[PATCH 1/5 v2] ARM: kirkwood: covert orion-spi to fdt.
Michael Walle
michael at walle.cc
Sun Mar 4 13:12:20 EST 2012
Am Freitag 02 März 2012, 18:50:18 schrieb Jason Cooper:
> On the Globalscale Dreamplug (Marvell Kirkwood Development Platform),
> 2MB of NOR flash are used to hold the bootloader, bootloader
> environment, and devicetree blob. It is connected via spi.
>
> Signed-off-by: Jason Cooper <jason at lakedaemon.net>
> ---
>
> Changes from v1:
>
> - used of_match_ptr() as suggested by Grant Likely
>
> arch/arm/boot/dts/kirkwood-dreamplug.dts | 34 +++++++++++++++++++++++++
> arch/arm/mach-kirkwood/board-dt.c | 40
> ------------------------------ arch/arm/mach-kirkwood/common.c |
> 11 ++++++++
> drivers/spi/spi-orion.c | 37
> ++++++++++++++++++++++++--- 4 files changed, 78 insertions(+), 44
> deletions(-)
>
> diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts
> b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 8a5dff8..bdf2ddc 100644
> --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
> +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
> @@ -22,4 +22,38 @@
> interrupts = <33>;
> clock-frequency = <200000000>;
> };
> +
> + spi at f1010600 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + compatible = "marvell,orion-spi";
> + reg = <0xf1010600 0x1ff>;
> + clock-frequency = <200000000>;
> +
> + flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + compatible = "macronix,mx25l1606e", "jedec-flash";
> +
> + spi-max-frequency = <50000000>;
> + reg = <0>;
> +
> + partition at 0 {
> + label = "U-Boot";
> + reg = <0x0 0x100000>;
> + };
> +
> + partition at 100000 {
> + label = "U-Boot Environment";
> + reg = <0x100000 0x080000>;
> + };
> +
> + partition at 180000 {
> + label = "Flattened Device Tree";
> + reg = <0x180000 0x080000>;
> + };
> + };
> + };
> };
> diff --git a/arch/arm/mach-kirkwood/board-dt.c
> b/arch/arm/mach-kirkwood/board-dt.c index fbe6405..4960e63 100644
> --- a/arch/arm/mach-kirkwood/board-dt.c
> +++ b/arch/arm/mach-kirkwood/board-dt.c
> @@ -39,42 +39,6 @@ static struct of_device_id kirkwood_dt_match_table[]
> __initdata = { { }
> };
>
> -struct mtd_partition dreamplug_partitions[] = {
> - {
> - .name = "u-boot",
> - .size = SZ_512K,
> - .offset = 0,
> - },
> - {
> - .name = "u-boot env",
> - .size = SZ_64K,
> - .offset = SZ_512K + SZ_512K,
> - },
> - {
> - .name = "dtb",
> - .size = SZ_64K,
> - .offset = SZ_512K + SZ_512K + SZ_512K,
> - },
> -};
> -
> -static const struct flash_platform_data dreamplug_spi_slave_data = {
> - .type = "mx25l1606e",
> - .name = "spi_flash",
> - .parts = dreamplug_partitions,
> - .nr_parts = ARRAY_SIZE(dreamplug_partitions),
> -};
> -
> -static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
> - {
> - .modalias = "m25p80",
> - .platform_data = &dreamplug_spi_slave_data,
> - .irq = -1,
> - .max_speed_hz = 50000000,
> - .bus_num = 0,
> - .chip_select = 0,
> - },
> -};
> -
> static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
> .phy_addr = MV643XX_ETH_PHY_ADDR(0),
> };
> @@ -140,10 +104,6 @@ static void __init dreamplug_init(void)
> */
> kirkwood_mpp_conf(dreamplug_mpp_config);
>
> - spi_register_board_info(dreamplug_spi_slave_info,
> - ARRAY_SIZE(dreamplug_spi_slave_info));
> - kirkwood_spi_init();
> -
> kirkwood_ehci_init();
> kirkwood_ge00_init(&dreamplug_ge00_data);
> kirkwood_ge01_init(&dreamplug_ge01_data);
> diff --git a/arch/arm/mach-kirkwood/common.c
> b/arch/arm/mach-kirkwood/common.c index cc15426..357fcde 100644
> --- a/arch/arm/mach-kirkwood/common.c
> +++ b/arch/arm/mach-kirkwood/common.c
> @@ -15,6 +15,7 @@
> #include <linux/ata_platform.h>
> #include <linux/mtd/nand.h>
> #include <linux/dma-mapping.h>
> +#include <linux/of.h>
> #include <net/dsa.h>
> #include <asm/page.h>
> #include <asm/timex.h>
> @@ -481,6 +482,9 @@ static int __init kirkwood_clock_gate(void)
> {
> unsigned int curr = readl(CLOCK_GATING_CTRL);
> u32 dev, rev;
> +#ifdef CONFIG_OF
> + struct device_node *dp;
> +#endif
>
> kirkwood_pcie_id(&dev, &rev);
> printk(KERN_DEBUG "Gating clock of unused units\n");
> @@ -524,6 +528,13 @@ static int __init kirkwood_clock_gate(void)
> } else /* keep this bit set for devices that don't have PCIe1 */
> kirkwood_clk_ctrl |= CGC_PEX1;
>
> +#ifdef CONFIG_OF
> + dp = of_find_node_by_path("/");
> + if (dp && of_device_is_available(of_find_compatible_node(dp, NULL,
> + "marvell,orion-
spi")))
> + kirkwood_clk_ctrl |= CGC_RUNIT;
> +#endif
> +
> /* Now gate clock the required units */
> writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
> printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
> diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
> index 13448c8..acfb240 100644
> --- a/drivers/spi/spi-orion.c
> +++ b/drivers/spi/spi-orion.c
> @@ -18,6 +18,7 @@
> #include <linux/spi/spi.h>
> #include <linux/spi/orion_spi.h>
> #include <linux/module.h>
> +#include <linux/of_device.h>
> #include <asm/unaligned.h>
>
> #define DRIVER_NAME "orion_spi"
> @@ -45,6 +46,8 @@ struct orion_spi {
> void __iomem *base;
> unsigned int max_speed;
> unsigned int min_speed;
> + unsigned int tclk;
> + unsigned int clock_fix;
> struct orion_spi_info *spi_info;
> };
>
> @@ -104,7 +107,7 @@ static int orion_spi_baudrate_set(struct spi_device
> *spi, unsigned int speed)
>
> orion_spi = spi_master_get_devdata(spi->master);
>
> - tclk_hz = orion_spi->spi_info->tclk;
> + tclk_hz = orion_spi->tclk;
>
> /*
> * the supported rates are: 4,6,8...30
> @@ -360,7 +363,7 @@ static int orion_spi_setup(struct spi_device *spi)
> orion_spi = spi_master_get_devdata(spi->master);
>
> /* Fix ac timing if required. */
> - if (orion_spi->spi_info->enable_clock_fix)
> + if (orion_spi->clock_fix)
> orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
> (1 << 14));
>
> @@ -474,6 +477,7 @@ static int __init orion_spi_probe(struct
> platform_device *pdev) master->setup = orion_spi_setup;
> master->transfer = orion_spi_transfer;
> master->num_chipselect = ORION_NUM_CHIPSELECTS;
> + master->dev.of_node = pdev->dev.of_node;
>
> dev_set_drvdata(&pdev->dev, master);
>
> @@ -481,8 +485,26 @@ static int __init orion_spi_probe(struct
> platform_device *pdev) spi->master = master;
> spi->spi_info = spi_info;
>
> - spi->max_speed = DIV_ROUND_UP(spi_info->tclk, 4);
> - spi->min_speed = DIV_ROUND_UP(spi_info->tclk, 30);
> + if (spi_info)
> + spi->tclk = spi_info->tclk;
> +
> + of_property_read_u32(master->dev.of_node,
> + "clock-frequency", &spi->tclk);
> +
> + if (!spi->tclk) {
> + dev_err(&pdev->dev, "cannot set clock rate\n");
shouldn't you check the return value of of_property_read_u32 instead? and
report a more meaningful error message, eg no valid clock-frequency property
in the OF case?
> + status = -EINVAL;
> + goto out;
> + }
> +
> + spi->max_speed = DIV_ROUND_UP(spi->tclk, 4);
> + spi->min_speed = DIV_ROUND_UP(spi->tclk, 30);
> +
> + if (spi_info)
> + spi->clock_fix = spi_info->enable_clock_fix;
> +
> + if (of_find_property(master->dev.of_node, "spi-clock-fix", NULL))
> + spi->clock_fix = 1;
>
> r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (r == NULL) {
> @@ -541,10 +563,17 @@ static int __exit orion_spi_remove(struct
> platform_device *pdev)
>
> MODULE_ALIAS("platform:" DRIVER_NAME);
>
#ifdef CONFIG_OF
> +static struct of_device_id spi_orion_of_match_table[] __devinitdata = {
> + { .compatible = "marvell,orion-spi", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, spi_orion_of_match_table);
#endif
> static struct platform_driver orion_spi_driver = {
> .driver = {
> .name = DRIVER_NAME,
> .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(spi_orion_of_match_table),
> },
> .remove = __exit_p(orion_spi_remove),
> };
--
Michael
More information about the linux-arm-kernel
mailing list