[PATCH] ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci

Kukjin Kim kgene.kim at samsung.com
Wed Mar 7 10:54:09 EST 2012


On 03/07/12 06:01, Marek Szyprowski wrote:
> Hello,
>
> On Wednesday, March 07, 2012 2:20 PM Kukjin Kim wrote:
>
>> On 03/06/12 01:51, Kukjin Kim wrote:
>>> On 03/05/12 18:29, Jaehoon Chung wrote:
>>>> Hi Kukjin.
>>>>
>>>> Is it merged?
>>>>
>>>> Best Regards,
>>>> Jaehoon Chung
>>>>
>>>> On 02/24/2012 06:56 PM, Thomas Abraham wrote:
>>>>
>>>>> On 23 February 2012 11:18, Jaehoon Chung<jh80.chung at samsung.com>  wrote:
>>>>>> Thomas Arbrahams's patchset have changed the device name in sdhci-s3c.c
>>>>>> (mmc: sdhci-s3c: Rework platform data and add device tree support)
>>>>>> But didn't change the regulator_consumer name.
>>>>>> So maybe didn't initialize the mmc/sd card for exynos4.
>>>>>>
>>>>>> This patch is fixed that (based-on linux-samsung for-next branch)
>>>>>>
>>>>>> Signed-off-by: Jaehoon Chung<jh80.chung at samsung.com>
>>>>>> Signed-off-by: kyungmin Park<kyungmin.park at samsung.com>
>>>>>> ---
>>>>>> arch/arm/mach-exynos/mach-nuri.c | 4 ++--
>>>>>> arch/arm/mach-exynos/mach-universal_c210.c | 2 +-
>>>>>> 2 files changed, 3 insertions(+), 3 deletions(-)
>>>>>>
>>>>>> diff --git a/arch/arm/mach-exynos/mach-nuri.c
>>>>>> b/arch/arm/mach-exynos/mach-nuri.c
>>>>>> index a6b9162..251dd7a 100644
>>>>>> --- a/arch/arm/mach-exynos/mach-nuri.c
>>>>>> +++ b/arch/arm/mach-exynos/mach-nuri.c
>>>>>> @@ -116,7 +116,7 @@ static struct s3c_sdhci_platdata
>>>>>> nuri_hsmmc0_data __initdata = {
>>>>>> };
>>>>>>
>>>>>> static struct regulator_consumer_supply emmc_supplies[] = {
>>>>>> - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
>>>>>> + REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
>>>>>> REGULATOR_SUPPLY("vmmc", "dw_mmc"),
>>>>>> };
>>>>>>
>>>>>> @@ -415,7 +415,7 @@ static struct regulator_consumer_supply
>>>>>> __initdata max8997_ldo12_[] = {
>>>>>> REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
>>>>>> };
>>>>>> static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
>>>>>> - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), /* TFLASH */
>>>>>> + REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.2"), /* TFLASH */
>>>>>> };
>>>>>> static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
>>>>>> REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
>>>>>> diff --git a/arch/arm/mach-exynos/mach-universal_c210.c
>>>>>> b/arch/arm/mach-exynos/mach-universal_c210.c
>>>>>> index 6017a21..320cb1d 100644
>>>>>> --- a/arch/arm/mach-exynos/mach-universal_c210.c
>>>>>> +++ b/arch/arm/mach-exynos/mach-universal_c210.c
>>>>>> @@ -749,7 +749,7 @@ static struct s3c_sdhci_platdata
>>>>>> universal_hsmmc0_data __initdata = {
>>>>>> };
>>>>>>
>>>>>> static struct regulator_consumer_supply mmc0_supplies[] = {
>>>>>> - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
>>>>>> + REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
>>>>>> };
>>>>>>
>>>>>> static struct regulator_init_data mmc0_fixed_voltage_init_data = {
>>>>>
>>>>> Reviewed-by: Thomas Abraham<thomas.abraham at linaro.org>
>>>
>>> Looks OK, will apply.
>>>
>>
>> (Cc'ed Marek)
>>
>> Hi Kyungmin, Marek and Jaehoon,
>>
>> As you know, same patches have been submitted duplicated and this should
>> be fixed. Which one would be better to send upstream?
>
> For me it doesn't matter, I just need this fix to get merged, because otherwise
> the Universal C210 and Nuri boards are dysfunctional.
>
> You can select the one prepared by Jaehoon if You like.

OK, thanks :)

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.



More information about the linux-arm-kernel mailing list