[PATCH 2/2] clk: Move init fields from clk to clk_hw

[Saravana Kannan]

On Tue, March 20, 2012 2:40 am, Sascha Hauer wrote:
> On Tue, Mar 20, 2012 at 12:54:55AM -0700, Saravana Kannan wrote:
>>
>> On Tue, March 20, 2012 12:20 am, Shawn Guo wrote:
>> > On Mon, Mar 19, 2012 at 08:38:26PM -0700, Saravana Kannan wrote:
>> >> This has a couple of advantages:
>> >> * Completely hides struct clk from many clock platform drivers and
>> >> static
>> >>   clock initialization code.
>> >> * Simplifies the generic clk_register() function and allows adding
>> >> optional
>> >>   fields in the future without modifying the function signature.
>> >> * Allows for simpler static initialization of clocks on all platforms
>> by
>> >>   removing the need for forward delcarations.
>> >> * Halves the number of symbols added for each static clock
>> >> initialization.
>> >>
>> >> Signed-off-by: Saravana Kannan <skannan at codeaurora.org>
>> >
>> > I agree this is a reasonable move.  But while you simplify the
>> interface
>> > of clk_register(), why not making a further step to simplify the
>> > following interfaces simple too?
>> >
>> > struct clk *clk_register_fixed_rate(struct device *dev, const char
>> *name,
>> >                 const char *parent_name, unsigned long flags,
>> >                 unsigned long fixed_rate);
>> > struct clk *clk_register_gate(struct device *dev, const char *name,
>> >                 const char *parent_name, unsigned long flags,
>> >                 void __iomem *reg, u8 bit_idx,
>> >                 u8 clk_gate_flags, spinlock_t *lock);
>> > struct clk *clk_register_divider(struct device *dev, const char *name,
>> >                 const char *parent_name, unsigned long flags,
>> >                 void __iomem *reg, u8 shift, u8 width,
>> >                 u8 clk_divider_flags, spinlock_t *lock);
>> > struct clk *clk_register_mux(struct device *dev, const char *name,
>> >                 char **parent_names, u8 num_parents, unsigned long
>> flags,
>> >                 void __iomem *reg, u8 shift, u8 width,
>> >                 u8 clk_mux_flags, spinlock_t *lock);
>>
>> If you simplify those functions further. They would just become
>> clk_register(). I'm not sure I see a value in them in at that point or
>> even in their current form. But if others see (I'm guessing since they
>> acked or didn't nack it), I'm not going to ask to remove them. If
>> everyone
>> agrees that we should just remove them, I would be glad to.
>>
>> It's arguable that these functions for the common hardware types saves
>> the
>> need to deal with the kalloc in every platform driver. But it's not
>> clear
>> to me where they would get these parameters in the first place. Most
>> likely form some sort of static array. At which point, it might as well
>> be
>> a static array of pointers to clk_gated.hw, clk_fixed_rate.hw, etc
>> instead
>> of a platform specific  struct to hold these initializers.
>
> I am using these functions and don't need a static array, I just call
> the functions with the desired parameters.

Sure, then let's leave it in. Curious, where do you get the desired
parameters from? Is it static date in code or is it from DT? You somehow
probe it?

> Overall the clock framework was written in a way that we have to expose
> as little information about the internally used structs as necessary. It
> seems your patches are pulling in the opposite direction now.

I'm not exposing anything that you don't already pass from the platform
driver. Also, you realize that this is very similar to what you suggested
with clk_initializer right? If there is a strong push, we can make a copy
of these inside the struct clk, but for these few init fields I don't see
a point (see earlier email).

-Saravana


-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.