[PATCHv4 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file

[Tero Kristo]

On Tue, 2012-03-06 at 11:30 +0530, Rajendra Nayak wrote:
> On Tuesday 06 March 2012 11:14 AM, Nishanth Menon wrote:
> > On 17:17-20120302, Tero Kristo wrote:
> >> From: Vishwanath BS<vishwanath.bs at ti.com>
> >>
> >> Since IO Daisychain modifies only PRM registers, it makes sense to move
> >> it to PRM File. Also changed the timeout value for IO chain enable to
> >> 100us and added a wait for status disable at the end.
> >>
> > [...]
> >> +/*
> >> + * Maximum time(us) it takes to output the signal WUCLKOUT of the last pad of
> >> + * the I/O ring after asserting WUCLKIN high
> >> + */
> >> +#define MAX_IOPAD_LATCH_TIME 100
> >> +
> >> +/* OMAP3 Daisychain enable sequence */
> >> +void omap3_trigger_io_chain(void)
> >> +{
> >> +	int i = 0;
> >> +
> >> +	omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
> >> +				   PM_WKEN);
> >> +	/* Do a readback to assure write has been done */
> >> +	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
> >> +
> >> +	omap_test_timeout(((omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST)&
> >> +			    OMAP3430_ST_IO_CHAIN_MASK) == 1),
> > umm
> > arch/arm/mach-omap2/prm-regbits-34xx.h:#define OMAP3430_ST_IO_CHAIN_MASK
> > (1<<  16)
> > (reg&  (1<<  16)) == 1
> > will ever be true?
> 
> good catch. Its should actually be '((reg & (1 << 16)) >> 16) == 1'
> This is fixed in the omap4_trigger_io() function, looks like is missed
> here.

I'll fix this for next version.

-Tero