCH 5/5 v3] ARM: at91: sam9x5 add i2c DT support   Rob Herring
• [PATCH 5/6] ARM: at91: add ram controller DT support   Rob Herring
• [PATCH 1/5 v3] i2c/gpio: add DT support   Rob Herring
• [PATCH 5/5 v3] ARM: at91: sam9x5 add i2c DT support   Rob Herring
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Rob Herring
• [PATCH 2/5 v3] ARM: at91: sam9g20 add i2c DT support   Rob Herring
• [GIT PULL] mach/io.h clean-up and removal   Rob Herring
• [PATCH 0/4] mach/io.h cleanup fixes   Rob Herring
• [PATCH 1/4] ARM: fix ioremap/iounmap for !CONFIG_MMU   Rob Herring
• [PATCH 2/4] ARM: iop13xx: fix missing declaration of iop13xx_init_early   Rob Herring
• [PATCH 3/4] ARM: create a common IOMEM definition   Rob Herring
• [PATCH 4/4] ARM: __io abuse cleanup   Rob Herring
• [PATCH] stmmac: Add device-tree support   Rob Herring
• [PATCH 3/4] ARM: create a common IOMEM definition   Rob Herring
• [PATCH] stmmac: Add device-tree support   Rob Herring
• [PATCH v6 2/3] clk: introduce the common clock framework   Rob Herring
• [PATCH v6 3/3] clk: basic clock hardware types   Rob Herring
• [PATCH v6 3/3] clk: basic clock hardware types   Rob Herring
• [PATCH v4 0/2] ARM: Exynos: Add irq_domain and device tree support for combiner   Rob Herring
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Rob Herring
• [PATCH v1 3/5] ARM: imx28evk: add mmc dt support   Rob Herring
• [PATCH v1 3/5] ARM: imx28evk: add mmc dt support   Rob Herring
• [PATCH v6 2/3] clk: introduce the common clock framework   Rob Herring
• [PULL] generic irq chip and pl061 irqdomain support   Rob Herring
• [PATCH 0/7] Highbank clock support using DT   Rob Herring
• [PATCH 1/7] clk: fix orphan list iterator to be safe   Rob Herring
• [PATCH 2/7] of: add clock providers   Rob Herring
• [PATCH 3/7] of: Add of_property_match_string() to find index into a string list   Rob Herring
• [PATCH 4/7] dt/clock: Add handling for fixed clocks and a clock node setup iterator   Rob Herring
• [PATCH 5/7] dt/clock: add a simple provider get function   Rob Herring
• [PATCH 6/7] dt/clock: add function to get parent clock name   Rob Herring
• [PATCH 7/7] clk: add highbank clock support   Rob Herring
• [GIT PULL] mach/io.h cleanup fixes   Rob Herring
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Rob Herring
• [GIT PULL] imx irq_domain migration   Rob Herring
• [PATCH 4/7] dt/clock: Add handling for fixed clocks and a clock node setup iterator   Rob Herring
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Rob Herring
• [PATCH 08/10] ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree   Rob Herring
• [PATCH 07/10] ARM: ux500: Provide local timer support for Device Tree   Rob Herring
• [PATCH v6 3/3] clk: basic clock hardware types   Rob Herring
• [PATCH v7 1/3] Documentation: common clk API   Rob Herring
• [PATCH] ARM: lib: use LDRD/STRD for data copy   Rob Herring
• i.MX: Convert v4/v5 based SoCs to common clock framework   Rob Herring
• [PATCH] ARM: lib: use LDRD/STRD for data copy   Rob Herring
• [PATCH] ARM: tegra: Include assembler.h in sleep.S to fix build break   Rob Herring
• [PATCH] ARM: tegra: Include assembler.h in sleep.S to fix build break   Rob Herring
• linux-next: "ARM: make mach/io.h include optional" commit breaks cm_x2xx_defconfig   Rob Herring
• [PATCH 1/2] ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol   Rob Herring
• [PATCH 2/2] ARM: pxa: use commom IOMEM definiton   Rob Herring
• Device tree and IO map_desc.   Rob Herring
• Device tree and IO map_desc.   Rob Herring
• [PATCH] ARM: tegra: Include assembler.h in sleep.S to fix build break   Rob Herring
• [PATCH] ARM: tegra: Include assembler.h in sleep.S to fix build break   Rob Herring
• [PATCH 1/2] ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol   Rob Herring
• [PATCH v2] ARM: pxa: use common IOMEM definition   Rob Herring
• [PATCH 1/2] ARM: VIC: Create common infrastructure for vic DT bindings   Rob Herring
• [GIT PULL] pxa io.h clean-up fixes   Rob Herring
• [PATCH] ARM: tegra: Include assembler.h in sleep.S to fix build break   Rob Herring
• [PATCH 1/2] ARM: VIC: Create common infrastructure for vic DT bindings   Rob Herring
• [GIT PULL 0/5] Second batch of arm-soc changes   Rob Herring
• [PATCH] ARM: at91: resurrect mach-at91/include/mach/io.h   Rob Herring
• [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Kevin Hilman
• [PATCHv3 4/6] ARM: OMAP3 PM: Enable IO Wake up   Kevin Hilman
• [PATCH] ARM: OMAP2+: voltage: ensure voltage used is exact voltage from OPP table   Kevin Hilman
• [PATCH] ARM: OMAP2+: omap_device: call all suspend, resume callbacks when OMAP_DEVICE_NO_IDLE_ON_SUSPEND is set   Kevin Hilman
• [PATCH] ARM: OMAP2+: voltage: ensure voltage used is exact voltage from OPP table   Kevin Hilman
• [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Kevin Hilman
• [PATCH] omap3_beagle: Init only uart3 used for console   Kevin Hilman
• [PATCH v7 0/9] Consolidate cpuidle functionality   Kevin Hilman
• [GIT PULL] ARM: OMAP: SR cleanups for v3.4   Kevin Hilman
• [PATCH] gpio/omap: fix wakeups on level-triggered GPIOs   Kevin Hilman
• [PATCH] mmc: omap_hsmmc: Fix Unbalanced pm_runtime_enable warning   Kevin Hilman
• [PATCHv3 0/6] ARM: OMAP3PLUS: IO daisychain support fixes   Kevin Hilman
• [PATCHv3 1/4] ARM: OMAP4: suspend: Program all domains to retention   Kevin Hilman
• [GIT PULL] ARM: OMAP: PM cleanups for v3.4   Kevin Hilman
• [PATCH] gpio/omap: Fix section warning for omap_mpuio_alloc_gc()   Kevin Hilman
• [PATCH V2] OMAP3+: PM: VP: fix integer truncation error   Kevin Hilman
• [GIT PULL] ARM: OMAP: UART: cleanups for v3.4   Kevin Hilman
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance   Kevin Hilman
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance   Kevin Hilman
• [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Kevin Hilman
• [GIT PULL] ARM: OMAP2+: PM: core support for SMPS regulators for v3.4   Kevin Hilman
• [GIT PULL] cpufreq: OMAP updates for v3.4   Kevin Hilman
• [GIT PULL] ARM: OMAP2+: PM: core support for SMPS regulators for v3.4   Kevin Hilman
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Kevin Hilman
• [PATCH] mmc: omap_hsmmc: Fix Unbalanced pm_runtime_enable warning   Kevin Hilman
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Kevin Hilman
• [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Kevin Hilman
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Kevin Hilman
• [GIT PULL] ARM: OMAP2+: PM: core support for SMPS regulators for v3.4   Kevin Hilman
• [GIT PULL] ARM: OMAP: GPIO cleanup and device tree adaptation   Kevin Hilman
• [PATCH] ARM: OMAP4: Workaround the OCP synchronisation issue with 32K synctimer.   Kevin Hilman
• [GIT PULL] ARM: OMAP2+: PM: core support for SMPS regulators for v3.4   Kevin Hilman
• [PATCH 0/6] gpio/omap: Some more driver cleanup and fixes   Kevin Hilman
• [PATCH v3 05/13] gpio/omap: get rid of retrigger variable in gpio_irq_handler   Kevin Hilman
• [PATCH v3 05/13] gpio/omap: get rid of retrigger variable in gpio_irq_handler   Kevin Hilman
• [PATCH v3 00/13] gpio/omap: Some more driver cleanup and fixes   Kevin Hilman
• [PATCH v3 11/13] gpio/omap: fix dataout register overwrite in _set_gpio_dataout_*   Kevin Hilman
• [PATCH v3 13/13] gpio/omap: fix incorrect update to context.irqenable1   Kevin Hilman
• [PATCH v3 00/13] gpio/omap: Some more driver cleanup and fixes   Kevin Hilman
• [PATCH v3 00/13] gpio/omap: Some more driver cleanup and fixes   Kevin Hilman
• [GIT PULL] ARM: OMAP2+: PM: core support for SMPS regulators for v3.4   Kevin Hilman
• [PATCH v3 11/13] gpio/omap: fix dataout register overwrite in _set_gpio_dataout_*   Kevin Hilman
• [PATCH] ARM: OMAP4: Workaround the OCP synchronisation issue with 32K synctimer.   Kevin Hilman
• [PATCH 0/3] coupled cpuidle state support   Kevin Hilman
• [linux-pm] [PATCH 0/3] coupled cpuidle state support   Kevin Hilman
• [GIT PULL] cpufreq: OMAP updates for v3.4   Kevin Hilman
• [PATCH 00/12] mfd: twl: Fix for irqdomain/next + SPARSE_IRQ + MMC card detect   Kevin Hilman
• [PATCH 01/12] mfd: twl-core: don't depend on pdata->irq_base/end   Kevin Hilman
• [PATCH] OMAP3: OPP: Test for IVA subsystem before attempting to add IVA OPP   Kevin Hilman
• [PATCH 01/12] mfd: twl-core: don't depend on pdata->irq_base/end   Kevin Hilman
• [PATCH 00/12] mfd: twl: Fix for irqdomain/next + SPARSE_IRQ + MMC card detect   Kevin Hilman
• [PATCH 01/12] mfd: twl-core: don't depend on pdata->irq_base/end   Kevin Hilman
• [PATCH] OMAP3: OPP: Test for IVA subsystem before attempting to add IVA OPP   Kevin Hilman
• [GIT PULL] cpufreq: OMAP updates for v3.4   Kevin Hilman
• [GIT PULL] cpufreq: OMAP updates for v3.4   Kevin Hilman
• [PATCH 6/6] ARM: OMAP: fix cpufreq build   Kevin Hilman
• [PATCHv2 3/5] cpuidle: add support for states that affect multiple cpus   Kevin Hilman
• [PATCH] OMAP3: OPP: Test for IVA subsystem before attempting to add IVA OPP   Kevin Hilman
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance   Kevin Hilman
• [PATCH v3 0/2] arm: omap3: pm34xx.c: Some minor fixups   Kevin Hilman
• [PATCH] OMAP2+: OPP: allow OPP enumeration to continue if device is not present   Kevin Hilman
• [PATCH] OMAP3: OPP: Test for IVA subsystem before attempting to add IVA OPP   Kevin Hilman
• [PATCH v4 00/12] gpio/omap: Some more driver cleanup and fixes   Kevin Hilman
• [PATCH v3 1/2] arm: omap3: pm34xx.c: Fix omap3_pm_init() error out paths   Kevin Hilman
• [PATCH v4 RESEND 0/7] gpio/omap: Some more driver fixes   Kevin Hilman
• [PATCH] CPUIdle: Reevaluate C-states under CPU load to favor deeper C-states   Kevin Hilman
• [PATCH v4 RESEND 6/7] gpio/omap: fix incorrect update to context.irqenable1   Kevin Hilman
• [PATCH v8 0/8] Consolidate cpuidle functionality   Kevin Hilman
• [PATCH v8 0/8] Consolidate cpuidle functionality   Kevin Hilman
• [PATCH v8 0/8] Consolidate cpuidle functionality   Kevin Hilman
• [PATCH v4 RESEND 6/7] gpio/omap: fix incorrect update to context.irqenable1   Kevin Hilman
• [PATCH] ARM: OMAP3+: fix oops triggered in omap_prcm_register_chain_handler   Kevin Hilman
• [PATCH 0/3] OMAP2+: UART: Enable tx wakeup + remove cpu checks   Kevin Hilman
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Kevin Hilman
• [PATCH v4 RESEND 0/7] gpio/omap: Some more driver fixes   Kevin Hilman
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Kevin Hilman
• [GIT PULL] gpio/omap: more fixes for v3.4   Kevin Hilman
• [PATCH v4 RESEND 6/7] gpio/omap: fix incorrect update to context.irqenable1   Kevin Hilman
• [PATCH] ARM: OMAP3+: fix oops triggered in omap_prcm_register_chain_handler(v1)   Kevin Hilman
• [PATCH 6/6] ARM: OMAP: fix cpufreq build   Kevin Hilman
• [PATCH 9/9] ARM: omap: select CPU_FREQ_TABLE where needed   Kevin Hilman
• arm-soc/next/boards: mis-merge breaks build on OMAP4/Panda   Kevin Hilman
• [PATCH] cpufreq: OMAP: fix build errors: depends on ARCH_OMAP2PLUS   Kevin Hilman
• [GIT PULL] ARM: OMAP2+: PM: core support for SMPS regulators for v3.4   Kevin Hilman
• [PATCH] omap2+: pm: fix compilation break.   Kevin Hilman
• [PATCH-V3 0/3] ARM: OMAP2+: Add powerdomain & PRM support for AM33XX device   Kevin Hilman
• [PATCH] cpufreq: OMAP: fix build errors: depends on ARCH_OMAP2PLUS   Kevin Hilman
• [PATCH-V1] arm/dts: Add support for TI OMAP3 EVM board   Hiremath, Vaibhav
• [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data   Hiremath, Vaibhav
• [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data   Hiremath, Vaibhav
• [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data   Hiremath, Vaibhav
• [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH 2/3] ARM: OMAP2/3: Add idle_st bits for ST_32KSYNC timer to prcm-common header   Hiremath, Vaibhav
• [PATCH 0/3] ARM: OMAP1/2+: 32k-timer: Add hwmod lookup for 32k-timer   Hiremath, Vaibhav
• [PATCH v2 2/2] ARM: OMAP: sram: Add am33xx SRAM support (minimal)   Hiremath, Vaibhav
• [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: hwmod: Add new sysc_type3 into omap_hwmod required for am33xx   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH-V3 0/3] ARM: OMAP2+: Add powerdomain & PRM support for AM33XX device   Vaibhav Hiremath
• [PATCH-V3 1/3] ARM: OMAP3/4: omap_hwmod: Add rstst_off field to struct omap_hwmod_omap4_prcm   Vaibhav Hiremath
• [PATCH-V3 2/3] ARM: OMAP2+: powerdomain: Add offset & mask fields to struct powerdomain   Vaibhav Hiremath
• [PATCH-V3 3/3] ARM: OMAP3+: am33xx: Add powerdomain & PRM support   Vaibhav Hiremath
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: control: Add AM33XX control reg & sec clkctrl offset   Vaibhav Hiremath
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH] ARM: OMAP: hwmod: Fix error handling in functions used OMAP4 onwards   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH] ARM: OMAP: hwmod: Fix error handling in functions used OMAP4 onwards   Hiremath, Vaibhav
• [PATCH] ARM: OMAP: hwmod: Fix error handling in functions used OMAP4 onwards   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH-V3 0/3] ARM: OMAP2+: Add powerdomain & PRM support for AM33XX device   Hiremath, Vaibhav
• [PATCH] ARM: OMAP: hwmod: Fix error handling in functions used OMAP4 onwards   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• [PATCH-V2 0/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Vaibhav Hiremath
• [PATCH-V2 1/3] ARM: OMAP2/3: Add idle_st bits for ST_32KSYNC timer to prcm-common header   Vaibhav Hiremath
• [PATCH-V2 2/3] ARM: OMAP2+: hwmod data: Add 32k-sync timer data to hwmod database   Vaibhav Hiremath
• [PATCH-V2 3/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Vaibhav Hiremath
• [PATCH-V4 0/4] ARM: OMAP2+: Add voltagedomain, powerdomain & PRM support for AM33XX device   Vaibhav Hiremath
• [PATCH-V4 1/4] ARM: OMAP3+: am33xx: Add voltage domain data   Vaibhav Hiremath
• [PATCH-V4 2/4] ARM: OMAP3/4: omap_hwmod: Add rstst_off field to struct omap_hwmod_omap4_prcm   Vaibhav Hiremath
• [PATCH-V4 3/4] ARM: OMAP2+: powerdomain: Add offset & mask fields to struct powerdomain   Vaibhav Hiremath
• [PATCH-V4 4/4] ARM: OMAP3+: am33xx: Add powerdomain & PRM support   Vaibhav Hiremath
• [PATCH-V4 0/4] ARM: OMAP2+: Add voltagedomain, powerdomain & PRM support for AM33XX device   Hiremath, Vaibhav
• [PATCH] ARM: lib: use LDRD/STRD for data copy   Michael Hope
• [GIT PULL] ARM: OMAP: IRQ domain support for INTC   Johan Hovold
• [GIT PULL] ARM: OMAP: IRQ domain support for INTC   Johan Hovold
• [PATCH 03/35] Disintegrate asm/system.h for ARM [ver #2]   David Howells
• [PATCH] ARM: Fix missing linux/types.h #inclusion in asm/hardware/iop3xx.h   David Howells
• [PATCH 05/38] Disintegrate asm/system.h for ARM [ver #3]   David Howells
• [PATCH] Fixes after disintegration of asm/system.h for ARM   David Howells
• [PATCH] Fixes after disintegration of asm/system.h for ARM [ver #2]   David Howells
• [PATCH] Fixes after disintegration of asm/system.h for ARM   David Howells
• [PATCH 05/38] Disintegrate asm/system.h for ARM [ver #3]   David Howells
• iMX53 quick start board and SATA   Michael Hunold
• iMX53 quick start board and SATA   Michael Hunold
• iMX53 and MMC_CAP_SDIO_IRQ   Michael Hunold
• iMX53 and MMC_CAP_SDIO_IRQ   Michael Hunold
• iMX53 SATA performance   Michael Hunold
• [PATCH V2 1/1] mmc: start removing enable / disable API   Adrian Hunter
• [RFC][PATCH 1/5] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• [RFC][PATCH 1/5] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• [TMP][PATCH 5/5] OMAP3EVM: Test gpmc-nand   Jon Hunter
• [RFC][PATCH 1/5] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• [PATCH] ARM: OMAP: hwmod: Fix error handling in functions used OMAP4 onwards   Jon Hunter
• [PATCH 1/3] OMAP2+: UART: Remove cpu checks for populating errata flags   Jon Hunter
• [PATCH 1/3] OMAP2+: UART: Remove cpu checks for populating errata flags   Jon Hunter
• [PATCH] ARM: OMAP: hwmod: Fix error handling in functions used OMAP4 onwards   Jon Hunter
• [PATCH 1/3] OMAP2+: UART: Remove cpu checks for populating errata flags   Jon Hunter
• [PATCH] ARM: OMAP: hwmod: Fix error handling in functions used OMAP4 onwards   Jon Hunter
• [PATCH] ARM: OMAP: hwmod: Fix error handling in functions used OMAP4 onwards   Jon Hunter
• [PATCH-V2 3/3] ARM: OMAP: Make OMAP clocksource source selection runtime   Jon Hunter
• [PATCH v4] lpc32xx: Added ethernet driver   Ben Hutchings
• [PATCH v4] lpc32xx: Added ethernet driver   Ben Hutchings
• [PATCH v4] lpc32xx: Added ethernet driver: smp_wmb()   Ben Hutchings
• [PATCH v4] lpc32xx: Added ethernet driver: smp_wmb()   Ben Hutchings
• [GIT PULL] cpufreq: OMAP updates for v3.4   Grazvydas Ignotas
• [GIT PULL] cpufreq: OMAP updates for v3.4   Grazvydas Ignotas
• [PATCH] OMAP: HSMMC: avoid erratum workaround when transceiver is attached   Grazvydas Ignotas
• [GIT PULL] ARM: OMAP2+: PM: core support for SMPS regulators for v3.4   Grazvydas Ignotas
• ARM: ep93xx: convert vision_ep9307 to MULTI_IRQ_HANDLER   Jamie Iles
• [alsa-devel] [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Takashi Iwai
• [alsa-devel] [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Takashi Iwai
• [PATCH V2 1/1] mmc: start removing enable / disable API   Subhash Jadavani
• [PATCH V2 1/1] mmc: start removing enable / disable API   Subhash Jadavani
• Linux 3.3-rc5 and pxa-gpio possible regression   Robert Jarzmik
• Status of gpio-pxa driver and dummy clock   Robert Jarzmik
• Status of gpio-pxa driver and dummy clock   Robert Jarzmik
• Status of gpio-pxa driver and dummy clock   Robert Jarzmik
• [PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.   Jason
• [PATCH 0/4] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• [PATCH] mach-kirkwood: Support for DLink DNS-320 & DNS-325 NAS   Jason
• [PATCH 0/4] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• [PATCH 3/4] ARM: kirkwood: convert rtc-mv to fdt.   Jason
• [PATCH 4/4] ARM: kirkwood: convert orion-wdt to fdt.   Jason
• [PATCH 4/4] ARM: kirkwood: convert orion-wdt to fdt.   Jason
• [PATCH 3/4] ARM: kirkwood: convert rtc-mv to fdt.   Jason
• [PATCH 0/4] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• [PATCH 4/4] ARM: kirkwood: convert orion-wdt to fdt.   Jason
• [PATCH 0/4] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• [PULL REQUEST] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• [PULL REQUEST] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• [PATCH 5/5 v2] ARM: kirkwood: convert orion-wdt to fdt.   Jason
• [PATCH 4/4] ARM: kirkwood: convert orion-wdt to fdt.   Jason
• [PATCH 5/5 v2] ARM: kirkwood: convert orion-wdt to fdt.   Jason
• [PATCH 3/4] ARM: kirkwood: convert rtc-mv to fdt.   Jason
• [PATCH 4/5 v2] ARM: kirkwood: convert rtc-mv to fdt.   Jason
• [GIT PULL v3] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• [GIT PULL v3] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• [GIT PULL v3] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• [PULL REQUEST v2] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• [PULL REQUEST v2] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• [PULL REQUEST v2] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• [PULL REQUEST v2] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• [PULL REQUEST v2] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Jason
• revert merge commit de68f28 in for-next?   Jason
• [RFC 00/14] Generic clk for Orion platforms.   Jason
• revert merge commit de68f28 in for-next?   Jason
• [RFC 00/14] Generic clk for Orion platforms.   Jason
• [RFC 00/14] Generic clk for Orion platforms.   Jason
• [RFC 09/14] MV SATA: Add per channel clk/clkdev support.   Jason
• [RFC 00/14] Generic clk for Orion platforms.   Jason
• [RFC 09/14] MV SATA: Add per channel clk/clkdev support.   Jason
• [PATCH] mach-kirkwood: Support for DLink DNS-320 & DNS-325 NAS   Jason
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Jason
• [PATCH 14/14] ARM: kirkwood: use devicetree to init sata_mv   Jason
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Jason
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Jason
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Jason
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Jason
• [GIT PULL v4] ARM: kirkwood: fdt conversion progress   Jason
• [GIT PULL v4] ARM: kirkwood: fdt conversion progress   Jason
• [GIT PULL v4] ARM: kirkwood: fdt conversion progress   Jason
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Jason
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Jason
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Jason
• [PATCH 1/3] regulator: add pre-regulator support for 88pm860x   Jett.Zhou
• [PATCH 2/3] power_supply: Enable battery-charger for 88pm860x   Jett.Zhou
• [PATCH 3/3] ARM: MMP: add 88pm860x battery-charger support   Jett.Zhou
• [PATCH 1/8] ARM: tegra: export tegra_gpio_{en,dis}able   Olof Johansson
• [PATCH 3/8] ARM: tegra: select CPU_FREQ_TABLE   Olof Johansson
• [PATCH v2 1/6] ARM: tegra: do not hide dma declarations   Olof Johansson
• [PATCH v2 2/6] ARM: tegra: select CPU_FREQ_TABLE   Olof Johansson
• [PATCH v2 3/6] ARM: tegra: build localtimer support only when needed   Olof Johansson
• [PATCH v2 6/6] ARM: tegra: export usb phy symbols   Olof Johansson
• [PATCH v2 5/6] ARM: tegra: USB_ULPI needs USB   Olof Johansson
• [PATCH] ARM: tegra: match SoC name not board name in DT board files   Olof Johansson
• [PATCH] ARM: dt: Add ARM PMU to tegra*.dtsi   Olof Johansson
• [PATCH] ARM: dt: Explicitly configure all serial ports on Tegra Cardhu   Olof Johansson
• [PATCH] ARM: tegra: Enable CPUIdle on Tegra20   Olof Johansson
• What's in tegra.git for 3.4   Olof Johansson
• [PATCH v2 1/6] ARM: tegra: do not hide dma declarations   Olof Johansson
• [GIT PULL 0/6] Tegra branches for 3.4   Olof Johansson
• [GIT PULL 0/6] Tegra branches for 3.4   Olof Johansson
• [PATCH v3 06/10] pwm: Add NVIDIA Tegra SoC support   Olof Johansson
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Olof Johansson
• [PATCH] ARM: tegra: update defconfig   Olof Johansson
• [PATCH v2 04/11] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Olof Johansson
• [PATCH 0/3] arm: tegra: dts: USB Updates for Tegra legacy mode / OTG   Olof Johansson
• Latest OMAP4 build errors   Olof Johansson
• [GIT PULL] fix to use static declarations for samsung stuff   Olof Johansson
• [PATCH] MAINTAINERS: update my email address   Olof Johansson
• [GIT PULL] maintainers file updates for DaVinci   Olof Johansson
• [GIT PULL] Urgent pre-emptive fixes for next merge window   Olof Johansson
• [GIT PULL] fixing and cleaning up rpmsg/remoteproc for 3.4   Olof Johansson
• [PATCH v2] ARM: OMAP2+: Fix build issues with missing include of linux/bug.h   Olof Johansson
• [PATCH v2 04/11] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Olof Johansson
• [GIT PULL] Samsung Cleanup EXYNOS clock for v3.4   Olof Johansson
• [GIT PULL] Samsung Cleanup S3C24XX for v3.4   Olof Johansson
• [PATCH] ARM: S3C2440: Fixed build error for s3c244x   Olof Johansson
• [GIT PULL v4] ARM: kirkwood: fdt conversion progress   Olof Johansson
• [GIT PULL] i.MX 35/5 AIPS Setup   Olof Johansson
• [GIT PULL][for v3.4]pull request from arch-pxa tree with rtc branch   Olof Johansson
• [GIT PULL][v3.4] pull request on pxa tree for DT branch   Olof Johansson
• [GIT PULL v2][for v3.4] request pull from arch-pxa on regulator branch   Olof Johansson
• [GIT PULL v4] ARM: kirkwood: fdt conversion progress   Olof Johansson
• [GIT PULL] few more fixes for v3.3-rc6   Olof Johansson
• [GIT PULL] arm-soc: last minute fixes for 3.3   Olof Johansson
• [GIT PULL] DaVinci DM644x video display support   Olof Johansson
• [PATCH 1/5] ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs   Olof Johansson
• [GIT PULL] Samsung Cleanup EXYNOS clock for v3.4   Olof Johansson
• [GIT PULL] Samsung board stuff for v3.4   Olof Johansson
• [GIT PULL 2/4] Samsung devel-pd for v3.4   Olof Johansson
• [GIT PULL 3/4] Samsung devel-mmc for v3.4   Olof Johansson
• [GIT PULL 3/4] Samsung devel-mmc for v3.4   Olof Johansson
• [GIT PULL] mach/io.h clean-up and removal   Olof Johansson
• [GIT PULL 1/4] Samsung devel for v3.4   Olof Johansson
• [GIT PULL 4/4] Samsung devel-dma for v3.4   Olof Johansson
• [GIT PULL 1/7] non-critical fixes part3 for upcoming merge window   Olof Johansson
• [GIT PULL] mach/io.h clean-up and removal   Olof Johansson
• [PATCH 2/2] ARM: at91: Use proper __iomem annotations   Olof Johansson
• [PATCH v2 2/2] arm/tegra: add timeout to PCIe PLL lock detection loop   Olof Johansson
• Conflict between Versatile Express DT conversion and local timer updates   Olof Johansson
• [GIT PULL] one kernel panic fix for v3.3-rc7   Olof Johansson
• [GIT PULL 2/4] Samsung devel-pd for v3.4   Olof Johansson
• Conflict between Versatile Express DT conversion and local timer updates   Olof Johansson
• [GIT PULL v2] Samsung cleanup EXYNOS clock for v3.4   Olof Johansson
• [GIT PULL v2] Samsung board patches for v3.4   Olof Johansson
• [GIT PULL v2 3/4] Samsung devel-mmc for v3.4   Olof Johansson
• [GIT PULL v2 4/4] Samsung devel-dma for v3.4   Olof Johansson
• [GIT PULL 2/4] Samsung devel-pd for v3.4   Olof Johansson
• [PATCH 3/4] ARM: create a common IOMEM definition   Olof Johansson
• [PATCH v3 07/12] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Olof Johansson
• [PATCH v3 08/12] ARM: EXYNOS: support EINT for EXYNOS4 and EXYNOS5   Olof Johansson
• [PATCH v3 12/12] ARM: dts: add initial dts file for EXYNOS5250, SMDK5250   Olof Johansson
• [PATCH v3 00/12] ARM: EXYNOS: add support new EXYNOS5250   Olof Johansson
• [GIT PULL] mach/io.h cleanup fixes   Olof Johansson
• [PATCH V2 2/3] pinctrl: allow concurrent gpio and mux function ownership of pins   Olof Johansson
• [PATCH V2 2/3] pinctrl: allow concurrent gpio and mux function ownership of pins   Olof Johansson
• [PATCH v4 11/12] ARM: EXYNOS: add support device tree enabled board file for EXYNOS5   Olof Johansson
• [PATCH v4 00/12] ARM: EXYNOS: add support new EXYNOS5250   Olof Johansson
• [PATCH] arm/tegra: pcie: fix return value of function   Olof Johansson
• [PATCH 00/11] ARM: tegra: Add PCIe device tree support   Olof Johansson
• [PATCH v3 4/5] ARM: tegra: select USB_ULPI if USB is selected   Olof Johansson
• [PATCH] ARM: tegra: update main repo and add patchwork   Olof Johansson
• [GIT PULL] Refresh of board branch for tegra   Olof Johansson
• [GIT PULL] A few more non-critical fixes for tegra   Olof Johansson
• [GIT PULL] A few more dt patches for tegra   Olof Johansson
• [GIT PULL 06/09] ARM: board specific updates   Olof Johansson
• [GIT PULL] pxa io.h clean-up fixes   Olof Johansson
• [GIT PULL] ARM: tegra: Include assembler.h in sleep.S to fix build break   Olof Johansson
• [GIT PULL 0/5] Second batch of arm-soc changes   Olof Johansson
• [GIT PULL][for 3.4] pull request from arch-pxa git for board branch   Olof Johansson
• [GIT PULL 1/5] ARM: cleanups of io includes   Olof Johansson
• [GIT PULL] pull request from arch-pxa git on fixes branch   Olof Johansson
• [PATCH v2 1/4] ARM: OMAP1: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()   Olof Johansson
• [GIT PULL] omap fixes for merge window   Olof Johansson
• [GIT PULL] USB AUXDATA fix for tegra   Olof Johansson
• [PATCH] ARM: LPC32xx: clock.c: Fix lpc-eth clock reference   Olof Johansson
• [GIT PULL] ARM: OMAP: i2c, gpio, spi, regulator and mmc DTS updates   Olof Johansson
• [GIT PULL] omap fixes for merge window   Olof Johansson
• [GIT PULL 1/5] ARM: cleanups of io includes   Olof Johansson
• [GIT PULL 1/5] ARM: cleanups of io includes   Olof Johansson
• [GIT PULL] pull request from arch-pxa git on fixes branch   Olof Johansson
• [GIT PULL] ARM: arm-soc fixes for 3.4-rc   Olof Johansson
• [PATCH 1/2] ARM: fix builds due to missing <asm/system_misc.h> includes   Olof Johansson
• [PATCH 2/2] ARM: clps711x: fix missing include file   Olof Johansson
• [GIT PULL] ARM: Two more fixes for merge window fallout   Olof Johansson
• [GIT PULL] ARM: Two more fixes for merge window fallout   Olof Johansson
• [GIT PULL] cpufreq: OMAP updates for v3.4   Dave Jones
• [GIT PULL] cpufreq: OMAP updates for v3.4   Dave Jones
• [PATCH v2 RE-SEND] [CPUFREQ] EXYNOS5250: Add support cpufreq for EXYNOS5250   Dave Jones
• [PATCH v2 RE-SEND] [CPUFREQ] EXYNOS5250: Add support cpufreq for EXYNOS5250   Dave Jones
• [PATCH 0/10] ARM: ux500: Enable Snowball for Device Tree   Lee Jones
• [PATCH 01/10] ARM: ux500: CONFIG: Enable Device Tree support for future endeavours   Lee Jones
• [PATCH 02/10] ARM: ux500: Initial Device Tree support for Snowball   Lee Jones
• [PATCH 03/10] ARM: ux500: combine the board init functions for DT boot   Lee Jones
• [PATCH 04/10] ARM: ux500: split dts file for snowball into generic part   Lee Jones
• [PATCH 05/10] ARM: ux500: db8500: list most devices in the snowball device tree   Lee Jones
• [PATCH 06/10] ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree   Lee Jones
• [PATCH 07/10] ARM: ux500: Provide local timer support for Device Tree   Lee Jones
• [PATCH 08/10] ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree   Lee Jones
• [PATCH 09/10] ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree   Lee Jones
• [PATCH 10/10] ARM: ux500: Enable PL022 SSP Controller in Device Tree   Lee Jones
• [PATCH 0/5] MMC: mmci: Provide bindings for Device Tree   Lee Jones
• [PATCH 1/5] MMC: mmci: Seperate ux500 variants from generic code   Lee Jones
• [PATCH 2/5] MMC: mmci: Seperate ARM variants from generic code   Lee Jones
• [PATCH 3/5] MMC: mmci: Add generic Device Tree bindings to mmci core code   Lee Jones
• [PATCH 4/5] MMC: mmci: Enable Device Tree support for ux500 variants   Lee Jones
• [PATCH 5/5] MMC: mmci: Add required documentation for Device Tree bindings   Lee Jones
• [PATCH 02/10] ARM: ux500: Initial Device Tree support for Snowball   Lee Jones
• [PATCH 08/10] ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree   Lee Jones
• [PATCH v4 09/15] ARM: ux500: convert to twd_local_timer_register() interface   Lee Jones
• [PATCH v4 09/15] ARM: ux500: convert to twd_local_timer_register() interface   Lee Jones
• [PATCH 3/5] MMC: mmci: Add generic Device Tree bindings to mmci core code   Lee Jones
• [PATCH 0/5] MMC: mmci: Provide bindings for Device Tree   Lee Jones
• [PATCH 0/5] MMC: mmci: Provide bindings for Device Tree   Lee Jones
• [GIT PULL] [for v3.4] Pull request containing ux500 DT enablement   Lee Jones
• [PATCH 2/5] MMC: mmci: Seperate ARM variants from generic code   Lee Jones
• [PATCH 2/5] MMC: mmci: Seperate ARM variants from generic code   Lee Jones
• [GIT PULL] [for v3.4] Pull request containing ux500 DT enablement   Lee Jones
• [PATCH] drivers/base: fix compiler warning in SoC export driver - idr should be ida   Lee Jones
• [PATCH] drivers/base: fix compiler warning in SoC export driver - idr should be ida   Lee Jones
• [PATCH] drivers/base: fix compiler warning in SoC export driver - idr should be ida   Lee Jones
• [PATCH] ARM: ux500: fix compile error in new timer code   Lee Jones
• [PATCH 5/9] USB: at91: Device udc add dt support   Greg KH
• [PATCH v2 1/7] misc: ddr: add LPDDR2 data from JESD209-2   Greg KH
• [PATCH v2 0/7] Add TI EMIF SDRAM controller driver   Greg KH
• [PATCH v2 1/7] misc: ddr: add LPDDR2 data from JESD209-2   Greg KH
• [PATCH v4] misc: ddr: add LPDDR2 data from JESD209-2   Greg KH
• [PATCH] ARM: iop: add missing includes   Greg KH
• [PATCH] atmel-serial: fix RS485 half-duplex problem   Greg KH
• [PATCH] atmel-serial: fix RS485 half-duplex problem   Greg KH
• [INFO] : Hibernation and Resume between 2 similar devices   PINTU KUMAR
• [INFO] : Hibernation and Resume between 2 similar devices   PINTU KUMAR
• [INFO] : Hibernation and Resume between 2 similar devices   PINTU KUMAR
• [PATCH] ARM: remove ixp2000 platform   Imre Kaloz
• [PATCH 2/3] ARM: Exynos: Add DRM core device support for Universal C210 board   Sachin Kamat
• [PATCH 3/3] ARM: Exynos: Add DRM core support for NURI board   Sachin Kamat
• [PATCH v5 3/4] clk: introduce the common clock framework   Saravana Kannan
• [PATCH v7 2/3] clk: introduce the common clock framework   Saravana Kannan
• [PATCH v7 1/3] Documentation: common clk API   Saravana Kannan
• [PATCH v7 2/3] clk: introduce the common clock framework   Saravana Kannan
• [PATCH v7 2/3] clk: introduce the common clock framework   Saravana Kannan
• [PATCH 1/2] clk: Fix error handling in fixed clock hardware type register fn   Saravana Kannan
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Saravana Kannan
• [PATCH 1/2] clk: Fix error handling in fixed clock hardware type register fn   Saravana Kannan
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Saravana Kannan
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Saravana Kannan
• [PATCH v7 2/3] clk: introduce the common clock framework   Saravana Kannan
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Saravana Kannan
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Saravana Kannan
• [PATCH 1/2] clk: Fix error handling in fixed clock hardware type register fn   Saravana Kannan
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Saravana Kannan
• [PATCH v7 2/3] clk: introduce the common clock framework   Saravana Kannan
• [PATCH v7 1/3] Documentation: common clk API   Saravana Kannan
• [PATCH 1/2] clk: Fix error handling in fixed clock hardware type register fn   Saravana Kannan
• [PATCH v7 1/3] Documentation: common clk API   Saravana Kannan
• [PATCH v7 1/3] Documentation: common clk API   Saravana Kannan
• [PATCH v7 1/3] Documentation: common clk API   Saravana Kannan
• [PATCH v7 2/3] clk: introduce the common clock framework   Saravana Kannan
• [PATCH v7 2/3] clk: introduce the common clock framework   Saravana Kannan
• [PATCH v7 2/3] clk: introduce the common clock framework   Saravana Kannan
• [PATCH v7 2/3] clk: introduce the common clock framework   Saravana Kannan
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Saravana Kannan
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Saravana Kannan
• [PATCH v7 2/3] clk: introduce the common clock framework   Saravana Kannan
• [PATCH v7 2/3] clk: introduce the common clock framework   Saravana Kannan
• [PATCH 1/2] mach-ux500: cache operations are atomic on PL310   Srinidhi Kasagar
• [PATCH 14/15] watchdog/mpcore_wdt: Add clock framework support   Srinidhi Kasagar
• [PATCH 07/16] mm/arm: use vm_flags_t for vma flags   Konstantin Khlebnikov
• [PATCH] ARM: lib: use LDRD/STRD for data copy   Boojin Kim
• [PATCH] ARM: lib: use LDRD/STRD for data copy   Boojin Kim
• [PATCH] ARM: lib: use LDRD/STRD for data copy   Boojin Kim
• [PATCH 1/2] ARM: lib: Add optimized memcpy with 64 byte pld size   Boojin Kim
• [PATCH 2/2] ARM: lib: use LDRD/STRD for data copy   Boojin Kim
• [PATCH 2/2] ARM: lib: use LDRD/STRD for data copy   Boojin Kim
• [PATCH 1/2] ARM: lib: Add optimized memcpy with 64 byte pld size   Boojin Kim
• [PATCH 2/2] ARM: lib: use LDRD/STRD for data copy   Boojin Kim
• [PATCH 0/4] memcpy optimized with strd/ldrd   Boojin Kim
• [PATCH] serial: PL011: clear pending interrupts   Kim, Jong-Sung
• [PATCH] serial: PL011: clear pending interrupts   Kim, Jong-Sung
• [GIT PULL] merge PL330 DMAC driver   Kukjin Kim
• [PATCH v3] ARM: S3C24XX DMA resume regression fix   Kukjin Kim
• [PATCH v3 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support   Kukjin Kim
• [PATCH] ARM: S3C64XX: Add some more Cragganmore module IDs to the table   Kukjin Kim
• [PATCH] ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci   Kukjin Kim
• [GIT PULL] Samsung fixes-4 for v3.3   Kukjin Kim
• [GIT PULL] Samsung fixes-4 for v3.3   Kukjin Kim
• [PATCH] ARM: S3C24XX: Fix Section mismatch   Kukjin Kim
• [PATCH 0/4] Use clock functions also for clk_h and clk_p on S3C2443/2416   Kukjin Kim
• [PATCH 0/3] S3C24XX: Enable DMA on S3C2416 by sharing S3C2443-DMA   Kukjin Kim
• [PATCH 0/4] S3C24XX: Another move of code to the new mach directory   Kukjin Kim
• [PATCH] ARM: S3C24XX: Fix Section mismatch   Kukjin Kim
• [GIT PULL] fix to use static declarations for samsung stuff   Kukjin Kim
• [PATCH v2 2/3] gpio/samsung: add support GPIOlib for EXYNOS5250   Kukjin Kim
• [PATCH v2 04/11] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Kukjin Kim
• [PATCH] ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci   Kukjin Kim
• [PATCH] ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci   Kukjin Kim
• [PATCH] ARM: S3C2440: Fixed build error for s3c244x   Kukjin Kim
• [PATCH V6 1/5] ARM: exynos: Add support AFTR mode on EXYNOS4210   Kukjin Kim
• [GIT PULL] Samsung Cleanup S3C24XX for v3.4   Kukjin Kim
• [GIT PULL] Samsung Cleanup EXYNOS clock for v3.4   Kukjin Kim
• [GIT PULL] Samsung Cleanup EXYNOS clock for v3.4   Kukjin Kim
• [GIT PULL] Samsung Cleanup EXYNOS clock for v3.4   Kukjin Kim
• [PATCH V6 1/5] ARM: exynos: Add support AFTR mode on EXYNOS4210   Kukjin Kim
• [PATCH 0/4] ARM: SAMSUNG: Add __init attribute to functions calling s3c_set_platdata   Kukjin Kim
• [PATCH v3 0/4] ARM: Exynos4: Add irq domain and device tree support for wakeup interrupts   Kukjin Kim
• [PATCH 0/5] ARM: EXYNOS: update clock part for new EXYNOS SoC   Kukjin Kim
• [PATCH 1/5] ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs   Kukjin Kim
• [PATCH 2/5] ARM: EXYNOS: use static declaration on regarding clock   Kukjin Kim
• [PATCH 3/5] ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock   Kukjin Kim
• [PATCH 4/5] PM / devfreq: update the name of EXYNOS clock register   Kukjin Kim
• [PATCH 5/5] ARM: EXYNOS: add clock registers for exynos4x12-cpufreq   Kukjin Kim
• [GIT PULL] Samsung Cleanup EXYNOS clock for v3.4   Kukjin Kim
• [PATCH v2 RE-SEND] [CPUFREQ] EXYNOS4X12: Add support cpufreq for EXYNOS4X12   Kukjin Kim
• [PATCH v2 RE-SEND] [CPUFREQ] EXYNOS5250: Add support cpufreq for EXYNOS5250   Kukjin Kim
• [GIT PULL] Samsung board stuff for v3.4   Kukjin Kim
• [GIT PULL] Samsung Cleanup EXYNOS clock for v3.4   Kukjin Kim
• [GIT PULL 1/4] Samsung devel for v3.4   Kukjin Kim
• [GIT PULL 2/4] Samsung devel-pd for v3.4   Kukjin Kim
• [GIT PULL 3/4] Samsung devel-mmc for v3.4   Kukjin Kim
• [GIT PULL 4/4] Samsung devel-dma for v3.4   Kukjin Kim
• [GIT PULL] Samsung Cleanup S3C24XX for v3.4   Kukjin Kim
• [GIT PULL] Samsung Cleanup EXYNOS clock for v3.4   Kukjin Kim
• [GIT PULL] Samsung board stuff for v3.4   Kukjin Kim
• [GIT PULL 2/4] Samsung devel-pd for v3.4   Kukjin Kim
• [GIT PULL 4/4] Samsung devel-dma for v3.4   Kukjin Kim
• [GIT PULL 3/4] Samsung devel-mmc for v3.4   Kukjin Kim
• [GIT PULL v2] Samsung cleanup EXYNOS clock for v3.4   Kukjin Kim
• [GIT PULL v2] Samsung board patches for v3.4   Kukjin Kim
• [GIT PULL 1/4] Samsung devel for v3.4   Kukjin Kim
• [GIT PULL v2 3/4] Samsung devel-mmc for v3.4   Kukjin Kim
• [GIT PULL v2 4/4] Samsung devel-dma for v3.4   Kukjin Kim
• [PATCH 3/5] ARM: Exynos4: Add pinctrl devices and pin maps   Kukjin Kim
• [PATCH 5/5] mmc: sdhci-s3c: setup pins using pinctrl interface   Kukjin Kim
• [PATCH v2 3/3] gpio/samsung: use ioremap() for EXYNOS4 GPIOlib   Kukjin Kim
• [PATCH v3 00/12] ARM: EXYNOS: add support new EXYNOS5250   Kukjin Kim
• [PATCH v3 01/12] ARM: EXYNOS: to declare static for mach-exynos/common.c   Kukjin Kim
• [PATCH v3 02/12] ARM: EXYNOS: use exynos_init_uarts() instead of exynos4_init_uarts()   Kukjin Kim
• [PATCH v3 03/12] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Kukjin Kim
• [PATCH v3 04/12] ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5   Kukjin Kim
• [PATCH v3 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5   Kukjin Kim
• [PATCH v3 06/12] ARM: EXYNOS: add support for EXYNOS5250 SoC   Kukjin Kim
• [PATCH v3 07/12] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Kukjin Kim
• [PATCH v3 08/12] ARM: EXYNOS: support EINT for EXYNOS4 and EXYNOS5   Kukjin Kim
• [PATCH v3 09/12] ARM: EXYNOS: add support get_core_count() for EXYNOS5250   Kukjin Kim
• [PATCH v3 10/12] ARM: EXYNOS: add support ARCH_EXYNOS5 for EXYNOS5 SoCs   Kukjin Kim
• [PATCH v3 11/12] ARM: EXYNOS: add support device tree enabled board file for EXYNOS5   Kukjin Kim
• [PATCH v3 12/12] ARM: dts: add initial dts file for EXYNOS5250, SMDK5250   Kukjin Kim
• [PATCH v3 07/12] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Kukjin Kim
• [PATCH v3 07/12] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Kukjin Kim
• [PATCH v3 08/12] ARM: EXYNOS: support EINT for EXYNOS4 and EXYNOS5   Kukjin Kim
• [PATCH v3 12/12] ARM: dts: add initial dts file for EXYNOS5250, SMDK5250   Kukjin Kim
• [PATCH v3 09/12] ARM: EXYNOS: add support get_core_count() for EXYNOS5250   Kukjin Kim
• [PATCH v3 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5   Kukjin Kim
• [PATCH v3 00/12] ARM: EXYNOS: add support new EXYNOS5250   Kukjin Kim
• [PATCH v2 3/3] gpio/samsung: use ioremap() for EXYNOS4 GPIOlib   Kukjin Kim
• [PATCH 0/5] ARM: EXYNOS: add support PM for EXYNOS5250   Kukjin Kim
• [PATCH 1/5] ARM: EXYNOS: Remove GIC save & restore function   Kukjin Kim
• [PATCH 2/5] ARM: EXYNOS: Rename of function for pm.c   Kukjin Kim
• [PATCH 3/5] ARM: EXYNOS: Add PMU table for EXYNOS5250   Kukjin Kim
• [PATCH 4/5] ARM: EXYNOS: Add Clock register list for save and restore   Kukjin Kim
• [PATCH 5/5] ARM: EXYNOS: Support suspend and resume for EXYNOS5250   Kukjin Kim
• [PATCH v4 00/12] ARM: EXYNOS: add support new EXYNOS5250   Kukjin Kim
• [PATCH v4 01/12] ARM: EXYNOS: to declare static for mach-exynos/common.c   Kukjin Kim
• [PATCH v4 02/12] ARM: EXYNOS: use exynos_init_uarts() instead of exynos4_init_uarts()   Kukjin Kim
• [PATCH v4 03/12] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Kukjin Kim
• [PATCH v4 04/12] ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5   Kukjin Kim
• [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5   Kukjin Kim
• [PATCH v4 06/12] ARM: EXYNOS: add support for EXYNOS5250 SoC   Kukjin Kim
• [PATCH v4 07/12] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Kukjin Kim
• [PATCH v4 08/12] ARM: EXYNOS: support EINT for EXYNOS4 and EXYNOS5   Kukjin Kim
• [PATCH v4 09/12] ARM: EXYNOS: add support get_core_count() for EXYNOS5250   Kukjin Kim
• [PATCH v4 10/12] ARM: EXYNOS: add support ARCH_EXYNOS5 for EXYNOS5 SoCs   Kukjin Kim
• [PATCH v4 11/12] ARM: EXYNOS: add support device tree enabled board file for EXYNOS5   Kukjin Kim
• [PATCH v4 12/12] ARM: dts: add initial dts file for EXYNOS5250, SMDK5250   Kukjin Kim
• [PATCH v2 RE-SEND] [CPUFREQ] EXYNOS4X12: Add support cpufreq for EXYNOS4X12   Kukjin Kim
• [PATCH v2 RE-SEND] [CPUFREQ] EXYNOS5250: Add support cpufreq for EXYNOS5250   Kukjin Kim
• [PATCH v2 RE-SEND] [CPUFREQ] EXYNOS5250: Add support cpufreq for EXYNOS5250   Kukjin Kim
• [PATCH v4 11/12] ARM: EXYNOS: add support device tree enabled board file for EXYNOS5   Kukjin Kim
• [PATCH v4 00/12] ARM: EXYNOS: add support new EXYNOS5250   Kukjin Kim
• [GIT PULL] Samsung SoC EXYNOS5250 arch for v3.4   Kukjin Kim
• [GIT PULL] Samsung EXYNOS5250 GPIO for v3.4   Kukjin Kim
• [PATCH v12 2/3] ARM: EXYNOS: Change System MMU platform device definitions   Kukjin Kim
• [PATCH] Fixes after disintegration of asm/system.h for ARM   Kukjin Kim
• linux-next: manual merge of the arm-soc tree with the s5p tree   Kukjin Kim
• [GIT PULL] Samsung SoC EXYNOS5250 arch for v3.4   Kukjin Kim
• [PATCH v12 2/3] ARM: EXYNOS: Change System MMU platform device definitions   Kukjin Kim
• [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5   Kukjin Kim
• [PATCH][RESEND] ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LL   Kukjin Kim
• [PATCH] ARM: S3C24XX: fix missing common.h in mach-s3c24xx/   Kukjin Kim
• [CPUFREQ] Fix exposure of ARM_EXYNOS4210_CPUFREQ   Kukjin Kim
• [PATCH v12 2/3] ARM: EXYNOS: Change System MMU platform device definitions   Kukjin Kim
• [PATCH 1/4] ARM: Exynos: Use CHIP_ID to detect cpu type during decompression setup   Kukjin Kim
• [PATCH 3/4] ARM: Exynos5: Fix incorrect initialization of GIC   Kukjin Kim
• [PATCH 4/4] ARM: Exynos5: Add PDMA and MDMA physical base address defines   Kukjin Kim
• [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5   Kukjin Kim
• [PATCH v3 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support   Kukjin Kim
• [PATCH 1/2] ARM: fix builds due to missing <asm/system_misc.h> includes   Kukjin Kim
• error: 'SEGMENT_SIZE' undeclared with arm-eabi-gcc toolchain   Kukjin Kim
• [PATCH] ARM: S3C24XX: fix missing common.h in mach-s3c24xx/   Kukjin Kim
• [PATCH 4/6] ARM: OMAP: fix missing __devexit_p() annotations   Russell King
• [PATCH 6/6] ARM: OMAP: fix cpufreq build   Russell King
• [PATCH v2 4/5] Cortex-M3: Add base support for Cortex-M3   Uwe Kleine-König
• [PATCH v2 5/5] Cortex-M3: Add support for exception handling   Uwe Kleine-König
• [PATCH] ARM: davinci: DA850: move da850_register_pm to .init.text   Uwe Kleine-König
• [PATCH 2/3] led-triggers: use atomic kzalloc during led trigger registering   Uwe Kleine-König
• [PATCH] ARM: davinci: cpufreq: fix compiler warning   Uwe Kleine-König
• [PATCH v2 1/3] mfd: mc13xxx-core: Prepare for separate spi and i2c backends.   Uwe Kleine-König
• [PATCH 6/7] ARM: kirkwood: rtc-mv devicetree bindings   Uwe Kleine-König
• [PATCH v2 5/5] Cortex-M3: Add support for exception handling   Uwe Kleine-König
• [PATCH v3 0/5] ARM: Initial support for Cortex-M3   Uwe Kleine-König
• [PATCH v3 1/5] ARM: protect usage of cr_alignment by #ifdef CONFIG_CPU_CP15   Uwe Kleine-König
• [PATCH v3 2/5] ARM: Add a printk loglevel modifier   Uwe Kleine-König
• [PATCH v3 3/5] ARM: force branch instructions to use long distance encoding   Uwe Kleine-König
• [PATCH v3 4/5] Cortex-M3: Add base support for Cortex-M3   Uwe Kleine-König
• [PATCH v3 5/5] Cortex-M3: Add support for exception handling   Uwe Kleine-König
• [PATCH v3 1/5] ARM: protect usage of cr_alignment by #ifdef CONFIG_CPU_CP15   Uwe Kleine-König
• [PATCH v3 2/5] ARM: Add a printk loglevel modifier   Uwe Kleine-König
• [PATCH v3 1/5] ARM: protect usage of cr_alignment by #ifdef CONFIG_CPU_CP15   Uwe Kleine-König
• [PATCH] ARM: davinci: implement DEBUG_LL port choice   Uwe Kleine-König
• [PATCH] ARM: davinci: implement DEBUG_LL port choice   Uwe Kleine-König
• [PATCH v2] ARM: davinci: implement DEBUG_LL port choice   Uwe Kleine-König
• [PATCH] ARM: davinci: make all struct davinci_uart_config const and __initconst   Uwe Kleine-König
• Inconsistent kallsyms data on ARM.   Uwe Kleine-König
• [PATCH] ARM: imx/mx21ads: remove unneeded cast   Uwe Kleine-König
• [PATCH 03/17] ARM: mark const init data with __initconst instead of __initdata   Uwe Kleine-König
• [PATCH 14/17] media/video/s5p-tv: mark const init data with __initconst instead of __initdata   Uwe Kleine-König
• [PATCH 03/17] ARM: mark const init data with __initconst instead of __initdata   Uwe Kleine-König
• [PATCH v2 02/15] ARM: mark const init data with __initconst instead of __initdata   Uwe Kleine-König
• [PATCH v2 13/15] media/video/s5p-tv: mark const init data with __initconst instead of __initdata   Uwe Kleine-König
• [PATCH] ARM: davinci: mark spi_board_info arg to da8xx_register_spi as const   Uwe Kleine-König
• [PATCH] ARM: davinci/da850-evm: fix section mismatch   Uwe Kleine-König
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Lorenz Kolb
• [PATCH] omap3_beagle: Init only uart3 used for console   Koen Kooi
• [PATCH] omap3_beagle: Init only uart3 used for console   Koen Kooi
• [PATCH v6 1/2] mfd: Add anatop mfd driver   Peter Korsgaard
• [PATCH] arm: omap: add minimal support for Nokia RM-696   Aaro Koskinen
• [PATCH] ARM: iop: add missing includes   Aaro Koskinen
• [PATCH v6 0/2] patch set about the MXS-DMA   Vinod Koul
• [PATCH v3 2/2] dmaengine: Add support for multiple descriptors for imx-dma.   Vinod Koul
• [PATCH 01/14] dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c   Vinod Koul
• [PATCH 04/14] dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.   Vinod Koul
• [PATCH 01/14] dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c   Vinod Koul
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Vinod Koul
• [GIT PULL] merge PL330 DMAC driver   Vinod Koul
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Vinod Koul
• [PATCH v3 1/2] dmaengine: Add support for per xfer specific privatedata   Vinod Koul
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Vinod Koul
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Vinod Koul
• [PATCH v3 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   Vinod Koul
• [PATCH 1/6] dmaengine: Kconfig: fix Atmel at_hdmac entry   Vinod Koul
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Vinod Koul
• [PATCH v3 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   Vinod Koul
• [PATCH] dmaengine: at_hdmac: add slave config operation   Vinod Koul
• [PATCH v3 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   Vinod Koul
• [PATCH v5 1/2] dmaengine: Add context parameter to prep_dma_sg and prep_interleaved_dma   Vinod Koul
• [PATCH v5 2/2] DMAEngine: Add DMAEngine driver based on old MSM ADM DMA APIs   Vinod Koul
• [PATCH v5 1/2] dmaengine: Add context parameter to prep_dma_sg and prep_interleaved_dma   Vinod Koul
• [PATCH v5 2/2] DMAEngine: Add DMAEngine driver based on old MSM ADM DMA APIs   Vinod Koul
• [PATCHv3 4/4] ARM: OMAP3+: add prcm chain interrupts to the interrupt list   Tero Kristo
• [PATCHv3 4/6] ARM: OMAP3 PM: Enable IO Wake up   Tero Kristo
• [PATCHv3 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Tero Kristo
• [PATCHv3 4/4] ARM: OMAP3+: add prcm chain interrupts to the interrupt list   Tero Kristo
• [PATCHv3 4/6] ARM: OMAP3 PM: Enable IO Wake up   Tero Kristo
• [PATCHv4 0/6] ARM: OMAP3+: IO daisychain support fixes   Tero Kristo
• [PATCHv4 1/6] ARM: OMAP3 PM: correct enable/disable of daisy io chain   Tero Kristo
• [PATCHv4 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Tero Kristo
• [PATCHv4 3/6] ARM: OMAP4 PM: Add IO Daisychain support   Tero Kristo
• [PATCHv4 4/6] ARM: OMAP3+: PRM: Enable IO wake up   Tero Kristo
• [PATCHv4 5/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Tero Kristo
• [PATCHv4 6/6] ARM: OMAP3 PM: Remove IO Daisychain control from cpuidle   Tero Kristo
• [PATCH] ARM: OMAP2+: voltage: ensure voltage used is exact voltage from OPP table   Tero Kristo
• [PATCHv3 1/4] ARM: OMAP4: suspend: Program all domains to retention   Tero Kristo
• [PATCHv4 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Tero Kristo
• [PATCHv4 4/6] ARM: OMAP3+: PRM: Enable IO wake up   Tero Kristo
• [PATCHv4 5/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Tero Kristo
• [PATCHv3 1/4] ARM: OMAP4: suspend: Program all domains to retention   Tero Kristo
• [PATCHv3 1/4] ARM: OMAP4: suspend: Program all domains to retention   Tero Kristo
• [PATCHv4 4/6] ARM: OMAP3+: PRM: Enable IO wake up   Tero Kristo
• [PATCHv5 0/6] ARM: OMAP3+: IO daisy chain support fixes   Tero Kristo
• [PATCHv5 1/6] ARM: OMAP3 PM: correct enable/disable of daisy io chain   Tero Kristo
• [PATCHv5 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Tero Kristo
• [PATCHv5 3/6] ARM: OMAP4 PM: Add IO Daisychain support   Tero Kristo
• [PATCHv5 4/6] ARM: OMAP3+: PRM: Enable IO wake up   Tero Kristo
• [PATCHv5 5/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Tero Kristo
• [PATCHv5 6/6] ARM: OMAP3 PM: Remove IO Daisychain control from cpuidle   Tero Kristo
• [PATCHv5 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Tero Kristo
• [PATCHv5 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Tero Kristo
• [PATCHv5 0/6] ARM: OMAP3+: IO daisy chain support fixes   Tero Kristo
• [PATCH v3 1/2] arm: omap3: pm34xx.c: Fix omap3_pm_init() error out paths   Tero Kristo
• [PATCH] ARM: OMAP3+: fix oops triggered in omap_prcm_register_chain_handler   Tero Kristo
• [PATCH 8/8] ARM: tegra: HACK: remove set_irq_flags() from driver   Greg Kroah-Hartman
• [PATCH RESEND v3] USB: Support for LPC32xx SoC   Greg Kroah-Hartman
• [PATCH v4] USB: Support for LPC32xx SoC   Greg Kroah-Hartman
• [PATCH v4] USB: Support for LPC32xx SoC   Greg Kroah-Hartman
• [PATCH] serial: PL011: move interrupt clearing   Greg Kroah-Hartman
• [GIT PULL 3/5] First set of omap1 related changes   Janusz Krzysztofik
• [GIT PULL 3/5] First set of omap1 related changes   Janusz Krzysztofik
• [PATCH v3 0/3] Amstrad Delta: access MODEM_RESET GPIO pin over a regulator   Janusz Krzysztofik
• [PATCH v3 1/3] ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin   Janusz Krzysztofik
• [PATCH v3 2/3] ARM: OMAP1: ams-delta: update the modem to use regulator API   Janusz Krzysztofik
• [PATCH v3 3/3] ASoC: OMAP: ams-delta: drop .set_bias_level callback   Janusz Krzysztofik
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Janusz Krzysztofik
• [PATCH v7 1/3] Documentation: common clk API   Amit Kucheria
• [PATCH v8 0/8] Consolidate cpuidle functionality   Amit Kucheria
• [PATCH v8 4/8] ARM: davinci: Consolidate time keeping and irq enable   Amit Kucheria
• [PATCH 00/15] watchdog/mpcore: updates & fixes   Viresh Kumar
• [PATCH 01/15] watchdog/mpcore_wdt: Fix multiline comments   Viresh Kumar
• [PATCH 02/15] watchdog/mpcore_wdt: Add blank line after variable definitions in routines   Viresh Kumar
• [PATCH 03/15] watchdog/mpcore_wdt: Arrange #includes in alphabetical order   Viresh Kumar
• [PATCH 04/15] watchdog/mpcore_wdt: remove multiple 'ret = 0' statements from ioctl ops   Viresh Kumar
• [PATCH 05/15] watchdog/mpcore_wdt: Rename dev to pdev for pointing to struct platform_device   Viresh Kumar
• [PATCH 06/15] watchdog/mpcore_wdt: do request_irq before registering misc device   Viresh Kumar
• [PATCH 07/15] watchdog/mpcore_wdt: Use devm routines   Viresh Kumar
• [PATCH 08/15] watchdog/mpcore_wdt: handle module param mpcore_margin in probe   Viresh Kumar
• [PATCH 09/15] watchdog/mpcore_wdt: convert to use module_platform_driver()   Viresh Kumar
• [PATCH 10/15] watchdog/mpcore_wdt: Add support for dev_pm_ops interface   Viresh Kumar
• [PATCH 11/15] watchdog/mpcore_wdt: disable wdt in suspend only if it is busy   Viresh Kumar
• [PATCH 12/15] watchdog/mpcore_wdt: Add support for WDIOF_CARDRESET   Viresh Kumar
• [PATCH 13/15] watchdog/mpcore_wdt: Allow platform_get_irq() to fail   Viresh Kumar
• [PATCH 14/15] watchdog/mpcore_wdt: Add clock framework support   Viresh Kumar
• [PATCH 15/15] watchdog/mpcore_wdt: use correct clk_rate to program timeout   Viresh Kumar
• [PATCH V2 00/22] watchdog: ARM watchdogs: sp805 & mpcore updates & fixes   Viresh Kumar
• [PATCH V2 01/22] watchdog: Add is_wdt_active() routine   Viresh Kumar
• [PATCH V2 02/22] watchdog: Add support for WDIOC_GETTIMELEFT IOCTL in watchdog core   Viresh Kumar
• [PATCH V2 03/22] watchdog/mpcore_wdt: Rename dev to pdev for pointing to struct platform_device   Viresh Kumar
• [PATCH V2 04/22] watchdog/mpcore_wdt: Use devm routines   Viresh Kumar
• [PATCH V2 05/22] watchdog/mpcore_wdt: Allow platform_get_irq() to fail   Viresh Kumar
• [PATCH V2 06/22] watchdog/mpcore_wdt: convert to watchdog core   Viresh Kumar
• [PATCH V2 07/22] watchdog/mpcore_wdt: Fix multiline comments   Viresh Kumar
• [PATCH V2 08/22] watchdog/mpcore_wdt: Arrange #includes in alphabetical order   Viresh Kumar
• [PATCH V2 09/22] watchdog/mpcore_wdt: Set default heartbeat in probe instead of init   Viresh Kumar
• [PATCH V2 10/22] watchdog/mpcore_wdt: Use dev_(crit, err, info) instead of dev_printk   Viresh Kumar
• [PATCH V2 11/22] watchdog/mpcore_wdt: convert to use module_platform_driver()   Viresh Kumar
• [PATCH V2 12/22] watchdog/mpcore_wdt: Add support for dev_pm_ops interface   Viresh Kumar
• [PATCH V2 13/22] watchdog/mpcore_wdt: disable wdt in suspend only if it is busy   Viresh Kumar
• [PATCH V2 14/22] watchdog/mpcore_wdt: replace (__raw_)readl/writel with lighter *_relaxed variants   Viresh Kumar
• [PATCH V2 15/22] watchdog/mpcore_wdt: Add support for WDIOC_GETBOOTSTATUS IOCTL   Viresh Kumar
• [PATCH V2 16/22] watchdog/mpcore_wdt: Add clock framework support   Viresh Kumar
• [PATCH V2 17/22] watchdog/mpcore_wdt: use correct clk_rate to program timeout   Viresh Kumar
• [PATCH V2 18/22] watchdog/sp805: Fix documentation style comment   Viresh Kumar
• [PATCH V2 19/22] watchdog/sp805: replace readl/writel with lighter _relaxed variants   Viresh Kumar
• [PATCH V2 20/22] watchdog/sp805: Use devm routines   Viresh Kumar
• [PATCH V2 21/22] watchdog/sp805: convert to watchdog core   Viresh Kumar
• [PATCH V2 22/22] watchdog/sp805: Add clk_{un}prepare support   Viresh Kumar
• [PATCH 3/4] ARM: create a common IOMEM definition   Viresh Kumar
• [PATCH] AMBA: Add module_amba_driver() helper macro for amba_driver   Viresh Kumar
• [PATCH] MAINTAINERS: Update ST's Mailing list for SPEAr   Viresh Kumar
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH v2] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH v2] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH v3] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH] watchdog/coh901327: convert to use watchdog core   Viresh Kumar
• [PATCH v3] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH v4] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH] ARM: SPEAr600: Change FSMC and SMI clock names   Viresh Kumar
• [PATCH 1/2] ARM: VIC: Create common infrastructure for vic DT bindings   Viresh Kumar
• [PATCH 2/2] ARM: GIC: Create common infrastructure for GIC DT bindings   Viresh Kumar
• [PATCH] SPEAr: Use CLKDEV_INIT for defining clk_lookups   Viresh Kumar
• [PATCH] SPEAr: Use CLKDEV_INIT for defining clk_lookups   Viresh Kumar
• [PATCH 0/5] SPEAr DT support updates   Viresh Kumar
• [PATCH 1/5] SPEAr6xx: Add compilation support for dtbs using 'make dtbs'   Viresh Kumar
• [PATCH 2/5] SPEAr3xx: Replace printk() with pr_*()   Viresh Kumar
• [PATCH 3/5] ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture   Viresh Kumar
• [PATCH 4/5] SPEAr: Add PL080 DMA support for 3xx and 6xx   Viresh Kumar
• [PATCH 5/5] SPEAr: Update defconfigs   Viresh Kumar
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Viresh Kumar
• [PATCH V2 0/7] SPEAr DT support updates   Viresh Kumar
• [PATCH V2 1/7] SPEAr: Use CLKDEV_INIT for defining clk_lookups   Viresh Kumar
• [PATCH V2 2/7] SPEAr3xx: Add clock instance of usb hosts - ehci and ohci 0 and 1   Viresh Kumar
• [PATCH V2 3/7] SPEAr6xx: Add compilation support for dtbs using 'make dtbs'   Viresh Kumar
• [PATCH V2 4/7] SPEAr3xx: Replace printk() with pr_*()   Viresh Kumar
• [PATCH V2 5/7] ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture   Viresh Kumar
• [PATCH V2 6/7] SPEAr: Add PL080 DMA support for 3xx and 6xx   Viresh Kumar
• [PATCH V2 7/7] SPEAr: Update defconfigs   Viresh Kumar
• [PATCH] watchdog: sp805: call watchdog_set_drvdata() early   Viresh Kumar
• [PATCH V2 5/7] ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture   Viresh Kumar
• [PATCH V3 0/7] SPEAr DT support updates   Viresh Kumar
• [PATCH V3 1/7] SPEAr: Use CLKDEV_INIT for defining clk_lookups   Viresh Kumar
• [PATCH V3 2/7] SPEAr3xx: Add clock instance of usb hosts - ehci and ohci 0 and 1   Viresh Kumar
• [PATCH V3 3/7] SPEAr6xx: Add compilation support for dtbs using 'make dtbs'   Viresh Kumar
• [PATCH V3 4/7] SPEAr3xx: Replace printk() with pr_*()   Viresh Kumar
• [PATCH V3 5/7] ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture   Viresh Kumar
• [PATCH V3 6/7] SPEAr: Add PL080 DMA support for 3xx and 6xx   Viresh Kumar
• [PATCH V3 7/7] SPEAr: Update defconfigs   Viresh Kumar
• [PATCH V2 5/7] ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture   Viresh Kumar
• [RFC] pinctrl: Replace list_groups() with get_groups_count()   Viresh Kumar
• [RFC] pinctrl: Replace list_groups() with get_groups_count()   Viresh Kumar
• [RFC] pinctrl: Replace list_groups() with get_groups_count()   Viresh Kumar
• [PATCH] pinctrl: Replace list_*() with get_*_count()   Viresh Kumar
• [PATCH v3 6/6] mmc: sdhci-s3c: Add device tree support   Viresh Kumar
• [PATCHv2 10/14] Hexagon: adapt for dma_map_ops changes   Richard Kuo
• [PATCH v11 0/3] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Cho KyongHo
• [PATCH v11 1/3] S5P: SYSMMU: Remove System MMU device driver   Cho KyongHo
• [PATCH v11 2/3] ARM: EXYNOS: Change System MMU platform device definitions   Cho KyongHo
• [PATCH v11 3/3] iommu/exynos: Add iommu driver for Exynos Platforms   Cho KyongHo
• [PATCH v12 0/3] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Cho KyongHo
• [PATCH v12 1/3] S5P: SYSMMU: Remove System MMU device driver   Cho KyongHo
• [PATCH v12 2/3] ARM: EXYNOS: Change System MMU platform device definitions   Cho KyongHo
• [PATCH v12 3/3] iommu/exynos: Add iommu driver for Exynos Platforms   Cho KyongHo
• arm: mm: fix faulty calculation of area to perform cache operation   Cho KyongHo
• [PATCH 2/7] drivers/scsi/arm/{cumana_2, eesox, powertec}.c: ensure arguments to request_irq and free_irq are compatible   Julia Lawall
• [PATCH] MAINTAINERS: add entry for exynos mipi display drivers   Donghwa Lee
• [RFC PATCH] video:backlight: add dimming sysfs node   Donghwa Lee
• [RFC PATCH] video:backlight: add dimming sysfs node   Donghwa Lee
• [PATCH v7 1/9] cpuidle: Add common time keeping and irq enabling   Rob Lee
• [PATCH v7 0/9] Consolidate cpuidle functionality   Rob Lee
• [PATCH V6 1/5] ARM: exynos: Add support AFTR mode on EXYNOS4210   Rob Lee
• linux-next: manual merge of the cpuidle-cons tree with the arm-soc tree   Rob Lee
• linux-next: manual merge of the cpuidle-cons tree with the arm-soc tree   Rob Lee
• [git pull] Consolidate cpuidle functionality   Rob Lee
• linux-next: manual merge of the cpuidle-cons tree with the arm-soc tree   Rob Lee
• [PATCH v8 0/8] Consolidate cpuidle functionality   Rob Lee
• [PATCH v8 4/8] ARM: davinci: Consolidate time keeping and irq enable   Rob Lee
• [PATCH v8 4/8] ARM: davinci: Consolidate time keeping and irq enable   Rob Lee
• [RFC PATCH] cpuidle: avoid unnecessary expensive governor processing   Robert Lee
• [PATCH v8 0/8] Consolidate cpuidle functionality   Robert Lee
• [PATCH v8 1/8] cpuidle: Add common time keeping and irq enabling   Robert Lee
• [PATCH v8 2/8] ARM: at91: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v8 3/8] ARM: kirkwood: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v8 4/8] ARM: davinci: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v8 5/8] ARM: omap: Consolidate OMAP3 time keeping and irq enable   Robert Lee
• [PATCH v8 6/8] ARM: omap: Consolidate OMAP4 time keeping and irq enable   Robert Lee
• [PATCH v8 7/8] ARM: shmobile: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v8 8/8] SH: shmobile: Consolidate time keeping and irq enable   Robert Lee
• [PATCH] ARM: davinci: Fix for cpuidle consolidation changes   Robert Lee
• oprofile and ARM A9 hardware counter   Ming Lei
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Ming Lei
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Ming Lei
• [PATCH] ARM: OMAP3+: fix oops triggered in omap_prcm_register_chain_handler   Ming Lei
• [PATCH] ARM: OMAP3+: fix oops triggered in omap_prcm_register_chain_handler(v1)   Ming Lei
• [PATCH] ARM: OMAP3+: fix oops triggered in omap_prcm_register_chain_handler   Ming Lei
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Ming Lei
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Ming Lei
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Ming Lei
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Ming Lei
• [PATCH] mach-kirkwood: Support for DLink DNS-320 & DNS-325 NAS   Jamie Lentin
• [PATCH 0/2] Add support for DNS-320 and DNS-325 using devicetree   Jamie Lentin
• [PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Jamie Lentin
• [PATCH 2/2] ARM: kirkwood: Convert orion-nand to fdt   Jamie Lentin
• [PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Jamie Lentin
• [PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Jamie Lentin
• [PATCH V2 0/3] Add support for DNS-320 and DNS-325 using devicetree   Jamie Lentin
• [PATCH V2 1/3] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Jamie Lentin
• [PATCH V2 2/3] ARM: kirkwood: Convert orion-nand to fdt   Jamie Lentin
• [PATCH V2 3/3] ARM: kirkwood: Define NAND partitions in dts   Jamie Lentin
• [PATCH V3 2/3] ARM: kirkwood: Convert orion-nand to fdt   Jamie Lentin
• [PATCH V2 3/3] ARM: kirkwood: Define NAND partitions in dts   Jamie Lentin
• [PATCH V3 0/5] Add support for DNS-320 and DNS-325 using devicetree   Jamie Lentin
• [PATCH V3 1/5] ARM: kirkwood: Basic support for DNS-320 and DNS-325   Jamie Lentin
• [PATCH V3 2/5] mtd: Add orion_nand devicetree bindings   Jamie Lentin
• [PATCH V3 3/5] ARM: kirkwood: Allow nand to be configured via. devicetree   Jamie Lentin
• [PATCH V3 4/5] ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt   Jamie Lentin
• [PATCH V3 5/5] mtd: Move fdt partition documentation to a seperate file   Jamie Lentin
• [PATCH V4 0/3] ARM: Kirkwood: Convert DNS-325 & DNS-320 to access nand via devicetree (was: Add support for DNS-320 and DNS-325 using devicetree)   Jamie Lentin
• [PATCH V4 1/3] mtd: Add orion_nand devicetree bindings   Jamie Lentin
• [PATCH V4 2/3] kirkwood: Allow nand to be configured via. devicetree   Jamie Lentin
• [PATCH V4 3/3] ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt   Jamie Lentin
• [PATCH 1/5 v3] i2c/gpio: add DT support   Karol Lewandowski
• [PATCH v4 2/2] regulator: add device tree support for max8997   Karol Lewandowski
• [PATCH 1/5] mfd : ux500 - Cleanup duplicate definitions   Daniel Lezcano
• [PATCH v7 0/9] Consolidate cpuidle functionality   Daniel Lezcano
• linux-next: manual merge of the cpuidle-cons tree with the arm-soc tree   Daniel Lezcano
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Daniel Lezcano
• [RFC][PATCH 1/7] ARM: OMAP4: cpuidle - Remove unused valid field   Daniel Lezcano
• [RFC][PATCH 2/7] ARM: OMAP4: cpuidle - Declare the states with the driver declaration   Daniel Lezcano
• [RFC][PATCH 3/7] ARM: OMAP4: cpuidle - Remove the cpuidle_params_table table   Daniel Lezcano
• [RFC][PATCH 4/7] ARM: OMAP4: cpuidle - fix static omap4_idle_data declaration   Daniel Lezcano
• [RFC][PATCH 5/7] ARM: OMAP4: cpuidle - Initialize omap4_idle_data at compile time   Daniel Lezcano
• [RFC][PATCH 6/7] ARM: OMAP4: cpuidle - use the omap4_idle_data variable directly   Daniel Lezcano
• [RFC][PATCH 7/7] ARM: OMAP4: cpuidle - remove omap4_idle_data initialization at boot time   Daniel Lezcano
• [RFC][PATCH 1/7] ARM: OMAP4: cpuidle - Remove unused valid field   Daniel Lezcano
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Daniel Lezcano
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Daniel Lezcano
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Daniel Lezcano
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Daniel Lezcano
• [RFC][PATCH 2/7] ARM: OMAP4: cpuidle - Declare the states with the driver declaration   Daniel Lezcano
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Daniel Lezcano
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Daniel Lezcano
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Daniel Lezcano
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Daniel Lezcano
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Daniel Lezcano
• [RFC][PATCH 1/9] ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table   Daniel Lezcano
• [RFC][PATCH 2/9] ARM: OMAP3: cpuidle - remove next_valid_state function   Daniel Lezcano
• [RFC][PATCH 3/9] ARM: OMAP3: cpuidle - set enable_off_mode as static   Daniel Lezcano
• [RFC][PATCH 4/9] ARM: OMAP3: define cpuidle statically   Daniel Lezcano
• [RFC][PATCH 5/9] ARM: OMAP3: cpuidle - remove the 'valid' field   Daniel Lezcano
• [RFC][PATCH 6/9] ARM: OMAP3: cpuidle - remove cpuidle_params_table   Daniel Lezcano
• [RFC][PATCH 7/9] ARM: OMAP3: define statically the omap3_idle_data   Daniel Lezcano
• [RFC][PATCH 8/9] ARM: OMAP3: cpuidle - use omap3_idle_data directly   Daniel Lezcano
• [RFC][PATCH 9/9] ARM: OMAP3/4: consolidate cpuidle Makefile   Daniel Lezcano
• [RFC][PATCH 3/9] ARM: OMAP3: cpuidle - set enable_off_mode as static   Daniel Lezcano
• [RFC][PATCH 4/9] ARM: OMAP3: define cpuidle statically   Daniel Lezcano
• I.MX35 PDK   Guennadi Liakhovetski
• [PATCH 2/4] ARM: kirkwood: fdt: absorb kirkwood_init()   Grant Likely
• [PATCH 3/4] ARM: kirkwood: convert rtc-mv to fdt.   Grant Likely
• [PATCH 4/4] ARM: kirkwood: convert orion-wdt to fdt.   Grant Likely
• [PATCH 1/8] ARM: tegra: export tegra_gpio_{en,dis}able   Grant Likely
• linux-next: manual merge of the arm-soc tree with the gpio tree   Grant Likely
• [PATCH 1/4] gpiolib: Add gpiochip_find_by_name() and gpio_find_by_chip_name()   Grant Likely
• [PATCH 1/4] gpiolib: Add gpiochip_find_by_name() and gpio_find_by_chip_name()   Grant Likely
• [PATCH] Initial Device Tree system for Snowball   Grant Likely
• [PATCH 1/3 v3] spi: move master of_node init to spi_alloc_master   Grant Likely
• [PATCH 2/3 v3] of_spi: add generic binding support to specify ncs gpio   Grant Likely
• [PATCH 3/3] spi/atmel: add DT support   Grant Likely
• [RFC PATCH] of: DMA helpers: manage generic requests specification   Grant Likely
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Grant Likely
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Grant Likely
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Grant Likely
• [PATCH 1/1] of: add dma-mask binding   Grant Likely
• [PATCH 1/4] gpiolib: Add gpiochip_find_by_name() and gpio_find_by_chip_name()   Grant Likely
• [PULL] of nand generic binding   Grant Likely
• [PATCH 1/1] of: introduce helper to manage boolean   Grant Likely
• [PATCH 01/14] ARM: orion: spi: remove enable_clock_fix which is not used   Grant Likely
• [PATCH 00/11] ARM: tegra: Add PCIe device tree support   Grant Likely
• [PATCH 05/11] tps6586x: Add device-tree support   Grant Likely
• [PATCH 2/5 v3] ARM: at91: sam9g20 add i2c DT support   Grant Likely
• [PATCH 4/4] misc: emif: add device tree support to emif driver   Grant Likely
• [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree   Grant Likely
• [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data   Grant Likely
• [PATCH 1/4 v4] of_spi: add generic binding support to specify cs gpio   Grant Likely
• [PATCH v2 1/7] serial: pxa: add OF support   Grant Likely
• [PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data   Grant Likely
• [PATCH 1/1] of: introduce helper to manage boolean   Grant Likely
• Subject: [PATCH] MAINTAINERS: add maintainer entry for SAMSUNG EXYNOS DeviceTree   Grant Likely
• [GIT PULL] ARM: OMAP: GPIO cleanup and device tree adaptation   Grant Likely
• [PATCH 6/6] spi/s3c64xx: Allow usage for ARCH_S3C24XX   Grant Likely
• [PATCH 1/4 v5] of_spi: add generic binding support to specify cs gpio   Grant Likely
• [PATCH 1/4 v5] of_spi: add generic binding support to specify cs gpio   Grant Likely
• [PATCH] gpio/omap: fix wakeups on level-triggered GPIOs   Grant Likely
• [PATCH v2 3/3] gpio/samsung: use ioremap() for EXYNOS4 GPIOlib   Grant Likely
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Grant Likely
• [PATCH] gpio/mxs: support irqs triggered by both edges   Grant Likely
• [PATCH RESEND v3 2/2] GPIO: LPC32xx: Add output reading to GPO P3   Grant Likely
• [PATCH RESEND v3 1/2] GPIO: LPC32xx: Fix missing bit selection mask   Grant Likely
• [PATCH] gpio/mxs: support irqs triggered by both edges   Grant Likely
• [PATCH V2 1/3] Documentation/gpio.txt: Explain expected pinctrl interaction   Grant Likely
• [PATCH 4/8] ARM: OMAP1: Move 16xx GPIO system clock to platform init code   Grant Likely
• [PATCH 0/6] gpio/omap: Some more driver cleanup and fixes   Grant Likely
• [PATCH] gpio/omap: Fix section warning for omap_mpuio_alloc_gc()   Grant Likely
• [PATCH 08/12] gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support   Grant Likely
• [PATCH 09/12] gpio/twl: Add DT support to gpio-twl4030 driver   Grant Likely
• [PATCH 0/6] gpio/omap: Some more driver cleanup and fixes   Grant Likely
• [PATCH v3 1/2] mfd: add irq domain support for max8997 interrupts   Grant Likely
• [PATCH v3 2/2] regulator: add device tree support for max8997   Grant Likely
• [PATCH v4 2/2] ARM: Exynos: Add device tree support for interrupt combiner   Grant Likely
• [PATCH v3 00/13] gpio/omap: Some more driver cleanup and fixes   Grant Likely
• [PATCH 1/1] of: introduce helper to manage boolean   Grant Likely
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Grant Likely
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Grant Likely
• [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support   Grant Likely
• [PATCH v3 2/2] regulator: add device tree support for max8997   Grant Likely
• [PULL] generic irq chip and pl061 irqdomain support   Grant Likely
• [GIT PULL] imx irq_domain migration   Grant Likely
• [PATCH v4] of: introduce helper to manage boolean   Grant Likely
• [PATCH] of: Add generic device tree DMA helpers   Grant Likely
• [PATCH] of: Add generic device tree DMA helpers   Grant Likely
• [PATCH] of: Add generic device tree DMA helpers   Grant Likely
• [PATCH] of: Add generic device tree DMA helpers   Grant Likely
• [PATCH] of: Add generic device tree DMA helpers   Grant Likely
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Grant Likely
• [PATCH] of: Add generic device tree DMA helpers   Grant Likely
• [PATCH v2 4/4] misc: emif: add device tree support to emif driver   Grant Likely
• [PATCH 4/4] misc: emif: add device tree support to emif driver   Grant Likely
• [PATCH] of: Add generic device tree DMA helpers   Grant Likely
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Grant Likely
• [PATCH] gpio: tegra: tegra_gpio_config shouldn't be __init   Grant Likely
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Grant Likely
• [PATCH 2/2] of: selftest/dma: Add selftest for new DT DMA request helpers   Grant Likely
• [PATCH 01/11] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH v4 RESEND 0/7] gpio/omap: Some more driver fixes   Grant Likely
• [PATCH v4 RESEND 0/7] gpio/omap: Some more driver fixes   Grant Likely
• [GIT PULL] gpio/omap: more fixes for v3.4   Grant Likely
• [PATCH v2 1/1] ARM: imx28: add basic dt support   Grant Likely
• [PATCH 4/4] arm: at91: dt: sam9g25ek add mci support   Grant Likely
• Handling device shared SFR on dt platform   Grant Likely
• [PATCH V3 2/5] mtd: Add orion_nand devicetree bindings   Grant Likely
• [PATCH V3 5/5] mtd: Move fdt partition documentation to a seperate file   Grant Likely
• [PATCH] serial: PL011: move interrupt clearing   Grant Likely
• [PATCH v4 1/2] mfd: add irq domain support for max8997 interrupts   Grant Likely
• [PATCH v4 2/2] regulator: add device tree support for max8997   Grant Likely
• [PATCH v10] Regulator: Add Anatop regulator driver   Axel Lin
• [PATCH v10] Regulator: Add Anatop regulator driver   Axel Lin
• [PATCH v11] Regulator: Add Anatop regulator driver   Axel Lin
• Randconfig module build error with OMAP4_ERRATA_I688   Tony Lindgren
• [PATCH 0/2] Few more omap DT patches for next merge window   Tony Lindgren
• [PATCH 1/2] ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2+: Remove extra ifdefs for board-generic   Tony Lindgren
• [PATCH 0/4] Start getting rid of pdata callbacks with gpio_find_by_chip_name()   Tony Lindgren
• [PATCH 1/4] gpiolib: Add gpiochip_find_by_name() and gpio_find_by_chip_name()   Tony Lindgren
• [PATCH 2/4] mmc: omap_hsmmc: Use gpio_find_by_chip_name() for omap_hsmmc_gpio_init()   Tony Lindgren
• [PATCH 3/4] mmc: omap_hsmmc: Use GPIO offset for external GPIO chips   Tony Lindgren
• [PATCH 4/4] mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect   Tony Lindgren
• [PATCH 5/6] ARM: OMAP3: Modify omap_hsmmc_late_init to handle deleting mmc devices   Tony Lindgren
• linux-next: manual merge of the arm-soc tree with the gpio tree   Tony Lindgren
• [GIT PULL 3/5] First set of omap1 related changes   Tony Lindgren
• [PATCH] ARM: OMAP: hsmmc: add max_freq field   Tony Lindgren
• [PATCH 1/4] gpiolib: Add gpiochip_find_by_name() and gpio_find_by_chip_name()   Tony Lindgren
• [PATCH 2/4] mmc: omap_hsmmc: Use gpio_find_by_chip_name() for omap_hsmmc_gpio_init()   Tony Lindgren
• [PATCH 2/4] mmc: omap_hsmmc: Use gpio_find_by_chip_name() for omap_hsmmc_gpio_init()   Tony Lindgren
• [PATCH 3/4] mmc: omap_hsmmc: Use GPIO offset for external GPIO chips   Tony Lindgren
• [PATCH 4/4] mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect   Tony Lindgren
• [PATCH 0/4] Start getting rid of pdata callbacks with gpio_find_by_chip_name()   Tony Lindgren
• Randconfig module build error with OMAP4_ERRATA_I688   Tony Lindgren
• [PATCH 1/4] gpiolib: Add gpiochip_find_by_name() and gpio_find_by_chip_name()   Tony Lindgren
• [PATCH 2/4] mmc: omap_hsmmc: Use gpio_find_by_chip_name() for omap_hsmmc_gpio_init()   Tony Lindgren
• [PATCH 1/4] gpiolib: Add gpiochip_find_by_name() and gpio_find_by_chip_name()   Tony Lindgren
• [PATCH 11/12] mfd: twl4030-irq: Return twl6030_mmc_card_detect IRQ for board setup   Tony Lindgren
• [PATCH 11/12] mfd: twl4030-irq: Return twl6030_mmc_card_detect IRQ for board setup   Tony Lindgren
• [PATCH] Linux OMAP: Add omap_reserve functionality   Tony Lindgren
• [PATCH v3 1/2] ARM: OMAP: move generic EMAC init to separate file   Tony Lindgren
• [PATCH] RM: OMAP4: board-4430sdp: don't initialize value that is never used   Tony Lindgren
• [PATCH] ARM: omap: pandora: add support for backlight and poweroff   Tony Lindgren
• [PATCH RESEND] ARM: OMAP: enable Bluetooth on the PandaBoard   Tony Lindgren
• [PATCH] arm: omap: add minimal support for Nokia RM-696   Tony Lindgren
• [PATCH] ARM: OMAP4: Add support for Variscite OMAP4460 System-On-Module   Tony Lindgren
• [PATCH v3 1/3] ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin   Tony Lindgren
• [PATCH v2] ARM: OMAP: dmtimer: fix missing content/correction in low-power mode support   Tony Lindgren
• [PATCH] ARM: omap: pandora: fix usbhs platform data   Tony Lindgren
• [PATCH] plat-omap: mcbsp: Configure wakeup in later phase   Tony Lindgren
• [PATCH V3 1/2] mcx: very basic support for HTKW mcx board   Tony Lindgren
• [PATCH V3 2/2] mcx: support for HTKW mcx board   Tony Lindgren
• [PATCH] omap3_beagle: Init only uart3 used for console   Tony Lindgren
• [PATCH] ARM: OMAP2+: omap_device: call all suspend, resume callbacks when OMAP_DEVICE_NO_IDLE_ON_SUSPEND is set   Tony Lindgren
• [PATCH V3 1/2] mcx: very basic support for HTKW mcx board   Tony Lindgren
• [PATCH V2] mt_ventoux: support for TeeJet Mt.Ventoux board   Tony Lindgren
• [PATCH] ARM: OMAP2+: GPMC: Export gpmc_enable_hwecc and gpmc_calculate_ecc   Tony Lindgren
• [PATCH] arch/arm/plat-omap/clock.c: included linux/debugfs.h twice   Tony Lindgren
• [PATCH] arch/arm/mach-omap2/: included some headers twice   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688   Tony Lindgren
• [PATCH] ARM: OMAP: don't build hwspinlock in vain   Tony Lindgren
• [PATCH 1/3] arm: anticipate build breakages due in pending merge   Tony Lindgren
• [PATCH 2/3] arm: fix compile error in mach-omap2/board-omap4panda.c   Tony Lindgren
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Tony Lindgren
• [PATCH 2/3] ARM: OMAP2/3: Add idle_st bits for ST_32KSYNC timer to prcm-common header   Tony Lindgren
• [PATCH 0/3] ARM: OMAP1/2+: 32k-timer: Add hwmod lookup for 32k-timer   Tony Lindgren
• [PATCH] GPMC: add ECC control definitions   Tony Lindgren
• [PATCH 2/2] omap: build am3517crane board support by default   Tony Lindgren
• [PATCH v2 1/2] ARM: OMAP2+: id: Add am33xx SoC type detection   Tony Lindgren
• [PATCH v2 2/2] ARM: OMAP: sram: Add am33xx SRAM support (minimal)   Tony Lindgren
• [PATCH] mmc: omap_hsmmc: Fix Unbalanced pm_runtime_enable warning   Tony Lindgren
• [PATCH] ARM: OMAP1: Fix section mismatch for omap1_init_early()   Tony Lindgren
• [PATCH] ARM: OMAP2: Fix section warning for n8x0 when CONFIG_MMC_OMAP is not set   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix omap24xx_io_desc warning if SoC subtypes are not selected   Tony Lindgren
• [PATCH] gpio/omap: Fix section warning for omap_mpuio_alloc_gc()   Tony Lindgren
• [PATCH] ARM: OMAP: WiLink platform data for the PandaBoard   Tony Lindgren
• [PATCH] omap3_beagle: init uart2 for beagle rev AX/BX only   Tony Lindgren
• [PATCH V2] OMAP3+: PM: VP: fix integer truncation error   Tony Lindgren
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance   Tony Lindgren
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance   Tony Lindgren
• Latest OMAP4 build errors   Tony Lindgren
• [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Tony Lindgren
• [PATCH 4/4] mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect   Tony Lindgren
• Pre-merge-window status of the arm-soc tree   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix build issues with missing include of linux/bug.h   Tony Lindgren
• Latest OMAP4 build errors   Tony Lindgren
• [GIT PULL] Urgent pre-emptive fixes for next merge window   Tony Lindgren
• [GIT PULL] Urgent pre-emptive fixes for next merge window   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix build issues with missing include of linux/bug.h   Tony Lindgren
• [PATCH v2] ARM: OMAP2+: Fix build issues with missing include of linux/bug.h   Tony Lindgren
• [PATCH v2] ARM: OMAP2+: Fix build issues with missing include of linux/bug.h   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: PM: core support for SMPS regulators for v3.4   Tony Lindgren
• Latest OMAP4 build errors   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix section warnings for hsmmc_init_one   Tony Lindgren
• [GIT PULL] few more fixes for v3.3-rc6   Tony Lindgren
• [GIT PULL] few more fixes for v3.3-rc6   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix build for omap4 only builds with missing include of linux/bug.h   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix compile error when FB_OMAP2 is not set   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix compile error when FB_OMAP2 is not set   Tony Lindgren
• [GIT PULL 2/7] omap1 ams-delta clean-up   Tony Lindgren
• [GIT PULL 3/7] PM clean-up for the upcoming merge window   Tony Lindgren
• [GIT PULL 4/7] tiny uart clean-up for upcoming merge window   Tony Lindgren
• [GIT PULL 5/7] more DT changes for upcoming merge window   Tony Lindgren
• [GIT PULL 6/7] smartreflex fixes and clean-up for upcoming merge window   Tony Lindgren
• [GIT PULL 7/7] minimal omap board updates for upcoming merge window   Tony Lindgren
• [GIT PULL 1/7] non-critical fixes part3 for upcoming merge window   Tony Lindgren
• [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Tony Lindgren
• [PATCH v2 1/3] ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configuration   Tony Lindgren
• [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: PM: core support for SMPS regulators for v3.4   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: hwmod data: cleanup in preparation for link array removal   Tony Lindgren
• [PATCH 1/4] gpiolib: Add gpiochip_find_by_name() and gpio_find_by_chip_name()   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: hwmod data: cleanup in preparation for link array removal   Tony Lindgren
• [PATCH] ARM: OMAP4: clock: Add aliases for McBSP fclk clocks   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix compile error when FB_OMAP2 is not set   Tony Lindgren
• [PATCH v2] ARM: OMAP: WiLink platform data for the PandaBoard   Tony Lindgren
• [PATCH 1/2] ARM: OMAP: Remove CONFIG_OMAP_MCBSP references   Tony Lindgren
• [PATCH 4/8] ARM: OMAP1: Move 16xx GPIO system clock to platform init code   Tony Lindgren
• [PATCH 12/12] ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files   Tony Lindgren
• [PATCH 3/4] ARM: create a common IOMEM definition   Tony Lindgren
• [PATCH 0/6] ARM: OMAP3+: smartreflex: add class support   Tony Lindgren
• [GIT PULL] one kernel panic fix for v3.3-rc7   Tony Lindgren
• [GIT PULL 1/7] non-critical fixes part3 for upcoming merge window   Tony Lindgren
• [GIT PULL 1/7] non-critical fixes part3 for upcoming merge window   Tony Lindgren
• [PATCH 01/12] mfd: twl-core: don't depend on pdata->irq_base/end   Tony Lindgren
• [GIT PULL] ARM: OMAP: i2c, gpio, spi and regulator DTS updates   Tony Lindgren
• [GIT PULL] ARM: OMAP: i2c, gpio, spi and regulator DTS updates   Tony Lindgren
• [GIT PULL] ARM: OMAP: i2c, gpio, spi, regulator and mmc DTS updates   Tony Lindgren
• [PATCH 5/6] ARM: OMAP2+: I2C: always compile I2C reset code, even if I2C driver is not built   Tony Lindgren
• [PATCH 4/6] ARM: OMAP: fix missing __devexit_p() annotations   Tony Lindgren
• [PATCH 02/10] ARM: OMAP2+: SmartReflex: move the platform specific macros in plat-omap   Tony Lindgren
• [PATCH 1/2] ARM: OMAP: powerdomain: Wait for powerdomain transition in pwrdm_state_switch()   Tony Lindgren
• [PATCH 1/2] ARM: OMAP: powerdomain: Wait for powerdomain transition in pwrdm_state_switch()   Tony Lindgren
• [PATCH 1/2] ARM: OMAP: powerdomain: Wait for powerdomain transition in pwrdm_state_switch()   Tony Lindgren
• [PATCH v2 7/7] ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init   Tony Lindgren
• [PATCH v2 0/4] ARM: OMAP: boards: changes to support dynamic irq alloc   Tony Lindgren
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance   Tony Lindgren
• [PATCH v2 0/4] ARM: OMAP: boards: changes to support dynamic irq alloc   Tony Lindgren
• [PATCH v2 0/4] ARM: OMAP: boards: changes to support dynamic irq alloc   Tony Lindgren
• [PATCH v2 3/4] drivers: input: Fix OMAP_GPIO_IRQ with gpio_to_irq() in ams_delta_serio_exit()   Tony Lindgren
• [PATCH v2 7/7] ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init   Tony Lindgren
• [GIT PULL] omap fixes for merge window   Tony Lindgren
• [PATCH v7 1/3] Documentation: common clk API   Tony Lindgren
• [PATCH 4/9] ARM: omap2+: fix building without i2c   Tony Lindgren
• [PATCH 7/9] omap2plus: ensure that one of omap2/3/4 is selected   Tony Lindgren
• [PATCH 3/9] ARM: omap2/n8x0: work around modular omap mmc   Tony Lindgren
• [PATCH 7/9] omap2plus: ensure that one of omap2/3/4 is selected   Tony Lindgren
• [PATCH 9/9] ARM: omap: select CPU_FREQ_TABLE where needed   Tony Lindgren
• [PATCH 2/9] omap: fix visibility of omap2_mbox_iva_priv   Tony Lindgren
• [PATCH 5/9] tty/serial/omap: console can only be built-in   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: PM: core support for SMPS regulators for v3.4   Tony Lindgren
• [PATCH 05/12] Add dummy smsc911x regulators to cm-t35.   Tony Lindgren
• [PATCH 05/12] Add dummy smsc911x regulators to cm-t35.   Tony Lindgren
• [GIT PULL] omap fixes for merge window   Tony Lindgren
• [PATCH] omap2+: pm: fix compilation break.   Tony Lindgren
• [PATCH 2/5] arm: Use the plat_nand default partition parser   Tony Lindgren
• [PATCH v3 0/4] ARM: OMAP: boards: changes to support dynamic irq alloc   Tony Lindgren
• [PATCH] omap2+: pm: fix compilation break.   Tony Lindgren
• [PATCH 0/9] omap randconfig fixes for v3.3   Tony Lindgren
• [GIT PULL] omap fixes for merge window   Tony Lindgren
• [PATCH 03/17] ARM: mark const init data with __initconst instead of __initdata   Tony Lindgren
• [PATCHv3 4/4] ARM: OMAP3+: add prcm chain interrupts to the interrupt list   Russell King - ARM Linux
• [PATCH 2/8] serial: pxa: add OF support   Russell King - ARM Linux
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Russell King - ARM Linux
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Russell King - ARM Linux
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Russell King - ARM Linux
• [RFC PATCH 0/2] ARM: assembler: Add uniform assembler framework   Russell King - ARM Linux
• [PATCH 1/4] x86: add NO_IRQ macro   Russell King - ARM Linux
• [PATCH v2 19/28] ARM: Add fixed PCI i/o mapping   Russell King - ARM Linux
• [PATCH 1/4] x86: add NO_IRQ macro   Russell King - ARM Linux
• [PATCH 5/8] ARM: tegra: work around tegra THUMB2_KERNEL bug   Russell King - ARM Linux
• [PATCH 8/8] ARM: tegra: HACK: remove set_irq_flags() from driver   Russell King - ARM Linux
• [PATCH 8/8] ARM: tegra: HACK: remove set_irq_flags() from driver   Russell King - ARM Linux
• [PATCH 5/5 v2] ARM: kirkwood: convert orion-wdt to fdt.   Russell King - ARM Linux
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Russell King - ARM Linux
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Russell King - ARM Linux
• [PATCH] ARM: move mem_type's real definition to asm/mach/map.h   Russell King - ARM Linux
• [RFC PATCH] of: DMA helpers: manage generic requests specification   Russell King - ARM Linux
• [PATCH 0/9] DMA engine cookie handling cleanups   Russell King - ARM Linux
• [PATCH 2/9] dmaengine: move last completed cookie into generic dma_chan structure   Russell King - ARM Linux
• [PATCH 3/9] dmaengine: add private header file   Russell King - ARM Linux
• [PATCH 4/9] dmaengine: consolidate assignment of DMA cookies   Russell King - ARM Linux
• [PATCH 5/9] dmaengine: provide a common function for completing a dma descriptor   Russell King - ARM Linux
• [PATCH 6/9] dmaengine: consolidate tx_status functions   Russell King - ARM Linux
• [PATCH 7/9] dmaengine: consolidate initialization of cookies   Russell King - ARM Linux
• [PATCH 0/9] DMA engine cookie handling cleanups   Russell King - ARM Linux
• [PATCH 0/9] DMA engine cookie handling cleanups   Russell King - ARM Linux
• [PATCH 6/9] dmaengine: consolidate tx_status functions   Russell King - ARM Linux
• [PATCH] ARM: remove ixp2000 platform   Russell King - ARM Linux
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Russell King - ARM Linux
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Russell King - ARM Linux
• Problems with "[PATCH 0/9] DMA engine cookie handling cleanups"   Russell King - ARM Linux
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Russell King - ARM Linux
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Russell King - ARM Linux
• [alsa-devel] [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Russell King - ARM Linux
• [PATCH v4] lpc32xx: Added ethernet driver: smp_wmb()   Russell King - ARM Linux
• [PATCH v5 5/7] ARM: ixp4xx: use runtime ioremap hook   Russell King - ARM Linux
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Russell King - ARM Linux
• [PATCH 1/9] dmaengine: mv_xor: remove write-only is_complete_cookie   Russell King - ARM Linux
• [PATCH 2/9] dmaengine: move last completed cookie into generic dma_chan structure   Russell King - ARM Linux
• [PATCH 3/9] dmaengine: add private header file   Russell King - ARM Linux
• [PATCH 4/9] dmaengine: consolidate assignment of DMA cookies   Russell King - ARM Linux
• [PATCH 5/9] dmaengine: provide a common function for completing a dma descriptor   Russell King - ARM Linux
• [PATCH 6/9] dmaengine: consolidate tx_status functions   Russell King - ARM Linux
• [PATCH 7/9] dmaengine: consolidate initialization of cookies   Russell King - ARM Linux
• [PATCH 8/9] dmaengine: fix cookie handling in iop-adma.c and ppc4xx/adma.c   Russell King - ARM Linux
• [PATCH 9/9] dmaengine: ensure all DMA engine drivers initialize their cookies   Russell King - ARM Linux
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Russell King - ARM Linux
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Russell King - ARM Linux
• [PATCH] ARM: remove ixp2000 platform   Russell King - ARM Linux
• [PATCH 1/9 v2] ARM: at91: usb ohci add dt support   Russell King - ARM Linux
• [PATCH 0/4] perf IRQ fixes   Russell King - ARM Linux
• [PATCH 14/15] watchdog/mpcore_wdt: Add clock framework support   Russell King - ARM Linux
• [PATCH] ARM: S3C24XX: Fix Section mismatch   Russell King - ARM Linux
• [PATCH 14/15] watchdog/mpcore_wdt: Add clock framework support   Russell King - ARM Linux
• [PATCH 14/15] watchdog/mpcore_wdt: Add clock framework support   Russell King - ARM Linux
• soft lockup on omap3 (dm3730)   Russell King - ARM Linux
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Russell King - ARM Linux
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Russell King - ARM Linux
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Russell King - ARM Linux
• [GIT PULL] One more sched_clock() patch   Russell King - ARM Linux
• [PATCH] ARM: LPX32xx: DMA support   Russell King - ARM Linux
• Latest OMAP4 build errors   Russell King - ARM Linux
• [PATCH] pxa/hx4700: Reduce sleep mode power consumption by 35%   Russell King - ARM Linux
• [PATCH] serial: PL011: clear pending interrupts   Russell King - ARM Linux
• [PATCH] serial: PL011: clear pending interrupts   Russell King - ARM Linux
• [PATCH] serial: PL011: clear pending interrupts   Russell King - ARM Linux
• [PATCH] serial: PL011: clear pending interrupts   Russell King - ARM Linux
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Russell King - ARM Linux
• Regression in 3.2.9 for omap-serial (at least)   Russell King - ARM Linux
• Conflict between Versatile Express DT conversion and local timer updates   Russell King - ARM Linux
• [PATCH v6 1/3] USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp   Russell King - ARM Linux
• Conflict between Versatile Express DT conversion and local timer updates   Russell King - ARM Linux
• Conflict between Versatile Express DT conversion and local timer updates   Russell King - ARM Linux
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Russell King - ARM Linux
• Conflict between Versatile Express DT conversion and local timer updates   Russell King - ARM Linux
• [PATCH] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• Conflict between Versatile Express DT conversion and local timer updates   Russell King - ARM Linux
• Lost fixes?   Russell King - ARM Linux
• [PATCH v7] ARM: net: JIT compiler for packet filters   Russell King - ARM Linux
• [PATCH 2/5] MMC: mmci: Seperate ARM variants from generic code   Russell King - ARM Linux
• [PATCH 5/5] MMC: mmci: Add required documentation for Device Tree bindings   Russell King - ARM Linux
• [PATCH 2/5] MMC: mmci: Seperate ARM variants from generic code   Russell King - ARM Linux
• [PATCH 2/5] MMC: mmci: Seperate ARM variants from generic code   Russell King - ARM Linux
• [PATCH 5/5] MMC: mmci: Add required documentation for Device Tree bindings   Russell King - ARM Linux
• [PATCH 5/5] MMC: mmci: Add required documentation for Device Tree bindings   Russell King - ARM Linux
• [PATCH] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• [PATCH 2/5] MMC: mmci: Seperate ARM variants from generic code   Russell King - ARM Linux
• [PATCH 0/5] MMC: mmci: Provide bindings for Device Tree   Russell King - ARM Linux
• [PATCH] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• [PATCH] drivers/base: fix compiler warning in SoC export driver - idr should be ida   Russell King - ARM Linux
• [PATCH] ARM: lib: use LDRD/STRD for data copy   Russell King - ARM Linux
• [PATCH] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• [PATCH] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• [PATCH] ARM: lib: use LDRD/STRD for data copy   Russell King - ARM Linux
• [PATCH 1/2] clk: Fix error handling in fixed clock hardware type register fn   Russell King - ARM Linux
• [PATCH v7 1/3] Documentation: common clk API   Russell King - ARM Linux
• [PATCH 3/9] ARM: omap2/n8x0: work around modular omap mmc   Russell King - ARM Linux
• [PATCH v2] ARM: pxa: use common IOMEM definition   Russell King - ARM Linux
• [PATCH v8 RESEND] ARM: net: JIT compiler for packet filters   Russell King - ARM Linux
• [GIT PULL 0/9] arm-soc updates, first batch   Russell King - ARM Linux
• Inconsistent kallsyms data on ARM.   Russell King - ARM Linux
• ARM11MPcore: tlb_ops_need_broadcast causes deadlock   Russell King - ARM Linux
• [PATCH v8 RESEND] ARM: net: JIT compiler for packet filters   Russell King - ARM Linux
• ARM11MPcore: tlb_ops_need_broadcast causes deadlock   Russell King - ARM Linux
• ARM11MPcore: tlb_ops_need_broadcast causes deadlock   Russell King - ARM Linux
• Inconsistent kallsyms data on ARM.   Russell King - ARM Linux
• [PATCH] serial: pl011: implement workaround for CTS clear event issue   Russell King - ARM Linux
• [PATCH 6/6] ARM: OMAP: fix cpufreq build   Russell King - ARM Linux
• [PATCH 2/2] ARM: lib: use LDRD/STRD for data copy   Russell King - ARM Linux
• [CPUFREQ] Fix exposure of ARM_EXYNOS4210_CPUFREQ   Russell King - ARM Linux
• [PATCH v8 RESEND] ARM: net: JIT compiler for packet filters   Russell King - ARM Linux
• [GIT PULL 1/5] ARM: cleanups of io includes   Russell King - ARM Linux
• [PATCH] ARM: pxa: fix regulator related build fail in magician_defconfig   Russell King - ARM Linux
• [PATCH] ARM: pxa: fix regulator related build fail in magician_defconfig   Russell King - ARM Linux
• [GIT PULL 1/5] ARM: cleanups of io includes   Russell King - ARM Linux
• arm: mm: fix faulty calculation of area to perform cache operation   Russell King - ARM Linux
• [PATCH] cpufreq: OMAP: fix build errors: depends on ARCH_OMAP2PLUS   Russell King - ARM Linux
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Russell King - ARM Linux
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Russell King - ARM Linux
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Russell King - ARM Linux
• [PATCH] ARM: amba: adapt to regulator probe deferral change   Russell King - ARM Linux
• [PATCH] ARM: include linux/bug.h in insn.c   Russell King - ARM Linux
• [PATCH] ARM: amba: adapt to regulator probe deferral change   Russell King - ARM Linux
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Russell King - ARM Linux
• [alsa-devel] [PATCH] ASoC: sgtl5000: fix power on/off of MIC bias   Xu Lionel-R63889
• [PATCH 05/14] IA64: adapt for dma_map_ops changes   Tony Luck
• [PATCH 05/14] IA64: adapt for dma_map_ops changes   Luck, Tony
• [PATCH] iommu: OMAP: device detach on domain destroy   Omar Ramirez Luna
• [PATCH v2 19/28] ARM: Add fixed PCI i/o mapping   Andrew Lunn
• [PATCH 4/4] ARM: kirkwood: convert orion-wdt to fdt.   Andrew Lunn
• [PATCH v5 4/4] clk: basic clock hardware types   Andrew Lunn
• [PATCH v5 4/4] clk: basic clock hardware types   Andrew Lunn
• [PATCH v5 4/4] clk: basic clock hardware types   Andrew Lunn
• [PATCH] clk: Fix compile errors in DEFINE_CLK_GATE   Andrew Lunn
• [PATCH v5 4/4] clk: basic clock hardware types   Andrew Lunn
• [PATCH v5 4/4] clk: basic clock hardware types   Andrew Lunn
• [RFC 00/14] Generic clk for Orion platforms.   Andrew Lunn
• [RFC 00/14] Generic clk for Orion platforms.   Andrew Lunn
• [RFC 00/14] Generic clk for Orion platforms.   Andrew Lunn
• [RFC 09/14] MV SATA: Add per channel clk/clkdev support.   Andrew Lunn
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Andrew Lunn
• [PATCH v5 3/4] clk: introduce the common clock framework   Andrew Lunn
• [PATCH v5 3/4] clk: introduce the common clock framework   Andrew Lunn
• [PATCH v6 1/3] Documentation: common clk API   Andrew Lunn
• [PATCH v6 2/3] clk: introduce the common clock framework   Andrew Lunn
• [PATCH v6 3/3] clk: basic clock hardware types   Andrew Lunn
• [PATCH 02/10] clk: remove unnecessary EXPORT_SYMBOL_GPL   Andrew Lunn
• [PATCH 0/2] mxc_ehci: expand usb_hwinit options from boardfile   Daniel Mack
• [PATCH v4 00/11] ep93xx: Move SoC private bits to core   Ryan Mallon
• [PATCH v4 01/11] ep93xx: Move PHYS_BASE defines to local SoC header file   Ryan Mallon
• [PATCH v4 02/11] ep93xx: Don't use system controller defines in audio drivers   Ryan Mallon
• [PATCH v4 03/11] ep93xx: Move GPIO defines to gpio-ep93xx.h   Ryan Mallon
• [PATCH v4 04/11] ep93xx: Use ioremap for backlight driver   Ryan Mallon
• [PATCH v4 05/11] ep93xx: Convert the watchdog driver into a platform device.   Ryan Mallon
• [PATCH v4 06/11] ep93xx: Move peripheral defines to local SoC header   Ryan Mallon
• [PATCH v4 07/11] ep93xx: Configure GPIO ports in core code   Ryan Mallon
• [PATCH v4 08/11] ep93xx: Make syscon access functions private to SoC   Ryan Mallon
• [PATCH v4 09/11] ep93xx: Move crunch code to mach-ep93xx directory   Ryan Mallon
• [PATCH v4 10/11] ep93xx: Move EP93XX_SYSCON defines to SoC private header   Ryan Mallon
• [PATCH v4 11/11] ep93xx: Remove unnecessary includes of ep93xx-regs.h   Ryan Mallon
• [PATCH v4 00/11] ep93xx: Move SoC private bits to core   Ryan Mallon
• [PATCH v4 02/11] ep93xx: Don't use system controller defines in audio drivers   Ryan Mallon
• [GIT PULL] ep93xx for v3.4   Ryan Mallon
• [PATCH v4 09/10] pwm: Add PXA support   Ryan Mallon
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Ryan Mallon
• [PATCH 1/3] PATA host controller driver for ep93xx   Ryan Mallon
• [PATCH 1/3] PATA host controller driver for ep93xx   Ryan Mallon
• [PATCH v5 2/3] arm:davinci: move emif driver to mfd framework   Manjunathappa, Prakash
• [PATCH] arm:da850: register musb device   Manjunathappa, Prakash
• [PATCH] arm:da850: register musb device   Manjunathappa, Prakash
• [PATCH] arm:da850: register musb device   Manjunathappa, Prakash
• [PATCH v5 2/3] arm:davinci: move emif driver to mfd framework   Manjunathappa, Prakash
• [PATCH] ARM: OMAP: Add support for AM35xx UART4/ttyO3   Kyle Manna
• [PATCH] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Michal Marek
• [PATCH 2/7] Add various hugetlb page table fix   Catalin Marinas
• [PATCH 1/7] Add various hugetlb arm high level hooks   Catalin Marinas
• [PATCH v2 4/5] Cortex-M3: Add base support for Cortex-M3   Catalin Marinas
• [PATCH v2 5/5] Cortex-M3: Add support for exception handling   Catalin Marinas
• [PATCH v3 0/5] ARM: Initial support for Cortex-M3   Catalin Marinas
• spinlock_t and tagged memory block size   Catalin Marinas
• [PATCH] ARM: fixup section mismatch warning for alloc_init_pud()   Catalin Marinas
• [PATCH] ARM: Do not map the vectors page as write-through on UP systems   Catalin Marinas
• [RFC] Merge 'arch/arm/mach-imx/dma-v1.c' into 'drivers/dma/imx-dma.c'   javier Martin
• [PATCH v2 2/2] dmaengine: Add support for multiple descriptors for imx-dma.   javier Martin
• Problems with "[PATCH 0/9] DMA engine cookie handling cleanups"   javier Martin
• Problems with "[PATCH 0/9] DMA engine cookie handling cleanups"   javier Martin
• [PATCH 01/14] dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c   javier Martin
• [PATCH 01/14] dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c   javier Martin
• [PATCH v2 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   javier Martin
• [PATCH v2 01/13] dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c   javier Martin
• [PATCH v2 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   javier Martin
• [PATCH v3 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   javier Martin
• [PATCH v3 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   javier Martin
• [PATCH v3 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   javier Martin
• [PATCH v3 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   javier Martin
• [PATCH 3/3] i.MX27: visstrim_m10: Remove use of MX2_CAMERA_SWAP16.   javier Martin
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Dave Martin
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Dave Martin
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Dave Martin
• [RFC PATCH 0/2] ARM: assembler: Add uniform assembler framework   Dave Martin
• [RFC PATCH 0/2] ARM: assembler: Add uniform assembler framework   Dave Martin
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Dave Martin
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Dave Martin
• [PATCH] arm: Add unwinding support for memset and memzero.   Dave Martin
• [PATCH 0/4] ARM: opcodes: Facilitate custom opcode injection   Dave Martin
• [PATCH 1/4] ARM: opcodes: Don't define the thumb32 byteswapping macros for BE32   Dave Martin
• [PATCH 2/4] ARM: opcodes: Make opcode byteswapping macros assembly-compatible   Dave Martin
• [PATCH 3/4] ARM: opcodes: Add helpers for emitting custom opcodes   Dave Martin
• [PATCH 4/4] ARM: opcodes: Opcode definitions for the Virtualization Extensions   Dave Martin
• [PATCH 2/4] ARM: opcodes: Make opcode byteswapping macros assembly-compatible   Dave Martin
• [PATCH 4/4] ARM: opcodes: Opcode definitions for the Virtualization Extensions   Dave Martin
• [PATCH] arm: Add unwinding support for memset and memzero.   Dave Martin
• [PATCH v2 0/4] ARM: opcodes: Facilitate custom opcode injection   Dave Martin
• [PATCH v2 1/4] ARM: opcodes: Don't define the thumb32 byteswapping macros for BE32   Dave Martin
• [PATCH v2 2/4] ARM: opcodes: Make opcode byteswapping macros assembly-compatible   Dave Martin
• [PATCH v2 3/4] ARM: opcodes: Add helpers for emitting custom opcodes   Dave Martin
• [PATCH v2 4/4] ARM: opcodes: Opcode definitions for the Virtualization Extensions   Dave Martin
• [PATCH v3 2/2] dmaengine: Add support for multiple descriptors for imx-dma.   Javier Martin
• [PATCH 00/14] dmaengine: imx-dma: merge dma arch code into dmaengine.   Javier Martin
• [PATCH 01/14] dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c   Javier Martin
• [PATCH 02/14] dmaengine: imx-dma: remove data member form internal structure.   Javier Martin
• [PATCH 03/14] dmaengine: imx-dma: remove dma_mode member of internal structure.   Javier Martin
• [PATCH 04/14] dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.   Javier Martin
• [PATCH 05/14] dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function.   Javier Martin
• [PATCH 06/14] dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function.   Javier Martin
• [PATCH 07/14] dmaengine: imx-dma: remove sg member from internal structure.   Javier Martin
• [PATCH 08/14] dmaengine: imx-dma: remove in_use field of internal structure.   Javier Martin
• [PATCH 09/14] dmaengine: imx-dma: remove resbytes field of internal structure.   Javier Martin
• [PATCH 10/14] dmaengine: imx-dma: remove internal structure.   Javier Martin
• [PATCH 11/14] dmaengine: imx-dma: remove unused arg of imxdma_sg_next.   Javier Martin
• [PATCH 12/14] dmaengine: imx-dma: integrate 'imx_dmav1_baseaddr' and 'dma_clk' inside dmaengine structure.   Javier Martin
• [PATCH 13/14] dmaengine: imx-dma: use dev_dbg and dev_warn for messages.   Javier Martin
• [PATCH 14/14] dmaengine: imx-dma: remove dma-v1.c and dma-v1.h   Javier Martin
• [PATCH v2 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   Javier Martin
• [PATCH v2 01/13] dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c   Javier Martin
• [PATCH v2 02/13] dmaengine: imx-dma: remove data member from internal structure.   Javier Martin
• [PATCH v2 03/13] dmaengine: imx-dma: remove dma_mode member of internal structure.   Javier Martin
• [PATCH v2 04/13] dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.   Javier Martin
• [PATCH v2 05/13] dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function.   Javier Martin
• [PATCH v2 06/13] dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function.   Javier Martin
• [PATCH v2 07/13] dmaengine: imx-dma: remove sg member from internal structure.   Javier Martin
• [PATCH v2 08/13] dmaengine: imx-dma: remove 'in_use' field of 'internal' structure.   Javier Martin
• [PATCH v2 09/13] dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure.   Javier Martin
• [PATCH v2 10/13] dmaengine: imx-dma: remove internal structure.   Javier Martin
• [PATCH v2 11/13] dmaengine: imx-dma: remove unused arg of imxdma_sg_next.   Javier Martin
• [PATCH v2 12/13] dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'.   Javier Martin
• [PATCH v2 13/13] dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages.   Javier Martin
• [PATCH v3 00/13] dmaengine: imx-dma: merge dma arch code into dmaengine.   Javier Martin
• [PATCH v3 01/13] dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c   Javier Martin
• [PATCH v3 02/13] dmaengine: imx-dma: remove data member from internal structure.   Javier Martin
• [PATCH v3 03/13] dmaengine: imx-dma: remove dma_mode member of internal structure.   Javier Martin
• [PATCH v3 04/13] dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.   Javier Martin
• [PATCH v3 05/13] dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function.   Javier Martin
• [PATCH v3 06/13] dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function.   Javier Martin
• [PATCH v3 07/13] dmaengine: imx-dma: remove sg member from internal structure.   Javier Martin
• [PATCH v3 08/13] dmaengine: imx-dma: remove 'in_use' field of 'internal' structure.   Javier Martin
• [PATCH v3 09/13] dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure.   Javier Martin
• [PATCH v3 10/13] dmaengine: imx-dma: remove internal structure.   Javier Martin
• [PATCH v3 11/13] dmaengine: imx-dma: remove unused arg of imxdma_sg_next.   Javier Martin
• [PATCH v3 12/13] dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'.   Javier Martin
• [PATCH v3 13/13] dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages.   Javier Martin
• [PATCH] dmaengine: i.MX: Add support for interleaved transfers.   Javier Martin
• [PATCH] MX2: Fix mx2_camera clock regression.   Javier Martin
• [PATCH v4 00/15] dmaengine: imx-dma: rebase of features for 3.4.   Javier Martin
• [PATCH v4 01/15] dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c   Javier Martin
• [PATCH v4 02/15] dmaengine: imx-dma: remove data member from internal structure.   Javier Martin
• [PATCH v4 03/15] dmaengine: imx-dma: remove dma_mode member of internal structure.   Javier Martin
• [PATCH v4 04/15] dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.   Javier Martin
• [PATCH v4 05/15] dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function.   Javier Martin
• [PATCH v4 06/15] dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function.   Javier Martin
• [PATCH v4 07/15] dmaengine: imx-dma: remove sg member from internal structure.   Javier Martin
• [PATCH v4 08/15] dmaengine: imx-dma: remove 'in_use' field of 'internal' structure.   Javier Martin
• [PATCH v4 09/15] dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure.   Javier Martin
• [PATCH v4 10/15] dmaengine: imx-dma: remove internal structure.   Javier Martin
• [PATCH v4 11/15] dmaengine: imx-dma: remove unused arg of imxdma_sg_next.   Javier Martin
• [PATCH v4 12/15] dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'.   Javier Martin
• [PATCH v4 13/15] dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages.   Javier Martin
• [PATCH v4 14/15] dmaengine: i.MX: Add support for interleaved transfers.   Javier Martin
• [PATCH v4 15/15] dmaengine: i.MX: Fix merge of cookie branch.   Javier Martin
• [PATCH 0/3] media: tvp5150: Fix mbus format to UYUV instead of YUYV.   Javier Martin
• [PATCH 1/3] media: tvp5150: Fix mbus format.   Javier Martin
• [PATCH 2/3] media: mx2_camera: Fix mbus format handling.   Javier Martin
• [PATCH 3/3] i.MX27: visstrim_m10: Remove use of MX2_CAMERA_SWAP16.   Javier Martin
• [PATCH v2 0/3] media: tvp5150: Fix mbus format to UYUV instead of YUYV.   Javier Martin
• [PATCH v2 1/3] media: tvp5150: Fix mbus format.   Javier Martin
• [PATCH v2 2/3] i.MX27: visstrim_m10: Remove use of MX2_CAMERA_SWAP16.   Javier Martin
• [PATCH v2 3/3] media: mx2_camera: Fix mbus format handling.   Javier Martin
• Inconsistent kallsyms data on ARM.   Jon Masters
• Inconsistent kallsyms data on ARM.   Jon Masters
• [Android-virt] [PATCH] ARM: test for PMU feature on v7 (v2 with typo fix)   Peter Maydell
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
• [PATCH] iomux-mx25.h slew rate adjusted for LCD __LD pins   Mehnert, Torsten
• AW: [PATCH] iomux-mx25.h slew rate adjusted for LCD __LD pins   Mehnert, Torsten
• [PATCH] iomux-mx25.h slew rate adjusted for LCD __LD pins   Mehnert, Torsten
• [PATCH] ARM: OMAP2+: powerdomain: unwrap and simplify logging strings   Menon, Nishanth
• [PATCHv4 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Nishanth Menon
• [PATCH] ARM: OMAP2+: voltage: ensure voltage used is exact voltage from OPP table   Nishanth Menon
• [PATCHv5 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Nishanth Menon
• [PATCH] OMAP3+: PM: VP: fix integer truncation error   Nishanth Menon
• [PATCH] OMAP3+: PM: VP: fix integer truncation error   Menon, Nishanth
• [PATCH V2] OMAP3+: PM: VP: fix integer truncation error   Nishanth Menon
• [PATCH 3/6] ARM: OMAP3+: SmartReflex: introduce notifier_control   Menon, Nishanth
• [PATCH] OMAP3: OPP: Test for IVA subsystem before attempting to add IVA OPP   Menon, Nishanth
• [PATCH] OMAP: clock: fix race in disable all clocks   Nishanth Menon
• [PATCH] OMAP3: OPP: Test for IVA subsystem before attempting to add IVA OPP   Nishanth Menon
• [PATCH] OMAP3: OPP: Test for IVA subsystem before attempting to add IVA OPP   Menon, Nishanth
• [PATCH] OMAP2+: OPP: allow OPP enumeration to continue if device is not present   Nishanth Menon
• [PATCH] OMAP3: OPP: Test for IVA subsystem before attempting to add IVA OPP   Menon, Nishanth
• [PATCH v5] lpc32xx: Added ethernet driver   David Miller
• [PATCH v7] lpc32xx: Added ethernet driver   David Miller
• [PATCH v8] ARM: net: JIT compiler for packet filters   David Miller
• [PATCH v8 RESEND] ARM: net: JIT compiler for packet filters   David Miller
• [PATCH v3] serial: PL011: clear pending interrupts   Chanho Min
• [PATCH v3] serial: PL011: clear pending interrupts   Chanho Min
• [RFC][PATCH 0/5] Convert GPMC to driver   Afzal Mohammed
• [RFC][PATCH 1/5] ARM: OMAP2+: gpmc: driver conversion   Afzal Mohammed
• [RFC][PATCH 2/5] ARM: OMAP2+: nand: create platform data structure   Afzal Mohammed
• [RFC][PATCH 3/5] ARM: OMAP2+: gpmc-nand: populate gpmc configs   Afzal Mohammed
• [RFC][PATCH 4/5] mtd: nand: omap2: obtain memory from resource   Afzal Mohammed
• [TMP][PATCH 5/5] OMAP3EVM: Test gpmc-nand   Afzal Mohammed
• [RFC][PATCH 1/5] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [RFC][PATCH 1/5] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [RFC][PATCH 0/5] Convert GPMC to driver   Mohammed, Afzal
• [RFC][PATCH 1/5] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [RFC][PATCH 1/5] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [RFC][PATCH v2 0/5] Convert GPMC to driver   Afzal Mohammed
• [RFC][PATCH v2 1/5] ARM: OMAP2+: gpmc: driver conversion   Afzal Mohammed
• [RFC][PATCH v2 2/5] ARM: OMAP2+: nand: create platform data structure   Afzal Mohammed
• [RFC][PATCH v2 3/5] ARM: OMAP2+: gpmc-nand: populate gpmc configs   Afzal Mohammed
• [RFC][PATCH v2 4/5] mtd: nand: omap2: obtain memory from resource   Afzal Mohammed
• [TMP][PATCH v2 5/5] OMAP3EVM: Test gpmc-nand   Afzal Mohammed
• [RFC][PATCH 1/5] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [TMP][PATCH 5/5] OMAP3EVM: Test gpmc-nand   Mohammed, Afzal
• [TMP][PATCH 5/5] OMAP3EVM: Test gpmc-nand   Mohammed, Afzal
• [RFC][PATCH 1/5] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [PATCH] ARM: fixup section mismatch warning for alloc_init_pud()   Kuninori Morimoto
• [PATCH V2] iop-adma: Corrected array overflow in RAID6 Xscale(R) test.   Don Morris
• [PATCH V2] iop-adma: Corrected array overflow in RAID6 Xscale(R) test.   Don Morris
• [PATCH 3/3] led-triggers: create a trigger for CPU activity   Andrew Morton
• [PATCH 07/16] mm/arm: use vm_flags_t for vma flags   Andrew Morton
• [V2 2/4] rtc: fix 88pm860x rtc irq enable callback   Andrew Morton
• AMP IPC   Jorge Luis Zapata Muga
• [PATCHv2 07/14] SH: adapt for dma_map_ops changes   Paul Mundt
• [PATCH 1/4] ARM: EXYNOS: Add __init attribute to nuri_camera_init()   Sylwester Nawrocki
• [PATCH 2/4] ARM: EXYNOS: Add __init attribute to universal_camera_init()   Sylwester Nawrocki
• [PATCH 01/11] drivercore: Add driver probe deferral mechanism   Sylwester Nawrocki
• Handling device shared SFR on dt platform   Sylwester Nawrocki
• Handling device shared SFR on dt platform   Sylwester Nawrocki
• [PATCH] ARM: OMAP2+: powerdomain: unwrap and simplify logging strings   Rajendra Nayak
• [PATCH 0/4] twl-regulator DT adaptation and updates to add new regulators   Rajendra Nayak
• [PATCHv3 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Rajendra Nayak
• [PATCHv3 4/6] ARM: OMAP3 PM: Enable IO Wake up   Rajendra Nayak
• [PATCHv3 4/4] ARM: OMAP3+: add prcm chain interrupts to the interrupt list   Rajendra Nayak
• [PATCHv3 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Rajendra Nayak
• [PATCH] ARM: OMAP: hwmod: Use sysc_fields->srst_shift and get rid of hardcoded SYSC_TYPE2_SOFTRESET_MASK   Rajendra Nayak
• [PATCH 2/4] mmc: omap_hsmmc: Use gpio_find_by_chip_name() for omap_hsmmc_gpio_init()   Rajendra Nayak
• [PATCH 3/4] mmc: omap_hsmmc: Use GPIO offset for external GPIO chips   Rajendra Nayak
• [PATCH 4/4] mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect   Rajendra Nayak
• [PATCH 2/4] mmc: omap_hsmmc: Use gpio_find_by_chip_name() for omap_hsmmc_gpio_init()   Rajendra Nayak
• [PATCH 0/4] Start getting rid of pdata callbacks with gpio_find_by_chip_name()   Rajendra Nayak
• [PATCHv3 4/6] ARM: OMAP3 PM: Enable IO Wake up   Rajendra Nayak
• [PATCH v2 0/6] mmc: omap_hsmmc: Clean up use/abuse of pdev->id   Rajendra Nayak
• [PATCH 11/12] mfd: twl4030-irq: Return twl6030_mmc_card_detect IRQ for board setup   Rajendra Nayak
• [PATCH 4/4] mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect   Rajendra Nayak
• [PATCHv4 0/6] ARM: OMAP3+: IO daisychain support fixes   Rajendra Nayak
• [PATCHv4 1/6] ARM: OMAP3 PM: correct enable/disable of daisy io chain   Rajendra Nayak
• [PATCHv4 1/6] ARM: OMAP3 PM: correct enable/disable of daisy io chain   Rajendra Nayak
• [PATCHv4 5/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Rajendra Nayak
• [PATCHv4 1/6] ARM: OMAP3 PM: correct enable/disable of daisy io chain   Rajendra Nayak
• [PATCHv4 4/6] ARM: OMAP3+: PRM: Enable IO wake up   Rajendra Nayak
• [PATCHv4 4/6] ARM: OMAP3+: PRM: Enable IO wake up   Rajendra Nayak
• [PATCHv4 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Rajendra Nayak
• [PATCHv3 1/4] ARM: OMAP4: suspend: Program all domains to retention   Rajendra Nayak
• [PATCHv3 1/4] ARM: OMAP4: suspend: Program all domains to retention   Rajendra Nayak
• [PATCH v2 0/6] mmc: omap_hsmmc: Clean up use/abuse of pdev->id   Rajendra Nayak
• [PATCH v2 0/6] mmc: omap_hsmmc: Clean up use/abuse of pdev->id   Rajendra Nayak
• [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree   Rajendra Nayak
• [PATCH 00/15] ARM: OMAP4: hwmod data: add almost all remaining IP blocks   Rajendra Nayak
• [PATCH v2 0/6] mmc: omap_hsmmc: Clean up use/abuse of pdev->id   Rajendra Nayak
• [PATCH 0/4] hsmmc cleanups in platform callback routines   Rajendra Nayak
• [PATCH 1/4] ARM: OMAP2+: hsmmc: Add a flag to identify modules supporting clock src selection   Rajendra Nayak
• [PATCH 2/4] ARM: OMAP2+: hsmmc: Split the clock src selection and pbias programming   Rajendra Nayak
• [PATCH 3/4] ARM: OMAP2+: hsmmc: Let board files specify if an external transceiver exists   Rajendra Nayak
• [PATCH 4/4] ARM: OMAP2430SDP: No support to switch to external clock on omap2430   Rajendra Nayak
• [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree   Rajendra Nayak
• [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data   Rajendra Nayak
• [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data   Rajendra Nayak
• [PATCHv5 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Rajendra Nayak
• [PATCHv5 3/6] ARM: OMAP4 PM: Add IO Daisychain support   Rajendra Nayak
• [PATCHv5 0/6] ARM: OMAP3+: IO daisy chain support fixes   Rajendra Nayak
• [PATCHv5 0/6] ARM: OMAP3+: IO daisy chain support fixes   Rajendra Nayak
• [PATCHv5 3/6] ARM: OMAP4 PM: Add IO Daisychain support   Rajendra Nayak
• [PATCHv5 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Rajendra Nayak
• [PATCH v2 0/4] omap hsmmc device tree support   Rajendra Nayak
• [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree   Rajendra Nayak
• [PATCH v2 2/4] mmc: omap_hsmmc: Avoid a regulator voltage change with dt   Rajendra Nayak
• [PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data   Rajendra Nayak
• [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data   Rajendra Nayak
• [PATCH 0/2] Fixes in hwmod reset code   Rajendra Nayak
• [PATCH 1/2] ARM: omap: hwmod: Restore sysc after a reset   Rajendra Nayak
• [PATCH 2/2] ARM: omap: hwmod: Make omap_hwmod_softreset wait for reset status   Rajendra Nayak
• [PATCH 2/2] ARM: omap: hwmod: Make omap_hwmod_softreset wait for reset status   Rajendra Nayak
• [PATCH v2 0/2] Fixes in hwmod reset code   Rajendra Nayak
• [PATCH v2 1/2] ARM: omap: hwmod: Restore sysc after a reset   Rajendra Nayak
• [PATCH v2 2/2] ARM: omap: hwmod: Make omap_hwmod_softreset wait for reset status   Rajendra Nayak
• [PATCH v2 0/2] Fixes in hwmod reset code   Rajendra Nayak
• [PATCH v2 0/2] Fixes in hwmod reset code   Rajendra Nayak
• [PATCH v2 1/2] ARM: omap: hwmod: Restore sysc after a reset   Rajendra Nayak
• [PATCH v2 2/2] ARM: omap: hwmod: Make omap_hwmod_softreset wait for reset status   Rajendra Nayak
• [PATCH v7 2/3] clk: introduce the common clock framework   Rajendra Nayak
• [PATCH] ARM: OMAP: hwmod: Fix error handling in functions used OMAP4 onwards   Rajendra Nayak
• [PATCH] ARM: OMAP: hwmod: Fix error handling in functions used OMAP4 onwards   Rajendra Nayak
• [PATCH] ARM: OMAP: hwmod: Fix error handling in functions used OMAP4 onwards   Rajendra Nayak
• [PATCH] MM: CMA: add a simple kernel module as the helper to test CMA   Michal Nazarewicz
• [PATCH] MM: CMA: add a simple kernel module as the helper to test CMA   Michal Nazarewicz
• [PATCH v2] MM: CMA: add a simple kernel module as the helper to test CMA   Michal Nazarewicz
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Michal Nazarewicz
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Michal Nazarewicz
• [PATCH v4] mm: cma: add a simple kernel module as the helper to test CMA   Michal Nazarewicz
• [PATCH] omap3_beagle: init uart2 for beagle rev AX/BX only   Robert Nelson
• [U-Boot] zImage and raw ramdisk support -- test   Robert Nelson
• [PATCH v2.1 01/10] cpu: Introduce clear_tasks_mm_cpumask() helper   Oleg Nesterov
• [PATCH v2.1 01/10] cpu: Introduce clear_tasks_mm_cpumask() helper   Oleg Nesterov
• [PATCH v2 2/3] ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header   Jarkko Nikula
• [PATCH 5/5] ARM: OMAP2+: clean up some cppcheck warnings   Jarkko Nikula
• DaVinci unbanked GPIO IRQs broken   Nori, Sekhar
• [GIT PULL] maintainers file updates for DaVinci   Nori, Sekhar
• [GIT PULL] DaVinci DM644x video display support   Nori, Sekhar
• [GIT PULL] DaVinci DM644x video display support   Nori, Sekhar
• [GIT PULL v2] DaVinci DM644x video display support   Nori, Sekhar
• [PATCH] ARM: davinci: cpufreq: fix compiler warning   Nori, Sekhar
• [PATCH] ARM: davinci: DA850: move da850_register_pm to .init.text   Nori, Sekhar
• [GIT PULL] DaVinci fixes for v3.3   Nori, Sekhar
• [GIT PULL] DaVinci fixes for v3.3   Nori, Sekhar
• [GIT PULL v2] DaVinci DM644x video display support   Nori, Sekhar
• [GIT PULL v2] DaVinci DM644x video display support   Nori, Sekhar
• [PATCH v8 4/8] ARM: davinci: Consolidate time keeping and irq enable   Nori, Sekhar
• [PATCH v8 4/8] ARM: davinci: Consolidate time keeping and irq enable   Nori, Sekhar
• [PATCH] ARM: davinci: implement DEBUG_LL port choice   Nori, Sekhar
• [PATCH] ARM: davinci: Fix for cpuidle consolidation changes   Nori, Sekhar
• [PATCH] efikamx: match machine descriptions with legacy   Hector Oron
• [PATCH] efikamx: match machine descriptions with legacy   Hector Oron
• [V4 0/4] patches for power control on pm8606 oscillator   Samuel Ortiz
• [PATCH v5 2/3] arm:davinci: move emif driver to mfd framework   Samuel Ortiz
• [PATCH 1/5] mfd : ux500 - Cleanup duplicate definitions   Samuel Ortiz
• [PATCH 4/4] mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect   Samuel Ortiz
• [PATCH 1/4] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Samuel Ortiz
• [PATCH 0/5] MFD: Reverting twl6040 patches going for 3.4   Samuel Ortiz
• Lost fixes?   Samuel Ortiz
• [PATCH] mfd: pcap: depend on arch-pxa   Samuel Ortiz
• [PATCH v5 2/3] arm:davinci: move emif driver to mfd framework   Samuel Ortiz
• [PATCH v10] mfd: Add anatop mfd driver   Samuel Ortiz
• [PATCH 0/8] ARM: Tegra: cleanup patches from Arnd Bergmann   Alan Ott
• [PATCH 1/8] ARM: tegra: export tegra_gpio_{en,dis}able   Alan Ott
• [PATCH 2/8] ARM: tegra: do not hide dma declarations   Alan Ott
• [PATCH 3/8] ARM: tegra: select CPU_FREQ_TABLE   Alan Ott
• [PATCH 4/8] ARM: tegra: build localtimer support only when needed   Alan Ott
• [PATCH 5/8] ARM: tegra: work around tegra THUMB2_KERNEL bug   Alan Ott
• [PATCH 6/8] ARM: tegra: USB_ULPI needs USB   Alan Ott
• [PATCH 7/8] ARM: tegra: export usb phy symbols   Alan Ott
• [PATCH 8/8] ARM: tegra: HACK: remove set_irq_flags() from driver   Alan Ott
• [PATCH v2 0/6] ARM: Tegra: cleanup patches from Arnd Bergmann   Alan Ott
• [PATCH v2 1/6] ARM: tegra: do not hide dma declarations   Alan Ott
• [PATCH v2 2/6] ARM: tegra: select CPU_FREQ_TABLE   Alan Ott
• [PATCH v2 3/6] ARM: tegra: build localtimer support only when needed   Alan Ott
• [PATCH v2 4/6] ARM: tegra: work around tegra THUMB2_KERNEL bug   Alan Ott
• [PATCH v2 5/6] ARM: tegra: USB_ULPI needs USB   Alan Ott
• [PATCH v2 6/6] ARM: tegra: export usb phy symbols   Alan Ott
• [PATCH v2 0/6] ARM: Tegra: cleanup patches from Arnd Bergmann   Alan Ott
• [PATCH v3 0/5] ARM: Tegra: cleanup patches from Arnd Bergmann   Alan Ott
• [PATCH v3 1/5] ARM: tegra: do not hide dma declarations   Alan Ott
• [PATCH v3 2/5] ARM: tegra: select CPU_FREQ_TABLE   Alan Ott
• [PATCH v3 3/5] ARM: tegra: build localtimer support only when needed   Alan Ott
• [PATCH v3 4/5] ARM: tegra: select USB_ULPI if USB is selected   Alan Ott
• [PATCH v3 5/5] ARM: tegra: export usb phy symbols   Alan Ott
• [PATCH v2 5/6] ARM: tegra: USB_ULPI needs USB   Alan Ott
• [PATCH v2 2/6] ARM: tegra: select CPU_FREQ_TABLE   Alan Ott
• [PATCH 0/2] ARM: AT91: cleanup patches from Arnd Bergmann   Alan Ott
• [PATCH 1/2] ARM: at91: only RM9200 has ISA-style PIO   Alan Ott
• [PATCH 2/2] ARM: at91: Use proper __iomem annotations   Alan Ott
• [PATCH 1/2] ARM: at91: only RM9200 has ISA-style PIO   Alan Ott
• [PATCH v2 0/2] ata: AT91 ata driver requires specific platforms   Alan Ott
• [PATCH v2 1/2] ARM: AT91: Add parameter for AT91_HAS_PATA   Alan Ott
• [PATCH v2 0/1] ARM: AT91: cleanup patches from Arnd Bergmann   Alan Ott
• [PATCH v2 1/1] ARM: at91: Use proper __iomem annotations   Alan Ott
• [PATCH] ARM: at91: Add support for configurable main clock frequency.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3 v3] spi: move master of_node init to spi_alloc_master   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3 v3] of_spi: add generic binding support to specify ncs gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3 v3] spi/atmel: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Initial Device Tree system for Snowball   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6] AT91 more DT bindings   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] ARM: at91/dt: add specific DT soc init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] ARM: at91: add pmc DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] ARM: at91: always enable sam9 restart   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] ARM: at91: add RSTC (Reset Controller) dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] ARM: at91: add ram controller DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] ARM: at91: add Shutdown Controller (SHDWC) DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3 v3] of_spi: add generic binding support to specify ncs gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] spi/atmel: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mtd: ofpart Kconfig fix typo   Jean-Christophe PLAGNIOL-VILLARD
• Pre-merge-window status of the arm-soc tree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PULL] of nand generic binding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/9 v2] at91 USB DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/9 v2] ARM: at91: usb ohci add dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/9 v2] ARM: at91: dt: enable usb ohci for sam9g20, sam9g45 amd sam9x5   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/9 v2] ARM: at91: usb ehci add dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/9] ARM: at91: dt: enable usb ehci for sam9g45 and sam9x5   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] USB: at91: Device udc add dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/9] ARM: at91: sam9g20 udc add dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/9] usb: add Atmel USBA UDC DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9] ARM: at91: sam9g45 add udc DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] ARM: at91: sam9x5 add udc DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/9 v2] ARM: at91: usb ohci add dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] of: add dma-mask binding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v4] of_spi: add generic binding support to specify cs gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4 v4] spi/atmel: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4 v4] ARM: at91: sam9g20 add spi DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4 v4] ARM: at91: sam9g45 add spi DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v9] Regulator: Add Anatop regulator driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v9] Regulator: Add Anatop regulator driver   Jean-Christophe PLAGNIOL-VILLARD
• [PULL] of nand generic binding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/9 v2] ARM: at91: usb ohci add dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] of: add coherent dma-mask binding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] of: add dma-mask binding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] ARM: at91: add Shutdown Controller (SHDWC) DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6] AT91 more DT bindings   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] ARM: at91: add Shutdown Controller (SHDWC) DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] ARM: at91: add ram controller DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5 v3] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5 v3] ARM: at91: sam9g20 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5 v3] ARM: at91: usb_a9g20 add DT i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5 v3] ARM: at91: sam9g45 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5 v3] ARM: at91: sam9x5 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] ARM: at91: add ram controller DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v10] Regulator: Add Anatop regulator driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] ARM: at91: add ram controller DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5 v3] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5 v3] ARM: at91: sam9x5 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5 v3] ARM: at91: sam9g20 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5 v3] ARM: at91: sam9g20 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v10] Regulator: Add Anatop regulator driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] of: introduce helper to manage boolean   Jean-Christophe PLAGNIOL-VILLARD
• [PULL] of nand generic binding   Jean-Christophe PLAGNIOL-VILLARD
• [PULL] of nand generic binding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] of: introduce helper to manage boolean   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v4] of_spi: add generic binding support to specify cs gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v5] of_spi: add generic binding support to specify cs gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v5] of_spi: add generic binding support to specify cs gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/2] ARM: AT91: Add parameter for AT91_HAS_PATA   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] stmmac: Add device-tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] stmmac: Add device-tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] stmmac: Add device-tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] stmmac: Add device-tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v5] of_spi: add generic binding support to specify cs gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] of: introduce helper to manage boolean   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] of: introduce helper to manage boolean   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5 v3] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5 v3] ARM: at91: sam9g20 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5 v3] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5 v4] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5 v4] ARM: at91: sam9g20 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5 v4] ARM: at91: usb_a9g20 add DT i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5 v4] ARM: at91: sam9g45 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5 v4] ARM: at91: sam9x5 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5 v4] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] of: introduce helper to manage boolean   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4] of: introduce helper to manage boolean   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v1 3/5] ARM: imx28evk: add mmc dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v1 3/5] ARM: imx28evk: add mmc dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v1 3/5] ARM: imx28evk: add mmc dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/9] usb: add Atmel USBA UDC DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] stmmac: Add device-tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4] of: introduce helper to manage boolean   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Jean-Christophe PLAGNIOL-VILLARD
• [PULL 01/02] AT91 DT2 pull request   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5 v5] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PULL 01/02 v2] AT91 DT2 pull request   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v5] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/17] ARM: mark const init data with __initconst instead of __initdata   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91: add support for Telit GE863-PRO3 Evaluation Kit   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v10 2/3] ARM: EXYNOS: Change System MMU platform device definitions   Kyungmin Park
• [PATCH v10 3/3] iommu/exynos: Add iommu driver for Exynos Platforms   Kyungmin Park
• [PATCH v2 04/11] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Kyungmin Park
• [PATCH 5/5] mmc: sdhci-s3c: setup pins using pinctrl interface   Kyungmin Park
• [PATCH 2/3] ARM: Exynos: Add DRM core device support for Universal C210 board   Kyungmin Park
• [PATCH v4 0/7] Add TI EMIF SDRAM controller driver   Kyungmin Park
• [PATCH 1/2] pxa: magician/hx4700: Convert to gpio-regulator from bq24022   Paul Parsons
• Status of gpio-pxa driver and dummy clock   Paul Parsons
• Status of gpio-pxa driver and dummy clock   Paul Parsons
• [PATCH v2] ARM: pxa: fix regulator related build fail in magician_defconfig   Paul Parsons
• [PATCH] ARM: pxa: fix regulator related build fail in magician_defconfig   Paul Parsons
• [PATCH] MAINTAINERS: update maintainer entry for pxa/hx4700   Paul Parsons
• [PATCH 1/2 v6] pxa/hx4700: Add PCMCIA/CF support   Paul Parsons
• [PATCH 2/2 v5] pxa/hx4700: Add PCMCIA/CF support   Paul Parsons
• [PATCH] pxa/hx4700: Remove pcmcia platform_device structure   Paul Parsons
• [PATCH v2] pxa/hx4700: Fix basic suspend/resume   Paul Parsons
• [PATCH v3] pxa/hx4700: Fix basic suspend/resume   Paul Parsons
• [PATCH v2] pxa/hx4700: Fix basic suspend/resume   Paul Parsons
• [PATCH] pxa/hx4700: Reduce sleep mode power consumption by 35%   Paul Parsons
• [PATCH] pxa/hx4700: Reduce sleep mode power consumption by 35%   Paul Parsons
• [PATCH v2] pxa/hx4700: Reduce sleep mode battery discharge by 35%   Paul Parsons
• [PATCH] pxa/hx4700: Remove unwanted request for GPIO105   Paul Parsons
• [GIT PULL][for v3.4] pull request from board-specific branch in arch-pxa   Paul Parsons
• [PATCH] pxa/hx4700: Add standard UART to hx4700_pin_config[]   Paul Parsons
• [PATCH] pxa/hx4700: fix the LCD initialization   Paul Parsons
• [PATCH] pxa/hx4700: fix the LCD initialization   Paul Parsons
• How to add GPIO outputs to the PXA2xx MFP configuration?   Paul Parsons
• How to add GPIO outputs to the PXA2xx MFP configuration?   Paul Parsons
• How to add GPIO outputs to the PXA2xx MFP configuration?   Paul Parsons
• How to add GPIO outputs to the PXA2xx MFP configuration?   Paul Parsons
• How to add GPIO outputs to the PXA2xx MFP configuration?   Paul Parsons
• How to add GPIO outputs to the PXA2xx MFP configuration?   Paul Parsons
• How to add GPIO outputs to the PXA2xx MFP configuration?   Paul Parsons
• [PATCH] ARM: pxa: mfp: Force gpio direction for MFP_LPM_KEEP_OUTPUT   Paul Parsons
• [PATCH v12 2/3] ARM: EXYNOS: Change System MMU platform device definitions   Subash Patel
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Subash Patel
• [PATCHv7 8/9] ARM: dma-mapping: use alloc, mmap, free from dma_ops   Subash Patel
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Subash Patel
• [PATCH 0/2] ARM: dma-mapping: Fix mmap support for coherent buffers   Subash Patel
• [PATCHv7 5/9] ARM: dma-mapping: implement dma sg methods on top of any generic dma ops   Subash Patel
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Subash Patel
• [Linaro-mm-sig] [PATCHv23 12/16] mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks   Sandeep Patil
• [PATCH] mm: module_alloc: check if size is 0   Veli-Pekka Peltola
• [PATCH v2] mm: module_alloc: check if size is 0   Veli-Pekka Peltola
• [PATCH v2] mm: module_alloc: check if size is 0   Veli-Pekka Peltola
• Atmel at91x40 ("EB01" eval board) resurected   Thomas Petazzoni
• Want to Get Suggestion for MX28 USB Submisson   Chen Peter-B29397
• Want to Get Suggestion for MX28 USB Submisson   Chen Peter-B29397
• [alsa-devel] [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Trent Piepho
• [alsa-devel] [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Trent Piepho
• [alsa-devel] [PATCH v5 8/8] ASoC: fsl: add imx-sgtl5000 machine driver   Trent Piepho
• [alsa-devel] [PATCH v5 8/8] ASoC: fsl: add imx-sgtl5000 machine driver   Trent Piepho
• [alsa-devel] [PATCH v5 8/8] ASoC: fsl: add imx-sgtl5000 machine driver   Trent Piepho
• [PATCH 5/9] ARM: OMAP36xx: hwmod data: fix SmartReflex interface data   Jean Pihet
• [PATCH 4/6] ARM: OMAP: fix missing __devexit_p() annotations   Jean Pihet
• [PATCH 02/10] ARM: OMAP2+: SmartReflex: move the platform specific macros in plat-omap   Jean Pihet
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Jean Pihet
• [RFC][PATCH 1/7] ARM: OMAP4: cpuidle - Remove unused valid field   Jean Pihet
• [RFC][PATCH 2/7] ARM: OMAP4: cpuidle - Declare the states with the driver declaration   Jean Pihet
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Jean Pihet
• [RFC][PATCH 2/9] ARM: OMAP3: cpuidle - remove next_valid_state function   Jean Pihet
• [RFC][PATCH 3/9] ARM: OMAP3: cpuidle - set enable_off_mode as static   Jean Pihet
• [RFC][PATCH 4/9] ARM: OMAP3: define cpuidle statically   Jean Pihet
• [RFC][PATCH 4/9] ARM: OMAP3: define cpuidle statically   Jean Pihet
• [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp   Laurent Pinchart
• linux-next: manual merge of the arm-soc tree with Linus' tree   Laurent Pinchart
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Nicolas Pitre
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Nicolas Pitre
• [RFC PATCH 0/2] ARM: assembler: Add uniform assembler framework   Nicolas Pitre
• [RFC PATCH 0/2] ARM: assembler: Add uniform assembler framework   Nicolas Pitre
• [PULL REQUEST v2] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Nicolas Pitre
• [PATCH v3 11/30] ARM: orion5x: clean-up mach/io.h   Nicolas Pitre
• [PATCH v3 02/30] ARM: provide runtime hook for ioremap/iounmap   Nicolas Pitre
• [PATCH v3 15/30] ARM: dove: add explicit include of dove.h to addr-map.c   Nicolas Pitre
• [PATCH v3 17/30] ARM: make mach/io.h include optional   Nicolas Pitre
• [PATCH v3 18/30] ARM: remove bunch of now unused mach/io.h files   Nicolas Pitre
• [PATCH v3 21/30] ARM: Add fixed PCI i/o mapping   Nicolas Pitre
• [PATCH v3 27/30] ARM: kirkwood: use fixed PCI i/o mapping   Nicolas Pitre
• [PATCH v3 26/30] ARM: dove: use fixed PCI i/o mapping   Nicolas Pitre
• [PATCH v3 30/30] ARM: orion5x: use fixed PCI i/o mapping   Nicolas Pitre
• [PATCH v2 19/28] ARM: Add fixed PCI i/o mapping   Nicolas Pitre
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Nicolas Pitre
• [PULL REQUEST v2] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Nicolas Pitre
• [PATCH v3 02/30] ARM: provide runtime hook for ioremap/iounmap   Nicolas Pitre
• [PULL REQUEST v2] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt   Nicolas Pitre
• [PATCH] ARM: remove ixp2000 platform   Nicolas Pitre
• [PATCH] ARM: remove ixp2000 platform   Nicolas Pitre
• [PATCH v4 1/4] ARM: provide runtime hook for ioremap/iounmap   Nicolas Pitre
• [PATCH v3 02/30] ARM: provide runtime hook for ioremap/iounmap   Nicolas Pitre
• [RFC 00/14] Generic clk for Orion platforms.   Nicolas Pitre
• [PATCH 6/6] ARM: mm: truncate memory banks to fit in 4GB space for classic MMU   Nicolas Pitre
• [PATCH v5 1/7] ARM: provide runtime hook for ioremap/iounmap   Nicolas Pitre
• [PATCH v5 7/7] ARM: remove compile time __arch_ioremap/__arch_iounmap   Nicolas Pitre
• [PATCH v5 6/7] ARM: ebsa110: use runtime ioremap hook   Nicolas Pitre
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Nicolas Pitre
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Nicolas Pitre
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Nicolas Pitre
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Nicolas Pitre
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Nicolas Pitre
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Nicolas Pitre
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Nicolas Pitre
• [PATCH v3 1/5] ARM: protect usage of cr_alignment by #ifdef CONFIG_CPU_CP15   Nicolas Pitre
• [PATCH v3 2/5] ARM: Add a printk loglevel modifier   Nicolas Pitre
• [PATCH v3 3/5] ARM: force branch instructions to use long distance encoding   Nicolas Pitre
• [PATCH v3 1/5] ARM: protect usage of cr_alignment by #ifdef CONFIG_CPU_CP15   Nicolas Pitre
• [PATCH 1/4] ARM: opcodes: Don't define the thumb32 byteswapping macros for BE32   Nicolas Pitre
• [PATCH 2/4] ARM: opcodes: Make opcode byteswapping macros assembly-compatible   Nicolas Pitre
• [PATCH 3/4] ARM: opcodes: Add helpers for emitting custom opcodes   Nicolas Pitre
• [PATCH 4/4] ARM: opcodes: Opcode definitions for the Virtualization Extensions   Nicolas Pitre
• [PATCH] of: Add generic device tree DMA helpers   Nicolas Pitre
• [PATCH 0/2] improve debugability of early boot of the kernel   Nicolas Pitre
• [PATCH 1/2] DEBUG_LL: limit early mapping to the minimum   Nicolas Pitre
• [PATCH 2/2] remove the debugging restrictions in devicemaps_init()   Nicolas Pitre
• [PATCH] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Nicolas Pitre
• [PATCH v7 1/3] Documentation: common clk API   Nicolas Pitre
• [PATCH] ARM: lib: use LDRD/STRD for data copy   Nicolas Pitre
• [PATCH] ARM: lib: use LDRD/STRD for data copy   Nicolas Pitre
• [PATCH v8 0/8] Consolidate cpuidle functionality   Nicolas Pitre
• [PATCH v8 0/8] Consolidate cpuidle functionality   Nicolas Pitre
• [PATCH 1/2] ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol   Nicolas Pitre
• [PATCH 2/2] ARM: pxa: use commom IOMEM definiton   Nicolas Pitre
• [PATCH v7 1/3] Documentation: common clk API   Nicolas Pitre
• [PATCH v7 1/3] Documentation: common clk API   Nicolas Pitre
• ioremap to a specific virtual address   Nicolas Pitre
• ioremap to a specific virtual address   Nicolas Pitre
• [PATCH 1/2] ARM: lib: Add optimized memcpy with 64 byte pld size   Nicolas Pitre
• [PATCH 1/2] ARM: lib: Add optimized memcpy with 64 byte pld size   Nicolas Pitre
• [PATCH] ARM: test for PMU feature on v7 (v2 with typo fix)   Nicolas Pitre
• [PATCH 0/4] memcpy optimized with strd/ldrd   Nicolas Pitre
• [PATCH 1/4] ARM: copy_template.S: move some registers around   Nicolas Pitre
• [PATCH 2/4] ARM: copy_template.S: rework the unaligned copy loop   Nicolas Pitre
• [PATCH 3/4] ARM: copy_template.S: enforce contigous register set with memory accessors   Nicolas Pitre
• [PATCH 4/4] ARM: option to select LDRD/STRD optimized memory copy   Nicolas Pitre
• [PATCH 0/4] memcpy optimized with strd/ldrd   Nicolas Pitre
• [PATCH] ARM: test for PMU feature on v7 (v2 with typo fix)   Nicolas Pitre
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Nicolas Pitre
• error: 'SEGMENT_SIZE' undeclared with arm-eabi-gcc toolchain   Nicolas Pitre
• ioremap to a specific virtual address   Nicolas Pitre
• [PATCH 0/2] Omap keypad cleanup and omap5 support   Sourav Poddar
• [PATCH 1/2] input: keypad: move platform_data to <linux/platform_data>   Sourav Poddar
• [PATCH 2/2] Input: omap-keypad: dynamically handle register offsets   Sourav Poddar
• [PATCH 0/2] Omap keypad cleanup and omap5 support   Sourav Poddar
• [PATCH 1/2] input: keypad: move platform_data to <linux/platform_data>   Sourav Poddar
• [PATCH 2/2] Input: omap-keypad: dynamically handle register offsets   Sourav Poddar
• [PATCHv2 2/2] Input: omap-keypad: dynamically handle register offsets   Sourav Poddar
• [PATCH] ARM: at91: add support for Telit GE863-PRO3 Evaluation Kit   Fabio Porcedda
• [PATCH] ARM: at91: add support for Telit GE863-PRO3 Evaluation Kit   Fabio Porcedda
• [PATCH] of: Add generic device tree DMA helpers   Matt Porter
• DaVinci unbanked GPIO IRQs broken   Jon Povey
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Rafal Prylowski
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Rafal Prylowski
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Rafal Prylowski
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Rafal Prylowski
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Rafal Prylowski
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Rafal Prylowski
• [PATCH 0/3] Add PATA host controller support for Cirrus Logic EP93xx CPU   Rafal Prylowski
• [PATCH 1/3] PATA host controller driver for ep93xx   Rafal Prylowski
• [PATCH 2/3] ep93xx: IDE driver platform support code   Rafal Prylowski
• [PATCH 3/3] ep93xx: Add IDE support to edb93xx boards   Rafal Prylowski
• [PATCH 1/3] PATA host controller driver for ep93xx   Rafal Prylowski
• [PATCH 1/3] PATA host controller driver for ep93xx   Rafal Prylowski
• [PATCH 2/3] ep93xx: IDE driver platform support code   Rafal Prylowski
• [PATCH 3/3] ep93xx: Add IDE support to edb93xx boards   Rafal Prylowski
• [PATCH 1/3] PATA host controller driver for ep93xx   Rafal Prylowski
• [PATCH 1/3] led-class: change back LEDS_CLASS to tristate instead of bool   Richard Purdie
• [PATCH] omap3_beagle: Init only uart3 used for console   Raja, Govindraj
• [PATCH] omap3_beagle: Init only uart3 used for console   Raja, Govindraj
• [PATCH] omap3_beagle: Init only uart3 used for console   Raja, Govindraj
• [RFC PATCH] OMAP: UART: Enable tx wakeup bit in wer   Raja, Govindraj
• [PATCH] omap_hwmod: Allow io_ring wakeup configuration for all modules.   Raja, Govindraj
• [RFC PATCH] OMAP: UART: Enable tx wakeup bit in wer   Raja, Govindraj
• [PATCH] omap_hwmod: Allow io_ring wakeup configuration for all modules.   Raja, Govindraj
• [PATCH 0/3] OMAP2+: UART: Enable tx wakeup + remove cpu checks   Raja, Govindraj
• [PATCH 0/3] OMAP2+: UART: Enable tx wakeup + remove cpu checks   Raja, Govindraj
• [PATCH 1/3] OMAP2+: UART: Remove cpu checks for populating errata flags   Raja, Govindraj
• [PATCH 1/3] OMAP2+: UART: Remove cpu checks for populating errata flags   Raja, Govindraj
• [PATCH v2 5/8] ARM: OMAP2+: hwmod: ensure that SYSCONFIG bits are reprogrammed after a reset   Ramirez Luna, Omar
• [PATCH v2 5/8] ARM: OMAP2+: hwmod: ensure that SYSCONFIG bits are reprogrammed after a reset   Ramirez Luna, Omar
• i.MX28 die temperature   Randle, Bill
• i.MX28 die temperature   Randle, Bill
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Krishna Reddy
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Krishna Reddy
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Krishna Reddy
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Krishna Reddy
• [PATCH v3 22/30] ARM: tegra: use fixed PCI i/o mapping   Thierry Reding
• [PATCH v3 02/10] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH v3 06/10] pwm: Add NVIDIA Tegra SoC support   Thierry Reding
• [PATCH v3 04/10] arm/tegra: Fix PWM clock programming   Thierry Reding
• [PATCH v3 07/10] arm/tegra: Add PWFM controller device tree probing   Thierry Reding
• [PATCH v3 06/10] pwm: Add NVIDIA Tegra SoC support   Thierry Reding
• [PATCH v3 07/10] arm/tegra: Add PWFM controller device tree probing   Thierry Reding
• [PATCH/RFC 2/2] arm/tegra: add timeout to PCIe PLL lock detection loop   Thierry Reding
• [PATCH v3 02/10] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH/RFC 2/2] arm/tegra: add timeout to PCIe PLL lock detection loop   Thierry Reding
• [PATCH 00/11] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH 01/11] drivercore: Add driver probe deferral mechanism   Thierry Reding
• [PATCH 02/11] regulator: Support driver probe deferral   Thierry Reding
• [PATCH 03/11] regulator: fixed: Support driver probe deferral   Thierry Reding
• [PATCH 04/11] regulator: tps6586x: fix typo in debug message   Thierry Reding
• [PATCH 05/11] tps6586x: Add device-tree support   Thierry Reding
• [PATCH 06/11] PCI: Keep pci_fixup_irqs() around after init   Thierry Reding
• [PATCH 07/11] ARM: pci: Keep pci_common_init() around after init   Thierry Reding
• [PATCH 08/11] ARM: tegra: Move tegra_pcie_xclk_clamp() to PMC   Thierry Reding
• [PATCH 09/11] ARM: tegra: Rewrite PCIe support as a driver   Thierry Reding
• [PATCH 10/11] ARM: tegra: pcie: Add MSI support   Thierry Reding
• [PATCH 11/11] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH 05/11] tps6586x: Add device-tree support   Thierry Reding
• [PATCH 00/11] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH 05/11] tps6586x: Add device-tree support   Thierry Reding
• [PATCH 06/11] PCI: Keep pci_fixup_irqs() around after init   Thierry Reding
• [PATCH 11/11] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH 09/11] ARM: tegra: Rewrite PCIe support as a driver   Thierry Reding
• [PATCH 10/11] ARM: tegra: pcie: Add MSI support   Thierry Reding
• [PATCH 05/11] tps6586x: Add device-tree support   Thierry Reding
• [PATCH 10/11] ARM: tegra: pcie: Add MSI support   Thierry Reding
• [PATCH 11/11] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH 11/11] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH 2/7] of: add clock providers   Thierry Reding
• [PATCH v4 00/10] Add PWM framework and device tree support.   Thierry Reding
• [PATCH v4 01/10] PWM: add pwm framework support   Thierry Reding
• [PATCH v4 02/10] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH v4 03/10] pwm: Add device tree support   Thierry Reding
• [PATCH v4 04/10] ARM: tegra: Fix PWM clock programming   Thierry Reding
• [PATCH v4 05/10] ARM: tegra: Provide clock for only one PWM controller   Thierry Reding
• [PATCH v4 06/10] pwm: Add NVIDIA Tegra SoC support   Thierry Reding
• [PATCH v4 07/10] pwm: tegra: Add device tree support   Thierry Reding
• [PATCH v4 08/10] pwm: Add Blackfin support   Thierry Reding
• [PATCH v4 09/10] pwm: Add PXA support   Thierry Reding
• [PATCH v4 10/10] pwm-backlight: Add rudimentary device tree support   Thierry Reding
• [PATCH v4 03/10] pwm: Add device tree support   Thierry Reding
• [PATCH v4 02/10] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH v4 01/10] PWM: add pwm framework support   Thierry Reding
• [PATCH v4 00/10] Add PWM framework and device tree support.   Thierry Reding
• [PATCH v4 09/10] pwm: Add PXA support   Thierry Reding
• [PATCH v4 09/10] pwm: Add PXA support   Thierry Reding
• [PATCH] of: Add generic device tree DMA helpers   Thierry Reding
• [PATCH v4 01/10] PWM: add pwm framework support   Thierry Reding
• [PATCH 1/3] ARM i.MX: Move i.MX pwm driver to pwm framework   Thierry Reding
• [PATCH v4 06/10] pwm: Add NVIDIA Tegra SoC support   Thierry Reding
• [PATCH v4 09/10] pwm: Add PXA support   Thierry Reding
• [PATCH] of: Add generic device tree DMA helpers   Thierry Reding
• [PATCH] ARM: tegra: Include assembler.h in sleep.S to fix build break   Thierry Reding
• [PATCH v4 03/10] pwm: Add device tree support   Thierry Reding
• [PATCH v4 01/10] PWM: add pwm framework support   Thierry Reding
• [PATCH v4 10/10] pwm-backlight: Add rudimentary device tree support   Thierry Reding
• [PATCH v4 05/10] ARM: tegra: Provide clock for only one PWM controller   Thierry Reding
• [PATCH v4 07/10] pwm: tegra: Add device tree support   Thierry Reding
• [PATCH v4 10/10] pwm-backlight: Add rudimentary device tree support   Thierry Reding
• [PATCH v4 07/10] pwm: tegra: Add device tree support   Thierry Reding
• uImage with integrated dtb file   Thierry Reding
• [PATCH v5 00/16] Add PWM framework and device tree support   Thierry Reding
• [PATCH v5 01/16] pwm: Add PWM framework support   Thierry Reding
• [PATCH v5 02/16] pwm: Allow chips to support multiple PWMs   Thierry Reding
• [PATCH v5 03/16] pwm: Add debugfs interface   Thierry Reding
• [PATCH v5 04/16] pwm: Add table-based lookup for static mappings   Thierry Reding
• [PATCH v5 05/16] pwm: Add device tree support   Thierry Reding
• [PATCH v5 06/16] ARM: tegra: Fix PWM clock programming   Thierry Reding
• [PATCH v5 07/16] ARM: tegra: Provide clock for only one PWM controller   Thierry Reding
• [PATCH v5 08/16] pwm: Add NVIDIA Tegra SoC support   Thierry Reding
• [PATCH v5 09/16] pwm: tegra: Add device tree support   Thierry Reding
• [PATCH v5 10/16] pwm: Move Blackfin PWM driver to PWM framework   Thierry Reding
• [PATCH v5 11/16] pwm: Move PXA PWM driver to PWM framework   Thierry Reding
• [PATCH v5 12/16] ARM i.MX: Move i.MX pwm driver to pwm framework   Thierry Reding
• [PATCH v5 13/16] ARM Samsung: Move s3c pwm driver to pwm framework   Thierry Reding
• [PATCH v5 14/16] ARM vt8500: Move vt8500 pwm driver to pwm framework   Thierry Reding
• [PATCH v5 15/16] pwm-backlight: Add rudimentary device tree support   Thierry Reding
• [PATCH v5 16/16] pwm: Take over maintainership of the PWM subsystem   Thierry Reding
• [PATCH v5 04/16] pwm: Add table-based lookup for static mappings   Thierry Reding
• [PATCH v5 05/16] pwm: Add device tree support   Thierry Reding
• [PATCH v5 04/16] pwm: Add table-based lookup for static mappings   Thierry Reding
• [PATCH v5 04/16] pwm: Add table-based lookup for static mappings   Thierry Reding
• mfd: mc13xxx: add I2C support, V2   Marc Reilly
• [PATCH v2 1/3] mfd: mc13xxx-core: Prepare for separate spi and i2c backends.   Marc Reilly
• [PATCH v2 2/3] mfd: mc13xxx-core: Move spi specific code into separate module.   Marc Reilly
• [PATCH v2 3/3] mfd: mc13xxx-core: Add i2c driver   Marc Reilly
• mc13xxx: add I2C support (now with regmap), V3   Marc Reilly
• [PATCH v3 1/6] regmap: add support for 7_25 format   Marc Reilly
• [PATCH v3 2/6] regmap: Add support for device with 24 data bits.   Marc Reilly
• [PATCH v3 3/6] mfd: mc13xxx-core: Prepare for separate spi and i2c backends.   Marc Reilly
• [PATCH v3 4/6] mfd: mc13xxx-core: use regmap for register access   Marc Reilly
• [PATCH v3 5/6] mfd: mc13xxx-core: Move spi specific code into separate module.   Marc Reilly
• [PATCH v3 6/6] mfd: mc13xxx: Add i2c driver   Marc Reilly
• mc13xxx: add I2C support (now with regmap), V4   Marc Reilly
• [PATCH v4 1/4] mfd: mc13xxx-core: Prepare for separate spi and i2c backends.   Marc Reilly
• [PATCH v4 2/4] mfd: mc13xxx-core: use regmap for register access   Marc Reilly
• [PATCH v4 3/4] mfd: mc13xxx-core: Move spi specific code into separate module.   Marc Reilly
• [PATCH v4 4/4] mfd: mc13xxx: Add i2c driver   Marc Reilly
• [PATCH] regulator: i.MX35-PDK Add regulator support   Marc Reilly
• [PATCH] regulator: i.MX35-PDK Add regulator support   Marc Reilly
• [PATCH] mfd: mc13xxx: add I2C support fix building for v3.4   Marc Reilly
• [MX25][MMC] mmc esdhc failure in 3.3   Zhu Richard-R65037
• [PATCH 10/10] oom: Make find_lock_task_mm() sparse-aware   David Rientjes
• IIO irq allocation fails on AT91SAM9G45   Maxime Ripard
• [PATCH] ARM: OMAP: fix iommu, not mailbox   Joerg Roedel
• [PATCH v11 3/3] iommu/exynos: Add iommu driver for Exynos Platforms   Joerg Roedel
• [PATCH v11 3/3] iommu/exynos: Add iommu driver for Exynos Platforms   Joerg Roedel
• [PATCH v12 2/3] ARM: EXYNOS: Change System MMU platform device definitions   Joerg Roedel
• [PATCH v12 2/3] ARM: EXYNOS: Change System MMU platform device definitions   Joerg Roedel
• [PATCH] stmmac: Add device-tree support   Stefan Roese
• [PATCH] stmmac: Add device-tree support   Stefan Roese
• [PATCH] stmmac: Add device-tree support   Stefan Roese
• [PATCH] stmmac: Add device-tree support   Stefan Roese
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH] stmmac: Add device-tree support   Stefan Roese
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH v2] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH v2] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH v2] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH v2] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH v3] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH v4] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH v4] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH v4] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH v4] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH v4] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH v5] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   Stefan Roese
• [PATCH] ARM: SPEAr600: Change FSMC and SMI clock names   Stefan Roese
• linux-next: manual merge of the arm-soc tree with the gpio tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound-asoc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound-asoc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with Linus' tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the tree   Stephen Rothwell
• [git pull] Consolidate cpuidle functionality   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the regulator tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the regulator tree   Stephen Rothwell
• linux-next: manual merge of the cpuidle-cons tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the cpuidle-cons tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound-asoc tree   Stephen Rothwell
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Stephen Rothwell
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Stephen Rothwell
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with Linus' tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• Conflict between Versatile Express DT conversion and local timer updates   Stephen Rothwell
• Conflict between Versatile Express DT conversion and local timer updates   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the s5p tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the l2-mtd tree   Stephen Rothwell
• linux-next: build warning after merge of the arm-soc tree   Stephen Rothwell
• [PATCH 0/4] Initial steps to compile AMBA for x86   Alessandro Rubini
• [PATCH 1/4] x86: add NO_IRQ macro   Alessandro Rubini
• [PATCH 2/4] sizes.h: move from asm-generic to <linux/sizes.h>   Alessandro Rubini
• [PATCH 3/4] amba: use the new linux/sizes.h   Alessandro Rubini
• [PATCH 4/4] ARM: use the new linux/sizes.h   Alessandro Rubini
• [PATCH] amba-pl011: fix panic introduced by "clear pending interrupts"   Alessandro Rubini
• [PATCH] ARM: lib: use LDRD/STRD for data copy   Måns Rullgård
• [PATCH] ARM: lib: use LDRD/STRD for data copy   Måns Rullgård
• [PATCH 6/8] ARM: KVM: table-driven coprocessor emulation.   Rusty Russell
• [PATCH 4/8] ARM: KVM: split cp15 mrc/mcr and mrrc/mcrr handling.   Rusty Russell
• [PATCH 7/8] ARM: KVM: guest_didnt_mean_it()   Rusty Russell
• [PATCH 2/8] ARM: KVM: neaten offset calculations.   Rusty Russell
• [PATCH 3/8] ARM: KVM: make struct coproc_params arg const.   Rusty Russell
• [PATCH 5/8] ARM: KVM: make emulation functions return bool.   Rusty Russell
• [PATCH 8/8] ARM: KVM: don't BUG() if guest executes smc.   Rusty Russell
• [PATCH 1/8] ARM: KVM: Fix missing clobber (causes host oops on UP)   Rusty Russell
• [PATCH 1/8] ARM: KVM: Fix missing clobber (causes host oops on UP)   Rusty Russell
• [PATCH] ARM: test for PMU feature on v7.   Rusty Russell
• [PATCH] ARM: test for PMU feature on v7 (v2 with typo fix)   Rusty Russell
• [PATCH] ARM: test for PMU feature on v7 (v2 with typo fix)   Rusty Russell
• [PATCH] ARM: test for PMU feature on v7 (v2 with typo fix)   Rusty Russell
• [PATCH 0/4] mc13783 sound support   Philippe Rétornaz
• [PATCH 1/4] add a mc13783 codec driver   Philippe Rétornaz
• [PATCH 2/4] Add imx3sound sound support.   Philippe Rétornaz
• [PATCH 3/4] mx31moboard: Add ssi configuration   Philippe Rétornaz
• [PATCH 4/4] imx31pdk: Add sound support   Philippe Rétornaz
• [PATCH 1/4] add a mc13783 codec driver   Philippe Rétornaz
• [PATCH 2/4] Add imx3sound sound support.   Philippe Rétornaz
• [PATCH v5 2/8] ASoC: imx: merge sound/soc/imx into sound/soc/fsl   Philippe Rétornaz
• [PATCH V2 1/1] mmc: start removing enable / disable API   S, Venkatraman
• [PATCH] ARM: OMAP: hsmmc: add max_freq field   S, Venkatraman
• [PATCH] ARM: OMAP: hsmmc: add max_freq field   S, Venkatraman
• Occasional crashes in suspend-resume with MMC transactions   S, Venkatraman
• Occasional crashes in suspend-resume with MMC transactions   S, Venkatraman
• Occasional crashes in suspend-resume with MMC transactions   S, Venkatraman
• mxs auart driver problems   Zach Sadecki
• mxs auart driver problems   Zach Sadecki
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Zach Sadecki
• [PATCH] OMAP3: OPP: Test for IVA subsystem before attempting to add IVA OPP   Steve Sakoman
• [PATCH 05/38] Disintegrate asm/system.h for ARM [ver #3]   Mark Salter
• [PATCH] Improve build environment isolation   Vincent Sanders
• [PATCH 00/15] watchdog/mpcore: updates & fixes   Wolfram Sang
• [PATCH 00/15] watchdog/mpcore: updates & fixes   Wolfram Sang
• [PATCH] watchdog/coh901327: convert to use watchdog core   Wolfram Sang
• [PATCH 0/3] introduce stmp-style devices   Wolfram Sang
• [PATCH 1/3] drivers: base: add support for stmp-style devices   Wolfram Sang
• [PATCH 2/3] i2c: mxs: use global reset function   Wolfram Sang
• [PATCH 3/3] rtc: stmp3xxx: use global stmp_device functionality   Wolfram Sang
• [PATCH 1/3] drivers: base: add support for stmp-style devices   Wolfram Sang
• [PATCH v4] USB: Support for LPC32xx SoC   Wolfram Sang
• [PATCH 0/3] introduce stmp-style devices   Wolfram Sang
• [PATCH v5 3/3] USB: ohci-nxp: Support for LPC32xx   Wolfram Sang
• [PATCH v5 3/3] USB: ohci-nxp: Support for LPC32xx   Wolfram Sang
• [PATCH v5 3/3] USB: ohci-nxp: Support for LPC32xx   Wolfram Sang
• mfd: mc13xxx: add I2C support, V2   Wolfram Sang
• [PATCH] mtd/gpmi : fix the wrong DMA command.   Wolfram Sang
• iMX53 and MMC_CAP_SDIO_IRQ   Wolfram Sang
• iMX53 and MMC_CAP_SDIO_IRQ   Wolfram Sang
• [PATCH v7 0/4] USB: OHCI-HCD: Support for LPC32xx   Wolfram Sang
• [PATCH v7 4/4] USB: ohci-nxp: Remove i2c_write(), use smbus   Wolfram Sang
• [PATCH 1/5 v3] i2c/gpio: add DT support   Wolfram Sang
• [PATCH 1/5 v3] i2c/gpio: add DT support   Wolfram Sang
• [PATCH 1/5 v4] i2c/gpio: add DT support   Wolfram Sang
• [PATCH 1/5 v4] i2c/gpio: add DT support   Wolfram Sang
• [PATCH 1/1] net: phylib: remove the length limitation of mii bus id   Wolfram Sang
• [PATCH V2 0/3] introduce stmp-style devices   Wolfram Sang
• [PATCH V2 1/3] lib: add support for stmp-style devices   Wolfram Sang
• [PATCH 2/3] i2c: mxs: use global reset function   Wolfram Sang
• [PATCH 3/3] rtc: stmp3xxx: use global stmp_device functionality   Wolfram Sang
• [MX25][MMC] mmc esdhc failure in 3.3   Wolfram Sang
• [MX25][MMC] mmc esdhc failure in 3.3   Wolfram Sang
• [MX25][MMC] mmc esdhc failure in 3.3   Wolfram Sang
• [MX25][MMC] mmc esdhc failure in 3.3   Wolfram Sang
• [PATCH V2 1/3] lib: add support for stmp-style devices   Wolfram Sang
• [PATCH v2] ARM: OMAP: WiLink platform data for the PandaBoard   Pavan Savoy
• [PATCH] pxafb: do console locking before calling fb_blank()   Florian Tobias Schandinat
• [PATCH] MAINTAINERS: add entry for exynos mipi display drivers   Florian Tobias Schandinat
• [PATCH] ARM: fix lcd power build failure in collie_defconfig   Florian Tobias Schandinat
• [PATCH] ARM: at91: Ethernut 5 board support   Tim Schendekehl
• [PATCH v4 4/4] mfd: mc13xxx: Add i2c driver   Oskar Schirmer
• [PATCH v3 0/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Heiko Schocher
• [PATCH v3 1/7] ARM: davinci, intc: Add OF support for TI interrupt controller   Heiko Schocher
• [PATCH v3 2/7] ARM: davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [PATCH v3 3/7] ARM: davinci: mux: add OF support   Heiko Schocher
• [PATCH v3 4/7] ARM: davinci: net: davinci_emac: add OF support   Heiko Schocher
• [PATCH v3 5/7] ARM: davinci: i2c: add OF support   Heiko Schocher
• [PATCH v3 6/7] ARM: mtd: nand: davinci: add OF support for davinci nand controller   Heiko Schocher
• [PATCH v3 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Heiko Schocher
• Regression in 3.2.9 for omap-serial (at least)   Enrico Scholz
• [PATCH] gpio/mxs: support irqs triggered by both edges   Enrico Scholz
• [PATCH] gpio/mxs: support irqs triggered by both edges   Enrico Scholz
• [PATCH v3 00/10] Add tegra30 support for secondary cores   Peter De Schrijver
• [PATCH v3 00/10] Add tegra30 support for secondary cores   Peter De Schrijver
• [PATCH] OMAP3: OPP: Test for IVA subsystem before attempting to add IVA OPP   Maximilian Schwerin
• AW: [PATCH] OMAP3: OPP: Test for IVA subsystem before attempting to add IVA OPP   Maximilian Schwerin
• AW: [PATCH] OMAP3: OPP: Test for IVA subsystem before attempting to add IVA OPP   Maximilian Schwerin
• [PATCH 5/7] USB: r8a66597-hcd: restore big-endian operation.   Thomas Schwinge
• [PATCH] efikamx: match machine descriptions with legacy   Matt Sealey
• [PATCH v2 01/17] ASoC: imx: move eukrea audmux call into ASoC machine driver   Matt Sealey
• [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver   Matt Sealey
• [PATCH v6 3/3] clk: basic clock hardware types   Matt Sealey
• [PATCH v6 0/2] patch set about the MXS-DMA   Huang Shijie
• [PATCH] mtd/gpmi : move the __mxs_setl()/__mxs_clrl() to gpmi-lib.c   Huang Shijie
• [PATCH] mtd/gpmi : move the __mxs_setl()/__mxs_clrl() to gpmi-lib.c   Huang Shijie
• [PATCH] ARM: move mem_type's real definition to asm/mach/map.h   Huang Shijie
• [PATCH 1/3] drivers: base: add support for stmp-style devices   Huang Shijie
• [PATCH] mtd/gpmi : fix the wrong DMA command.   Huang Shijie
• [PATCH] mtd/gpmi : fix the wrong DMA command.   Huang Shijie
• [PATCH v1 4/5] dma: mxs-dma: add dt probe support   Huang Shijie
• [PATCH v1 5/5] ARM: mxs: add mxs dma dt support   Huang Shijie
• [PATCH v1 5/5] ARM: mxs: add mxs dma dt support   Huang Shijie
• [PATCH V2 1/3] lib: add support for stmp-style devices   Huang Shijie
• [PATCH] mtd/gpmi : do not include the mxs.h   Huang Shijie
• Bug in v7_coherent_kern_range() ?   Huang Shijie
• Randconfig module build error with OMAP4_ERRATA_I688   Shilimkar, Santosh
• Randconfig module build error with OMAP4_ERRATA_I688   Shilimkar, Santosh
• [PATCH] OMAP3+: PM: VP: fix integer truncation error   Shilimkar, Santosh
• [PATCH v3 02/13] gpio/omap: fix wakeup_en register update in _set_gpio_wakeup()   Santosh Shilimkar
• [PATCH v3 08/13] gpio/omap: remove redundant decoding of gpio offset   Santosh Shilimkar
• [PATCH v3 09/13] gpio/omap: remove suspend/resume callbacks   Santosh Shilimkar
• [PATCH v3 10/13] gpio/omap: fix missing dataout context save in _set_gpio_dataout_reg   Santosh Shilimkar
• [PATCH v3 11/13] gpio/omap: fix dataout register overwrite in _set_gpio_dataout_*   Santosh Shilimkar
• [PATCH v3 12/13] gpio/omap: fix incorrect context restore logic in omap_gpio_runtime_resume   Santosh Shilimkar
• [PATCH v3 13/13] gpio/omap: fix incorrect update to context.irqenable1   Santosh Shilimkar
• [PATCH v3 12/13] gpio/omap: fix incorrect context restore logic in omap_gpio_runtime_resume   Shilimkar, Santosh
• [PATCH 0/2] ARM: OMAP4: powerdomain: Misc powerdomain fix and associated cleanup   Santosh Shilimkar
• [PATCH 1/2] ARM: OMAP: powerdomain: Wait for powerdomain transition in pwrdm_state_switch()   Santosh Shilimkar
• [PATCH 2/2] ARM: OMAP: powerdomain: Get rid off duplicate pwrdm_clkdm_state_switch() API   Santosh Shilimkar
• [PATCH 0/2] ARM: OMAP4: powerdomain: Misc powerdomain fix and associated cleanup   Shilimkar, Santosh
• [PATCH] ARM: OMAP4: Workaround the OCP synchronisation issue with 32K synctimer.   Santosh Shilimkar
• [PATCH 2/5] ARM: OMAP2+: add includes for missing prototypes   Shilimkar, Santosh
• [PATCH 1/5] ARM: OMAP2+: declare file-local functions as static   Shilimkar, Santosh
• [PATCH] ARM: OMAP4: Workaround the OCP synchronisation issue with 32K synctimer.   Santosh Shilimkar
• [PATCH] ARM: OMAP4: Workaround the OCP synchronisation issue with 32K synctimer.   Shilimkar, Santosh
• [PATCHv2 3/5] cpuidle: add support for states that affect multiple cpus   Santosh Shilimkar
• [PATCHv2 3/5] cpuidle: add support for states that affect multiple cpus   Shilimkar, Santosh
• [PATCH v4 0/7] Add TI EMIF SDRAM controller driver   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Santosh Shilimkar
• [PATCH v2 0/4] ARM: OMAP: boards: changes to support dynamic irq alloc   Shilimkar, Santosh
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Shilimkar, Santosh
• [RFC][PATCH 1/7] ARM: OMAP4: cpuidle - Remove unused valid field   Shilimkar, Santosh
• [RFC][PATCH 2/7] ARM: OMAP4: cpuidle - Declare the states with the driver declaration   Santosh Shilimkar
• [RFC][PATCH 4/7] ARM: OMAP4: cpuidle - fix static omap4_idle_data declaration   Santosh Shilimkar
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Santosh Shilimkar
• [RFC][PATCH 1/7] ARM: OMAP4: cpuidle - Remove unused valid field   Santosh Shilimkar
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Santosh Shilimkar
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Shilimkar, Santosh
• [RFC][PATCH 0/7] OMAP4 cpuidle cleanup   Shilimkar, Santosh
• [RFC][PATCH 0/5] Convert GPMC to driver   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Santosh Shilimkar
• [PATCH] ARM: OMAP2+: Fix omap2+ build error.   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Santosh Shilimkar
• [PATCHv2 0/5] coupled cpuidle state support   Santosh Shilimkar
• [PATCH 0/3] OMAP4: CPUidle: Add coupled idle support   Santosh Shilimkar
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Santosh Shilimkar
• [PATCH 2/3] ARM: OMAP4: cpuidle: Use coupled cpuidle states to implement SMP cpuidle.   Santosh Shilimkar
• [PATCH 3/3] ARM: OMAP4: CPUidle: add synchronization for coupled idle states   Santosh Shilimkar
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Shilimkar, Santosh
• [PATCH 2/3] ARM: OMAP4: cpuidle: Use coupled cpuidle states to implement SMP cpuidle.   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Shilimkar, Santosh
• [PATCH] ARM: clps711x: serial driver hungs are a result of call disable_irq within ISR   Alexander Shiyan
• [PATCH] iop-adma: Corrected array overflow in RAID6 Xscale(R) test.   Sergei Shtylyov
• [PATCH 4/8] ARM: tegra: build localtimer support only when needed   Sergei Shtylyov
• [PATCH 11/12] mfd: twl4030-irq: Return twl6030_mmc_card_detect IRQ for board setup   Sergei Shtylyov
• [PATCH 6/6] ARM: mm: truncate memory banks to fit in 4GB space for classic MMU   Sergei Shtylyov
• [PATCH] pinctrl: include machine header to core.h   Sergei Shtylyov
• [PATCH 10/15] watchdog/mpcore_wdt: Add support for dev_pm_ops interface   Sergei Shtylyov
• [PATCH 12/15] watchdog/mpcore_wdt: Add support for WDIOF_CARDRESET   Sergei Shtylyov
• [PATCH 5/7] USB: r8a66597-hcd: restore big-endian operation.   Sergei Shtylyov
• [PATCH] arm:da850: register musb device   Sergei Shtylyov
• [PATCH] arm:da850: register musb device   Sergei Shtylyov
• [PATCH 2/2] arm: omap3: pm34xx.c: Replace printk() with appropriate pr_*()   Sergei Shtylyov
• Link for the latest patches of AHCI   Sergei Shtylyov
• [PATCH 1/3] mmc: atmel-mci: correct data timeout computation   Sergei Shtylyov
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Sergei Shtylyov
• [PATCH] amba-pl011: fix panic introduced by "clear pending interrupts"   Sergei Shtylyov
• [PATCHv2 01/14] common: dma-mapping: introduce alloc_attrs and free_attrs methods   Sergei Shtylyov
• [PATCH 4/4] Input: pxa27x_keypad add choice to set direct_key_mask   Sergei Shtylyov
• [PATCH] ARM: S3C24XX: fix missing common.h in mach-s3c24xx/   Sergei Shtylyov
• [PATCH] ARM: include linux/bug.h in insn.c   Sergei Shtylyov
• [PATCH] ARM: at91: Export at91_ramc_base   Sergei Shtylyov
• [PATCH] ARM: at91: include newly created system_misc.h file   Sergei Shtylyov
• [PATCH V2 4/4] Input: pxa27x_keypad add choice to set direct_key_mask   Sergei Shtylyov
• [PATCH V2 1/4] Input: pxa27x_keypad keep clock on as wakeup source   Sergei Shtylyov
• [PATCH 03/12] ARM: at91/USB host: specify and handle properly vbus_pin_active_low   Sergei Shtylyov
• [PATCH] ARM: OMAP: fix section mismatches in usb-host.c   Shubhrajyoti
• [PATCH v8] ARM : mx35: 3ds-board: add framebuffer device   Baruch Siach
• [PATCH 3/3] i.MX27: visstrim_m10: Remove use of MX2_CAMERA_SWAP16.   Baruch Siach
• remoteproc: Load coprocessor code to the specific main memory location   Michal Simek
• [PATCH 1/7] remoteproc: resource table overhaul   Michal Simek
• [PATCH] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Michal Simek
• [PATCH 1/7] remoteproc: resource table overhaul   Michal Simek
• [PATCH] ARM: EXYNOS4: Support Suspend/Resume for EXYNOS4412   Inderpal Singh
• [PATCH] MM: CMA: add a simple kernel module as the helper to test CMA   Barry Song
• [PATCH] MM: CMA: add a simple kernel module as the helper to test CMA   Barry Song
• [PATCH v2] MM: CMA: add a simple kernel module as the helper to test CMA   Barry Song
• [PATCH v2] MM: CMA: add a simple kernel module as the helper to test CMA   Barry Song
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Barry Song
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Barry Song
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Barry Song
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Barry Song
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Barry Song
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Barry Song
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Barry Song
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Barry Song
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Barry Song
• [PATCH v4] mm: cma: add a simple kernel module as the helper to test CMA   Barry Song
• implementing "suspend to ram" on cortex A8 based on linux 3.0.8   Barry Song
• [PATCH v3 1/1] rc: Add support for GPIO based IR Receiver driver.   Trilok Soni
• [PATCH v4 2/2] DMAEngine: Add DMAEngine driver based on old MSM ADM DMA APIs   Trilok Soni
• [PATCH v3 1/1] rc: Add support for GPIO based IR Receiver driver.   Trilok Soni
• [PATCH v5 1/2] dmaengine: Add context parameter to prep_dma_sg and prep_interleaved_dma   Trilok Soni
• spinlock_t and tagged memory block size   Rui Sousa
• [PATCH] ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688   R Sricharan
• [PATCH] ARM: OMAP2+: Fix omap2+ build error.   R Sricharan
• [PATCH v2] ARM: OMAP2+: Fix omap2+ build error.   R Sricharan
• [PATCH 6/6] ARM: OMAP3+: SmartReflex Class3: restrict CPU to run on   Vishwanath Sripathy
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Stefano Stabellini
• [PATCH] USB: gadget driver for LPC32xx   Alan Stern
• [PATCH 06/12] USB: ohci-at91: change maximum number of ports   Alan Stern
• [PATCH v3] lpc32xx: Added ethernet driver   Roland Stigge
• [PATCH v4] lpc32xx: Added ethernet driver   Roland Stigge
• [PATCH v4] ARM: LPC32xx: Ethernet support   Roland Stigge
• [PATCH RESEND v3 1/2] GPIO: LPC32xx: Fix missing bit selection mask   Roland Stigge
• [PATCH RESEND v3 2/2] GPIO: LPC32xx: Add output reading to GPO P3   Roland Stigge
• [PATCH v3] ARM: LPC32xx: Fix missing and bad LPC32XX macros   Roland Stigge
• [PATCH v4] lpc32xx: Added ethernet driver   Roland Stigge
• [PATCH v4] lpc32xx: Added ethernet driver: smp_wmb()   Roland Stigge
• [PATCH v5] lpc32xx: Added ethernet driver   Roland Stigge
• [PATCH RESEND v3] USB: Support for LPC32xx SoC   Roland Stigge
• [PATCH RESEND v3] ARM: LPC32xx: USB Support   Roland Stigge
• [PATCH v5] lpc32xx: Added ethernet driver   Roland Stigge
• [PATCH v6] lpc32xx: Added ethernet driver   Roland Stigge
• [PATCH] ARM: LPX32xx: DMA support   Roland Stigge
• [PATCH v7] lpc32xx: Added ethernet driver   Roland Stigge
• [PATCH RESEND v3] USB: Support for LPC32xx SoC   Roland Stigge
• [PATCH v4] USB: Support for LPC32xx SoC   Roland Stigge
• [PATCH v4] USB: Support for LPC32xx SoC   Roland Stigge
• [PATCH v5 0/3] USB: OHCI-HCD: Support for LPC32xx   Roland Stigge
• [PATCH v5 1/3] USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp   Roland Stigge
• [PATCH v5 2/3] USB: ohci-nxp: Rename symbols from pnx4008 to nxp   Roland Stigge
• [PATCH v5 3/3] USB: ohci-nxp: Support for LPC32xx   Roland Stigge
• [PATCH v5 3/3] USB: ohci-nxp: Support for LPC32xx   Roland Stigge
• [PATCH v6 0/3] USB: OHCI-HCD: Support for LPC32xx   Roland Stigge
• [PATCH v6 1/3] USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp   Roland Stigge
• [PATCH v6 2/3] USB: ohci-nxp: Rename symbols from pnx4008 to nxp   Roland Stigge
• [PATCH v6 3/3] USB: ohci-nxp: Support for LPC32xx   Roland Stigge
• [PATCH v5 3/3] USB: ohci-nxp: Support for LPC32xx   Roland Stigge
• [PATCH v7 0/4] USB: OHCI-HCD: Support for LPC32xx   Roland Stigge
• [PATCH v7 1/4] USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp   Roland Stigge
• [PATCH v7 2/4] USB: ohci-nxp: Rename symbols from pnx4008 to nxp   Roland Stigge
• [PATCH v7 3/4] USB: ohci-nxp: Support for LPC32xx   Roland Stigge
• [PATCH v7 4/4] USB: ohci-nxp: Remove i2c_write(), use smbus   Roland Stigge
• [PATCH v7 0/4] USB: OHCI-HCD: Support for LPC32xx   Roland Stigge
• [PATCH v8 0/4] USB: OHCI-HCD: Support for LPC32xx   Roland Stigge
• [PATCH v8 1/4] USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp   Roland Stigge
• [PATCH v8 2/4] USB: ohci-nxp: Rename symbols from pnx4008 to nxp   Roland Stigge
• [PATCH v8 3/4] USB: ohci-nxp: Support for LPC32xx   Roland Stigge
• [PATCH v8 4/4] USB: ohci-nxp: Remove i2c_write(), use smbus   Roland Stigge
• [GIT PULL] LPC32xx: USB Support   Roland Stigge
• [GIT PULL] LPC32xx: Ethernet support   Roland Stigge
• [PATCH] USB: gadget driver for LPC32xx   Roland Stigge
• [PATCH] ARM: LPC32xx: Mach specific support for USB gadget   Roland Stigge
• [PATCH] USB: gadget driver for LPC32xx   Roland Stigge
• [PATCH] USB: gadget driver for LPC32xx   Roland Stigge
• ioremap to a specific virtual address   Roland Stigge
• ioremap to a specific virtual address   Roland Stigge
• uImage with integrated dtb file   Roland Stigge
• uImage with integrated dtb file   Roland Stigge
• [PATCH] net: lpc_eth: Fix rename of dev_hw_addr_random   Roland Stigge
• [PATCH] ARM: LPC32xx: clock.c: Fix lpc-eth clock reference   Roland Stigge
• [PATCH v2 1/2] ARM: EXYNOS: Add USB HOST register definitions   Heiko Stübner
• [PATCH v2 1/2] ARM: EXYNOS: Add USB HOST register definitions   Heiko Stübner
• [PATCH 0/2] Remove bq24022 driver superseeded by gpio-regulator   Heiko Stübner
• [PATCH 1/2] pxa: magician/hx4700: Convert to gpio-regulator from bq24022   Heiko Stübner
• [PATCH 2/2] regulator: Remove bq24022 regulator driver   Heiko Stübner
• [PATCH 0/4] Use clock functions also for clk_h and clk_p on S3C2443/2416   Heiko Stübner
• [PATCH 1/4] ARM: S3C24XX: remove XXX_setup_clocks method from S3C2443   Heiko Stübner
• [PATCH 2/4] ARM: S3C24XX: add get_rate for clk_h on S3C2416/2443   Heiko Stübner
• [PATCH 3/4] ARM: S3C24XX: add get_rate for clk_p on S3C2416/2443   Heiko Stübner
• [PATCH 4/4] ARM: S3C24XX: remove call to s3c24xx_setup_clocks   Heiko Stübner
• [PATCH] ARM: S3C24XX: add support for second irq set of S3C2416   Heiko Stübner
• [PATCH 0/3] S3C24XX: Enable DMA on S3C2416 by sharing S3C2443-DMA   Heiko Stübner
• [PATCH 1/3] ARM: S3C24XX: Fix indentation of dma-s3c2443   Heiko Stübner
• [PATCH 2/3] ARM: S3C24XX: Reuse S3C2443 dma for S3C2416   Heiko Stübner
• [PATCH 3/3] ARM: S3C24XX: remove obsolete S3C2416_DMA option   Heiko Stübner
• [PATCH 0/6] S3C24XX: Add support for HSSPI on S3C2416/S3C2443   Heiko Stübner
• [PATCH 1/6] ARM: S3C24XX: Add forgotten clock lookup table to S3C2443   Heiko Stübner
• [PATCH 2/6] ARM: S3C24XX: claim spi channels for hsspi in dma-s3c2443   Heiko Stübner
• [PATCH 3/6] ARM: S3C24XX: Add map entries needed by the s3c64xx-spi devices   Heiko Stübner
• [PATCH 4/6] ARM: S3C24XX: Add clock-lookup entries required by s3c64xx-spi   Heiko Stübner
• [PATCH 5/6] ARM: S3C24XX: Add HSSPI setup callback for s3c64xx-spi driver   Heiko Stübner
• [PATCH 6/6] spi/s3c64xx: Allow usage for ARCH_S3C24XX   Heiko Stübner
• [PATCH 0/4] S3C24XX: Another move of code to the new mach directory   Heiko Stübner
• [PATCH 1/4] ARM: S3C24XX: Move common-smdk code to mach directory   Heiko Stübner
• [PATCH 2/4] ARM: S3C24XX: move simtec-specific code to mach directory   Heiko Stübner
• [PATCH 3/4] ARM: S3C24XX: Consolidate Simtec extensions   Heiko Stübner
• [PATCH 4/4] ARM: S3C24XX: Move device setup files to mach directory   Heiko Stübner
• [PATCH 0/6] S3C24XX: Add support for HSSPI on S3C2416/S3C2443   Heiko Stübner
• [PATCH 1/6] ARM: S3C24XX: Add forgotten clock lookup table to S3C2443   Heiko Stübner
• [PATCH 2/6] ARM: S3C24XX: claim spi channels for hsspi in dma-s3c2443   Heiko Stübner
• [PATCH 3/6] ARM: S3C24XX: Add map entries needed by the s3c64xx-spi devices   Heiko Stübner
• [PATCH 4/6] ARM: S3C24XX: Add clock-lookup entries required by s3c64xx-spi   Heiko Stübner
• [PATCH v2 5/6] ARM: S3C24XX: Add HSSPI setup callback for s3c64xx-spi driver   Heiko Stübner
• [PATCH 6/6] spi/s3c64xx: Allow usage for ARCH_S3C24XX   Heiko Stübner
• [PATCH][RESEND] ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LL   Heiko Stübner
• [PATCH] ARM: S3C64XX: Add basic cpuidle driver   Heiko Stübner
• ARM: ep93xx: convert vision_ep9307 to MULTI_IRQ_HANDLER   H Hartley Sweeten
• ep93xx: convert vision_ep9307 to MULTI_IRQ_HANDLER   H Hartley Sweeten
• [PATCH 3/9] dmaengine: add private header file   H Hartley Sweeten
• [PATCH 6/9] dmaengine: consolidate tx_status functions   H Hartley Sweeten
• [PATCH 0/9] DMA engine cookie handling cleanups   H Hartley Sweeten
• [PATCH 6/9] dmaengine: consolidate tx_status functions   H Hartley Sweeten
• [PATCH 2/9] dmaengine: move last completed cookie into generic dma_chan structure   H Hartley Sweeten
• [PATCH 3/9] dmaengine: add private header file   H Hartley Sweeten
• [PATCH 4/9] dmaengine: consolidate assignment of DMA cookies   H Hartley Sweeten
• [PATCH 5/9] dmaengine: provide a common function for completing a dma descriptor   H Hartley Sweeten
• [PATCH 6/9] dmaengine: consolidate tx_status functions   H Hartley Sweeten
• [PATCH 7/9] dmaengine: consolidate initialization of cookies   H Hartley Sweeten
• [PATCH 3/4] ARM: create a common IOMEM definition   H Hartley Sweeten
• [PATCH v4 04/11] ep93xx: Use ioremap for backlight driver   H Hartley Sweeten
• [PATCH v4 04/11] ep93xx: Use ioremap for backlight driver   H Hartley Sweeten
• [PATCH v4 08/11] ep93xx: Make syscon access functions private to SoC   H Hartley Sweeten
• [PATCH v4 00/11] ep93xx: Move SoC private bits to core   H Hartley Sweeten
• [PATCH v4 02/10] pwm: Allow chips to support multiple PWMs.   H Hartley Sweeten
• [PATCH v4 00/10] Add PWM framework and device tree support.   H Hartley Sweeten
• [PATCH v4 02/10] pwm: Allow chips to support multiple PWMs.   H Hartley Sweeten
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   H Hartley Sweeten
• [PATCH] arm: ep93xx: use DEFINE_RES_* macros   H Hartley Sweeten
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   H Hartley Sweeten
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   H Hartley Sweeten
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   H Hartley Sweeten
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   H Hartley Sweeten
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   H Hartley Sweeten
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   H Hartley Sweeten
• [PATCH 0/5] mtd: plat_nand: Add default partition parser and use it   H Hartley Sweeten
• [PATCH 2/5] arm: Use the plat_nand default partition parser   H Hartley Sweeten
• [PATCH 2/3] ep93xx: IDE driver platform support code   H Hartley Sweeten
• [PATCH 3/3] ep93xx: Add IDE support to edb93xx boards   H Hartley Sweeten
• [PATCH 1/3] PATA host controller driver for ep93xx   H Hartley Sweeten
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   H Hartley Sweeten
• s3c_otghcd and ECONNRESET   Kispal Szabolcs
• No subject   John Szakmeister
• Cache flushing....   John Szakmeister
• [PATCH v9 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Marek Szyprowski
• [PATCH v9 1/2] ARM: EXYNOS: Change System MMU platform device definitions   Marek Szyprowski
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCH] ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci   Marek Szyprowski
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCH 0/3] Add support for DRM display subsystem   Marek Szyprowski
• [PATCH 1/3] ARM: Exynos: add platform device for core DRM subsystem   Marek Szyprowski
• [PATCH 2/3] ARM: Exynos: Add DRM core device support for Universal C210 board   Marek Szyprowski
• [PATCH 3/3] ARM: Exynos: Add DRM core support for NURI board   Marek Szyprowski
• [PATCH] ARM: dma-mapping: fix calculation of iova bitmap size   Marek Szyprowski
• [PATCHv2 0/3] Add support for DRM display subsystem   Marek Szyprowski
• [PATCHv2 1/3] ARM: Exynos: add platform device for core DRM subsystem   Marek Szyprowski
• [PATCHv2 2/3] ARM: Exynos: Add DRM core device support for Universal C210 board   Marek Szyprowski
• [PATCHv2 3/3] ARM: Exynos: Add DRM core support for NURI board   Marek Szyprowski
• [PATCH 2/3] ARM: Exynos: Add DRM core device support for Universal C210 board   Marek Szyprowski
• [GIT PULL] DMA-mapping framework updates for 3.4   Marek Szyprowski
• [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5   Marek Szyprowski
• [GIT PULL] DMA-mapping framework updates for 3.4   Marek Szyprowski
• [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5   Marek Szyprowski
• [PATCHv7 8/9] ARM: dma-mapping: use alloc, mmap, free from dma_ops   Marek Szyprowski
• [PATCH 0/2] ARM: dma-mapping: Fix mmap support for coherent buffers   Marek Szyprowski
• [PATCH 1/2] common: add dma_mmap_from_coherent() function   Marek Szyprowski
• [PATCH 2/2] arm: dma-mapping: use dma_mmap_from_coherent()   Marek Szyprowski
• [PATCH v12 3/3] iommu/exynos: Add iommu driver for Exynos Platforms   Marek Szyprowski
• [GIT PULL] DMA-mapping framework updates for 3.4   Marek Szyprowski
• [PATCHv2 00/14] DMA-mapping framework redesign preparation   Marek Szyprowski
• [PATCHv2 01/14] common: dma-mapping: introduce alloc_attrs and free_attrs methods   Marek Szyprowski
• [PATCHv2 02/14] X86 & IA64: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCHv2 03/14] MIPS: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCHv2 04/14] PowerPC: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCHv2 05/14] SPARC: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCHv2 06/14] Alpha: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCHv2 07/14] SH: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCHv2 08/14] Microblaze: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCHv2 09/14] Unicore32: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCHv2 10/14] Hexagon: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCHv2 11/14] common: dma-mapping: remove old alloc_coherent and free_coherent methods   Marek Szyprowski
• [PATCHv2 12/14] common: dma-mapping: introduce mmap method   Marek Szyprowski
• [PATCHv2 13/14] common: DMA-mapping: add WRITE_COMBINE attribute   Marek Szyprowski
• [PATCHv2 14/14] common: DMA-mapping: add NON-CONSISTENT attribute   Marek Szyprowski
• [PATCHv2 09/14] Unicore32: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCHv2 01/14] common: dma-mapping: introduce alloc_attrs and free_attrs methods   Marek Szyprowski
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCH 4/4] mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect   T Krishnamoorthy, Balaji
• [PATCH 4/4] mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect   T Krishnamoorthy, Balaji
• [PATCH 4/4] mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect   T Krishnamoorthy, Balaji
• [PATCH v2 0/4] omap hsmmc device tree support   T Krishnamoorthy, Balaji
• Link for the latest patches of AHCI   Srikanth TS
• [PATCH v2 11/17] ASoC: fsl: create fsl_utils to accommodate the common functions   Timur Tabi
• [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Timur Tabi
• [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver   Timur Tabi
• [PATCH v2 09/17] ASoC: fsl: separate SSI and DMA Kconfig options   Timur Tabi
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Timur Tabi
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Timur Tabi
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Timur Tabi
• [PATCH v3 00/11] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Timur Tabi
• [PATCH v3 08/11] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Timur Tabi
• [PATCH v3 10/11] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers   Timur Tabi
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Timur Tabi
• [PATCH v3 07/11] ASoC: fsl: check property 'compatible' for the machine name   Timur Tabi
• [PATCH v4 06/10] ASoC: fsl: check property 'compatible' for the machine name   Timur Tabi
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Timur Tabi
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Timur Tabi
• [PATCH v4] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Timur Tabi
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Timur Tabi
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Timur Tabi
• [PATCH v5 2/8] ASoC: imx: merge sound/soc/imx into sound/soc/fsl   Timur Tabi
• [PATCH v5] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Timur Tabi
• [alsa-devel] [PATCH v5 8/8] ASoC: fsl: add imx-sgtl5000 machine driver   Timur Tabi
• [PATCH] ASoC: fsl: enable ssi clock in probe function   Timur Tabi
• [PATCH] ASoC: fsl: enable ssi clock in probe function   Timur Tabi
• [PATCH] ASoC: fsl: enable ssi clock in probe function   Timur Tabi
• [PATCH] ASoC: fsl: enable ssi clock in probe function   Timur Tabi
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Tabi Timur-B04825
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Tabi Timur-B04825
• [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Tabi Timur-B04825
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Tabi Timur-B04825
• [PATCH 03/20] ARM: imx: merge audmux-v1 and audmux-v2   Tabi Timur-B04825
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Tabi Timur-B04825
• [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Tabi Timur-B04825
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Tabi Timur-B04825
• [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Tabi Timur-B04825
• [PATCH v3 08/11] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Tabi Timur-B04825
• [PATCH v3 00/11] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi   Tabi Timur-B04825
• [PATCH v3 10/11] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers   Tabi Timur-B04825
• [PATCH v3 08/11] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Tabi Timur-B04825
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Tabi Timur-B04825
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Tabi Timur-B04825
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Tabi Timur-B04825
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Tabi Timur-B04825
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Tabi Timur-B04825
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Tabi Timur-B04825
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Tabi Timur-B04825
• [PATCH v3 09/11] ASoC: fsl: remove the fatal error checking on codec-handle   Tabi Timur-B04825
• [PATCH v4] Input: keyboard - add device tree bindings for simple key matrixes   Dmitry Torokhov
• [PATCH 0/6] AT91 drivers Kconfig cleanup   Dmitry Torokhov
• [PATCH 1/2] input: keypad: move platform_data to <linux/platform_data>   Dmitry Torokhov
• [PATCH 1/2] input: keypad: move platform_data to <linux/platform_data>   Dmitry Torokhov
• [PATCH 2/2] Input: omap-keypad: dynamically handle register offsets   Dmitry Torokhov
• [PATCH v2 3/4] drivers: input: Fix OMAP_GPIO_IRQ with gpio_to_irq() in ams_delta_serio_exit()   Dmitry Torokhov
• [PATCH 0/6] AT91 drivers Kconfig cleanup   Dmitry Torokhov
• [GIT PULL] DMA-mapping framework updates for 3.4   Linus Torvalds
• [GIT PULL 4/5] ARM: More device tree support updates   Linus Torvalds
• [GIT PULL 1/5] ARM: cleanups of io includes   Linus Torvalds
• [GIT PULL] ARM: Two more fixes for merge window fallout   Linus Torvalds
• [PATCHv2 06/14] Alpha: adapt for dma_map_ops changes   Matt Turner
• [PATCH v5 0/4] common clk framework   Mike Turquette
• [PATCH v5 1/4] Documentation: common clk API   Mike Turquette
• [PATCH v5 2/4] clk: Kconfig: add entry for HAVE_CLK_PREPARE   Mike Turquette
• [PATCH v5 3/4] clk: introduce the common clock framework   Mike Turquette
• [PATCH v5 4/4] clk: basic clock hardware types   Mike Turquette
• [PATCH v5 3/4] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v5 3/4] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v5 4/4] clk: basic clock hardware types   Turquette, Mike
• [PATCH v5 4/4] clk: basic clock hardware types   Turquette, Mike
• [PATCH] clk: Fix compile errors in DEFINE_CLK_GATE   Turquette, Mike
• [PATCH v5 2/4] clk: Kconfig: add entry for HAVE_CLK_PREPARE   Turquette, Mike
• [PATCH v5 3/4] clk: introduce the common clock framework   Turquette, Mike
• [RFC 00/14] Generic clk for Orion platforms.   Turquette, Mike
• [PATCH v5 3/4] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v5 3/4] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v5 3/4] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v5 0/4] common clk framework   Turquette, Mike
• [PATCH v5 4/4] clk: basic clock hardware types   Turquette, Mike
• [PATCH v5 4/4] clk: basic clock hardware types   Turquette, Mike
• [PATCH v6 0/3] common clk framework   Mike Turquette
• [PATCH v6 1/3] Documentation: common clk API   Mike Turquette
• [PATCH v6 2/3] clk: introduce the common clock framework   Mike Turquette
• [PATCH v6 3/3] clk: basic clock hardware types   Mike Turquette
• [PATCH v6 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v6 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v6 3/3] clk: basic clock hardware types   Turquette, Mike
• [PATCH v6 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v6 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v5 3/4] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v5 3/4] clk: introduce the common clock framework   Turquette, Mike
• [PATCH 1/7] clk: fix orphan list iterator to be safe   Turquette, Mike
• [PATCH v5 3/4] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v5 3/4] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v6 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v7 0/3] common clk framework   Mike Turquette
• [PATCH v7 1/3] Documentation: common clk API   Mike Turquette
• [PATCH v7 2/3] clk: introduce the common clock framework   Mike Turquette
• [PATCH v7 3/3] clk: basic clock hardware types   Mike Turquette
• [PATCH v6 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v7 3/3] clk: basic clock hardware types   Turquette, Mike
• [PATCH v7 1/3] Documentation: common clk API   Turquette, Mike
• [RFC/PATCH 4/4] pxa: convert to common clock framework   Turquette, Mike
• [RFC/PATCH 0/4] pxa: attempt at switch to common clock framework   Turquette, Mike
• [PATCH v7 1/3] Documentation: common clk API   Turquette, Mike
• [PATCH v7 1/3] Documentation: common clk API   Turquette, Mike
• [RFC/PATCH 4/4] pxa: convert to common clock framework   Turquette, Mike
• [PATCH v7 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v7 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v7 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v7 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v7 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v7 2/3] clk: introduce the common clock framework   Turquette, Mike
• i.MX: Convert v4/v5 based SoCs to common clock framework   Turquette, Mike
• [PATCH v7 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v7 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH 1/2] clk: Fix error handling in fixed clock hardware type register fn   Turquette, Mike
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Turquette, Mike
• [PATCH 1/2] clk: Fix error handling in fixed clock hardware type register fn   Turquette, Mike
• [PATCH 1/2] clk: Fix error handling in fixed clock hardware type register fn   Turquette, Mike
• [PATCH 1/4] clk: fixed-rate: Don't open code kstrdup()   Turquette, Mike
• [PATCH 3/4] clk: Provide dummy clk_unregister()   Turquette, Mike
• [PATCH 4/4] clk: wm831x: Add initial WM831x clock driver   Turquette, Mike
• [PATCH v7 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v7 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v7 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Turquette, Mike
• [PATCH 02/10] clk: remove unnecessary EXPORT_SYMBOL_GPL   Turquette, Mike
• [PATCH 09/10] clk: dynamically allocate parent_names basic clk registration   Turquette, Mike
• [PATCH 05/10] clk: align error return of basic clks registeration   Turquette, Mike
• [PATCH 03/10] clk: add "const" for clk_ops of basic clks   Turquette, Mike
• [PATCH 01/10] clk: use kzalloc in clk_register_mux   Turquette, Mike
• [PATCH 06/10] clk: fixed-rate: Don't open code kstrdup()   Turquette, Mike
• [PATCH 08/10] clk: fixed-rate: registration error handling fixup   Turquette, Mike
• [PATCH 07/10] clk: Constify parent name arrays   Turquette, Mike
• [PATCH v7 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH 02/10] clk: remove unnecessary EXPORT_SYMBOL_GPL   Turquette, Mike
• [PATCH 04/10] clk: declare clk_ops of basic clks in clk-provider.h   Turquette, Mike
• [PATCH v7 2/3] clk: introduce the common clock framework   Turquette, Mike
• [PATCH] ARM: OMAP4: clock: Add aliases for McBSP fclk clocks   Peter Ujfalusi
• [PATCH 2/3] arm: fix compile error in mach-omap2/board-omap4panda.c   Peter Ujfalusi
• [PATCH 3/3] arm: more fallout from i2c conversions in board-omap4panda.c   Peter Ujfalusi
• [PATCH 0/5] MFD: Reverting twl6040 patches going for 3.4   Peter Ujfalusi
• [PATCH 1/5] Revert "mfd/Input/ASoC: twl6040 kconfig fixes"   Peter Ujfalusi
• [PATCH 2/5] Revert "mfd: Add regulator support for twl6040 VIO, V2V1 supplies"   Peter Ujfalusi
• [PATCH 3/5] Revert "ASoC: Remove twl6040 dependency on twl4030 from Kconfig"   Peter Ujfalusi
• [PATCH 4/5] Revert "mfd: Convert twl6040 to an i2c driver, and separate it from twl core"   Peter Ujfalusi
• [PATCH 5/5] Revert "mfd: Detach twl6040 from the pmic mfd driver"   Peter Ujfalusi
• [PATCH] plat-omap: mcbsp: Configure wakeup in later phase   Peter Ujfalusi
• [PATCH v2 0/3] ARM/ASoC: OMAP McBSP: Correct CLKR/FSR source selection   Peter Ujfalusi
• [PATCH v2 1/3] ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configuration   Peter Ujfalusi
• [PATCH v2 2/3] ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header   Peter Ujfalusi
• [PATCH v2 3/3] ASoC: omap-mcbsp: Single function CLKR/FSR source mux configuration   Peter Ujfalusi
• [PATCH v2 2/3] ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header   Peter Ujfalusi
• [PATCH 0/2] ARM/ASoC: OMAP: McBSP config cleanup   Peter Ujfalusi
• [PATCH 1/2] ARM: OMAP: Remove CONFIG_OMAP_MCBSP references   Peter Ujfalusi
• [PATCH 2/2] ASoC: OMAP: Build config cleanup for McBSP   Peter Ujfalusi
• [PATCH] ARM: OMAP4: clock: Add aliases for McBSP fclk clocks   Peter Ujfalusi
• [PATCH] ARM: OMAP4: clock: Add aliases for McBSP fclk clocks   Peter Ujfalusi
• [PATCH 1/2] ARM: OMAP3: hwmod_data: Rename the common irq for McBSP ports   Peter Ujfalusi
• [PATCH 2/2] ARM: OMAP4: hwmod_data: Name the common irq for McBSP ports   Peter Ujfalusi
• [PATCH] ARM: remove ixp2000 platform   Greg Ungerer
• [PATCH] ARM: remove ixp2000 platform   Greg Ungerer
• Atmel at91x40 ("EB01" eval board) resurected   Greg Ungerer
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Geert Uytterhoeven
• [PATCH 0/4] dt: device tree support for TI EMIF driver   Aneesh V
• [PATCH 1/4] dt: device tree bindings for LPDDR2 memories   Aneesh V
• [PATCH 2/4] dt: emif: device tree bindings for TI's EMIF sdram controller   Aneesh V
• [PATCH 3/4] arm: dts: EMIF and LPDDR2 device tree data for OMAP4 boards   Aneesh V
• [PATCH 4/4] misc: emif: add device tree support to emif driver   Aneesh V
• [PATCH 4/4] misc: emif: add device tree support to emif driver   Aneesh V
• [PATCH v2 0/7] Add TI EMIF SDRAM controller driver   Aneesh V
• [PATCH v2 1/7] misc: ddr: add LPDDR2 data from JESD209-2   Aneesh V
• [PATCH v2 2/7] misc: emif: add register definitions for EMIF   Aneesh V
• [PATCH v2 3/7] misc: emif: add basic infrastructure for EMIF driver   Aneesh V
• [PATCH v2 4/7] misc: emif: handle frequency and voltage change events   Aneesh V
• [PATCH v2 5/7] misc: emif: add interrupt and temperature handling   Aneesh V
• [PATCH v2 6/7] misc: emif: add one-time settings   Aneesh V
• [PATCH v2 7/7] misc: emif: add debugfs entries for emif   Aneesh V
• [PATCH v2 0/4] dt: device tree support for TI EMIF driver   Aneesh V
• [PATCH v2 1/4] dt: device tree bindings for LPDDR2 memories   Aneesh V
• [PATCH v2 2/4] dt: emif: device tree bindings for TI's EMIF sdram controller   Aneesh V
• [PATCH v2 3/4] arm: dts: EMIF and LPDDR2 device tree data for OMAP4 boards   Aneesh V
• [PATCH v2 4/4] misc: emif: add device tree support to emif driver   Aneesh V
• [PATCH v2 1/7] misc: ddr: add LPDDR2 data from JESD209-2   Aneesh V
• [PATCH v2 0/7] Add TI EMIF SDRAM controller driver   Aneesh V
• [PATCH v3] misc: ddr: add LPDDR2 data from JESD209-2   Aneesh V
• [PATCH v4] misc: ddr: add LPDDR2 data from JESD209-2   Aneesh V
• [PATCH v2 1/7] misc: ddr: add LPDDR2 data from JESD209-2   Aneesh V
• [PATCH v4] misc: ddr: add LPDDR2 data from JESD209-2   Aneesh V
• [PATCH v4 0/7] Add TI EMIF SDRAM controller driver   Aneesh V
• [PATCH v4 1/7] misc: ddr: add LPDDR2 data from JESD209-2   Aneesh V
• [PATCH v4 2/7] misc: emif: add register definitions for EMIF   Aneesh V
• [PATCH v4 3/7] misc: emif: add basic infrastructure for EMIF driver   Aneesh V
• [PATCH v4 4/7] misc: emif: handle frequency and voltage change events   Aneesh V
• [PATCH v4 5/7] misc: emif: add interrupt and temperature handling   Aneesh V
• [PATCH v4 6/7] misc: emif: add one-time settings   Aneesh V
• [PATCH v4 7/7] misc: emif: add debugfs entries for emif   Aneesh V
• [PATCH v2 1/7] misc: ddr: add LPDDR2 data from JESD209-2   Aneesh V
• [PATCH] serial: pl011: implement workaround for CTS clear event issue   Rajanikanth H V
• [PATCH v3 0/2] Add Qualcomm MSM ADM DMAEngine driver   Ravi Kumar V
• [PATCH v3 1/2] dmaengine: Add support for per xfer specific privatedata   Ravi Kumar V
• [PATCH v3 2/2] DMAEngine: Add DMAEngine driver based on old MSM DMA APIs   Ravi Kumar V
• [PATCH v3 2/2] DMAEngine: Add DMAEngine driver based on old MSM DMA APIs   Ravi Kumar V
• [PATCH v3 1/2] dmaengine: Add support for per xfer specific privatedata   Ravi Kumar V
• [PATCH v3 2/2] DMAEngine: Add DMAEngine driver based on old MSM DMA APIs   Ravi Kumar V
• [PATCH v3 2/2] DMAEngine: Add DMAEngine driver based on old MSM DMA APIs   Ravi Kumar V
• [PATCH v3 1/2] dmaengine: Add support for per xfer specific privatedata   Ravi Kumar V
• [PATCH 1/2] dmaengine: Add context parameter to prep_dma_sg and prep_interleaved_dma   Ravi Kumar V
• [PATCH 2/2] DMAEngine: Add DMAEngine driver based on old MSM ADM DMA APIs   Ravi Kumar V
• [PATCH v4 0/2] Add Qualcomm MSM ADM DMAEngine driver   Ravi Kumar V
• [PATCH v4 1/2] dmaengine: Add context parameter to prep_dma_sg and prep_interleaved_dma   Ravi Kumar V
• [PATCH 2/2] DMAEngine: Add DMAEngine driver based on old MSM ADM DMA APIs   Ravi Kumar V
• [PATCH v4 2/2] DMAEngine: Add DMAEngine driver based on old MSM ADM DMA APIs   Ravi Kumar V
• [PATCH v5 0/2] Add Qualcomm MSM ADM DMAEngine driver   Ravi Kumar V
• [PATCH v5 1/2] dmaengine: Add context parameter to prep_dma_sg and prep_interleaved_dma   Ravi Kumar V
• [PATCH v5 2/2] DMAEngine: Add DMAEngine driver based on old MSM ADM DMA APIs   Ravi Kumar V
• [PATCH] ARM: OMAP2+: Fix compile error when FB_OMAP2 is not set   Tomi Valkeinen
• [PATCH] ARM: OMAP2+: Fix compile error when FB_OMAP2 is not set   Tomi Valkeinen
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Tomi Valkeinen
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Tomi Valkeinen
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Tomi Valkeinen
• OMAP DSS device tree design problems   Tomi Valkeinen
• OMAP DSS device tree design problems   Tomi Valkeinen
• [PATCH v2 7/7] ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init   Tomi Valkeinen
• [PATCH v2 7/7] ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init   Tomi Valkeinen
• [PATCH v2 7/7] ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init   Tomi Valkeinen
• [PATCH v2 5/5] ARM: OMAP2+: clean up some cppcheck warnings   Varadarajan, Charulatha
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Marek Vasut
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Marek Vasut
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Marek Vasut
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Marek Vasut
• [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support   Marek Vasut
• [PATCH v1 0/5] dt: add basic imx28 support   Marek Vasut
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Marek Vasut
• [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support   Marek Vasut
• [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support   Marek Vasut
• [PATCH v2 1/1] ARM: imx28: add basic dt support   Marek Vasut
• [PATCH 2/5] arm: Use the plat_nand default partition parser   Marek Vasut
• zImage and raw ramdisk support -- test   Marek Vasut
• [U-Boot] zImage and raw ramdisk support -- test   Marek Vasut
• [PATCH 0/3] coupled cpuidle state support   Arjan van de Ven
• [PATCHv2 3/5] cpuidle: add support for states that affect multiple cpus   Arjan van de Ven
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Linas Vepstas
• [PATCH v2] video: s3c-fb: Add device tree support   Rabin Vincent
• [PATCH 4/4] ARM: __io abuse cleanup   Anton Vorontsov
• [PATCH v2 0/10] Fixes for common mistakes w/ for_each_process and task->mm   Anton Vorontsov
• [PATCH 01/10] cpu: Introduce clear_tasks_mm_cpumask() helper   Anton Vorontsov
• [PATCH 02/10] arm: Use clear_tasks_mm_cpumask()   Anton Vorontsov
• [PATCH 03/10] powerpc: Use clear_tasks_mm_cpumask()   Anton Vorontsov
• [PATCH 04/10] sh: Use clear_tasks_mm_cpumask()   Anton Vorontsov
• [PATCH 05/10] blackfin: A couple of task->mm handling fixes   Anton Vorontsov
• [PATCH 06/10] blackfin: Fix possible deadlock in decode_address()   Anton Vorontsov
• [PATCH 07/10] um: Should hold tasklist_lock while traversing processes   Anton Vorontsov
• [PATCH 08/10] um: Fix possible race on task->mm   Anton Vorontsov
• [PATCH 09/10] um: Properly check all process' threads for a live mm   Anton Vorontsov
• [PATCH 10/10] oom: Make find_lock_task_mm() sparse-aware   Anton Vorontsov
• [PATCH 10/10] oom: Make find_lock_task_mm() sparse-aware   Anton Vorontsov
• [PATCH v2.1 01/10] cpu: Introduce clear_tasks_mm_cpumask() helper   Anton Vorontsov
• [PATCH 07/10] um: Should hold tasklist_lock while traversing processes   Anton Vorontsov
• ARM11MPcore: tlb_ops_need_broadcast causes deadlock   Peter Waechtler
• ARM11MPcore: tlb_ops_need_broadcast causes deadlock   Peter Waechtler
• ARM11MPcore: tlb_ops_need_broadcast causes deadlock   Peter Waechtler
• [PATCH v3 2/2] DMAEngine: Add DMAEngine driver based on old MSM DMA APIs   Daniel Walker
• [PATCH v3 2/2] DMAEngine: Add DMAEngine driver based on old MSM DMA APIs   Daniel Walker
• [PATCH 3/4] ARM: kirkwood: convert rtc-mv to fdt.   Michael Walle
• [PATCH 4/5 v2] ARM: kirkwood: convert rtc-mv to fdt.   Michael Walle
• [PATCH 1/5 v2] ARM: kirkwood: covert orion-spi to fdt.   Michael Walle
• [PATCH 3/4] ARM: kirkwood: convert rtc-mv to fdt.   Michael Walle
• [PATCH 06/14] ARM: kirkwood: convert uart0 to devicetree.   Michael Walle
• [GIT PULL] ux500 fixes for v3.4, take 3   Linus Walleij
• [PATCH 8/8] ARM: tegra: HACK: remove set_irq_flags() from driver   Linus Walleij
• [PATCH 1/2] ARM: dts: versatile-pb/ab fix MMC IRQs   Linus Walleij
• [PATCH 2/2] ARM: versatile: add some auxdata for device trees   Linus Walleij
• [PATCH] pinctrl: fix the pin descriptor kerneldoc   Linus Walleij
• [PATCH] pinctrl: resurrect verbose pinmux-pins   Linus Walleij
• [PATCH] ARM: ux500: wake secondary cpu via resched   Linus Walleij
• [PATCH] pinctrl: resurrect verbose pinmux-pins   Linus Walleij
• [PATCH 0/9] DMA engine cookie handling cleanups   Linus Walleij
• [GIT PULL] ux500 fixes for v3.4, take 3   Linus Walleij
• [PATCH V2 1/3] Documentation/gpio.txt: Explain expected pinctrl interaction   Linus Walleij
• [PATCH V2 2/3] pinctrl: allow concurrent gpio and mux function ownership of pins   Linus Walleij
• [PATCH V2 3/3] gpio: tegra: Hide tegra_gpio_enable/disable()   Linus Walleij
• [PATCH] pinctrl: include machine header to core.h   Linus Walleij
• [PATCH] pinctrl: split pincontrol states into its own header   Linus Walleij
• [PATCH 1/4] pinctrl: introduce generic pin config   Linus Walleij
• [PATCH 2/4] pinctrl/coh901: use generic pinconf enums and parameters   Linus Walleij
• [PATCH 3/4] pinctrl: support pinconfig on the U300   Linus Walleij
• [PATCH 4/4] ARM: u300: configure some pins as an example   Linus Walleij
• [PATCH] pinctrl: split pincontrol states into its own header   Linus Walleij
• [PATCH] pinctrl: include machine header to core.h   Linus Walleij
• [PATCH v2 0/9] DMA engine cookie handling cleanups   Linus Walleij
• [PATCH] ARM: remove ixp2000 platform   Linus Walleij
• AMBA devices behing a PCI bridge   Linus Walleij
• [PATCH] watchdog/coh901327: convert to use watchdog core   Linus Walleij
• [PATCH] watchdog/coh901327: convert to use watchdog core   Linus Walleij
• [PATCH] ARM: smp_twd: Only wait for reprogramming on active cpus   Linus Walleij
• [PATCH] serial: PL011: clear pending interrupts   Linus Walleij
• [PATCH] serial: PL011: clear pending interrupts   Linus Walleij
• [PATCH 3/4] pinctrl: support pinconfig on the U300   Linus Walleij
• [PATCH 1/4] pinctrl: introduce generic pin config   Linus Walleij
• [PATCH 1/3] led-class: change back LEDS_CLASS to tristate instead of bool   Linus Walleij
• [PATCH 2/3] led-triggers: use atomic kzalloc during led trigger registering   Linus Walleij
• [PATCH] pinctrl: fix error path in pinconf_map_to_setting()   Linus Walleij
• [PATCH 1/4 v7] pinctrl: introduce generic pin config   Linus Walleij
• [PATCH 3/4 v3] pinctrl: support pinconfig on the U300   Linus Walleij
• [PATCH 4/4 v2] ARM: u300: configure some pins as an example   Linus Walleij
• [PATCH V2 2/3] pinctrl: allow concurrent gpio and mux function ownership of pins   Linus Walleij
• [PATCH 3/4] ARM: create a common IOMEM definition   Linus Walleij
• [PATCH 4/4] ARM: __io abuse cleanup   Linus Walleij
• [PATCH 0/5] pinctrl: add new Samsung pinctrl driver and add Exynos4 support   Linus Walleij
• [PATCH v3] serial: PL011: clear pending interrupts   Linus Walleij
• [PATCH 3/3] led-triggers: create a trigger for CPU activity   Linus Walleij
• [PATCH v3] serial: PL011: clear pending interrupts   Linus Walleij
• [PATCH 01/10] ARM: ux500: CONFIG: Enable Device Tree support for future endeavours   Linus Walleij
• [PATCH 02/10] ARM: ux500: Initial Device Tree support for Snowball   Linus Walleij
• [PATCH 03/10] ARM: ux500: combine the board init functions for DT boot   Linus Walleij
• [PATCH 04/10] ARM: ux500: split dts file for snowball into generic part   Linus Walleij
• [PATCH 05/10] ARM: ux500: db8500: list most devices in the snowball device tree   Linus Walleij
• [PATCH 06/10] ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree   Linus Walleij
• [PATCH 08/10] ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree   Linus Walleij
• [PATCH 09/10] ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree   Linus Walleij
• [PATCH 10/10] ARM: ux500: Enable PL022 SSP Controller in Device Tree   Linus Walleij
• [PATCH 10/10] ARM: ux500: Enable PL022 SSP Controller in Device Tree   Linus Walleij
• [PATCH 07/10] ARM: ux500: Provide local timer support for Device Tree   Linus Walleij
• [PATCH 1/2] watchdog: Add support for WDIOC_GETTIMELEFT IOCTL in watchdog core   Linus Walleij
• [PATCH 2/2 v2] watchdog/coh901327: convert to use watchdog core   Linus Walleij
• [PATCH] watchdog/coh901327: convert to use watchdog core   Linus Walleij
• [PATCH v7 1/3] Documentation: common clk API   Linus Walleij
• [PATCH 0/5] MMC: mmci: Provide bindings for Device Tree   Linus Walleij
• ARM: fix build failure on ux500 in linux-next   Linus Walleij
• [PATCH 1/2] ARM: dts: versatile-pb/ab fix MMC IRQs   Linus Walleij
• [PATCH v3] serial: PL011: clear pending interrupts   Linus Walleij
• [PATCH] serial: PL011: move interrupt clearing   Linus Walleij
• [PATCH] serial: PL011: move interrupt clearing   Linus Walleij
• [PATCH] watchdog/coh901327: convert to use watchdog core   Linus Walleij
• [PATCH] serial: PL011: move interrupt clearing   Linus Walleij
• [PATCH v5 2/2] DMAEngine: Add DMAEngine driver based on old MSM ADM DMA APIs   Linus Walleij
• [PATCH] serial: pl011: implement workaround for CTS clear event issue   Linus Walleij
• [PATCH] serial: pl011: implement workaround for CTS clear event issue   Linus Walleij
• [PATCH] serial: pl011: implement workaround for CTS clear event issue   Linus Walleij
• [PATCH v2] serial: pl011: implement workaround for CTS clear event issue   Linus Walleij
• [PATCH] amba-pl011: fix panic introduced by "clear pending interrupts"   Linus Walleij
• [PATCH] ARM: ux500: fix compile error in new timer code   Linus Walleij
• [PATCH] serial: PL011: move interrupt clearing   Linus Walleij
• [RFC] pinctrl: Replace list_groups() with get_groups_count()   Linus Walleij
• [RFC] pinctrl: Replace list_groups() with get_groups_count()   Linus Walleij
• [RFC] pinctrl: Replace list_groups() with get_groups_count()   Linus Walleij
• [PATCH] ARM: OMAP: hwmod: Use sysc_fields->srst_shift and get rid of hardcoded SYSC_TYPE2_SOFTRESET_MASK   Paul Walmsley
• [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data   Paul Walmsley
• [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data   Paul Walmsley
• [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data   Paul Walmsley
• [PATCH-V3 2/3] ARM: OMAP4: prminst: Add boot time __init function for prminst   Paul Walmsley
• [PATCH] ARM: OMAP2+: omap_device: call all suspend, resume callbacks when OMAP_DEVICE_NO_IDLE_ON_SUSPEND is set   Paul Walmsley
• [PATCH] ARM: OMAP2+: omap_device: call all suspend, resume callbacks when OMAP_DEVICE_NO_IDLE_ON_SUSPEND is set   Paul Walmsley
• [RFC PATCH] OMAP: UART: Enable tx wakeup bit in wer   Paul Walmsley
• [PATCH] ARM: OMAP2+: omap_device: call all suspend, resume callbacks when OMAP_DEVICE_NO_IDLE_ON_SUSPEND is set   Paul Walmsley
• [PATCHv4 1/6] ARM: OMAP3 PM: correct enable/disable of daisy io chain   Paul Walmsley
• [PATCHv4 5/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Paul Walmsley
• [PATCHv4 1/6] ARM: OMAP3 PM: correct enable/disable of daisy io chain   Paul Walmsley
• [PATCHv4 4/6] ARM: OMAP3+: PRM: Enable IO wake up   Paul Walmsley
• [RFC PATCH] OMAP: UART: Enable tx wakeup bit in wer   Paul Walmsley
• [PATCH 00/12] ARM: OMAP2+: hwmod: remove link arrays   Paul Walmsley
• [PATCH 01/12] ARM: OMAP2+: hwmod: add _find_mpu_rt_port()   Paul Walmsley
• [PATCH 02/12] ARM: OMAP2+: hwmod: add function to iterate over struct omap_hwmod_ocp_if   Paul Walmsley
• [PATCH 03/12] ARM: OMAP2+: hwmod: consolidate finding the MPU port index and storing it   Paul Walmsley
• [PATCH 04/12] ARM: OMAP2+: hwmod: add support for link registration   Paul Walmsley
• [PATCH 06/12] ARM: OMAP: hwmod: remove code support for direct hwmod registration   Paul Walmsley
• [PATCH 08/12] ARM: OMAP2xxx: hwmod data: share common hwmods between OMAP2420 and OMAP2430   Paul Walmsley
• [PATCH 09/12] ARM: OMAP2xxx: hwmod data: share common interface data   Paul Walmsley
• [PATCH 10/12] ARM: OMAP3: hwmod data: fix IVA interface clock   Paul Walmsley
• [PATCH 11/12] ARM: OMAP3: hwmod data: add IVA hard reset lines, main clock, clockdomain   Paul Walmsley
• [PATCH 12/12] ARM: OMAP2xxx: hwmod data: start to fix the IVA1, IVA2 and DSP   Paul Walmsley
• [PATCH 00/12] ARM: OMAP2+: hwmod: remove link arrays   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: hwmod/timer: first set of cleanups for 3.4   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: hwmod data: cleanup in preparation for link array removal   Paul Walmsley
• [PATCH 00/15] ARM: OMAP4: hwmod data: add almost all remaining IP blocks   Paul Walmsley
• [PATCH 01/15] ARM: OMAP2+: clockdomains: make {prm,cm}_clkdm common   Paul Walmsley
• [PATCH 02/15] ARM: OMAP4: hwmod data: introduce fdif(face detect module) hwmod   Paul Walmsley
• [PATCH 03/15] ARM: OMAP4: hwmod data: add HDQ/1-wire   Paul Walmsley
• [PATCH 04/15] ARM: OMAP4: hwmod data: add GPMC   Paul Walmsley
• [PATCH 05/15] ARM: OMAP4: hwmod data: add EMIF1 and 2   Paul Walmsley
• [PATCH 06/15] ARM: OMAP4: hwmod data: add GPU   Paul Walmsley
• [PATCH 07/15] ARM: OMAP4: hwmod data: add the Slimbus IP blocks   Paul Walmsley
• [PATCH 08/15] ARM: OMAP4: hwmod data: add McASP   Paul Walmsley
• [PATCH 09/15] ARM: OMAP4: hwmod data: add some interconnect-related IP blocks   Paul Walmsley
• [PATCH 10/15] ARM: OMAP4: hwmod data: add remaining USB-related IP blocks   Paul Walmsley
• [PATCH 11/15] ARM: OMAP4: hwmod data: add OCM RAM IP block   Paul Walmsley
• [PATCH 12/15] ARM: OMAP4: hwmod data: add the OCP-WP IP block   Paul Walmsley
• [PATCH 13/15] ARM: OMAP4: hwmod data: add System Control Module   Paul Walmsley
• [PATCH 14/15] ARM: OMAP4: hwmod data: add PRCM and related IP blocks   Paul Walmsley
• [PATCH 15/15] ARM: OMAP4: hwmod data: add DEBUGSS skeleton   Paul Walmsley
• [PATCH 00/15] ARM: OMAP4: hwmod data: add almost all remaining IP blocks   Paul Walmsley
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Paul Walmsley
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: hwmod data: cleanup in preparation for link array removal   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: hwmod data: cleanup in preparation for link array removal   Paul Walmsley
• [PATCH 5/9] ARM: OMAP36xx: hwmod data: fix SmartReflex interface data   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: hwmod: miscellaneous changes for 3.4   Paul Walmsley
• [PATCH 00/12] ARM: OMAP2+: hwmod: remove link arrays   Paul Walmsley
• [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data   Paul Walmsley
• [PATCH 5/9] ARM: OMAP36xx: hwmod data: fix SmartReflex interface data   Paul Walmsley
• [PATCH] ARM: OMAP4: clock: Add aliases for McBSP fclk clocks   Paul Walmsley
• [PATCH] ARM: OMAP4: clock: Add aliases for McBSP fclk clocks   Paul Walmsley
• [PATCHv5 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Paul Walmsley
• [PATCHv5 1/6] ARM: OMAP3 PM: correct enable/disable of daisy io chain   Paul Walmsley
• [PATCHv5 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Paul Walmsley
• [PATCHv5 3/6] ARM: OMAP4 PM: Add IO Daisychain support   Paul Walmsley
• [PATCHv5 4/6] ARM: OMAP3+: PRM: Enable IO wake up   Paul Walmsley
• [PATCHv5 5/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Paul Walmsley
• [PATCHv5 6/6] ARM: OMAP3 PM: Remove IO Daisychain control from cpuidle   Paul Walmsley
• [PATCHv5 0/6] ARM: OMAP3+: IO daisy chain support fixes   Paul Walmsley
• [PATCH] ARM: OMAP4: clock: Add aliases for McBSP fclk clocks   Paul Walmsley
• [PATCHv5 0/6] ARM: OMAP3+: IO daisy chain support fixes   Paul Walmsley
• [PATCHv5 3/6] ARM: OMAP4 PM: Add IO Daisychain support   Paul Walmsley
• [GIT PULL] ARM: OMAP: clock: clock patches for 3.4   Paul Walmsley
• [PATCHv5 0/6] ARM: OMAP3+: IO daisy chain support fixes   Paul Walmsley
• [GIT PULL] ARM: OMAP3+: PRM/hwmod: fix and improve I/O chain wakeup support   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: hwmod/PRM: miscellaneous patches for 3.4   Paul Walmsley
• [PATCH 3/4] ARM: create a common IOMEM definition   Paul Walmsley
• [PATCH 0/5] ARM: OMAP2+: resolve some warnings from sparse, cppcheck   Paul Walmsley
• [PATCH 1/5] ARM: OMAP2+: declare file-local functions as static   Paul Walmsley
• [PATCH 2/5] ARM: OMAP2+: add includes for missing prototypes   Paul Walmsley
• [PATCH 3/5] ARM: OMAP2+: GPMC: resolve type-conversion warning from sparse   Paul Walmsley
• [PATCH 4/5] ARM: OMAP2+: fix 'using plain integer as NULL pointer' sparse warnings   Paul Walmsley
• [PATCH 5/5] ARM: OMAP2+: clean up some cppcheck warnings   Paul Walmsley
• [PATCH 5/5] ARM: OMAP2+: clean up some cppcheck warnings   Paul Walmsley
• [PATCH v2 5/5] ARM: OMAP2+: clean up some cppcheck warnings   Paul Walmsley
• [PATCH v3 5/5] ARM: OMAP2+: clean up some cppcheck warnings   Paul Walmsley
• [PATCH v2 0/2] Fixes in hwmod reset code   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: hwmod: remove link arrays   Paul Walmsley
• [GIT PULL] ARM: OMAP4: hwmod data: add almost all remaining IP blocks   Paul Walmsley
• [PATCH v2 5/8] ARM: OMAP2+: hwmod: ensure that SYSCONFIG bits are reprogrammed after a reset   Paul Walmsley
• [PATCH 5/6] ARM: OMAP2+: I2C: always compile I2C reset code, even if I2C driver is not built   Paul Walmsley
• [PATCH 1/2] ARM: OMAP: powerdomain: Wait for powerdomain transition in pwrdm_state_switch()   Paul Walmsley
• [PATCH] OMAP: clock: fix race in disable all clocks   Paul Walmsley
• [PATCH 6/6] ARM: OMAP: fix cpufreq build   Paul Walmsley
• [PATCH 1/2] ARM: OMAP: powerdomain: Wait for powerdomain transition in pwrdm_state_switch()   Paul Walmsley
• [PATCH 1/2] ARM: OMAP: powerdomain: Wait for powerdomain transition in pwrdm_state_switch()   Paul Walmsley
• [PATCH v7 1/3] Documentation: common clk API   Paul Walmsley
• [PATCH v3 1/2] arm: omap3: pm34xx.c: Fix omap3_pm_init() error out paths   Paul Walmsley
• [PATCH v7 1/3] Documentation: common clk API   Paul Walmsley
• [PATCH v7 1/3] Documentation: common clk API   Paul Walmsley
• [PATCH 2/2] clk: Move init fields from clk to clk_hw   Paul Walmsley
• [PATCH v7 1/3] Documentation: common clk API   Paul Walmsley
• [PATCH v7 1/3] Documentation: common clk API   Paul Walmsley
• [PATCH 0/3] OMAP2+: UART: Enable tx wakeup + remove cpu checks   Paul Walmsley
• [PATCH] ARM: OMAP: hwmod: Fix error handling in functions used OMAP4 onwards   Paul Walmsley
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Cong Wang
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Cong Wang
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Cong Wang
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Cong Wang
• [PATCH v3] MM: CMA: add a simple kernel module as the helper to test CMA   Cong Wang
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Stephen Warren
• [PATCH 5/8] ARM: tegra: work around tegra THUMB2_KERNEL bug   Stephen Warren
• [PATCH 6/8] ARM: tegra: USB_ULPI needs USB   Stephen Warren
• [PATCH 7/8] ARM: tegra: export usb phy symbols   Stephen Warren
• [PATCH 8/8] ARM: tegra: HACK: remove set_irq_flags() from driver   Stephen Warren
• [PATCH 6/8] ARM: tegra: USB_ULPI needs USB   Stephen Warren
• [PATCH] pinctrl: fix the pin descriptor kerneldoc   Stephen Warren
• [PATCH] pinctrl: resurrect verbose pinmux-pins   Stephen Warren
• [PATCH] pinctrl: resurrect verbose pinmux-pins   Stephen Warren
• [PATCH] pinctrl: resurrect verbose pinmux-pins   Stephen Warren
• [PATCH v2 0/6] ARM: Tegra: cleanup patches from Arnd Bergmann   Stephen Warren
• [PATCH v2 0/6] ARM: Tegra: cleanup patches from Arnd Bergmann   Stephen Warren
• [PATCH v3 0/5] ARM: Tegra: cleanup patches from Arnd Bergmann   Stephen Warren
• [alsa-devel] [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Stephen Warren
• [PATCH v3 04/10] arm/tegra: Fix PWM clock programming   Stephen Warren
• [PATCH v3 07/10] arm/tegra: Add PWFM controller device tree probing   Stephen Warren
• What's in tegra.git for 3.4   Stephen Warren
• [RFC PATCH] of: DMA helpers: manage generic requests specification   Stephen Warren
• [PATCH v3 07/10] arm/tegra: Add PWFM controller device tree probing   Stephen Warren
• [PATCH] ARM: tegra: update defconfig   Stephen Warren
• [PATCH V2] ARM: tegra: update defconfig   Stephen Warren
• [PATCH V2 1/3] Documentation/gpio.txt: Explain expected pinctrl interaction   Stephen Warren
• [PATCH V2 2/3] pinctrl: allow concurrent gpio and mux function ownership of pins   Stephen Warren
• [PATCH V2 3/3] gpio: tegra: Hide tegra_gpio_enable/disable()   Stephen Warren
• [PATCH] MAINTAINERS: update my email address   Stephen Warren
• [PATCH/RFC 1/2] arm/tegra: fix harmony pinmux for PCIe   Stephen Warren
• [PATCH/RFC 2/2] arm/tegra: add timeout to PCIe PLL lock detection loop   Stephen Warren
• [PATCH V2 3/3] gpio: tegra: Hide tegra_gpio_enable/disable()   Stephen Warren
• obtaining a regulator from a phandle   Stephen Warren
• [PATCH] pinctrl: include machine header to core.h   Stephen Warren
• [alsa-devel] [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver   Stephen Warren
• [PATCH] pinctrl: split pincontrol states into its own header   Stephen Warren
• [PATCH 1/3] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Stephen Warren
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Stephen Warren
• [PATCH 3/3] ARM: Allow the user to enable UIMAGE_KERNEL_NOLOAD   Stephen Warren
• [PATCH 1/3] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Stephen Warren
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Stephen Warren
• [PATCH 1/3] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Stephen Warren
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Stephen Warren
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Stephen Warren
• [RESEND PATCH 0/3] arm: tegra: dts: USB Updates for Tegra legacy mode / OTG   Stephen Warren
• [PATCH 1/4] pinctrl: introduce generic pin config   Stephen Warren
• [PATCH 3/4] pinctrl: support pinconfig on the U300   Stephen Warren
• [PATCH 4/4] ARM: u300: configure some pins as an example   Stephen Warren
• [PATCH 08/11] ARM: tegra: Move tegra_pcie_xclk_clamp() to PMC   Stephen Warren
• [PATCH 09/11] ARM: tegra: Rewrite PCIe support as a driver   Stephen Warren
• [PATCH 10/11] ARM: tegra: pcie: Add MSI support   Stephen Warren
• [PATCH 11/11] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [PATCH 09/11] ARM: tegra: Rewrite PCIe support as a driver   Stephen Warren
• [PATCH 10/11] ARM: tegra: pcie: Add MSI support   Stephen Warren
• [PATCH 11/11] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [PATCH 10/11] ARM: tegra: pcie: Add MSI support   Stephen Warren
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Stephen Warren
• [PATCH v2 2/2] arm/tegra: add timeout to PCIe PLL lock detection loop   Stephen Warren
• [PATCH V2 2/3] pinctrl: allow concurrent gpio and mux function ownership of pins   Stephen Warren
• [PATCH] pinctrl: fix error path in pinconf_map_to_setting()   Stephen Warren
• [PATCH] arm/tegra: pcie: fix return value of function   Stephen Warren
• [RFC PATCH] of: DMA helpers: manage generic requests specification   Stephen Warren
• [PATCH] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Stephen Warren
• [PATCH] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH] ARM: tegra: Include assembler.h in sleep.S to fix build break   Stephen Warren
• [PATCH] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH] ARM: tegra: Include assembler.h in sleep.S to fix build break   Stephen Warren
• [PATCH] ARM: tegra: Include assembler.h in sleep.S to fix build break   Stephen Warren
• [PATCH] gpio: tegra: tegra_gpio_config shouldn't be __init   Stephen Warren
• [PATCH] ARM: tegra: Fix device tree AUXDATA for USB/EHCI   Stephen Warren
• [PATCH 1/5] pinctrl: add samsung pinctrl and gpiolib driver   Stephen Warren
• [PATCH 5/5] mmc: sdhci-s3c: setup pins using pinctrl interface   Stephen Warren
• [PATCH 1/4 v7] pinctrl: introduce generic pin config   Stephen Warren
• [PATCH v4 01/10] PWM: add pwm framework support   Stephen Warren
• [PATCH v4 03/10] pwm: Add device tree support   Stephen Warren
• [PATCH v4 04/10] ARM: tegra: Fix PWM clock programming   Stephen Warren
• [PATCH v4 05/10] ARM: tegra: Provide clock for only one PWM controller   Stephen Warren
• [PATCH v4 06/10] pwm: Add NVIDIA Tegra SoC support   Stephen Warren
• [PATCH v4 07/10] pwm: tegra: Add device tree support   Stephen Warren
• [PATCH v4 10/10] pwm-backlight: Add rudimentary device tree support   Stephen Warren
• [PATCH v4 10/10] pwm-backlight: Add rudimentary device tree support   Stephen Warren
• [PATCH v4 05/10] ARM: tegra: Provide clock for only one PWM controller   Stephen Warren
• [PATCH v4 07/10] pwm: tegra: Add device tree support   Stephen Warren
• [PATCH v2 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH v4 10/10] pwm-backlight: Add rudimentary device tree support   Stephen Warren
• [PATCH] ARM: tegra: Include assembler.h in sleep.S to fix build break   Stephen Warren
• [PATCH] ARM: tegra: Include assembler.h in sleep.S to fix build break   Stephen Warren
• [GIT PULL] USB AUXDATA fix for tegra   Stephen Warren
• [PATCH] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Stephen Warren
• [PATCH 2/2] ARM: GIC: Create common infrastructure for GIC DT bindings   Stephen Warren
• uImage with integrated dtb file   Stephen Warren
• [GIT PULL] ARM: tegra: Include assembler.h in sleep.S to fix build break   Stephen Warren
• [RFC] pinctrl: Replace list_groups() with get_groups_count()   Stephen Warren
• [RFC] pinctrl: Replace list_groups() with get_groups_count()   Stephen Warren
• [PATCH v3 6/6] mmc: sdhci-s3c: Add device tree support   Stephen Warren
• [PATCH] pinctrl: Replace list_*() with get_*_count()   Stephen Warren
• [PATCH v5 08/16] pwm: Add NVIDIA Tegra SoC support   Stephen Warren
• [PATCH v5 09/16] pwm: tegra: Add device tree support   Stephen Warren
• [PATCH v5 15/16] pwm-backlight: Add rudimentary device tree support   Stephen Warren
• [PATCH 00/11] ARM: tegra: GPIO and pinmux-related changes   Stephen Warren
• [PATCH 01/11] usb: ehci-tegra: Add vbus_gpio to platform data   Stephen Warren
• [PATCH 02/11] ARM: tegra: Remove VBUS_GPIO handling from board files   Stephen Warren
• [PATCH 03/11] gpio: tegra: fix register address calculations for Tegra30   Stephen Warren
• [PATCH 04/11] gpio: tegra: Iterate over the correct number of banks   Stephen Warren
• [PATCH 05/11] gpio: tegra: configure pins during irq_set_type   Stephen Warren
• [PATCH 06/11] ARM: tegra: seaboard: Don't gpio_request() ISL29018_IRQ   Stephen Warren
• [PATCH 07/11] gpio: tegra: Hide tegra_gpio_enable/disable()   Stephen Warren
• [PATCH 08/11] ARM: tegra: Switch to new pinctrl driver   Stephen Warren
• [PATCH 09/11] ARM: tegra: Remove pre-pinctrl pinmux driver   Stephen Warren
• [PATCH 10/11] ARM: dt: tegra cardhu: add pinmux to device tree   Stephen Warren
• [PATCH 11/11] ARM: dt: tegra20: add pinmux to device tree   Stephen Warren
• [RFC] i.MX: drop secondary clocks   Lothar Waßmann
• [RFC] i.MX: drop secondary clocks   Lothar Waßmann
• [RFC] i.MX: drop secondary clocks   Lothar Waßmann
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Lothar Waßmann
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Lothar Waßmann
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Lothar Waßmann
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Lothar Waßmann
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Lothar Waßmann
• [PATCH v1 1/5] ARM: imx28: add basic dt support   Lothar Waßmann
• [PATCH] ARM: mxs: enforce semantics of clk_prepare()/clk_unprepare() and clk_enable()/clk_disable()   Lothar Waßmann
• [PATCH 1/1] ARM iMX28: incorrect frac/div calculation   Lothar Waßmann
• [PATCH 08/10] um: Fix possible race on task->mm   Richard Weinberger
• [PATCH 09/10] um: Properly check all process' threads for a live mm   Richard Weinberger
• [PATCH 07/10] um: Should hold tasklist_lock while traversing processes   Richard Weinberger
• [PATCH v4 04/11] ep93xx: Use ioremap for backlight driver   Mika Westerberg
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Mika Westerberg
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Mika Westerberg
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Mika Westerberg
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Mika Westerberg
• [PATCH] arm: ep93xx: use DEFINE_RES_* macros   Mika Westerberg
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Mika Westerberg
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Mika Westerberg
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Mika Westerberg
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Mika Westerberg
• [PATCH] ep93xx: Implement double buffering for M2M DMA channels   Mika Westerberg
• [PATCH] mach-ux500: Crypto: core support for CRYP/HASH module   Andreas Westin
• [PATCH] mach-ux500: Crypto: core support for CRYP/HASH module.   Andreas Westin
• [PATCH V2] iop-adma: Corrected array overflow in RAID6 Xscale(R) test.   Williams, Dan J
• [PATCH 1/1] of: introduce helper to manage boolean   Scott Wood
• [PATCH V2 3/3] ARM: kirkwood: Define NAND partitions in dts   Scott Wood
• [PATCH V2 3/3] ARM: kirkwood: Define NAND partitions in dts   Scott Wood
• [PATCH 1/3] led-class: change back LEDS_CLASS to tristate instead of bool   Bryan Wu
• [PATCH 2/3] led-triggers: use atomic kzalloc during led trigger registering   Bryan Wu
• [PATCH 3/3] led-triggers: create a trigger for CPU activity   Bryan Wu
• [PATCH] leds: kill CONFIG_LEDS_CLASS option   Bryan Wu
• [PATCH 2/3] led-triggers: use atomic kzalloc during led trigger registering   Bryan Wu
• [PATCH 1/3] led-class: change back LEDS_CLASS to tristate instead of bool   Bryan Wu
• [PATCH 1/3] led-class: change back LEDS_CLASS to tristate instead of bool   Bryan Wu
• [PATCH 2/3] led-triggers: use atomic kzalloc during led trigger registering   Bryan Wu
• [PATCH 3/3] led-triggers: create a trigger for CPU activity   Bryan Wu
• Question：Leds handling in drivers   Bryan Wu
• [PATCH v5 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
• [PATCH 01/18] led-triggers: create a trigger for CPU activity   Bryan Wu
• [PATCH 02/18] ARM: at91: convert old leds drivers to gpio_led and led_trigger drivers   Bryan Wu
• [PATCH 03/18] ARM: mach-realview and mach-versatile: retire custom LED code   Bryan Wu
• [PATCH 04/18] ARM: mach-ks8695: remove leds driver, since nobody use it   Bryan Wu
• [PATCH 05/18] ARM: mach-shark: retire custom LED code   Bryan Wu
• [PATCH 06/18] ARM: mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger   Bryan Wu
• [PATCH 07/18] ARM: mach-integrator: move CM_CTRL to header file for accessing by other functions   Bryan Wu
• [PATCH 08/18] ARM: mach-integrator: retire custom LED code   Bryan Wu
• [PATCH 09/18] ARM: mach-clps711x: retire custom LED code of P720T machine   Bryan Wu
• [PATCH 10/18] ARM: mach-ebsa110: retire custom LED code   Bryan Wu
• [PATCH 11/18] ARM: mach-footbridge: retire custom LED code   Bryan Wu
• [PATCH 12/18] char: nwflash: remove old led event code   Bryan Wu
• [PATCH 13/18] ARM: mach-pxa: retire custom LED code   Bryan Wu
• [PATCH 14/18] ARM: plat-samsung: remove including old leds event API header file   Bryan Wu
• [PATCH 15/18] ARM: mach-pnx4008: remove including old leds event API header file   Bryan Wu
• [PATCH 16/18] ARM: mach-omap1: retire custom LED code   Bryan Wu
• [PATCH 17/18] ARM: mach-sa1100: retire custom LED code   Bryan Wu
• [PATCH 18/18] ARM: use new LEDS CPU trigger stub to replace old one   Bryan Wu
• Pre-merge-window status of the arm-soc tree   Rafael J. Wysocki
• [GIT PULL 2/4] Samsung devel-pd for v3.4   Rafael J. Wysocki
• [INFO] : Hibernation and Resume between 2 similar devices   Rafael J. Wysocki
• [PATCH 10/10] ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/   Rafael J. Wysocki
• linux-next: manual merge of the arm-soc tree with Linus' tree   Rafael J. Wysocki
• [PATCH v8 0/8] Consolidate cpuidle functionality   Rafael J. Wysocki
• [PATCH 1/4] Input: pxa27x_keypad keep clock on as wakeup source   Chao Xie
• [PATCH 2/4] Input: pxa27x_keypad bug fix for direct_key_mask   Chao Xie
• [PATCH 3/4] Input: pxa27x_keypad direct key may be low active   Chao Xie
• [PATCH 4/4] Input: pxa27x_keypad add choice to set direct_key_mask   Chao Xie
• [PATCH 4/4] Input: pxa27x_keypad add choice to set direct_key_mask   Chao Xie
• [PATCH V2 1/4] Input: pxa27x_keypad keep clock on as wakeup source   Chao Xie
• [PATCH V2 2/4] Input: pxa27x_keypad bug fix for direct_key_mask   Chao Xie
• [PATCH V2 3/4] Input: pxa27x_keypad direct key may be low active   Chao Xie
• [PATCH V2 4/4] Input: pxa27x_keypad add choice to set direct_key_mask   Chao Xie
• [PATCH V3 1/4] Input: pxa27x_keypad keep clock on as wakeup source   Chao Xie
• [PATCH V3 2/4] Input: pxa27x_keypad bug fix for direct_key_mask   Chao Xie
• [PATCH V3 3/4] Input: pxa27x_keypad direct key may be low active   Chao Xie
• [PATCH V3 4/4] Input: pxa27x_keypad add choice to set direct_key_mask   Chao Xie
• [PATCH 6/6] hwrng: Kconfig: remove dependency for atmel-rng driver   Herbert Xu
• [PATCH] Kbuild: centralize MKIMAGE and cmd_uimage definitions   Guan Xueao
• [PATCH 2/3] Kbuild: Implement CONFIG_UIMAGE_KERNEL_NOLOAD   Guan Xuetao
• [PATCHv2 09/14] Unicore32: adapt for dma_map_ops changes   Guan Xuetao
• [PATCH] GPMC: add ECC control definitions   Yegor Yefremov
• [PATCH]: arm/dts: OMAP4: Add Variscite OMAP4 System-On-Modeule support   Uri Yosef
• [PATCH v2] pxa/hx4700: Fix basic suspend/resume   Philipp Zabel
• [PATCH] pxa/hx4700: Remove pcmcia platform_device structure   Philipp Zabel
• [PATCH v3] pxa/hx4700: Fix basic suspend/resume   Philipp Zabel
• [PATCH] pxa: Remove INIT_CLKREG macro, replace it with the equivalent CLKDEV_INIT   Philipp Zabel
• [PATCH] pxa/hx4700: fix the LCD initialization   Philipp Zabel
• [RFC/PATCH 0/4] pxa: attempt at switch to common clock framework   Philipp Zabel
• [RFC/PATCH 1/4] pxa: Remove INIT_CLKREG macro, replace it with the equivalent CLKDEV_INIT   Philipp Zabel
• [RFC/PATCH 2/4] pxa2xx: move clkops definitions into a separate object file   Philipp Zabel
• [RFC/PATCH 3/4] pxa2xx: checkpatch fixes for clock-pxa25x.c and clock-pxa27x.c   Philipp Zabel
• [RFC/PATCH 4/4] pxa: convert to common clock framework   Philipp Zabel
• [RFC/PATCH 4/4] pxa: convert to common clock framework   Philipp Zabel
• [PATCH] pxa/hx4700: fix the LCD initialization   Philipp Zabel
• [RFC/PATCH 4/4] pxa: convert to common clock framework   Philipp Zabel
• [RFC/PATCH 4/4] pxa: convert to common clock framework   Philipp Zabel
• [PATCH 1/8] clk: add a fixed factor clock   Philipp Zabel
• [PATCH 1/8] clk: add a fixed factor clock   Philipp Zabel
• [PATCH v6 1/5] Extcon (external connector): import Android's switch class and modify.   Dima Zavin
• [PATCH v5 2/4] clk: Kconfig: add entry for HAVE_CLK_PREPARE   Richard Zhao
• [PATCH v5 3/4] clk: introduce the common clock framework   Richard Zhao
• [PATCH v5 0/4] common clk framework   Richard Zhao
• [RFC] i.MX: drop secondary clocks   Richard Zhao
• [PATCH v6 2/3] clk: introduce the common clock framework   Richard Zhao
• [PATCH 0/2] improve imx6q arm_clk set rate   Richard Zhao
• [PATCH 1/2] ARM: imx6q: add pll round_rate support   Richard Zhao
• [PATCH 2/2] ARM: imx6q: change pll1 rate when change arm_clk rate   Richard Zhao
• [PATCH v6 3/3] clk: basic clock hardware types   Richard Zhao
• [PATCH 1/2] ARM: imx6q: add pll round_rate support   Richard Zhao
• [PATCH 1/2] ARM: imx6q: add pll round_rate support   Richard Zhao
• [PATCH 1/2] ARM: imx6q: add pll round_rate support   Richard Zhao
• [PATCH v7 3/3] clk: basic clock hardware types   Richard Zhao
• [PATCH 1/2] ARM: imx6q: add pll round_rate support   Richard Zhao
• [PATCH 1/2] ARM: imx6q: add pll round_rate support   Richard Zhao
• [PATCH 0/2] change lpj in arm smp common code   Richard Zhao
• [PATCH] ASoC: sgtl5000: fix power on/off of MIC bias   Zeng Zhaoming
• [alsa-devel] [PATCH] ASoC: sgtl5000: fix power on/off of MIC bias   Zeng Zhaoming
• [PATCH] ARM: BCMRING: Fix static IO mapping   JD (Jiandong) Zheng
• [PATCH] ARM: BCMRING: Add debug macro   JD (Jiandong) Zheng
• [PATCH 0/8] ARM: mmp: support OF on pxa168   Haojian Zhuang
• [PATCH 1/8] gpio: pxa: add OF support   Haojian Zhuang
• [PATCH 2/8] serial: pxa: add OF support   Haojian Zhuang
• [PATCH 3/8] rtc: sa1100: add OF support   Haojian Zhuang
• [PATCH 4/8] i2c: pxa: add OF support   Haojian Zhuang
• [PATCH 5/8] ARM: mmp: enable rtc clk in pxa168   Haojian Zhuang
• [PATCH 6/8] ARM: mmp: append OF support on pxa168   Haojian Zhuang
• [PATCH 7/8] ARM: dts: append DTS file of pxa168   Haojian Zhuang
• [PATCH 8/8] Document: devicetree: add OF documents for arch-mmp   Haojian Zhuang
• [PATCH 3/8] rtc: sa1100: add OF support   Haojian Zhuang
• [PATCH 2/8] serial: pxa: add OF support   Haojian Zhuang
• Status of gpio-pxa driver and dummy clock   Haojian Zhuang
• [PATCH v2 0/7] ARM: mmp: support OF on pxa168   Haojian Zhuang
• [PATCH v2 1/7] serial: pxa: add OF support   Haojian Zhuang
• [PATCH v2 2/7] rtc: sa1100: add OF support   Haojian Zhuang
• [PATCH v2 3/7] i2c: pxa: add OF support   Haojian Zhuang
• [PATCH v2 4/7] ARM: mmp: enable rtc clk in pxa168   Haojian Zhuang
• [PATCH v2 5/7] ARM: mmp: append OF support on pxa168   Haojian Zhuang
• [PATCH v2 6/7] ARM: dts: append DTS file of pxa168   Haojian Zhuang
• [PATCH v2 7/7] Document: devicetree: add OF documents for arch-mmp   Haojian Zhuang
• Status of gpio-pxa driver and dummy clock   Haojian Zhuang
• [PATCH v2 1/7] serial: pxa: add OF support   Haojian Zhuang
• [PATCH v3 1/7] serial: pxa: add OF support   Haojian Zhuang
• [PATCH] mfd: pcap: depend on arch-pxa   Haojian Zhuang
• [GIT PULL][v3.4] pull request on pxa tree for DT branch   Haojian Zhuang
• [PATCH 0/2] Remove bq24022 driver superseeded by gpio-regulator   Haojian Zhuang
• [GIT PULL][v3.4] pull request on arch-pxa for regulator branch   Haojian Zhuang
• [GIT revert][v3.4] revert 43de6a7dd in pxa/board branch   Haojian Zhuang
• [GIT PULL][v3.3] pull request on arch-pxa tree with fix branch   Haojian Zhuang
• [GIT PULL][for v3.4]pull request from arch-pxa tree with rtc branch   Haojian Zhuang
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Haojian Zhuang
• [GIT PULL][v3.4] pull request on arch-pxa for regulator branch   Haojian Zhuang
• [GIT PULL][v3.4] pull request on arch-pxa for regulator branch   Haojian Zhuang
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Haojian Zhuang
• [PATCH v3 1/7] serial: pxa: add OF support   Haojian Zhuang
• [PATCH v3 1/6] serial: pxa: add OF support   Haojian Zhuang
• [GIT PULL][v3.4] pull request on pxa tree for DT branch   Haojian Zhuang
• [GIT PULL v2][for v3.4] request pull from arch-pxa on regulator branch   Haojian Zhuang
• [PATCH 3/4] ARM: create a common IOMEM definition   Haojian Zhuang
• [PATCH] pxa/hx4700: Reduce sleep mode power consumption by 35%   Haojian Zhuang
• [PATCH] pxa/hx4700: Remove pcmcia platform_device structure   Haojian Zhuang
• [PATCH] pxa/hx4700: Remove pcmcia platform_device structure   Haojian Zhuang
• [PATCH] pxa/hx4700: Remove unwanted request for GPIO105   Haojian Zhuang
• [PATCH] pxa/hx4700: Remove pcmcia platform_device structure   Haojian Zhuang
• [PATCH] MAINTAINERS: update maintainer entry for pxa/hx4700   Haojian Zhuang
• [PATCH v2] pxa/hx4700: Reduce sleep mode battery discharge by 35%   Haojian Zhuang
• [PATCH] ARM: pxa: fix regulator related build fail in magician_defconfig   Haojian Zhuang
• [GIT PULL][for v3.4] pull request from board-specific branch in arch-pxa   Haojian Zhuang
• [GIT PULL][for 3.4] pull request from fixes-non-critical branch in arch-pxa git   Haojian Zhuang
• [PATCH] mfd: pcap: depend on arch-pxa   Haojian Zhuang
• [PATCH] pxa/hx4700: Add standard UART to hx4700_pin_config[]   Haojian Zhuang
• [PATCH 1/2] ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol   Haojian Zhuang
• [PATCH 1/2] ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol   Haojian Zhuang
• [GIT PULL][for 3.4] pull request from arch-pxa git for board branch   Haojian Zhuang
• [GIT PULL][for 3.4] pull request from arch-pxa git for board branch   Haojian Zhuang
• [PATCH] ARM: pxa: fix regulator related build fail in magician_defconfig   Haojian Zhuang
• [GIT PULL] pull request from arch-pxa git on fixes branch   Haojian Zhuang
• [PATCH] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Haojian Zhuang
• [PATCH v3] ARM: pxa: fix build failure for regulator consumer in em-x270.c   Haojian Zhuang
• [GIT PULL] pull request from arch-pxa git on fixes branch   Haojian Zhuang
• How to add GPIO outputs to the PXA2xx MFP configuration?   Haojian Zhuang
• [PATCH V2 1/4] Input: pxa27x_keypad keep clock on as wakeup source   Haojian Zhuang
• [PATCH V2 4/4] Input: pxa27x_keypad add choice to set direct_key_mask   Haojian Zhuang
• How to add GPIO outputs to the PXA2xx MFP configuration?   Haojian Zhuang
• How to add GPIO outputs to the PXA2xx MFP configuration?   Haojian Zhuang
• [PATCH 01/10] cpu: Introduce clear_tasks_mm_cpumask() helper   Peter Zijlstra
• [PATCH 07/10] um: Should hold tasklist_lock while traversing processes   Peter Zijlstra
• [PATCH 10/10] oom: Make find_lock_task_mm() sparse-aware   Peter Zijlstra
• [PATCH 10/10] oom: Make find_lock_task_mm() sparse-aware   Peter Zijlstra
• [PATCH v2.1 01/10] cpu: Introduce clear_tasks_mm_cpumask() helper   Peter Zijlstra
• [PATCH v2.1 01/10] cpu: Introduce clear_tasks_mm_cpumask() helper   Peter Zijlstra
• [PATCH 1/2] ARM: fix builds due to missing <asm/system_misc.h> includes   Wan ZongShun
• Conflict between Versatile Express DT conversion and local timer updates   Marc Zyngier
• Conflict between Versatile Express DT conversion and local timer updates   Marc Zyngier
• Conflict between Versatile Express DT conversion and local timer updates   Marc Zyngier
• Conflict between Versatile Express DT conversion and local timer updates   Marc Zyngier
• Conflict between Versatile Express DT conversion and local timer updates   Marc Zyngier
• [PATCH 07/10] ARM: ux500: Provide local timer support for Device Tree   Marc Zyngier
• [PATCH v4 09/15] ARM: ux500: convert to twd_local_timer_register() interface   Marc Zyngier
• [PATCH -next] ARM: ux500: fix compilation after local timer rework   Marc Zyngier
• [PATCH 0/3] atmel-mci fixes   ludovic.desroches at atmel.com
• [PATCH 1/3] mmc: atmel-mci: correct data timeout computation   ludovic.desroches at atmel.com
• [PATCH 2/3] mmc: atmel-mci: r/w proof capability only available since v2xx   ludovic.desroches at atmel.com
• [PATCH 3/3] mmc: atmel-mci: add support for odd clock dividers   ludovic.desroches at atmel.com
• [PATCH 0/4] atmel-mci device tree support   ludovic.desroches at atmel.com
• [PATCH 1/4] mmc: atmel-mci: add device tree support   ludovic.desroches at atmel.com
• [PATCH 2/4] arm: at91: at91sam9x5 add mci clk_lookup   ludovic.desroches at atmel.com
• [PATCH 3/4] arm: at91: dt: sam9x5 add mci support   ludovic.desroches at atmel.com
• [PATCH 4/4] arm: at91: dt: sam9g25ek add mci support   ludovic.desroches at atmel.com
• [PATCH v2 0/3] atmel-mci device tree support   ludovic.desroches at atmel.com
• [PATCH v2 1/3] mmc: atmel-mci: add device tree support   ludovic.desroches at atmel.com
• [PATCH v2 2/3] arm: at91: at91sam9x5 add mci support   ludovic.desroches at atmel.com
• [PATCH v2 3/3] arm: at91: dt: sam9g25ek add mci support   ludovic.desroches at atmel.com
• [PATCH v2 1/3] mmc: atmel-mci: correct data timeout computation   ludovic.desroches at atmel.com
• [PATCH 7/7] Minor compiling fix   carson bill
• [PATCH 7/7] Minor compiling fix   bill4carson
• [PATCH 1/7] Add various hugetlb arm high level hooks   bill4carson
• soft lockup on omap3 (dm3730)   jean-philippe francois
• soft lockup on omap3 (dm3730)   jean-philippe francois
• soft lockup on omap3 (dm3730)   jean-philippe francois
• Regression in 3.2.9 for omap-serial (at least)   jean-philippe francois
• Regression in 3.2.9 for omap-serial (at least)   jean-philippe francois
• ARM926EJS boot failure on v3.3, __iounmap   jonsmirl at gmail.com
• ARM926EJS boot failure on v3.3, __iounmap   jonsmirl at gmail.com
• ARM926EJS boot failure on v3.3, __iounmap   jonsmirl at gmail.com
• Device tree and IO map_desc.   jonsmirl at gmail.com
• Device tree and IO map_desc.   jonsmirl at gmail.com
• ioremap to a specific virtual address   jonsmirl at gmail.com
• ioremap to a specific virtual address   jonsmirl at gmail.com
• ioremap to a specific virtual address   jonsmirl at gmail.com
• ioremap to a specific virtual address   jonsmirl at gmail.com
• ioremap to a specific virtual address   jonsmirl at gmail.com
• ioremap to a specific virtual address   jonsmirl at gmail.com
• ioremap to a specific virtual address   jonsmirl at gmail.com
• ioremap to a specific virtual address   jonsmirl at gmail.com
• ioremap to a specific virtual address   jonsmirl at gmail.com
• ioremap to a specific virtual address   jonsmirl at gmail.com
• ioremap to a specific virtual address   jonsmirl at gmail.com
• [PATCH] ARM: at91: Export at91_ramc_base   manabian at gmail.com
• [PATCH] ARM: at91: resurrect mach-at91/include/mach/io.h   manabian at gmail.com
• [PATCH v2] GPMC: add ECC control definitions   yegorslists at googlemail.com
• implementing "suspend to ram" on cortex A8 based on linux 3.0.8   yang gqyang
• [MX25][MMC] mmc esdhc failure in 3.3-rc5 (still present in rc7)   joancarles
• [PATCH] iomux-mx25.h slew rate adjusted for LCD __LD pins   joancarles
• AW: [PATCH] iomux-mx25.h slew rate adjusted for LCD __LD pins   joancarles
• [MX25][MMC] mmc esdhc failure in 3.3   joancarles
• [MX25][MMC] mmc esdhc failure in 3.3   joancarles
• [MX25][MMC] mmc esdhc failure in 3.3   joancarles
• [MX25][MMC] mmc esdhc failure in 3.3   joancarles
• [MX25][MMC] mmc esdhc failure in 3.3   joancarles
• [MX25][MMC] mmc esdhc failure in 3.3   joancarles
• [MX25][MMC] mmc esdhc failure in 3.3   joancarles
• [PATCH 12/15] watchdog/mpcore_wdt: Add support for WDIOF_CARDRESET   viresh kumar
• [PATCH 10/15] watchdog/mpcore_wdt: Add support for dev_pm_ops interface   viresh kumar
• [PATCH 14/15] watchdog/mpcore_wdt: Add clock framework support   viresh kumar
• [PATCH 14/15] watchdog/mpcore_wdt: Add clock framework support   viresh kumar
• [PATCH 00/15] watchdog/mpcore: updates & fixes   viresh kumar
• [PATCH 14/15] watchdog/mpcore_wdt: Add clock framework support   viresh kumar
• [PATCH v3] serial: PL011: clear pending interrupts   viresh kumar
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   viresh kumar
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   viresh kumar
• [PATCH v3] serial: PL011: clear pending interrupts   viresh kumar
• [PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards   viresh kumar
• [PATCH] serial: PL011: move interrupt clearing   viresh kumar
• [PATCH] serial: PL011: move interrupt clearing   viresh kumar
• [PATCH 1/2] ARM: VIC: Create common infrastructure for vic DT bindings   viresh kumar
• [RFC] pinctrl: Replace list_groups() with get_groups_count()   viresh kumar
• [PATCH 0/9] omap randconfig fixes for v3.3   mathieu.poirier at linaro.org
• [PATCH 1/9] arm/omap: enable building omap2 without omap2420/2430   mathieu.poirier at linaro.org
• [PATCH 2/9] omap: fix visibility of omap2_mbox_iva_priv   mathieu.poirier at linaro.org
• [PATCH 3/9] ARM: omap2/n8x0: work around modular omap mmc   mathieu.poirier at linaro.org
• [PATCH 4/9] ARM: omap2+: fix building without i2c   mathieu.poirier at linaro.org
• [PATCH 5/9] tty/serial/omap: console can only be built-in   mathieu.poirier at linaro.org
• [PATCH 6/9] omap2: select twl4030 support on boards that need it   mathieu.poirier at linaro.org
• [PATCH 7/9] omap2plus: ensure that one of omap2/3/4 is selected   mathieu.poirier at linaro.org
• [PATCH 8/9] arm: OMAP depends on MMU   mathieu.poirier at linaro.org
• [PATCH 9/9] ARM: omap: select CPU_FREQ_TABLE where needed   mathieu.poirier at linaro.org
• [PATCH] CPUIdle: Reevaluate C-states under CPU load to favor deeper C-states   melwyn lobo
• （3月15日深圳会议）科技项目专项资金申报暨企业知识产权管理战略及专利运用   ncocbax
• [PATCH 0/6] ARM: OMAP3+: smartreflex: add class support   jean.pihet at newoldbits.com
• [PATCH 1/6] ARM: OMAP3+: SmartReflex: introduce class init, deinit and priv data   jean.pihet at newoldbits.com
• [PATCH 2/6] ARM: OMAP3+: SmartReflex: introduce notifiers flags   jean.pihet at newoldbits.com
• [PATCH 3/6] ARM: OMAP3+: SmartReflex: introduce notifier_control   jean.pihet at newoldbits.com
• [PATCH 4/6] ARM: OMAP3+: SmartReflex: disable spamming interrupts   jean.pihet at newoldbits.com
• [PATCH 5/6] ARM: OMAP3+: SmartReflex: introduce class private data per voltage domain   jean.pihet at newoldbits.com
• [PATCH 6/6] ARM: OMAP3+: SmartReflex Class3: restrict CPU to run on   jean.pihet at newoldbits.com
• [PATCH 00/10] PM: Create the AVS class of drivers   jean.pihet at newoldbits.com
• [PATCH 01/10] ARM: OMAP3+: voltage: export functions to plat/voltage.h   jean.pihet at newoldbits.com
• [PATCH 02/10] ARM: OMAP2+: SmartReflex: move the platform specific macros in plat-omap   jean.pihet at newoldbits.com
• [PATCH 03/10] ARM: OMAP3+: SmartReflex: class drivers should use struct omap_sr *   jean.pihet at newoldbits.com
• [PATCH 04/10] ARM: OMAP2+: smartreflex: Use the names from hwmod data instead of voltage domains.   jean.pihet at newoldbits.com
• [PATCH 05/10] ARM: OMAP3: hwmod: rename the smartreflex entries   jean.pihet at newoldbits.com
• [PATCH 06/10] ARM: OMAP2+: SmartReflex: use the platform header file for voltage functions   jean.pihet at newoldbits.com
• [PATCH 07/10] ARM: OMAP2+: SmartReflex: introduce a busy loop condition test macro   jean.pihet at newoldbits.com
• [PATCH 08/10] ARM: OMAP2+: SmartReflex: Use per-OPP data structure   jean.pihet at newoldbits.com
• [PATCH 09/10] ARM: OMAP2+: SmartReflex: add POWER_AVS Kconfig options   jean.pihet at newoldbits.com
• [PATCH 10/10] ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/   jean.pihet at newoldbits.com
• [PATCH v2 0/9] PM: Create the AVS class of drivers   jean.pihet at newoldbits.com
• [PATCH 1/9] ARM: OMAP3+: voltage: export functions to plat/voltage.h   jean.pihet at newoldbits.com
• [PATCH 2/9] ARM: OMAP2+: SmartReflex: move the driver specific macros in include/linux/power   jean.pihet at newoldbits.com
• [PATCH 3/9] ARM: OMAP3+: SmartReflex: class drivers should use struct omap_sr *   jean.pihet at newoldbits.com
• [PATCH 4/9] ARM: OMAP2+: smartreflex: Use the names from hwmod data instead of voltage domains.   jean.pihet at newoldbits.com
• [PATCH 5/9] ARM: OMAP3: hwmod: rename the smartreflex entries   jean.pihet at newoldbits.com
• [PATCH 6/9] ARM: OMAP2+: SmartReflex: introduce a busy loop condition test macro   jean.pihet at newoldbits.com
• [PATCH 7/9] ARM: OMAP2+: SmartReflex: Use per-OPP data structure   jean.pihet at newoldbits.com
• [PATCH 8/9] ARM: OMAP2+: SmartReflex: add POWER_AVS Kconfig options   jean.pihet at newoldbits.com
• [PATCH 9/9] ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/   jean.pihet at newoldbits.com
• [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support   s.hauer at pengutronix.de
• [PATCH v1 1/5] ARM: imx28: add basic dt support   s.hauer at pengutronix.de
• [PATCH v1 1/5] ARM: imx28: add basic dt support   s.hauer at pengutronix.de
• [INFO] : Hibernation and Resume between 2 similar devices   Valdis.Kletnieks at vt.edu