[PATCH] ARM: dts: imx6q: add anatop regulators

[Ying-Chun Liu (PaulLiu)]

(2012年03月22日 15:45), Shawn Guo wrote:
>> +				};
>> +
>> +				regulator-1p1 at 110 {
>> +					compatible = "fsl,anatop-regulator";
>> +					regulator-name = "vdd1p1";
>> +					regulator-min-microvolt = <800000>;
>> +					regulator-max-microvolt = <1400000>;
>> +					regulator-always-on;
>> +					reg = <0x110>;
>> +					anatop-vol-bit-shift = <8>;
>> +					anatop-vol-bit-width = <5>;
>> +					anatop-min-bit-val = <4>;
>> +					anatop-min-voltage = <800000>;
>> +					anatop-max-voltage = <1400000>;
> 
> 1.375V

Hi Shawn,

Sorry, why it is not 1.4V?

LDO 1p1 should be from range 0.8V to 1.4V on section 53.3.1