[PATCHv4 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file

[Rajendra Nayak]

On Tuesday 06 March 2012 11:14 AM, Nishanth Menon wrote:
> On 17:17-20120302, Tero Kristo wrote:
>> From: Vishwanath BS<vishwanath.bs at ti.com>
>>
>> Since IO Daisychain modifies only PRM registers, it makes sense to move
>> it to PRM File. Also changed the timeout value for IO chain enable to
>> 100us and added a wait for status disable at the end.
>>
> [...]
>> +/*
>> + * Maximum time(us) it takes to output the signal WUCLKOUT of the last pad of
>> + * the I/O ring after asserting WUCLKIN high
>> + */
>> +#define MAX_IOPAD_LATCH_TIME 100
>> +
>> +/* OMAP3 Daisychain enable sequence */
>> +void omap3_trigger_io_chain(void)
>> +{
>> +	int i = 0;
>> +
>> +	omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
>> +				   PM_WKEN);
>> +	/* Do a readback to assure write has been done */
>> +	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
>> +
>> +	omap_test_timeout(((omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST)&
>> +			    OMAP3430_ST_IO_CHAIN_MASK) == 1),
> umm
> arch/arm/mach-omap2/prm-regbits-34xx.h:#define OMAP3430_ST_IO_CHAIN_MASK
> (1<<  16)
> (reg&  (1<<  16)) == 1
> will ever be true?

good catch. Its should actually be '((reg & (1 << 16)) >> 16) == 1'
This is fixed in the omap4_trigger_io() function, looks like is missed
here.

>