[PATCH 0/3] OMAP2+: UART: Enable tx wakeup + remove cpu checks

[Raja, Govindraj]

Hi Paul,

On Fri, Mar 23, 2012 at 5:10 AM, Paul Walmsley <paul at pwsan.com> wrote:
> Hi
>
> On Thu, 22 Mar 2012, Raja, Govindraj wrote:
>
>> Sorry I for got to add that, here are details on what was tested.
>>
>> 1.) OMAP2430 SDP : Boot tested with uart1 as console.
>>
>> 2.) OMAP3430 SDP: Boot test, suspend/resume tests, retention off mode
>>                                (checking retention and off mode count
>> in cpu idle cases)
>>
>> 3.) OMAP3630 - Beagle XM:  Boot test, suspend/resume tests, retention off mode
>>                                             (checking retention and
>> off mode count in cpu idle cases)
>>
>> 4.) OMAP4430 - PANDA: Boot test, suspend/resume tests
>>
>> 5.) OMAP4460 - PANDA: Boot test.
>
> What kernel .config was used for these tests?

omap2plus_defconfig was used.

the same kernel image was tested with all these boards.
(kernel image was built along with initramfs support
using minimal busybox filesystem)

--
Thanks,
Govindraj.R