[PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards

[Viresh Kumar]

Other than Arnd's comments:

On 3/13/2012 8:17 PM, Stefan Roese wrote:

> diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts
> new file mode 100644
> index 0000000..f92d099
> --- /dev/null
> +++ b/arch/arm/boot/dts/spear600-evb.dts
> @@ -0,0 +1,23 @@
> +/*
> + * Copyright 2011 Freescale Semiconductor, Inc.
> + * Copyright 2011 Linaro Ltd.
> + *

Just for knowledge, why are above two here? Is including them suggested for
all dts files?

> + * Copyright 2012 Stefan Roese <sr at denx.de>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +


> diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig
> index ff4ae5b..7777f72 100644
> --- a/arch/arm/mach-spear6xx/Kconfig
> +++ b/arch/arm/mach-spear6xx/Kconfig
> @@ -11,6 +11,13 @@ config BOARD_SPEAR600_EVB
>  	help
>  	  Supports ST SPEAr600 Evaluation Board
>  
> +config BOARD_SPEAR600_DT
> +	bool "SPEAr600 generic board configured via device-tree"
> +	select MACH_SPEAR600
> +	select USE_OF
> +	help
> +	  Supports ST SPEAr600 boards configured via the device-tree
> +
>  endmenu
>  
>  config MACH_SPEAR600
> diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile
> index cc1a4d8..e2d79b8 100644
> --- a/arch/arm/mach-spear6xx/Makefile
> +++ b/arch/arm/mach-spear6xx/Makefile
> @@ -10,3 +10,4 @@ obj-$(CONFIG_MACH_SPEAR600) += spear600.o
>  
>  # spear600 boards files
>  obj-$(CONFIG_BOARD_SPEAR600_EVB) += spear600_evb.o
> +obj-$(CONFIG_BOARD_SPEAR600_DT) += board-dt.o
> diff --git a/arch/arm/mach-spear6xx/board-dt.c b/arch/arm/mach-spear6xx/board-dt.c
> new file mode 100644
> index 0000000..ee4ff33
> --- /dev/null
> +++ b/arch/arm/mach-spear6xx/board-dt.c
> @@ -0,0 +1,75 @@
> +/*
> + * arch/arm/mach-spear6xx/board-dt.c
> + *
> + * Generic SPEAr600 platform support
> + *
> + * Copyright (C) 2009 ST Microelectronics
> + * Viresh Kumar<viresh.kumar at st.com>

                  ^
Thanks for this. Can add space here between r & <.

> + *
> + * Copyright 2012 Stefan Roese <sr at denx.de>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>

keeping header files in alphabetical order makes life easy at
later stages. :)

> +#include <asm/hardware/vic.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach-types.h>
> +#include <mach/generic.h>
> +#include <mach/hardware.h>
> +
> +static struct amba_device *amba_devs[] __initdata = {
> +	&gpio_device[0],
> +	&gpio_device[1],
> +	&gpio_device[2],
> +	&uart_device[0],
> +	&uart_device[1],
> +};
> +
> +static struct platform_device *plat_devs[] __initdata = {
> +};
> +
> +static void __init spear600_dt_init(void)
> +{
> +	unsigned int i;
> +
> +	/* call spear600 machine init function */
> +	spear600_init();
> +
> +	/* Add Platform Devices */
> +	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
> +
> +	/* Add Amba Devices */
> +	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
> +		amba_device_register(amba_devs[i], &iomem_resource);
> +}
> +
> +static const char *spear600_dt_board_compat[] = {
> +	"st,spear600-evb",
> +	NULL
> +};
> +
> +static const struct of_device_id vic_of_match[] __initconst = {
> +	{ .compatible = "arm,pl190-vic", .data = vic_of_init, },
> +	{ /* Sentinel */ }
> +};
> +
> +static void __init spear6xx_dt_init_irq(void)
> +{
> +	of_irq_init(vic_of_match);
> +}
> +

What about adding this routine in vic.c file, which can then be used 
by all platforms, instead of replicating this code.

> +DT_MACHINE_START(SPEAR600_DT, "ST-SPEAR600-DT")

It looks this is not a generic file for all boards, but for a
single board? And that would be evb only?

If above is true, we may name this file and internal stuff more
appropriately.

> +	.map_io		=	spear6xx_map_io,
> +	.init_irq	=	spear6xx_dt_init_irq,
> +	.handle_irq	=	vic_handle_irq,
> +	.timer		=	&spear6xx_timer,
> +	.init_machine	=	spear600_dt_init,
> +	.restart	=	spear_restart,
> +	.dt_compat	=	spear600_dt_board_compat,
> +MACHINE_END

Thanks for the patch. :)

-- 
viresh