[PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators

[Kevin Hilman]

Matt Porter <mporter at ti.com> writes:

> This fixes smsc911x support on platforms using gpmc_smsc911x_init().
>
> Commit c7e963f6888816 (net/smsc911x: Add regulator support) added
> the requirement that platforms provide vdd33a and vddvario supplies.
>
> Signed-off-by: Matt Porter <mporter at ti.com>

[...]

>  /*
>   * Initialize smsc911x device connected to the GPMC. Note that we
>   * assume that pin multiplexing is done in the board-*.c file,
> @@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
>  
>  	gpmc_cfg = board_data;
>  
> +	ret = platform_device_register(&gpmc_smsc911x_regulator);
> +	if (ret < 0) {
> +		pr_err("Unable to register smsc911x regulators: %d\n", ret);
> +		return;
> +	}
> +

Boards that have more than one instance of the smsc911x (OMAP3/Overo)
barf here because of trying to register the same device twice.

We need something like the patch below to make Overo boot again.

Kevin



>From 4114dea2fb897ab75d05eaa943d29454034fc025 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman at ti.com>
Date: Thu, 1 Mar 2012 12:30:42 -0800
Subject: [PATCH] ARM: OMAP2+: gpmc-smsc911x: only register regulators once

commit e4b0b2cbbb (ARM: OMAP2+: gpmc-smsc911x: add required smsc911x
regulators) added regulators which are registered during
gpmc_smsc911x_init().  However, some platforms (OMAP3/Overo) have more
than one instance of the SMSC911x and result in attempting to register
the same regulator more than once which causes a panic().  Fix this by
tracking the regulator registration ensuring only a single device is
registered.

Cc: Matt Porter <mporter at ti.com>
Signed-off-by: Kevin Hilman <khilman at ti.com>
---
 arch/arm/mach-omap2/gpmc-smsc911x.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index bbb870c..95e6c7d 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -88,6 +88,8 @@ static struct platform_device gpmc_smsc911x_regulator = {
 	},
 };
 
+static bool regulator_registered;
+
 /*
  * Initialize smsc911x device connected to the GPMC. Note that we
  * assume that pin multiplexing is done in the board-*.c file,
@@ -101,10 +103,14 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
 
 	gpmc_cfg = board_data;
 
-	ret = platform_device_register(&gpmc_smsc911x_regulator);
-	if (ret < 0) {
-		pr_err("Unable to register smsc911x regulators: %d\n", ret);
-		return;
+	if (!regulator_registered) {
+		ret = platform_device_register(&gpmc_smsc911x_regulator);
+		if (ret < 0) {
+			pr_err("Unable to register smsc911x regulators: %d\n",
+			       ret);
+			return;
+		}
+		regulator_registered = true;
 	}
 
 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
-- 
1.7.9.2