[PATCH v3 2/4] ARM: OMAP2+: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()
Tarun Kanti DebBarma
tarun.kanti at ti.com
Thu Mar 29 06:01:55 EDT 2012
With dynamic allocation of IRQ the usage of OMAP_GPIO_IRQ
is no longer valid. We should be using gpio_to_irq() instead.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti at ti.com>
---
arch/arm/mach-omap2/board-2430sdp.c | 2 +-
arch/arm/mach-omap2/board-4430sdp.c | 2 +-
arch/arm/mach-omap2/board-apollon.c | 4 ++--
arch/arm/mach-omap2/board-devkit8000.c | 2 +-
arch/arm/mach-omap2/board-h4.c | 2 +-
arch/arm/mach-omap2/board-omap3evm.c | 2 +-
arch/arm/mach-omap2/board-omap4panda.c | 2 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 3 ++-
arch/arm/mach-omap2/board-zoom-debugboard.c | 3 ++-
arch/arm/mach-omap2/board-zoom-peripherals.c | 6 ++++--
arch/arm/mach-omap2/common-board-devices.c | 2 +-
11 files changed, 17 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 7370983..5a1b6af 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -230,12 +230,12 @@ static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
{
I2C_BOARD_INFO("isp1301_omap", 0x2D),
.flags = I2C_CLIENT_WAKE,
- .irq = OMAP_GPIO_IRQ(78),
},
};
static int __init omap2430_i2c_init(void)
{
+ sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
ARRAY_SIZE(sdp2430_i2c1_boardinfo));
omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 4e90715..a09c699 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -873,7 +873,6 @@ static void __init omap4_sdp4430_wifi_mux_init(void)
}
static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
- .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
.board_ref_clock = WL12XX_REFCLOCK_26,
.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
};
@@ -883,6 +882,7 @@ static void __init omap4_sdp4430_wifi_init(void)
int ret;
omap4_sdp4430_wifi_mux_init();
+ omap4_sdp4430_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data);
if (ret)
pr_err("Error setting wl12xx data: %d\n", ret);
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index ac77382..768ece2 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -136,8 +136,6 @@ static struct resource apollon_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
- .end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@@ -341,6 +339,8 @@ static void __init omap_apollon_init(void)
* You have to mux them off in device drivers later on
* if not needed.
*/
+ apollon_smc91x_resources[1].start = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
+ apollon_smc91x_resources[1].end = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index e873063..87cdb86 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -410,7 +410,6 @@ static struct resource omap_dm9000_resources[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
@@ -637,6 +636,7 @@ static void __init devkit8000_init(void)
omap_dm9000_init();
devkit8000_i2c_init();
+ omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ);
platform_add_devices(devkit8000_devices,
ARRAY_SIZE(devkit8000_devices));
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 54af800..0bbbabe 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -348,7 +348,6 @@ static struct at24_platform_data m24c01 = {
static struct i2c_board_info __initdata h4_i2c_board_info[] = {
{
I2C_BOARD_INFO("isp1301_omap", 0x2d),
- .irq = OMAP_GPIO_IRQ(125),
},
{ /* EEPROM on mainboard */
I2C_BOARD_INFO("24c01", 0x52),
@@ -377,6 +376,7 @@ static void __init omap_h4_init(void)
*/
board_mkp_init();
+ h4_i2c_board_info[0].irq = gpio_to_irq(125);
i2c_register_board_info(1, h4_i2c_board_info,
ARRAY_SIZE(h4_i2c_board_info));
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c877236..eed88a4 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -487,7 +487,6 @@ static struct platform_device omap3evm_wlan_regulator = {
};
struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
- .irq = OMAP_GPIO_IRQ(OMAP3EVM_WLAN_IRQ_GPIO),
.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
};
#endif
@@ -623,6 +622,7 @@ static void __init omap3_evm_wl12xx_init(void)
int ret;
/* WL12xx WLAN Init */
+ omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO);
ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 28fc271..4496007 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -199,7 +199,6 @@ static struct platform_device omap_vwlan_device = {
};
struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
- .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
/* PANDA ref clock is 38.4 MHz */
.board_ref_clock = 2,
};
@@ -494,6 +493,7 @@ static void __init omap4_panda_init(void)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
+ omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index acb4e77..1cec076 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -172,7 +172,6 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
.modalias = "tsc2005",
.bus_num = 1,
.chip_select = 0,
- .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
.max_speed_hz = 6000000,
.controller_data = &tsc2005_mcspi_config,
.platform_data = &tsc2005_pdata,
@@ -1124,6 +1123,8 @@ static void __init rx51_init_tsc2005(void)
"tsc2005 reset");
if (r >= 0) {
tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
+ rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq =
+ gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
} else {
printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset");
tsc2005_pdata.esd_timeout_ms = 0;
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 369c2eb..1e8540e 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -43,7 +43,6 @@ static inline void __init zoom_init_smsc911x(void)
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = ZOOM_UART_BASE,
- .irq = OMAP_GPIO_IRQ(102),
.flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
.irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
@@ -89,6 +88,8 @@ static inline void __init zoom_init_quaduart(void)
if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0)
printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
quart_gpio);
+
+ serial_platform_data[0].irq = gpio_to_irq(102);
}
static inline int omap_zoom_debugboard_detect(void)
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index c126461..a489f82 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -193,7 +193,6 @@ static struct platform_device omap_vwlan_device = {
};
static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
- .irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO),
/* ZOOM ref clock is 26 MHz */
.board_ref_clock = 1,
};
@@ -296,7 +295,10 @@ static void enable_board_wakeup_source(void)
void __init zoom_peripherals_init(void)
{
- int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
+ int ret;
+
+ omap_zoom_wlan_data.irq = gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO);
+ ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index bcb0c58..4cb17b4 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -79,7 +79,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
ads7846_config.gpio_pendown = gpio_pendown;
spi_bi->bus_num = bus_num;
- spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown);
+ spi_bi->irq = gpio_to_irq(gpio_pendown);
if (board_pdata)
spi_bi->platform_data = board_pdata;
--
1.7.0.4
More information about the linux-arm-kernel
mailing list