[PATCH 0/3] introduce stmp-style devices

[Wolfram Sang]

This series makes support for a certain type of devices mach independant. We
want that because such devices (having a special register layout) have been
found in mach-mxs and mach-mx6 meanwhile. Please refer to patch 1/3 for a more
detailed description.

Patch 1/3 adds the basic support and is of main interest to get upstream.
Patches 2/3 and 3/3 are usage examples and will be send to the relevant
subsystems once the basic support is accepted.

Main changes since the RFC:

* renamed the macros to STMP_OFFSET_*
* rebased to 3.3-rc6

Tested with a TX28 board.

Thanks,

   Wolfram

Wolfram Sang (3):
  drivers: base: add support for stmp-style devices
  i2c: mxs: use global reset function
  rtc: stmp3xxx: use global stmp_device functionality

 drivers/base/Kconfig         |    3 ++
 drivers/base/Makefile        |    1 +
 drivers/base/stmp_device.c   |   80 ++++++++++++++++++++++++++++++++++++++++++
 drivers/i2c/busses/Kconfig   |    1 +
 drivers/i2c/busses/i2c-mxs.c |    9 +----
 drivers/rtc/Kconfig          |    1 +
 drivers/rtc/rtc-stmp3xxx.c   |   29 +++++----------
 include/linux/stmp_device.h  |   19 ++++++++++
 8 files changed, 117 insertions(+), 26 deletions(-)
 create mode 100644 drivers/base/stmp_device.c
 create mode 100644 include/linux/stmp_device.h

-- 
1.7.9.1