[PATCH] ARM: S3C24XX: add support for second irq set of S3C2416
Heiko Stübner
heiko at sntech.de
Sat Mar 3 16:19:45 EST 2012
The S3C2416 has a separate second interrupt register-set to support
additional irqs. This patch adds the necessary constants and registers
the irq handlers for it.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
Patch should go on top of the current s3c24xx consolidation
arch/arm/mach-s3c24xx/include/mach/irqs.h | 15 ++++-
arch/arm/mach-s3c24xx/irq-s3c2416.c | 98 ++++++++++++++++++++++++++
arch/arm/mach-s3c24xx/s3c2416.c | 1 +
arch/arm/plat-samsung/include/plat/s3c2416.h | 3 +
4 files changed, 116 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h
index e53b217..e120576 100644
--- a/arch/arm/mach-s3c24xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h
@@ -134,6 +134,17 @@
#define IRQ_S32416_WDT S3C2410_IRQSUB(27)
#define IRQ_S32416_AC97 S3C2410_IRQSUB(28)
+/* second interrupt-register of s3c2416/s3c2450 */
+
+#define S3C2416_IRQ(x) S3C2410_IRQ((x)+54+29)
+#define IRQ_S3C2416_2D S3C2416_IRQ(0)
+#define IRQ_S3C2416_IIC1 S3C2416_IRQ(1)
+#define IRQ_S3C2416_RESERVED2 S3C2416_IRQ(2)
+#define IRQ_S3C2416_RESERVED3 S3C2416_IRQ(3)
+#define IRQ_S3C2416_PCM0 S3C2416_IRQ(4)
+#define IRQ_S3C2416_PCM1 S3C2416_IRQ(5)
+#define IRQ_S3C2416_I2S0 S3C2416_IRQ(6)
+#define IRQ_S3C2416_I2S1 S3C2416_IRQ(7)
/* extra irqs for s3c2440 */
@@ -175,7 +186,9 @@
#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27)
#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28)
-#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#if defined(CONFIG_CPU_S3C2416)
+#define NR_IRQS (IRQ_S3C2416_I2S1+1)
+#elif defined(CONFIG_CPU_S3C2443)
#define NR_IRQS (IRQ_S3C2443_AC97+1)
#else
#define NR_IRQS (IRQ_S3C2440_AC97+1)
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2416.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c
index fd49f35..d92f879 100644
--- a/arch/arm/mach-s3c24xx/irq-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c2416.c
@@ -27,6 +27,7 @@
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/io.h>
+#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -192,6 +193,43 @@ static struct irq_chip s3c2416_irq_uart3 = {
.irq_ack = s3c2416_irq_uart3_ack,
};
+/* second interrupt register */
+
+static inline void s3c2416_irq_ack_second(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
+
+ __raw_writel(bitval, S3C2416_SRCPND2);
+ __raw_writel(bitval, S3C2416_INTPND2);
+}
+
+static void s3c2416_irq_mask_second(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2416_INTMSK2);
+ mask |= bitval;
+ __raw_writel(mask, S3C2416_INTMSK2);
+}
+
+static void s3c2416_irq_unmask_second(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2416_INTMSK2);
+ mask &= ~bitval;
+ __raw_writel(mask, S3C2416_INTMSK2);
+}
+
+struct irq_chip s3c2416_irq_second = {
+ .irq_ack = s3c2416_irq_ack_second,
+ .irq_mask = s3c2416_irq_mask_second,
+ .irq_unmask = s3c2416_irq_unmask_second,
+};
+
+
/* IRQ initialisation code */
static int __init s3c2416_add_sub(unsigned int base,
@@ -213,6 +251,42 @@ static int __init s3c2416_add_sub(unsigned int base,
return 0;
}
+static void __init s3c2416_add_second(void)
+{
+ unsigned long pend;
+ unsigned long last;
+ int irqno;
+ int i;
+
+ /* first, clear all interrupts pending... */
+ last = 0;
+ for (i = 0; i < 4; i++) {
+ pend = __raw_readl(S3C2416_INTPND2);
+
+ if (pend == 0 || pend == last)
+ break;
+
+ __raw_writel(pend, S3C2416_SRCPND2);
+ __raw_writel(pend, S3C2416_INTPND2);
+ printk(KERN_INFO "irq: clearing pending status %08x\n",
+ (int)pend);
+ last = pend;
+ }
+
+ for (irqno = IRQ_S3C2416_2D; irqno <= IRQ_S3C2416_I2S1; irqno++) {
+ switch (irqno) {
+ case IRQ_S3C2416_RESERVED2:
+ case IRQ_S3C2416_RESERVED3:
+ /* no IRQ here */
+ break;
+ default:
+ irq_set_chip_and_handler(irqno, &s3c2416_irq_second,
+ handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+ }
+}
+
static int __init s3c2416_irq_add(struct device *dev,
struct subsys_interface *sif)
{
@@ -232,6 +306,8 @@ static int __init s3c2416_irq_add(struct device *dev,
&s3c2416_irq_wdtac97,
IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
+ s3c2416_add_second();
+
return 0;
}
@@ -248,3 +324,25 @@ static int __init s3c2416_irq_init(void)
arch_initcall(s3c2416_irq_init);
+#ifdef CONFIG_PM
+static struct sleep_save irq_save[] = {
+ SAVE_ITEM(S3C2416_INTMSK2),
+};
+
+int s3c2416_irq_suspend(void)
+{
+ s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+ return 0;
+}
+
+void s3c2416_irq_resume(void)
+{
+ s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+}
+
+struct syscore_ops s3c2416_irq_syscore_ops = {
+ .suspend = s3c2416_irq_suspend,
+ .resume = s3c2416_irq_resume,
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index 0e9a71c..694977e 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -105,6 +105,7 @@ int __init s3c2416_init(void)
register_syscore_ops(&s3c2416_pm_syscore_ops);
#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
+ register_syscore_ops(&s3c2416_irq_syscore_ops);
return device_register(&s3c2416_dev);
}
diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h
index de2b5bd..7178e33 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2416.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2416.h
@@ -24,6 +24,9 @@ extern void s3c2416_init_clocks(int xtal);
extern int s3c2416_baseclk_add(void);
extern void s3c2416_restart(char mode, const char *cmd);
+
+extern struct syscore_ops s3c2416_irq_syscore_ops;
+
#else
#define s3c2416_init_clocks NULL
#define s3c2416_init_uarts NULL
--
1.7.2.3
More information about the linux-arm-kernel
mailing list