[PATCH] ARM: fix lcd power build failure in collie_defconfig

[Paul Gortmaker]

Commit 086ada54abaa4316e8603f02410fe8ebc9ba2de1 (linux-next)

  "FB: sa1100: remove global sa1100fb_.*_power function pointers"

got rid of all instances but one in locomolcd.c -- which was
conditional on CONFIG_SA1100_COLLIE.  The associated .power
field which replaces the global is populated in mach-sa1100/collie.c
so move the assignment there, but make it conditional on the
locomolcd support, so use CONFIG_BACKLIGHT_LOCOMO in that file.

Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>

diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 48885b7..c7f418b 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -313,6 +313,10 @@ static struct sa1100fb_mach_info collie_lcd_info = {
 
 	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
 	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+#ifdef CONFIG_BACKLIGHT_LOCOMO
+	.lcd_power	= locomolcd_power
+#endif
 };
 
 static void __init collie_init(void)
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 52acda7..f33679d 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/collie.h
  *
- * This file contains the hardware specific definitions for Assabet
+ * This file contains the hardware specific definitions for Collie
  * Only include this file from SA1100-specific files.
  *
  * ChangeLog:
@@ -13,6 +13,7 @@
 #ifndef __ASM_ARCH_COLLIE_H
 #define __ASM_ARCH_COLLIE_H
 
+extern void locomolcd_power(int on);
 
 #define COLLIE_SCOOP_GPIO_BASE	(GPIO_MAX + 1)
 #define COLLIE_GPIO_CHARGE_ON	(COLLIE_SCOOP_GPIO_BASE + 0)
diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c
index be20b5c..3a6d541 100644
--- a/drivers/video/backlight/locomolcd.c
+++ b/drivers/video/backlight/locomolcd.c
@@ -229,14 +229,7 @@ static struct locomo_driver poodle_lcd_driver = {
 
 static int __init locomolcd_init(void)
 {
-	int ret = locomo_driver_register(&poodle_lcd_driver);
-	if (ret)
-		return ret;
-
-#ifdef CONFIG_SA1100_COLLIE
-	sa1100fb_lcd_power = locomolcd_power;
-#endif
-	return 0;
+	return locomo_driver_register(&poodle_lcd_driver);
 }
 
 static void __exit locomolcd_exit(void)
-- 
1.7.9.1