[PATCH 0/2] Add support for DNS-320 and DNS-325 using devicetree

[Jamie Lentin]

As agreed with Arnd Bergmann and Jason Cooper, include any board setup that
cannot be done in devicetree in board-dt.c, then replace with devicetree
entries.

The NAND driver is converted to devicetree as part of this patch series, 
although I don't feel qualified to explain the parameters actually mean so 
have left documentation fields blank.

The patches should apply cleanly to staging/kirkwood/dt, although 
kirkwood-dns320.dts attempts to override the orion-wdt definition with a
lower TCLK, even though the orion-wdt work isn't merged yet. If this would
be better to remove I shall.

Cheers,

Jamie Lentin (2):
  ARM: kirkwood: Basic support for DNS-320 and DNS-325
  ARM: kirkwood: Convert orion-nand to fdt

 .../devicetree/bindings/mtd/orion-nand.txt         |   41 +++
 arch/arm/boot/dts/kirkwood-dns320.dts              |   96 +++++++
 arch/arm/boot/dts/kirkwood-dns325.dts              |   82 ++++++
 arch/arm/mach-kirkwood/Kconfig                     |   18 ++
 arch/arm/mach-kirkwood/Makefile.boot               |    2 +
 arch/arm/mach-kirkwood/board-dt.c                  |  264 ++++++++++++++++++++
 arch/arm/mach-kirkwood/common.c                    |    6 +
 drivers/mtd/nand/orion_nand.c                      |   39 +++-
 8 files changed, 546 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/orion-nand.txt
 create mode 100644 arch/arm/boot/dts/kirkwood-dns320.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-dns325.dts

-- 
1.7.9.1